1. Trailer Hitch Ball Mount
  2. Weigh Safe
  3. Adjustable Ball Mount
  4. Fits 2 Inch Hitch
  5. Drop - 6 Inch
  6. Rise - 7 Inch
180 Hitch 2-Ball Mount w/ Stainless Steel Balls - 2" Hitch - 6" Drop, 7" Rise - 12.5K

180 Hitch 2-Ball Mount w/ Stainless Steel Balls - 2" Hitch - 6" Drop, 7" Rise - 12.5K

Item # LTB6-2
lowest price pledge
Retail:$299.00
Our Price: $249.00
You Save: $50.00
Trailer Hitch Ball Mount
This item qualifies for Free Shipping
Shipping Weight: 19 lbs
Quantity: 
In Stock
Weigh Safe Trailer Hitch Ball Mount - LTB6-2
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This rustproof aluminum, adjustable ball mount with stainless steel hitch balls lets you tow up to 8,000 lbs with the 2" ball or up to 12,500 lbs with the 2-5/16" ball. Use in drop or rise positions. Ball platform locks to shank. Lowest Prices for the best trailer hitch ball mount from Weigh Safe. 180 Hitch 2-Ball Mount w/ Stainless Steel Balls - 2" Hitch - 6" Drop, 7" Rise - 12.5K part number LTB6-2 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (586)
  • Q & A (26)
  • Photos
  • Why etrailer?

Weigh Safe Trailer Hitch Ball Mount - LTB6-2

  • Adjustable Ball Mount
  • Fits 2 Inch Hitch
  • Drop - 6 Inch
  • Rise - 7 Inch
  • 2 Inch Ball
  • 2-5/16 Inch Ball
  • Two Balls
  • Class IV
  • 12500 lbs GTW
  • Built-In Locks
  • Weigh Safe
  • Aluminum Shank - Silver
  • Stainless Steel Ball

This rustproof aluminum, adjustable ball mount with stainless steel hitch balls lets you tow up to 8,000 lbs with the 2" ball or up to 12,500 lbs with the 2-5/16" ball. Use in drop or rise positions. Ball platform locks to shank.


Features:

  • Ball mount with included hitch balls lets you hook up your trailer to your tow vehicle
    • Shank slides into hitch receiver
    • Ball provides connection point for trailer coupler
  • Adjustable height lets you tow trailers of different heights with the same vehicle
    • Slide ball mount platform up or down shank and secure in place with included dual pins
  • 2 Different-size hitch balls let you tow trailers with different coupler sizes
    • To switch ball, simply remove pins, flip ball platform, and reinsert pins
    • Stainless steel hitch balls are corrosion resistant
  • Locking dual pins secure the ball mount platform to the shank for added security
    • Plated steel lock with aluminum pins and housing resist corrosion
    • Included rubber cover protects the lock core from dust and debris
    • 2 Keys included
  • 6061 T6 billet aluminum shank and mounting platform provide superior strength and durability
    • Solid block construction provides greater strength than hollow steel competitors while also maintaining a light weight
    • Rustproof for a clean finish that stands the test of time
  • Hitch pin and clip or hitch lock sold separately
  • SAE J684 certified and VESC Regulations V-5 compliant
  • Made in the USA


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Gross towing weight:
    • 2-5/16" Diameter hitch ball: 12,500 lbs
    • 2" Diameter hitch ball: 8,000 lbs
  • Maximum tongue weight: 1,500 lbs
  • Distance from center of hitch pin hole to center of hitch ball:
    • Pin hole closest to ball: 8-1/2"
    • Pin hole farthest from ball: 9-3/4"
  • Maximum drop: 6"
  • Maximum rise: 7"
  • Incremental height adjustment: 1"
  • Limited lifetime warranty


Easily Adjusts to Fit Your Setup

Towing trailers with different coupler sizes just got easier thanks to the 180 Hitch 2-ball mount. This ball mount features a 2" and 2-5/16" hitch ball on opposite ends of the ball mount platform. Switching to the opposite ball is fast and easy - simply flip over the platform, hitch-up, and go! Because both balls are contained on the platform, you won't have to keep track of separate balls that must be completely removed and installed each time you need to switch trailers.


Adjusting and setting up the 180 Hitch 2-ball mount to work with your specific trailer is easy. To switch hitch balls, unlock and pull out the dual pins and remove the platform from the shank. Next, flip the platform 180 degrees so that either the 2" or 2-5/16" hitch ball is on top. Then replace the platform and slide it along the shank to the desired height. Insert the dual pins and use one of the included keys to lock the pins in place. A dual-sided hitch ball with a 1-7/8" and a 2" hitch ball (TB03 - sold separately) is also available.


The 180 Hitch 2-ball mount can be used in either the drop or rise position to best suit your application.


Superior Aluminum and Stainless Steel Construction

From the first moment that you lay eyes on the 180 Hitch you'll see that you're getting a superior, well-made product. The 180 Hitch's shank and ball mount platform are made entirely of 6061 T6 billet aluminum, which is the same material that is used to build aircraft components, automobile frames, and freight liners. This type of aluminum is known for having superior strength while maintaining its light weight, which makes it highly desirable over hollow steel components. 6061 T6 aluminum is also rustproof, which means the 180 Hitch will maintain its clean, shiny, and impressive appearance for years to come. And the hitch balls are made of solid stainless steel, offering far greater protection against rust and corrosion than other steel hitch balls that are only painted or plated on the surface.


The 180 Hitch meets VESC V-5 regulations and is SAE J684 certified. These regulatory bodies - the Vehicle Equipment Safety Commission and the Society for Automotive Engineers - create standards for the design, construction, and performance of automotive and towing accessories. Weigh Safe has had this ball mount thoroughly tested in simulation to ensure that it complies with these standards. The result is a strong, safe, sturdy product that is built to last.


How to Measure Drop on Adjustable Ball Mount


LTB6-2 The 180 Trailer Hitch - 2" x 2-5/16" Flip Dual Ball Combo - 6 Inch Drop - 2 Inch Hitches

Replaces Trailer Valet TB6-2






Customer Reviews

180 Hitch 2-Ball Mount w/ Stainless Steel Balls - 2" Hitch - 6" Drop, 7" Rise - 12.5K - LTB6-2

Average Customer Rating:  4.9 out of 5 stars   (585 Customer Reviews)

This rustproof aluminum, adjustable ball mount with stainless steel hitch balls lets you tow up to 8,000 lbs with the 2" ball or up to 12,500 lbs with the 2-5/16" ball. Use in drop or rise positions. Ball platform locks to shank.

- LTB6-2
by:

Sexy! I was hesitant on spending this much on a hitch, but I like a good looking rear end. That being said, the 180 with stainless balls is a beast. I’m over having to grab a different drop for my trailers and this one does not disappoint. I debated the four inch drop for my 2020 stock height Tundra but glad I went with the 6” drop. Very simple and smooth to adjust and flip for different applications. etrailer has been great to purchase from for many years!



- LTB6-2
by:

Excellent quality. I can’t believe how light it is, it’s amazing. I have not used it yet so I can’t comment how it handles stress of towing a car hauler but I am pretty impressed with the quality of the hitch.


Comments
The hitch is great! Light weight. I had my doubts because how light it is but I told my SUV on my car across the country twice.
Steven - 08/15/2020


- LTB6-2
by:

Our BSA troop will be using this hitch to pull our new trailer. This is just what we needed. The trailer can now be pulled by anyone in the troop with a 2" hitch. If we want to pull the old trailer we just flip the ball around. We camp once a month so we hope this hitch lasts as long as our new trailer.



- LTB6-2
by:

Have yet to try it but it looks to be very well engineered and constructed. I have 3 different boat trailers and 3 different SUVs that I use to tow so this adjustable receiver fits the bill nicely



- LTB6-2
by:

Customer service was excellent ! Very knowledgeable. And I got my part free shipping, And got it the next day. The ball hitch looks and fits great !


Comments
This hitch works very well ! Easy to adjust the height ! Glad I purchased this hitch.
Jerry - 06/27/2020


- LTB6-2
by:

I LOVE quality workmanship of any product and this hitch had it all! Well made, all edges radiused, fit and finish was a work of art! Been towing trailers for over 40yrs and wish I had something like this 40yrs ago. Would recommend it to family and friends!


Comments
GREAT!!!
Albert B - 02/23/2020



- LTB6-2
by:

I am very pleased with this ball mount assembly and etrailer. I got tired of the rusted mass of the old steel ball mount and ball sticking out of the back of my truck and towing out of level trailers that scrape on curbs and inclined drives. I have had to straighten out license plates and replace lights on the trailers because the rear end dragged. It will also make the trailers tow better on when they are level. This lets me tow my trailers level with a quick adjustment for each of them. It also looks much nicer. The fit and finish is very good and the versatility and ease of use is outstanding. We'll see how it stands up to Michigan winters.



- LTB6-2
by:

Hitch seems built very well and will work excellent!



- LTB6-2
by:

Product received on time and well packaged. Fit and finish is excellant,operation smooth with no binding. Instructions easy to read and understand with illustrations with online support. Quality second to none and looks good too. etrailer.com is my new truck/trailer store. NO DISAPPOINTMENTS BUY WITH CONFIDENCE.


Comments
As described when new
Steven - 01/04/2020



- LTB6-2
by:

Well made hitch


Comments
Hitch is holding up very well. Highly recommend.
Tim. L - 06/16/2021


- LTB6-2
by:

The ball that wasent being used (on bottom) the chrome flaked off making it look almost as bad as the ball on top that was doing all the work. I got chrome for looks, I understand the working ball does get chewed up but I expect the one not being used tho stay nice looking. So when my trailer is hooked up the bottom ball sticks out like a soar thumb. Since this correspondence came from you I gave a poor rating but if it came from the web I would a good rating the hitch works very well.



- LTB6-2
by:

Great hitch! I use it daily pulling trailers for work and it hasn’t let me down yet. The ball mount that slides into the receiver is a solid (not hollow) piece of aluminum and you can tell that it’s stout. I really appreciate how easy it easy to switch over with the turn of a key, the pull of the pin and also how easy it easy to adjust the ball height . I would recommend that you keep all the moving parts clean and oiled. The road dust and traile tongue dust tends to gravitate down between the slide areas of the ball mount and the adjustment hole edge, but that’s no biggy... I just simply clean it with some Aluminum Brite (NAPA SELLS IT) about once every three months or so and then spray some silicone on the areas and you’re good to go. Great product and it was fast shipping. I would highly recommend this hitch. I get asked all the time where I got it from.



- LTB6-2
by:

Excellent product. The quality of machining is very good. Looks great on my new 2019 Silverado 6.2 Z71.



- LTB6-2
by:

Hitch and Balls had great fit and finish. The adjustable height was perfect to accommodate different trailer tongues heights. We have a four wheel trailer and one axle was off the ground with the previous hitch. This hitch allows weight to be distributed equally on the two axles. Crystal was an immense help in determining the product needed as well as the appropriate locking pin. She obviously had excellent product knowledge. She is the reason I would return as a customer.



- LTB6-2
by:

I never expected a hitch to be so well made. Extremely heavy duty, molded from a solid piece of aluminum, no welds, functions smoothly and the double pin locking system is ingenious. My nephew who is a professional commercial pilot said, "I never would have imagined I would say this about a hitch, but this is a work of art". I can't agree with him more.



- LTB6-2
by:

Just received it,but just taking it out of the box I’m impressed. Very well made. It’s going to look great on my new Ram Rebel.



- LTB6-2
by:

Great hitch, I found the quality of craftsmanship excellent and the hitch itself is beefy and up for the task of pulling my tandem axle utility trailer or boat, both of which require a different size ball.



- LTB6-2
by:

Great hitch! Very well made.



- LTB6-2
by:

Great product, thinking about getting one for my other truck.


Comments
Great product, I did by one for my other truck.
Dennis M - 05/26/2020


- LTB6-2
by:

Great hitch! His boat takes the 2", my horse trailer takes the 2 5/16"... we now have these hitches on both of our trucks!



- LTB6-2
by:

Product is exactly the look I was seeking. It enhances the back of my truck.



- LTB6-2
by:

The manufacturing is quite nice.



- LTB6-2
by:

I ordered the wrong shaft size and called Megan and ordered the right one, which I love. She was so helpful and "cool" to deal with. She emailed me a return ups slip, and I sent it back. Somehow my new correct one was delivered the next day so I was able to use it for a bike rally I was going to. Very light and looks great and very sturdy.



- LTB6-2
by:

Best hitch ever used. Still works great a year later. Way better than my last billet hitch which locked up after a year.



- LTB6-2
by:

Hello, this is my first experience with etrailer and i am so impressed with both the product (a work of metal art) and their customer service. I would recommend etrailer to anyone.


26
611
Show More Reviews

Ask the Experts about this Weigh Safe Trailer Hitch Ball Mount

  • Can 180 Hitch 2-Ball Mount Be Used on 2017 Ford F-150 with 6 inch Lift
    The 180 Hitch 2-Ball Mount w/ Stainless Steel Balls - 2" Hitch # LTB6-2 would be an excellent choice for an adjustable ball mount for your Ford truck with a 6 inch lift as long as you'd only ever need up to a 6 inch drop. For an 8 inch drop you'd then want the part # LTB8-2 instead or 10 inch drop part # LTB10-2. If you are unsure how much drop you'd need check out the help article I attached that details how and where to measure to get the amount needed.
    view full answer...
  • Would 180 Hitch 2-Ball Mount w/ Stainless Steel Balls 6 inch Drop Scrape Ground
    When the 180 Hitch 2-Ball Mount w/ Stainless Steel Balls - 2 Hitch # LTB6-2 is in the drop position the shank would hang down 9 inches from the top of the hitch opening like you can see in the attached picture. For full size trucks like your 2021 Ram 1500 this is not normally an issue since there's still quite a bit of room underneath it but you can measure your hitch and know for certain. We've sold quite a few of these to owners of trucks like yours and have not had anyone report back...
    view full answer...
    Image 1 for
  • Anti Rattle Device for 180 Weigh Safe Weight Adjustable Ball Mount
    To remove the movement in the hitch between the Weigh Safe # LTB6-2 and the hitch opening you would need to use a wedge style anti-rattle like the part # RM-061. I attached a review video for this for you to check out as well. This could easily be used with a cargo carrier as well.
    view full answer...
  • What Is the Correct 180 Hitch 2-Ball Mount for a Lifted 2019 Chevrolet Silverado
    Most likely, the correct 180 Hitch 2-Ball Mount for your 2019 Chevrolet Silverado with 2" lift is going to be part # LTB6-2 for up to a 6" drop. However, there are a lot of variables to this so the first thing you need to do is measure from the ground to the top inside edge of your trailer hitch opening and then subtract the distance from the ground to the bottom of the trailer coupler while level. If you don't have a trailer yet you can use 17" as this is pretty normal for most underslung...
    view full answer...
  • Could 180 Hitch Adjustable Ball Mount In Rise Position Allow Tailgate of Ram to Fold Down
    If you measure from the top of your hitch opening up 7 inches you'd know where the top of the shank of the 180 Hitch # LTB6-6 would be at. You could lower your tailgate to see if it would interfere with that height. I attached a picure that shows this installed on a similar truck which you can see that it would allow the tailgate to fold down.
    view full answer...
    Image 1 for
  • How Much Does the 180 Hitch 2-Ball Mount w/ Stainless Steel Balls 6 Inch Drop Weigh
    The 180 Hitch 2-Ball Mount w/ Stainless Steel Balls part # LTB6-2 is made almost entirely of 6061 T6 billet aluminum so it is very light at only around 19 lbs. The single ball version of this unit, part # WS6-2 weighs around 18 lbs. The lightest aluminum ball mount we offer with 6" of drop is the Flash E Series Adjustable 2-Ball Mount w Chrome Balls part # FA42-00-2600 which only weighs around 17 lbs. The above weights are all shipping weight so you can subtract another 1 lb or so...
    view full answer...
  • Can I Get The Weigh Safe 180 Hitch 2-Ball Mount With 1-7/8 Inch And 2 Inch Hitch Balls?
    The Weigh Safe 180 Hitch 2-Ball Mount w/ Stainless Steel Balls - 2" Hitch - 6" Drop, 7" Rise - 12.5K, # LTB6-2, only comes with the 2 inch and 2-5/16 inch hitch balls. However, they do have the hitch balls available that you are asking for. The 1-7/8" and 2" Dual-Sided Hitch Ball for 180 Hitch 2-Ball Mount - 8,000 lbs, # TB03. Note that it does have a lower towing capacity rating of 8,000 lbs due to the smaller hitch ball size.
    view full answer...
  • Recommendation on an Aluminum Adjustable Ball Mount with a 2-5/16 Inch Ball
    I have a solution for you. The Weigh Safe 2 Inch Hitch, # WS6-2, is an aluminum constructed ball mount that includes interchangeable 2 and 2-5/16 inch trailer hitch balls. The ball mount has a max drop of 6 inches and a max rise of 7 inches. This Weigh Safe ball mount includes a built-in tongue weight scale and is made in the USA. For a little more economical ball mount, I like the Weigh Safe 180 Hitch, # LTB6-2. This ball mount uses a 180-degree ball head that has both a 2 inch...
    view full answer...
  • Recommended Dual Ball Trailer Hitch Ball Mount with 1-7/8 and 2 Hitch Balls
    We do have a solution for you using the Weigh Safe 180 Hitch 2-Ball Mounts like part # LTB6-2 that you referenced. There are no configurations available from Weigh Safe that have the 1-7/8"/2" hitch balls directly but you can use the part mentioned above with the 1-7/8" and 2" Dual-Sided Hitch Ball # TB03 instead to get exactly what you are looking for. Just please note that these have 7,500 lbs and 8,000 lbs weight ratings so you won't get the full 12.5K raing that you would with...
    view full answer...
  • Availability of Adjustable Ball Mount with 1-7/8 Inch and 2 Inch Hitch Ball
    I do not recommend cutting off the 2-5/16 inch ball portion from the dual ball unit included with the Weigh Safe 180 Ball Mount # LTB6-2. Modifying the ball in this manner would void the manufacturer's warranty and may negatively affect its integrity (not to mention it would be pretty difficult to do). While there isn't a two-ball mount kit available with the ball sizes you're looking for, you can use part # TB03, along with # TB01 and DB6-2 to custom make your own. This will give you...
    view full answer...
  • Can Curt Rebellion XD Shock-Absorbing Ball Mount Be Used with Lighter Trailers
    This is a really great question. I reached out to my contact at Curt and he said that while the Rebellion XD Shock-Absorbing Adjustable Ball Mount # C45949 is a really nice option for heavier tongue weights to help smooth out the ride, it's not going to provide much benefit for a lighter trailer like yours. Your boat simply isn't going to have enough tongue weight to really compress the cushioned isolator, so it's going to end up being a case of paying for something you won't actually use....
    view full answer...
  • Availability of Installation Video for Curt Trailer Hitch 13357 on a 2004 Ford F-150
    At this point in time we haven't had the chance to shoot an installation video of the Curt Trailer Hitch Receiver # 13357 on a 2004 Ford F-150 but we do have the installation instructions which I have linked to this page for you to reference as well as a picture of this installed that a customer sent in. We do have an installation video of the Curt Trailer Hitch Receiver # C13352 on a 2005 Ford F-150. This trailer hitch has the same weight ratings of the Curt trailer hitch you referenced,...
    view full answer...
    Image 1 for
  • Trailer Wiring Harness and Mounting Brackets for a 2016 Nissan Frontier
    We do have a variety of trailer connectors and mounting brackets that you can use on your 2016 Nissan Frontier. If you need a 4-Way Flat connector then the Hopkins # HM43575 will work if you have the tow package. If you don't have the tow package then I recommend the T-One # 118525. You can mount either of these using the Tow Ready # 18144 with a no-drill bracket like part # 18140. For a 7-Way without the tow package use the T-One # 118266 with the mounting bracket # PK12711U and...
    view full answer...
    Image 1 for
  • Adjustable Aluminum Ball Mount That Has Clearance to Fit Rock Tamers Mudflaps
    While the Fastway adjustable ball mount you referenced does not have the clearance needed for a Rock Tamer Mud Flap # ERT00108 we do have the very similar 180 Hitch 2-Ball Mount w/ Stainless Steel Balls # LTB6-2 which would have the needed clearance and can do the 6 inches of drop you'd need as well. I attached review videos for the ballmount and mud flap system for you to check out as well.
    view full answer...
  • Is There a Shank Only for Weigh Safe 180 Hitch With 6 Inch Drop
    Yes, you can get the shank by itself of the 180 Hitch 2-Ball Mount with Stainless Steel Balls - 2" Hitch - 6" Drop, 7" Rise # LTB6-2 or 2-1/2" Hitch # LTB6-25. The right one will simply depend on the size of your hitch receiver: - 2" Hitch Receiver: Replacement Shank for Weigh Safe or 180 Hitch 2-Ball Mounts - 2" Hitch - 6" Drop # DB6-2 - 2-1/2" Hitch Receiver: Replacement Shank for Weigh Safe or 180 Hitch 2-Ball Mounts - 2.5" Hitch - 6" Drop # DB6-25
    view full answer...
  • Comparing Curt Trailer Hitches # C15312 and # C15313 for a 2006 Chevrolet Silverado 3500
    The difference between the Curt Trailer Hitch Receivers # C15312 and # C15313 for your 2006 Chevrolet Silverado 3500 is that part # C15312 will work with vehicles that have the factory cutout bumper only while part # C15313 is designed to be used with models that have the 10" deep drop bumper. Both options have the same Class V rating with a 2" receiver opening. They have a Gross Trailer Weight (GTW) rating of 16,000 lbs and a Tongue Weight (TW) rating of 2,400 lbs. When used with a...
    view full answer...
  • Can the Weigh Safe Hitch Receiver Lock Be Ordered To Match the Weigh Safe 180 Ball Mount
    There is a chance that the Weigh Safe Hitch Receiver Lock part # WS05 will come with the same key that is used on your Weigh Safe 180 Ball Mount like part # LTB6-2 but unfortunately, we do not have any way to guarantee this though I wish we did. However, you can purchase the Locking Dual Pin Assembly and Hitch Pin Set for 180 Hitch and Weigh Safe 2-Ball Mounts part # WS06 to get matching locks for the hitch pin and adjustment pin.
    view full answer...
  • Replacement Shank Recommendation for 180 Series Adjustable Ball Mount to Gain More Drop
    The Replacement Shank for Weigh Safe or 180 Hitch 2-Ball Mounts # DB8-2 that you referenced is what you need. This will give the current 180 adjustable ball mount that your husband has 2 more inches of drop. Right now he has our part # LTB6-2 which is good for up to 6 inches of drop but if he replaces the current shank with the # DB8-2 he'll gain 2 more inches of drop (8 inches total). For even more drop we have the part # DB10-2 which would increase the drop capabilities up to 10 inches....
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch Receiver for a 2015 Ford F-150 Pulling a 5,700 lb Boat Trailer
    I have a couple of solutions for you to choose from so that you can safely tow your new boat trailer with your 2015 Ford F-150. The first thing that you can do is install another hitch that is rated for higher towing capacities. The Curt Trailer Hitch Receiver # C14016 is a Class IV hitch, which has a 10,000 lbs Gross Towing Weight (GTW) and 1,000 lbs Tongue Weight (TW). If you were to use a Weight Distribution (WD) system as well, it would bump those totals up to 12,000 lbs GTW and...
    view full answer...
  • 2-5/16 Hitch Ball for Weigh Safe 180 Hitch
    There is a 2-5/16" hitch ball with a 12,500 lb capacity available for a Weigh Safe 180 Hitch such as # LTB6-2 but the one you referenced, # WSB-XXL10, is not a fit. Instead you need the Replacement 2" and 2-5/16" Dual-Sided Hitch Ball for 180 Hitch 2-Ball Mount # TB07.
    view full answer...
  • Recommended Adjustable Ball Mount for 2 Inch Trailer Hitch Receiver
    For your 2 inch trailer hitch, there are many adjustable ball mount options. The # LTB6-2 has the dual ball mount platform and the # WS6-2 has the single ball with the integrated scale. The shank and locks on these are identical. The # AM3410 and the # AM3405 are also nearly identical with the greaseless ball being the only difference. This simply has a coating for slightly less friction noise. We don't carry the other options you mentioned so I can't really give you an accurate...
    view full answer...
  • What 180 Hitch Ball Mount do you Recommend for my 2018 Jeep Grand Cherokee
    For your 2018 Jeep Grand Cherokee I recommend using the 180 Hitch 2-Ball Mount w/ Stainless Steel Balls part # LTB6-2 it is just a little bit shorter and will allow you to haul many trailers with different coupler heights. The 8" drop is going to be just a little too long and could pose an issue with ground clearance.
    view full answer...
  • Best Way To Gain Tailgate Clearance With Electric Trailer Jack
    There are other ways to help gain tailgate clearance, but disassembling the electric jack # 3370093500 is not the solution. I would recommend getting the 180 Hitch 2-Ball Mount w/ Stainless Steel Balls For 2" Hitches # LTB6-2 because it has a 6" Drop, 7" Rise and is rated for 12.5K lbs. This will help you get your tailgate down on your 2016 Ram 1500 so you don't have to worry about denting it.
    view full answer...
  • Recommended Trailer Jack and Adjustable Ball Mount for 6000 Pound Trailer And Truck
    For your trailer jack, I recommend the Fulton Bolt-Thru Swivel Marine Jack - Bolt On - Sidewind - 12" Lift - 1,500 lbs # FXP15L. This will give you a total of 24-3/4 inches extended and will give you a jack able to handle the tongue weight of your trailer while still giving you a wheel. For towing, you want your trailer to be level, so from the sound of it you may need to get a ball mount that has a lower drop height. You may want to consider an adjustable ball mount like the B&W Tow...
    view full answer...
  • Recommended Trailer Hitch And Wiring For 2017 Dodge Durnango
    For your 2017 Dodge Durango, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver Class III - 2", # 75713, that you mentioned. I have attached an installation video for you. This is a very nice hitch. If you need a ball mount, I recommend the etrailer.com Ball Mount Kit for 2" Hitches - 7,500 lbs, # 989900. This kit will give you to different ball mounts of different heights and two hitch balls to connect your trailer. You may want an adjustable ball mount like the 180 Hitch...
    view full answer...
  • Weight Capacity of 180 Hitch 2-Ball Mount With 6-Inch Drop and 7-Inch Rise for 2-1/2 Inch Hitch
    I checked with the manufacturer, Weigh Safe, for you to confirm the weight capacity of the 180 Hitch 2-Ball Mount with Stainless Balls - 2-1/2" Hitch - 6" Drop, 7" Rise # LTB6-2. According to the manufacturer, the 2-5/16" hitch ball does have a weight capacity of 18,500 lbs, while the 2" ball has an 8,000 lb capacity. This ball mount can be secured to your 2-1/2" hitch with Pin and Clip # PC3, though I do recommend adding a lock to secure this very nice ball mount to your hitch with...
    view full answer...

Do you have a question about this Trailer Hitch Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Kathleen M
Video Edited:
Kathleen M
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Michael B
Installed by:
Michael B
Employee Shelly K
Written by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624