Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Designed for standard 2" hitches, this hitch lock has a covered keyhole and chrome plating to help prevent corrosion. Sturdy steel construction ensures long-lasting dependability. Can be keyed alike to match other etrailer locks.
Features:
Specs:
Note:
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (1416 Customer Reviews)
Designed for standard 2" hitches, this hitch lock has a covered keyhole and chrome plating to help prevent corrosion. Sturdy steel construction ensures long-lasting dependability. Can be keyed alike to match other etrailer locks.I chose this Trailer Hitch Receiver Lock because of its ease of use. The screw on/off function makes installation and removal easy. I also purchased a Trailer Coupler Lock from e-trailer and was able to have both locks keyed alike.
This was the recommended receiver lock for a 2" hitch. It fit the hole of the hitch on the trailer but was to large for the etrailer tire mount hitch hole, even though this was their recommended part. Also these locks are a little "wonky". The key actually turns an internal screw that screws into the lock cap. Difficult to undo and relies on the key to tighten or loosen. Sooner or later the key is going to break or bend and get stuck. I wouldn't recommend these to anyone. There are better ones out there.
Cool to follow up on your product. The multi-ball works as it should. I bought it since I didn't know if the trailer I would get would be 2" or 2 1/4. I tow a 4,000 # trailer/race car with it.
It's a heavy piece to carry around, but I feel that it will last a good many years. I did make a spacer to cram into the receiver, so the hitch doesn't rattle as much.
Otherwise it's great.
Tim E.
Should work as advertised. However, this pin does interfere with the safety cable holes in the Roadmaster Spare Tire carrier with hitch receiver. I'm hoping the safety chains are long enough to reach the hitch mounts
Great idea! Never have to worry about my bike carrier disappearing!
The product looked to have the features that fit my criteria. Use and installation was simple,and the product video was very helpful and accurate.
Yes the trailer, ball hitch and battery you installed worked great. It has served us well and you did a great job.
Most will never believe this, but i ordered this locking pin to use in conjunction with the other pin that is the exact same as this one. Except the 1st pin has been installed and in service since late 2009. I used it to hold a hitch in the receiver tube of my motorhome that coupled our hauler trailer to the motorhome. I recently decided we would start flat towing a car, instead of the hauler trailer with the expedition on it.
so i needed one more locking hitch pin to use with the tow bar rise/drop receiver adapter. When i removed the first pin, i expected it to be rusty and not unlockable. SURPRISE, a little wd 40 in the key hole to aid in key insertion and BAM she unlocked and was clean as a whistle.
it was a no brainer to order an exact duplicate for use now.
Robert
3/26/2020
still works perfect
I have several of these locking pins that were all keyed alike. I lost one and the good folks at etrailer were able to send me a matching replacement. Now I don't have to distribute multiple keys to everyone. I've used a number of locking pins in the past and this is my favorite. No tiny flange that barely grips the pin that feels like you could pull it apart with your hands. You rotate the key several times and it screws the two parts together. A much better system
It does not fit through the hole in the Kuat bike rack that I own.
The item was not long enough to go through my 2019 Toyota tundra receiver hitch. I’m having to return it after calling and getting a real nice help from Trevor to get a longer one sent to me and return this one for Credit.
My second pair for a different hitch. No rattle and no issues for over 5000 miles. Love the option of keyed alike option for less keys. Highly recommend and excellent customer service and support!
This was a recommendation as an added purchase by the company that did work. Better than others I’ve seen that lock with a barrel key (easy to break into), this one has an actual key.
Straight out of the box looks and feels great. Fits nice and snug inside the 2" Curt hitch receiver. Too early to comment on service life and durability under wet weather conditions but hope for good desired outcome.
Uoo D.
1/1/2017
No issues after a year of use and exposure to rain and frequent car wash treatments. Thanks for checking and you are welcome
Strong nice to keep spare tire mount se cure
Have bought a second pair due to the quality of it. Have used it to travel half the country without any issues. During my second pair for another hitch, I incurred an issue in getting the correct one but the customer service was there each time to resolve the problem and in a timely manner!
Great service, good selection of parts.
Too short to fit hitch even though website states it will fit 2 inch hitches.
My husband is a proud Bluewater Vietnam Navy Veteran, celebrating his 50th year anniversary of coming home. My husband is retired & I decided to get a trailer hitchcover for his old truck, to compliment his combat veteran's license plate.
While searching for a unique, eye catching hitchcover, I came across etrailer.com. The cover I chose is eye catching, unique & a sturdy heavy plastic. It was easy to install & the lock, purchased with it, will keep it in place!
He loved the cover - and the price! PS: Still young at heart!
Does what it says.
Doesn't fit 2021 Tundra 2" receiver as it's too short and locking mechanism won't engage. However it does fit our 03 Tacoma so I'll keep it.
Jenny N.
6/16/2022
For the Toyota Tacoma with has a thicker 2 inch OEM receiver, I recommend part # e98881 which has a 3.62 inch span.
Works exactly like I expected. East to install, and after one year it's still working perfectly.
I really like my trailer hitch lock. It is well made. It holds my Texas hitch cover in place. It fits perfectly.
Great product and great service. Somehow this part was not received in the initial order. etrailer sent me an email checking up on the delivery (nice service) and I let them know what happened and after a few questions, they immediately sent me a replacement.
I am very impressed with their service! I highly recommend etrailer!!
Everything worked out well. On time and fits perfect. Attach hitch setup and my new Ridgeline.
It comes with a 2" inch receiver and I have a full compliment of 1.25. stuff from my previous car. All from etrailer i must admit!
so I needed the 2-1.25 reducer, a good lock, and the 7-4 reducer for my goodies!
Thanks for the grest service
Ralph
8/23/2021
great it is used a lot
Do you have a question about this Trailer Hitch Lock?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Roger
6/3/2024
Works GREAT! Not any problems with it and dont expect any! Thanks!