bing tracking image
  1. Trailer Hitch
  2. Acura
  3. TL
  4. 2004
  5. Draw-Tite
FITS 2004 Acura TL
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # 24755
Retail:$259.39
Our Price: $142.59
You Save: $116.80
Trailer Hitch
Confirmed to Fit
2004 Acura TL

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 11 lbs
Quantity: 
In Stock
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" 200 lbs TW 24755
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-833-496-1390 for expert service. We are your Acura trailer hitch experts, and offer a great price. etrailer.com carries a complete line of Draw-Tite products for your Acura TL 2004. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part 24755 from Draw-Tite can be ordered online at etrailer.com. Complete trailer hitch installation instructions and technical support.
  • All Info
  • Reviews (82)
  • Q & A (0)
  • Photos
  • Why etrailer?

2004 Acura TL - Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

  • Class I
  • 1-1/4 Inch Hitch
  • 2000
  • Draw-Tite
  • No Cross Tube
  • 200
  • Custom Fit Hitch

This fully welded, corrosion-resistant Acura TL trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



24755 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

60814 Hidden Hitch Class 1 Trailer Hitch Receiver

Installation Details 24755 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
2,000 lbs.

Tongue Weight (TW):
200 lbs.


Weight Distribution Capacity
Hitch does not allow
use of weight distribution



Manufacturer Estimated Installation Time

Tech Tip

Drilling required for installation , Trunk access required for hitch installation




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24755

Average Customer Rating:  4.8 out of 5 stars   (82 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:
2004AcuraTL

It shipped quick and worked out great, for anything trailer and hitch related definitely the place I would get it.




by:

The hitch was very competitively priced and it sits underneath the car and is not real visible. Installation was about $75 but can vary some based on car. I plan to use it for a bike rack. I bought a rack from Thule but the weight of the rack rests on the bumper and put dimples in the bumper. Since I didnt go far the dimples disappeared after a couple of days. Using that rack would have permanently marked the bumper. Using a hitch is painless and allows me to open the trunk with the bike rack in place.




by:
2002 Acura RSX

Product was super easy to install. An instruction video would be helpful though. I used the 2002 Acura RSX youtube instructions to install this hitch. One side note: you don't have to discard the plastic trunk under cover, as described in the instructions. I used a dremel tool to cut 2 slots into the cover and it slides right over the hitch (as seen in the photos). This is the 2nd draw-tite hitch I have purchased and I would recommend this product to friends and family.




by:
2008 AcuraTL

This product was exactly as described and fit perfectly in my Acura TL. My only complaint is my package came without the 1/4 inch spacers required to mount the hitch. Customer service was great when I called to explain the issue but then I still had to wait another 4 business days to receive the spacers before I could complete the installation. I'm sure it was just a fluke and I was the unlucky one but it was still disappointing to open the package and discover that one of the crutial parts required for the install was missing. Once I received the missing parts and completed the install, the hitch did work great just as it should. I would definitely recommend shopping here. Great products for a great price.




by:

Easy install with easy to follow instructions. I have a kuat sherpa attached to this hitch.




by:
2005 AcuraTL

I am reviewing two things, the product and the people.

The product seems well built. Installation was straightforward and quite easy. The installation instructions call for sealing the bolt holes inside the trunk, but I decided to also seal the bolt holes on the outside. It may be overkill, buy what the heck it took a few extra minutes and I had plenty of sealant so why not?

Sales and Customer Service were outstanding. George expedited shipping for me at no charge so I got the hitch earlier than expected. Parts were missing so I called in and Katrina got me the missing parts the next day. I called late afternoon on the Friday of the Memorial Day holiday and I received the parts Saturday morning. You just can't beat that. Great job. Thank you George, Katrina and everyone at etrailer. You guys rock!


Comments
The hitch is still performing like a champ. No problems whatsoever. Thank you for your follow-up.
Tom H - 05/31/2018


by:

Arrived nice and quick! Unboxed and elected to watch their installation video on you tube rather than read the directions. Just easier. 15 minutes later I was cleaning up and my son had his bike rack on!!




by:

Easy to fit. Easy to use. However it would be useful to know that it "wobbles" and that this seems to be normal. It's a shame it's not noted in the review of the item as we've been wandering around "wobbling"
other people racks since we fitted ours as a comparison. Apparently, they all wobble but are still sturdy enough.

Etrailer were very fast and the service was good so, no complaints.


Comments
It is perfectly normal for there to be wobble or play between the shank of a bike rack and the hitch itself. The same goes for cargo carriers and ball mounts. The little bit of space makes it easier to install and remove these devices, and account for varying tolerances, but there is a bit of wiggle. There are anti-rattle devices available that are designed to reduce and in some cases eliminate this rattle. Ive added links to some examples below.
-- Etrailer Expert Patrick B - 02/19/2014


by:

The product is good but the problem is the way it is design. My acura tl trunk body cant take weight of my two bikes or even one bike without bouncing. The body was too soft. I have a 28 lbs bike with 40lbs rack.




by:

Great trailer hitch, very easy to install
Ordered
with regular shipment and received in 5 days very well packed




by:

First off, eTrailer was outstanding, from the fast shipping, great price and instructional video showing how to install it on my exact make/model. Hitch was incredibly easy to install, once I got over the fear of drilling holes in my truck that is.

I would highly recommend them, one my order I even got it several day faster than the shipping I'd paid for. Would highly recommend this compamy and this hitch


Comments
Works great and no wobbles at all. When you install and use it properly theres no wobble. I love this product.
Chris M - 04/15/2015


by:
Acura

This hitch assembly has worked great for my 06 acura tl. I have used it several times and its rock solid! It was also very easy to install. I would reccomend this to anyone!


Comments
Its been a year and the hitch is still like new and works very well. Couldnt be happier to tow my trailer while cruisin in the Ac haha
James S - 09/10/2020


by:

The receiver is well made, the directions were clear, and the installation is straight forward. The car had some factory applied sound dampening rubber on the outside of the spare tire well where it mated with the receiver. When this was removed, the steel underneath was unpainted. I used cold galvanizing spray to help protect this area and the ID of the drilled holes from corrosion.


Comments
The trailer hitch has held up well after a year. No problems.
Rick P - 03/18/2015


by:

Install was easy. I loved the entire setup of this. And I also love the low profile.




by:
2005 AcuraTL

The trailer hitch was easy to install on my Acura TL (2005). The whole process took about 1 hour and that included the wiring harness that I also ordered from eTrailer. I am very pleased with the entire process from ordering to installation. I installed the trailer hitch to tow my ATV and for general light duty use. The trailer is 6X8 and weighs about 400 lbs. The ATV weighs 700 lbs. I can tow the trailer and ATV with no problems. The car handles just fine. Again, very satisifed.




by:
Acura

bought it for my 06 Acura TL. took my only about 30 minutes to install. including getting all the tools ready. its very simple! its been a year since its been installed. still solid as a rock. i use it with a yakima 2 bike hitch. i highly recommend this trailer hitch.




by:

This was put on my 2007 Acura TL. The video was extremely well done and helpful. Installation was just fine. I just went to [retail store] to get some silicone gasket maker to seal the holes drilled into the trunk. And you need to remove the spare first because the drill holes are right where the spare tire rests.




by:
2006 AcuraTL

Installed it myself on my 2006 Acura TL. The instructions were detailed, and I did not had any issues following them. However, there is couple details that may make the installation easier for the next person:

1) when drilling the trunk pan, have either vacuum ready or something to pick up the metal shavings. It will save you from digging the splinters from your fingers.

2) installation is a one-person project, but it would be very helpful if you could have someone hold the top part of the trunk pan bolts with a pliers to prevent the spinning of the hardware when you do the final tightening.

3) the nuts for the hitch are 3/4. I found that I had to use deep-socked socket wrench, which I needed in order to use the torque wrench. I guess you could use just a regular wrench and just guess-estimate the tightness. They required decent torque on all of them to get it to 75 ft/tq as required.

4) If you want to apply silicone as a sealant on those bolts, wait until you tightened the trunk bolts. I havent, and with the hardware spinning it made quite a mess. Luckily the silicone was still fresh so it was an easy cleanup.

5) Not mentioned but I did it to prevent the rust on the bolts: I sprayed the exposed bolts from the bottom with a bedliner-in-a-can spray. Couple squirts and everything was coated and protected.

6) I re-installed the plastic pan. The instruction says that it must be discarded - not true - you just need to trim it so the hitch peg can fit.

Other than that, the installation was a breeze. Shipping was free (since it was order over $150), and then Etrailer upgraded my shipping FOR FREE (Thank you!), so I had everything shipped to my door on the 2nd day!




by:
2006 AcuraTL

It fits well and is relatively easy to install. I did it in about 90 minutes on my 06 TL including cleanup so it's not too bad. The instructions are clear and watching the demo video beforehand definitely helped.

Having another person around can be handy when tightening the two trunk bolts to keep them from spinning. Also, a good way to make sure it's going on centered before drilling the holes in the trunk pan is to find something straight (i.e. yard stick or similar) to place into the hitch opening and hang it out the back. When you step away it's easier to see if you have a slight angle since judging this from beneath the car without having it jacked up is extremely hard to visualize.

I haven't towed with it yet but I have no doubts it'll do what I need it to.




by:
2000 Honda Odyssey

Ordered two hitches.

Installation
of both hitches went well. Vehicle-specific video instructions were incredibly helpful, and the reason I shopped etrailer.com.

Weren't sure if the bolts were going to fit the Honda Odyssey, particularly because it included instructions for Ford vehicles, which take a differently threaded bolt. But the hardware seemed to match the video.

It took 45 minutes to clean out the receiving nuts on the Honda Odyssey on the frame.

The installation went as anticipated for the Acura TL (pictured).

Did not need to jack either vehicle for access, even for drilling from underneath.

Outer shipping box for larger hitch was 1/3 torn and collapsed upon receipt. UPS had taped it back together. Fortunately, hardware was wrapped to the hitch. Box for hitch pictured was moderately torn, neither hitch was not damaged.

Thanks again for the videos!




by:
2008 AcuraTL

Installed on my 2008 Acura TL. Instructional videos were very helpful. I re-installed the plastic trim piece that the videos say to throw out - I made a two-inch wide rectangular cut with a Dremel to accommodate the hitch receiver. This was done for extra rust protection/prevention. Works great with the Swagman Trailhead 2 bike rack (S63360)




by:
2006 AcuraTL

The installation of the 1 1/4" Hidden Hitch Receiver and a wiring harness on my 2006 Acura TL went smoothly. If you are comfortable with a drill and a wrench, then you can finish the job of installing both of these in an hour. I could have done a little better job aligning the hitch to be perfectly perpendicular to the bumper. A few degrees off-axis won't hurt. Will it? Doh.

I immediately went to haul two mattresses and two box-springs strapped onto my light-weight 4x6 utility trailer behind the TL, drawing some stares as I flew (40mph) down the road. As long as I drive safely and pull <500 lbs, this rig satisfies my craving for a truck and I don't have to beg and borrow from a friend just to get a sheet of plywood!!!! Boo-rah!!!




by:
2006 AcuraTL

Installation was straightforward and easy to accomplish. Took about an hour. Works will with our trailer. Also installed trailer lights from Etrailer. Again, no problems with the installation. Only reason this is not rated as excellent is we don't yet have much experience using this hitch.




by:
2007 Lexus RX 350

Delivery was fast and free when coupled with bike rack.

Was able to do in driveway, drove rear tires on 3 inch high blocks of wood and had enought room to do install.

Toughest part of install was removing plastic pan under trunch.
Had to drill out 2 inner plastic rivets.

Drill got caught up in Pan because metal was so thin (surprisingly so). Had to use dremel to smooth and round holes.

After that it was a snap...total time 45 min.

Works great, but now I have to get my trunk and bumper fixed from the damage done by old Thule trunk rack...never again.

Etrailer kept me informed during the whole order process. The videos are great help.
A pleasure to do business with




by:

This was so easy to install, I went to a local hitch place to ask about putting a hitch 0n my car, it was going to cost me twice as much and take a week to get the hitch in. I ordered the same hitch from etrailer.com and received it in 2 days and took me an hour to install myself. From now on when I need an hitch I with order it from etrailer.com and install it myself. also the wiring was easy, the hardest part about that was putting the trim back. P.S. remember to order the ball and ball mount with it so you have the matching correct size for this hitch.



25
82
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Will the Draw-Tite Hitch # 24755 fit a 2006 Acura TL with a A-Spec Lip Kit
    I did some checking and it looks like the Draw-Tite Sportframe Trailer Hitch # 24755 that you referenced will fit on a 2006 Acura TL with a factory A-Spec lip kit. I also found out that Acura does not recommend you tow at all with this vehicle and I could only safely recommend you carry a bike rack. I attached an installation video for this product for you to check out also.
    view full answer...
  • Class I Receiver Hitch for 2009 Ford Fusion
    The Draw-Tite Class I Receiver for your 2009 Ford Fusion is part # 24755. This hitch offers easy bolt-on installation. The Draw-Tite Class I Receiver, # 24865, that you mentioned is manufactured to fit the 2010 thru 2012 Ford Fusions.
    view full answer...
  • Class I Trailer Hitch Receiver will Fit a 2008 Acura TL Type S
    It looks like all the hitches we offer for a 2008 Acura TL fit all models of the vehicle. That indicates that there is no difference in the design or mounting positions on the different models. So, yes, the Draw-Tite Class I Trailer Hitch Receiver, part # 24755, will fit your 2008 Acura TL Type S.
    view full answer...
  • Where Does a Trailer Wiring Harness Install on a 2006 Acura TL
    The trailer wiring harnesses for the 2006 Acura TL, such as # 118489, plug in line with the tail lights on the vehicle. I have linked the instructions for this harness and a video showing an example installation for you.
    view full answer...
  • Will Draw-Tite # 24755 Be Strong Enough To Support a Bike Rack and 2 Bikes on a 2006 Acura TL
    Yes, as long as you do not exceed the towing and tongue weight capacity of the Draw-Tite # 24755 you will be fine. Draw-Tite tests their hitches on vehicles to ensure that they fit and are safe to use. The tongue weight capacity of the hitch is 200 lbs, which is the limit for the combined weight of the bike rack and the bikes. You will want to make sure that your bike rack is compatible with class I hitches. Also, you will be limited to carrying only 2 bikes. It would not hurt to use...
    view full answer...
  • Trailer Hitch and Wiring Harness Recommendation for a 2013 Acura TL
    Since you are concerned about voiding the warranty of your TL, I recommend checking the towing section in your owners manual if you plan on installing a trailer hitch to tow a trailer. Honda states that the Acura TL was not designed for towing and doing so could void the warranty. That is something to keep in mind before installing a trailer hitch or trailer wiring harness. If you want a wiring harness because you will be carrying a hitch mounted cargo carrier with additional lights,...
    view full answer...
  • Trailer Hitch and Compatible Bike Rack Recommendations for a 2008 Acura TL
    Installing trailer hitch, # 24755, requires about 7 steps according to the instructions (attached below). Basically, the hitch attaches to the bottom of the trunk (trunk Pan) and to the tow hook already on your 2008 Acura TL. You will need access to the trunk and there is some drilling involved to install this hitch. When using a bike rack with this hitch, you must be sure to stay within the limits of the hitch. You will need a rack that will fit in a 1-1/4 inch receiver opening, works...
    view full answer...
  • Hitch Mounted Bike Rack Recommendations for a 2012 Acura TL
    If your main concern is fitting both of your mountain bikes on a bike rack, then you may want to take a look at the Thule Doubletrack Pro XT Bike Rack, # TH92BJ. It also will fit the 1-1/4 inch trailer hitch receiver on your 2012 Acura TL. The Doubletrack is a platform-style bike rack that is popular among our customers with larger bikes. The bikes will fit into the wheel trays and are secured to the bike rack using the ratcheting arms. A hitch mounted bike rack will obstruct the view...
    view full answer...
  • Will Draw-Tite Trailer Hitch 24755 Fit a 2007 Acura TL Type S
    The Draw-Tite trailer hitch # 24755 is designed to fit all models, including the Type S, of the 2007 Acura TL. I have included a link to the installation instructions and a link to a video showing a typical installation for you. This hitch comes with a ball mount, pin, and clip. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring use # 118489. I have included links to the instructions and a video for the wiring as well.
    view full answer...
  • Trailer Hitch Mounted Cargo Carrier for Class I Trailer Hitch on a 2004 Acura TL
    All of the trailer hitches for your 2004 Acura TL are Class I hitches with 1-1/4 inch receivers. There is an adapter to go from a 1-1/4 to a 2 inch, # HTAD. However, the use of an adapter reduces the tongue weight capacity of the trailer hitch by 50 percent. So if you had hitch # 24755 it is rated for 200 pounds tongue weight. The use of the adapter reduces that down to 100 pounds. If the carrier weighs 30 pounds then you are left with just 70 pounds you could carry on your cargo carrier. A...
    view full answer...
  • Trailer Hitch and Lightweight Platform Bike Rack Recommendation for a 2004 Acura TL
    The Draw Tite hitch part # 24755 is a confirmed fit for your 2004 Acura TL and would work well to carry a bike rack. Since you like the support of the platform bike racks (I don't blame you), but like the weight of the hanging bike racks I have the perfect solution for you! Check out the Hollywood Racks Destination Bike Rack # HLY94FR.. This rack is super lightweight for a platform rack at only 20 lbs and has the great bike support that a platform bike rack provides. Another great feature...
    view full answer...
  • Will the Trailer Hitch for an Acura TL Fit Other Vehicles
    The Draw-Tite Sportframe Trailer Hitch Receiver part # 24755 will only fit an Acura TL from 2004-2008. The reason for this is because like most of our trailer hitches it is a custom fit which means it is designed specially for the Acura TL frame. There is not a trailer hitch available that will fit your Acura TL and can then be transferred to another vehicle unless it is one listed above. The bike rack I recommend for your road bike is the Kuat Transfer V2 Bike Platform Rack part # KU74FR...
    view full answer...
    Image 1 for
  • Is Draw-Tite Class I # 24755 for an Acura TL Capably of Carrying A Mountain Bike on a Bike Rack
    The Draw-Tite Class I hitch you referred to, part # 24755 has a 200 lb tongue weight capacity. This means that no more than 200 lbs can be safely suspended from the hitch, therefore the weight of your bikes and the bike rack you use can't exceed that weight limit. The Thule Camber, part # TH9058 is an excellent choice. The rack can carry two bikes up to 35 lbs each, and tilts away from the vehicle to help allow access to the rear cargo area. An available hitch pin lock is available as...
    view full answer...
  • Recommended 2-Bike Rack for 2007 Acura TL With Draw-Tite Class I Hitch
    Because the all of the hitches that are compatible with your Acura TL are Class I, like the Draw-Tite # 24755 you referenced, you would need to choose a bike rack that is compatible with a Class I receiver. Of the many choices (see link), I would recommend the Swagman Trailhead, part # S63360. The Trailhead is both lightweight and strong, and features the ability to tilt away from the vehicle. The Yakima DoubleDown Ace you mentioned is an excellent bike rack, it is unfortunately not compatible...
    view full answer...
  • Trailer Hitch and Bike Rack Recommendation for a 2005 Acura TL
    For a hitch the Draw Tite part # 24755 that you referenced would be an excellent choice as we are Draw Tite fans as well. It is a Class I hitch though so your Holdup that is for a 2 inch hitch is not going to work unfortunately. Hitch adapters end up cutting the capacity of the hitch they are used on in half so they aren't the best route either. The Swagman XTC2, part # S64670 is one of the most popular Class I compatible racks because it's so easy to use, and because the rack has an...
    view full answer...
  • Difference in Hidden Hitch # 60814 and Draw-Tite Hitch # 24755 For 2008 Acura TL
    You are correct the Hidden Hitch Class I 1-1/4 Inch Hitch, part # 60814 (no longer available), and the Draw-Tite Class I 1-1/4 Inch Hitch, part # 24755, are the same hitch produced by Cequent Performance Products. Both of the hitches will fit your 2008 Acura TL. The # 24755 Draw-Tite hitch does not include the ball mount and pin and clip. This hitch is sold to someone that might be using the hitch to carry a bike rack on the rear of their vehicle and will not need the ball mount. I am...
    view full answer...
  • Recommended Hitch and Accessories for Towing 4X8 Rental Trailer w/ 2006 Acura TL
    Although they have the same weight capacity, I'd rather see you use the Curt Class I hitch, part # 11321. Rather than bolting to the underside of the trunk pan like the Draw-Tite, the Curt hitch bolts to the underside of the rear bumper beam which in my opinion would make for a sturdier installation. The hitch has a 2000 lb towing/ 200 lb tongue weight capacity that you'll want to remain well below. You'll also need the following to complete your towing set-up: Trailer wiring harness,...
    view full answer...
  • How to Find Rise/Drop of Ball Mount Needed for Towing Small Aluminum Boat with 2007 Acura TL
    When we installed the Draw-Tite # 24755 Class I hitch on a 2007 Acura TL, we found that the inside top edge of the receiver tube sat 10-1/2 inches above the pavement. To determine which ball mount would place your trailer as close to level as possible, you'll need to put the boat trailer up on it's jack so it's level, then measure from the bottom edge of the coupler to the ground. The height difference between 10-1/2 inches and the level trailer coupler height equals the amount of rise/drop...
    view full answer...
  • Can Longbikes Eliminator G2 Recumbent Bike Fit On Thule Raceway Pro On 2007 Acura TL
    The Thule OutWay # TH45JV would not work well with your Longbikes Eliminator G2. It would be difficult mounting the bike on the arms of the carrier and the carrier has a weight capacity of 33-lbs per bike. I was unable to find the weight of your bike in my research. The design of the bike and possibly the weight would be very stressful on the back of the vehicle. I recommend installing a trailer hitch like part # 24755 on your Acura and then using a hitch-mounted bike carrier designed...
    view full answer...
  • Solution for Carrying 4 Bikes on 2004 Acura TL
    To carry bikes on your 2004 Acura TL, I'd recommend going with the Draw-Tite # 24755 hitch over the Curt # 11321 model. Curt's warranty stipulates that an extra stabilizing strap # 18050 be used with non-trailer loads on their Class I hitches, and the Draw-Tite has no such stipulation. The straps can be inconvenient to use, and some vehicles just don't have a suitable attachment point for the strap. Both the bike rack and the hitch manufacturers agree that no more than two bikes should...
    view full answer...

Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Zach D
Video by:
Zach D
Employee Nicholas E
Test Fit:
Nicholas E
Employee Brent H
Test Fit:
Brent H
Employee Jacob T
Video Edited:
Jacob T
Employee Mike H
Video Edited:
Mike H
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.