To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This completely hidden hitch keeps your Audi Q3 looking like it just came off the assembly line. Remove the receiver for a fully concealed look when you're not carrying your bikes to the trail. Only for use with hitch-mounted racks and carriers.
Features:
Specs:
Note: This rack receiver is for hitch-mounted accessories only. The receiver tube included with this hitch cannot be used for towing.
If you would like to upgrade this rack receiver for towing, you will need to purchase the Stealth Hitches towing kit (SH82VR - sold separately). The ball mount included in this kit inserts into the center block of the hitch in place of the receiver attachment. A 2" hitch ball is included with the ball mount, making it ready to tow with out of the box.
If you want to take your bikes to the trail with your family this summer, you have plenty of options. You can carry your bikes on top of your car with a roof rack, but that bulky rack can increase drag on your ride. You can use a trunk rack, but that's a pain to mount and it can scratch your car's paint. Or you can install a hitch on your ride and use a hitch-mounted bike rack to carry your bikes.
This rack receiver is designed to act as a mounting point for your hitch bike rack or cargo carrier. Just slide the shank of your carrier into the receiver for use, and when you're done you can not only remove the carrier, but the receiver as well, leaving your vehicle looking clean and unmodified.
Nothing can ruin the clean, stylish look of your vehicle like a giant piece of metal bolted beneath its bumper. Luckily, with the Stealth Hitches rack receiver, you never have to worry about messing up your vehicle's lines.
This hitch installs behind your bumper, keeping the cross tube concealed and leaving only the hitch receiver visible. Even better, the receiver can be easily removed from the cross tube when it's not in use so that you won't see any trace of the hitch. This means that you can retain that clean, from-the-factory look for your ride, while still being able to carry your bikes and gear on the next family road trip.
The receiver can be attached or detached in seconds with no tools required. To insert the receiver, simply pop the base up into the stainless steel block at the center of the hitch until it automatically latches in place.
Be sure to then press the lock on the side of the block to fully secure the receiver. When you're finished carrying your bikes or cargo, use the included key to unlock the latch. Then turn the handle on the block clockwise and remove the receiver. You can stow the receiver in a safe place, like your vehicle's rear cargo area, or you can use a convenient carrying case (391CASER - sold separately).
And when you're not using the receiver attachment, the included hitch plug covers the center block's opening to protect the hitch's body from dirt and debris.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it, and we've towed with it, so whatever your question, we can answer it.
Alternate Instructions
Tech Tip
The included receiver is not designed for trailer towing. The Towing Package Upgrade Kit, 391CONVC5 (sold separately), is required for towing capability. No drilling through vehicle frame required for installation , Requires temporary removal of bumper/fascia during installation
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (26 Customer Reviews)
This completely hidden hitch keeps your vehicle looking like it just came off the assembly line. Remove the receiver for a fully concealed look when you're not carrying your bikes to the trail. Only for use with hitch-mounted racks and carriers.
Unseen when not in use, but functions as a typical hitch when in use. I use it mostly to support a Kuat bicycle rack, but also to tow a cargo trailer. Flawless.
Really nice system, love it ... easy to install and retract receiver ... and completely hidden
Bolts right into place, all of the hardware needed is in the kit. The assembly videos were very helpful.
Excellent, sturdy product with understandable install instructions. You can't tell if the hitch is there by looking at the car until you need to put the bike rack on!
I removed 1 star mostly because of a shipping issue - the box was damaged during shipping and the ziploc that held all of the nuts and bolts was open, so most of that hardware was lost upon receipt. Luckily we had the packing list and were able to purchase at the local hardware store!
Relatively easy installation on my Q3. Just take your time with the bumper facia. I absolutely love the clean look. My only gripes are you need to spend a fair bit more money to make it tow worthy. I feel like at the premium price it should be ready to tow minus the wiring harness. I also wish the 2” receiver tucked a little closer to bumper so my bike rack was a bit closer, but that’s nit picking.
The hitch was exactly what I wanted for my Audi Q3. Installation was easy and the step-by-step documentation with pictures was great. Only issue I had was that there was nowhere on the hitch frame to attach the cellular antenna so I had to drill my own hole, but otherwise it was a breeze. Installing/removing the hitch rack accessory is very easy and secures my bike rack with no wobble or leaning. Very satisfied with this product and expect it to last for years to come!
WeGood product and eTrailer instructions were spot on.
Fit like a glove and is very well made. Installation was easy as well thanks to
online video.
Great product. Wish the hitch could fit under the bumper and not stick out
Great product! Installation was as expected and the instructions were detailed.
Delivered within just a few days as promised. Great customer service!
Amazing product and service !!!
Installed and fit nicely on a 2022 Audi Q3 without any part modification. Installation required rear bumper removal and took several hours. There’s a few video tutorials online demonstrating the installation. It’s worth watching the tutorials a few times before committing.
The instructions were good but it was hard taking rear end of car apart. The Hitch itself is awesome the way it works.
Hitch works great. Carries our ebikes perfectly. The only drawback was that the installation was a bit expensive on an Audi Q3, but since then, it has served us well.
Was pretty simple to assemble and the pictures in the instructions were very helpful. I really like the design as the hitch is only visible when in use. It was pretty tricky to put the bumper back on. Other than that it was smooth sailings.
extraordinary service and professionalism ... etrailer.com is a model for what web-based retailers should be like.
THANK YOU ETRAILER.COM
STAY SAFE
Dr. Ned Strauss
It looks great and disappears when I remove the connector. Haven't tried it with the bike yet.
I am so pleased with the hitch. I can’t tell that it’s there unless we are using it.
Excellent Product and is concealed very well.
Great product and customer service. Product arrived exactly when it said it would.
Awesome customer assistance
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
6/16/2022
The hitch and the Kuat bike rack look great! I do want to let you know that the hitch manufacturer prefers that you use the hardware that comes with the hitch. If it absolutely has to be replaced quickly then it will need to be at least grade 8 rated hardware.