Keyed alike lock set includes D-shaped anti-rattle hitch lock to secure your 2" hitch-mounted bike rack to your hitch and a 10' cable lock to secure your bike to the rack.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Steven here with etrailer.com. Today, we're taking a look together at the Benton Bike Lock Set for 2-Bike Platform Racks or even a 4-Bike Hanging Rack. Now this is gonna be ideal for the Benton 2-Bike Shifts&Grins and Grins Platform Racks, the ShiftShow Hanging Rack, or just any two-inch hitch-mounted bike rack. So you're gonna get the anti-rattle locking hitch pin. That's your standard 5/8-inch hitch pin size as far as the diameter.
The usable length in between here, whenever it's properly installed, is gonna be 2 and 5/8 inches. Now as far as locking around locking, you're gonna have, in this case, four keys that are keyed alike, and you would simply twist the key. So the key is going to double as the lock, but also if you think about it as the tool or the wrench or whatever you wanna call it. So it's gonna be threading into this piece here, and it's got like a bolt in here inside the head of the lock. So once you get this through and you tighten everything down with the lock nut to get the anti-rattle part out of there, then everything's tightened up.
Now you can put your key back on, twist everything in place, and then that would simply lock up tight, pop your dust cover over, and then your bracket is secured to the hitch and the vehicle itself. Now on the cable side here, you got a 10-foot length of cable. Same concept. Twist that key to twist the lock part off. The cable diameter is 5/16 of an inch thick.
All right, so we got that twisted off. Same concept. Now we got the cable here. You would basically put this end of the cable, more or less, through the hitch pin lock here. And then this part would go up and around all the bikes and everything and then loop back through itself, that way no one could take anything, and then same thing.
Simply twist the key to get that lock back on and lock everything down tight, take the key out, and then put your dust cover back on, and you're good to go. Well, folks, that's gonna wrap up our look together at this Benton Bike Lock Set for 2-Bike Platform or 4-Bike Hanging Racks. I'm Steven. Thanks for watching.
Although I have the 2 inch it seems to be a little lose still but seems like a good bike rack
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.