MaxxTow Adjustable 2-Ball Mount - 2" Hitch - 6-1/4" Drop, 7-7/8" Rise - 12K
(750 reviews)
Price: $92.91
MaxxTow Adjustable 2-Ball Mount - 2" Hitch - 6-1/4" Drop, 7-7/8" Rise - 12K
Retail:$160.37
Our Price: $92.91
You Save: 42%
Orders above $99 qualify for Free Shipping
In-stock alternatives that are ready to ship
- All Info
- Reviews (750)
- Q & A (158)
- Photos
- Why etrailer?
MaxxTow Trailer Hitch Ball Mount
- Adjustable Ball Mount
- Fits 2 Inch Hitch
- Drop - 6 Inch
- Rise - 8 Inch
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Class IV
- 12000 lbs GTW
- MaxxTow
- Steel Shank - Gloss Black
- Steel Ball
This all-steel, adjustable ball mount lets you tow up to 12,000 lbs with the convenience of a 6-1/4" drop or 7-7/8" rise. Channel-style mount includes 2" and 2-5/16" steel hitch balls. Fits 2" x 2" hitch receivers.
Features:
- Adjustable ball mount lets you tow trailers with different tongue heights
- Mount can be flipped to use in either a rise or drop position
- Keeps trailers level for safer towing
- 2-Sided ball platform has 2" diameter ball on one side and 2-5/16" diameter ball on the other
- Secures to channel with included pins and clips
- Adjusts in 1-1/4" increments
- Heavy-duty steel construction
Specs:
- Fits 2" x 2" trailer hitch receivers
- Ball diameters: 2" and 2-5/16"
- Pin hole diameter: 5/8"
- Channel width:
- Inside: 1-1/2"
- Outside: 2-1/4"
- Distance from center of hitch pin hole to center of ball: 11-1/4"
- Weight capacity:
- 8,000 lbs GTW with 2" hitch ball
- 12,000 GTW with 2-5/16" hitch ball
- Tongue weight: 1,000 lbs
- Maximum rise: 7-7/8" from the top of the inside of the receiver
- Maximum drop: 6-1/4" from the top of the inside of the receiver
- 90-Day warranty
Tow up to 12,000 lbs safely and conveniently, and get up to a 6-1/4" drop or a 7-7/8" rise with this MaxxTow ball mount system. Turn the ball mount over to select a drop or a rise. After the ball mount has been installed on your vehicle, just pull the included pins to adjust the ball platform up or down or to flip the ball platform between the 2" or 2-5/16" hitch balls as needed. Replace the pins, and you're ready to tow. The ball mount fits 2" square trailer hitches and is a great solution for those who tow several different trailers.
Keeping your trailer level with your tow vehicle makes it easier and safer to tow. If your trailer is more than 2" nose up, it may sway while being towed - increasing tire wear and making your ride less comfortable. Lots of sway makes it harder to drive your vehicle. If the trailer is more than 2" nose down, the load may put too much weight on the hitch and tow vehicle, exceeding the weight limit for both. This puts stress on the connection between your trailer and hitch and may not leave enough weight on your front wheels, affecting your ability to steer and brake properly. An adjustable ball mount system makes it easy to keep whatever you tow as level as possible.
70380 Maxx Tow MaxxWorks Channel-Style Adjustable Ball Mount w/ 2" and 2-5/16" Balls
Item # MT70380
Customer Reviews
MaxxTow Adjustable 2-Ball Mount - 2" Hitch - 6-1/4" Drop, 7-7/8" Rise - 12K - MT70380
Average Customer Rating: 4.8 out of 5 stars (750 Customer Reviews)
This all-steel, adjustable ball mount lets you tow up to 12,000 lbs with the convenience of a 6-1/4" drop or 7-7/8" rise. Channel-style mount includes 2" and 2-5/16" steel hitch balls. Fits 2" x 2" hitch receivers.
- MT70380
by: Brandon03/03/2021
Great product but will not work with a v-lock or slide lock trailer...the ones with the v shape..once it's hooked up and you turn it will bend the receiver or pins pretty bad due to distance between trailer and receiver arm Just have to ensure you use it on the rounded tongue connections on a trailer.
- MT70380
Harold K - 05/13/2021
by: Harold05/12/2020
The trailer hitch receiver, mount and ball assembly were all received in good condition and earlier than anticipated. There are multiple videos available on line for the installation so the directions were not critical for installing and this review. Every item in the package is heavy duty & of high quality and installed easily and exactly as expected. The assembly will be used to tow a 400 lb 5 x 7 trailer. I cannot comment on towing performance yet but I expect it will be very satisfactory. I am very satisfied and would use etrailer again for future purchases.
Comments
Excellent! No problems, no negative issues or concerns.
Harold K - 05/13/2021
- MT70380
Mark I - 04/03/2021
by: Mark I04/02/2020
Very strong great welds holds everything hooked to it. Two small issues. Chrome ball assembly rusts uncontrollably. Ball is located too close to upright u channel with adjustment holes. Had to grind back edge of upright to allow coupler to seat and rotate. One thousand towing miles and no signs of wear.
Comments
Ball chrome is almost totally gone even with monthly efforts to polish. May have to send it out and have it powdercoated.
Mark I - 04/03/2021
- MT70380
by: Roy05/03/2021
I bought this hitch for a 1/2 ton dodge. I tow a boat and a couple flat bed trailers. Adjustable yes, fast and easy to adjust, marked for different heights for the trailers. Really is a good hitch, pretty cheap for what you get. Is built more than strong enough. Easy to install. I build alot of stuff in my shop. welders, torch, bad saws, cutters, quit alot of stuff. Darn good hitch. I'm glad I bought it. Serves me well.
- MT70380
Rich H - 02/24/2018
by: Rich H.02/24/2017
Very satisfied. Product finish has held up well. Used to tow 8000 lb. boat and trailer 2800 miles round trip Price was good as well. Was very easy to make adjustments for use on other trailers. No complaints about this purchase.
Comments
Am generally happy with it but still think it it is rusting more than it should. I would suggest that if a person buys this it should pay be stored inside vehicle during days of non use.
Rich H - 02/24/2018
- MT70380
Michael - 01/15/2019
by: Michael01/15/2018
Product seems heavy duty. Haven’t towed enclosed trailer as of yet. Price was very affordable for adjustable ball mount.
Comments
Recently bought new super duty need 2.5 receiver ball mount. Gotta check amount needed.
Michael - 01/15/2019
- MT70380
by: Jerry06/03/2021
Used the hitch drop formula: truck hitch receptacle height minus the level trailer tongue height and it resulted in the trailer front being 1.5 inches too low. This adjustable ball mount allowed me to make an easy adjustment to correct the formula error. Didn't have to return the ball mount to adjust for the error like those that aren't adjustable. The price was much better than the competition for a 12k pound hitch.
- MT70380
by: Jonathan05/03/2019
This adjustable trailer hitch is solid and heavy duty. I haven't used it yet on a trailer, but it does appear to have a little slop in the reversible ball. The cotter pins seem way too long for this hitch, but are of good quality. I would definitely recommend this to others.
- MT70380
Steve E - 07/12/2021
by: Steve E07/11/2020
Excellent!! Item is reliable and stable. Cross country towing trailers with vehicles.
Comments
Product is still holding strong. Great investment!!
Steve E - 07/12/2021
- MT70380
by: Robert P.05/13/2019
Heavy duty, very nice. Pulled a 2500 Diesel in a 24' cargo trailer 700+ miles without any problems. Other products similar to this I've used in the past had what felt like alot of play between the ball and pins but this product had very little to no play which made for a smooth less tense haul.
- MT70380
by: Bradley B.01/05/2017
The hitch has worked flawlessly pulling our 9000 lb camper. The adjustable height feature allows me to quickly Convert over to tow my 18' dovetail trailer and backhoe to a jobsite. Excellent products, best prices and customer service was excellent as well. A+ From me. I will be back when I need something.
- MT70380
by: Michael07/30/2021
Set up a whole towing package for my truck and used e trailer for the whole thing, quality and quickness and they got it done...Thank you etrailer!!
- MT70380
by: Matt06/11/2018
This hitch is solid - I drive a Chevy 1500 and tow a 26ft boat with this. The boat has alot of forward weight and my truck rode to low in the back for my liking. That is no longer an issue with this hitch. It is built well and I can see myself using this for a long time to come.
- MT70380
by: Chris j03/19/2017
I've been doing with this hitch for a year, works great and does exactly what it's supposed to for less than half of the price of the competitors. I would definitely recommend this hitch.
- MT70380
by: Randal09/10/2021
Great looking adjustable 2-ball mount!!!
- MT70380
David - 04/08/2020
by: David04/15/2019
Pulls straight down the road. Hangs a little low for my truck (stock height 3500 dually) but allows my to match trailer height with any of my trailers, and is rated quite high for towing. Heavy and solid. The wobble shown in the video exists in mine, but I dont hear it rattle when on the road, so it doesnt bother me. Easy to change positions. The only draw back I have had was when reversing over a curb it drops low enough to gouge the ground and fills the channel with dirt. Should not be a problem on a lifted truck though, and is not a problem as long as I stay on the road.
Comments
Its been great for my Chevy 3500 van and my Yukon XL as well. No problems with either, on cross country tows, up to 10k, put at least 3k-4k miles on it, no issues so far.
David - 04/08/2020
- MT70380
John - 09/06/2020
by: John08/25/2019
My first ball mount purchase, ever. Knew I wanted high-capacity, an affordable price, and -since I would be towing with differing loads in both tow vehicle (a van) and trailer- I required an adjustable height range. This MaxxTow ball mount met all three of these needs. I have since received my purchase from etrailer.com (in good time!) and found the item to be as described and pictured. NOTE: some customer comments have mentioned loose tolerances on these ball mounts. I understand that possibility, though the product I received has only slight slack in all of the areas including the receiver/shaft fit, the fore/aft play amongst the adjusting pins, and the side-to-side movement between the balls and mounting rack it sits between. It may be that these tolerances have improved due to manufacturing tweaks; it may be that my being a novice tower leaves me more easily pleased. I'll simply end with this: since I've only used this item once thusfar (for 5,500 lbs. over 20 miles), so long as the steel and welds hold up (as they appear that they would), this product seems a fine thing to have for many uses. I am glad that I found and bought it -especially through etrailer.com. Thanks, guys.
Comments
I have since used this product coupled to my Draw-Tite Ultra Frame 10K cap.1.5k tongue to pull my Car-Hauler-to-Toy-Hauler Camper conversion 650 miles. With my little car within, it was a full 10,000 lb. package. Worked as it should. Nice and level tow. No issues found.
John - 09/06/2020
- MT70380
by: John M05/26/2017
You guys are tops! This is exactly what I need. Order came in 3 days. I will be back for sure. I took a picture of the ball mount on the back of my F-150. It is to haul about 4 tons and I do not have to screw around with different mounts with different rises/drops. I am ready to roll. Thank you.
- MT70380
by: Marv04/21/2021
Good hitch for the price. Very convenient to adjust the ball height to the trailer. The only negative is that the chrome is peeling off the ball.
- MT70380
by: Shawn H08/03/2016
I love the hitch! Really like the strength and durability at such a low cost. Very strong design! Great for anyone who needs a drop hitch. I would recommend buying this for ant
- MT70380
Ronald M - 08/21/2016
by: Ron M08/22/2015
MaxxTow Adjustable 2 ball mt hitch. First, let me say that the ball hit and the hitch locks were delayed in shipping due to production delays. I want to thank Pat C. in customer service for providing me a running account of when the product was made and shipped right up to delivery of the hitch. Thank you Pat. Now for the hitch, the pricing of the hitch is very fair. Compared to comparable hitches, I saved at least 50$ on the hitch with no apparent downgrade in the equipment. So I got the hitch well-packaged. Everything was included that i had ordered. Next was the product to truck install. That went easy. Fit and finish was good for a Chinese made product and they certainly didn't skimp on the steel. The ball mount looks classy and it looks like it will be rugged and dependable. I guess we won't know until it is put to the test. That will be happening soon. I expect it will perform as other reviewers had indicated.
Comments
Follow-up review. Still An EXCELLENT product. No apparent problems and the hitch still looks good. Thanks.
Ronald M - 08/21/2016
- MT70380
by: Roger11/30/2020
I know it was cheap, but chrome came off ball after light use with light duty trailer. 2-5/16 side does not allow for use with some trailer trailer tongues because of lack of clearance
- MT70380
Geno - 03/27/2018
by: Geno03/27/2017
Have used this for a year. Works well in my situation. If you have a high trailer mount this is the ticket to get it down to a more level plane, or if you have multiple types of trailers, this should accommodate most of them, if not all. Should also work well for low trailer hook ups as all you have to do is turn it over. Strong and sturdy enough to survive the harshest treatment.
Comments
Its solid steel. Only thing that could possibly happen to it is Superman bending it up, which of course has not happened.
Geno - 03/27/2018
- MT70380
by: Robert11/05/2018
Great all around hitch. I bought this hitch for occasional use and so I wouldn’t have to worry about having the right size ball for the job at hand. Since then I’ve used it for the last year in everything from small equipment hauling, to 20” campers, to loaded up car haulers (flatbed). I’ve put about 3k miles of hailing on the hitch so far and even with leaving it on my truck about 6 months out of the year and not being great about the occasional oiled wipe down, I have minimal surface rust and it still looks great. It still gets 5 stars because it’s by far the best hitch you can get for the money. The only improvement I would make is to fine-tune the size of the ball/hitch pin-hole. There is just enough of a size difference between the pins and the holes they slide in to that there is some play in the actual ball. Other than that it’s a fantastic hitch.
- MT70380
Milton - 10/07/2019
by: Milton10/06/2018
Product shipped and delivered within 2 days of my order. Really good value compared to the pricier hitches out there. Pins are a little long, but that’s an easy gripe to overcome. It’s definitely a heavy duty hitch with good strong welds. Easily handled my 10k cargo trailer.
Comments
Still using it and it hasn’t failed at all! Great product and will definitely be one of the last hitches I ever buy.
Milton - 10/07/201927
763
Show More Reviews
Ask the Experts about this MaxxTow Trailer Hitch Ball Mount
- How To Tow A Trailer Without Measuring for Rise/DropThe only true way to determine what ball mount you need is to measure from the ground to the top inside edge of the receiver tube on the vehicle and then subtract the difference from the ground to the bottom of the coupler on the trailer while level. However, if you do not have access to the trailer then the best option for you is an adjustable ball mount as this will not only more than likely allow you to tow your boat trailer level without measuring beforehand but will also accommodate...
view full answer... - Why Do Adjustable Ball Mounts Have Slight Play Between Ball Platform and Shank PartsThe 2-sided hitch ball part of the MaxxTow Adjustable 2-Ball Mount # MT70380 connects to the shank portion with a set of two pins and clips. These pins are sized to easily fit the holes in the shank. In other words they are intentionally just a little smaller in diameter than the holes in the shank to ensure you do not have any problems adjusting its height. The small amount of "slack" or "play" between these two parts does not affect stability, safety or capacity for this item and truly...
view full answer... - Pin Hole to Weld Dimension on Curt Adjustable Ballmount # C45900I was able to go out to the warehouse and measure the Curt Channel Adjustable Ballmount # C45900 for you and found that the distance from the center of the furthest hitch pin hole to the welded part of the bar is 3-3/4 inches. The distance from the closer center of the hitch pin hole to that same weld spot is 2-3/4 inches. I also measured from the center of the hitch pin holes to the back of the adjustable bracket in case you meant that measurement. This was 6-3/4 and 5-3/4 inches....
view full answer...![Image 1 for]()
- Ground Clearance for MaxxTow Adjustable Ball MountThe distance you are looking for is 6-1/8 inches on the MaxxTow Ball Mount part # MT70380. I added that dimension to the picture you submitted.
view full answer...![Image 1 for]()
- Adjustable Ball Mount Recommendation that Can Do Zero to Three Inches of RiseThe MaxxTow Adjustable ball mount part # MT70380 would be a great option for you. It can do a rise from 0 to 7-7/8 inches, has a 12k capacity, and has a 2 inch and 2-5/16 inch hitch ball to cover most of the coupler sizes you'd run into. I attached a review video for more info for you to check out as well.
view full answer... - How to Choose Correct Fixed or Adjustable Ball MountFinding the right ball mount, one with the correct rise or drop, will allow your hitched trailer to be level which is important for best handling. We offer both fixed and adjustable ball mounts for 2-inch hitches that are shown on the linked page. If you tow only one trailer and only with one vehicle then you may not need the benefit of flexibility from an adjustable ball mount like the MaxxTow # MT70380. If you have more than one trailer or tow vehicle then an adjustable ball mount...
view full answer... - How Much Ground Clearance Is Needed With the MaxxTow Adjustable 2-Ball MountWhen choosing a ball mount, you will want to select one that has the correct amount of rise/drop needed for you to tow your trailer level. If you choose one that has more drop than what you need then you run the risk of the ball mount making contact with the ground over bumps and dips in the road. I don't have any sort of minimum clearance measurement between the bottom of the ball mount and ground but the 10" you have seems pretty low. Therefore, if you are not using the MaxxTow Adjustable...
view full answer... - Determining Correct Ball Mount or Draw Bar for your Vehicle and Trailer Combination for Level TowingTo find the correct ball mount you want to measure from the inside top opening of the receiver on your truck to the ground. Then you want to measure the trailer from the bottom of the coupler to the ground when the trailer is level. The difference between those two measurements will give you the proper rise or drop for your application. I've attached an article to assist. If you don't want to use a fixed mount, or if you pull different trailers, you may want to consider an adjustable...
view full answer... - How to Select Correct Ball Mount to Tow Travel Trailer with Lifted Truck with 35-Inch TiresTowing a travel trailer with a truck that has both a 6-inch lift and large 35-inch tires will almost surely require a ball mount with a very substantial amount of drop to allow your trailer to be level when it is hitched. Out-of-level trailers do not handle as well as ones that are level so you will definitely have a better towing experience by selecting the correct ball mount. I linked for you an article that explains the simple measurement process for determining the correct rise (or...
view full answer... - Ball Mount for 2 inch Hitch with 5 inches of Drop with at Least 7,500 lbs Capacity5 inches of drop for a Class III ball mount is hard to find exactly unless you want to use a adjustable ball mount like part # MT70380 which comes with both a 2 inch ball and a 2-5/16 inch ball. This ball mount has more than 7,500 lb capacity when used with either ball size.
view full answer... - How to Choose Adjustable Ball Mount with Correct Drop to Tow Trailer LevelIt sounds like you might be looking for a new adjustable ball mount to tow your trailer level. The best method for determining the type of drop you need with your new vehicle will be take a couple of measurements on your vehicle and trailer. Starting with your vehicle on level ground, you will want to take a measurement from the ground to the top of the hitch receiver. Then with your trailer on level ground, measure from the ground to the bottom of the coupler. If the hitch height on...
view full answer... - Pin Hole to Angled Bracket of MaxxTow Adjustable 2-Ball Mount # MT70380 The dimension you are looking for on the MaxxTow Adjustable 2-Ball Mount # MT70380 is 3-3/8 inches. That is the distance from the center of the hitch pin hole to the beginning of the angled support bracket.
view full answer...![Image 1 for]()
- Adjustable Ball Mount with 1-7/8 Inch and 2 Inch BallsWe do have a similar item that has all 3 common ball sizes; 1-7/8, 2, and 2-5/16. Take a look at the Curt adjustable tri-ball ball mount, # D900. I have included a link to a video review for you. MaxxTow has a similar product, # MT70197. I have linked a video for it as well. Either of these are going to be the closest in design and price as # MT70380 you mentioned.
view full answer... - Will there be a lot of Rattle with the MaxxTow Adjustable 2-Ball Mount Since there are 2 places of movement (at the hitch and where the ball attaches) on ball mount # MT70380 it can have more rattle than more fixed ball mounts when not towing. When under load there would be less rattle due to the weight of the trailer pushing down on the ball. There isn't a good way to eliminate rattle where the balls attach to the shank. Cushioned adjustable ball mount # CAB-UM would have less rattle since it is cushioned both vertically and horizontally but it is rated...
view full answer... - How to Choose the Correct Ball Mount for a 2018 Jeep Grand Cherokee LimitedIn order to choose the correct ball mount for your 2018 Jeep Grand Cherokee Limited and 19’ Airstream Flying Cloud, you will need to do a bit of measuring. For this, you will need to measure from the ground to the top of the inside edge on your receiver tube opening and from the ground to the bottom of the coupler on your trailer while level. The difference between the above two measurements will give you the correct amount of rise/drop you will need to look for in a ball mount. I have...
view full answer... - How Much Ground Clearance is Lost When MaxxTow Adjustable 2-Ball Mount MT70380 is in Drop PositionIf you measured from the bottom of your hitch opening down 7-7/8 inches you'd know where the bottom ball of the MaxxTow Ball Mount part # MT70380 would be relative to the ground. This should allow you to know what kind of ground clearance you'd have.
view full answer... - What Hitch Ball Size is Needed to Tow a Hi-Lo Towrite 22T TrailerThe hitch ball size of your Hi-Low Towrite 22T depends on the model year. In the 90's it appears they used to use 2 inch hitch balls and then moved to 2-5/16 inches. All of the models from that point have a 2-5/16 inch hitch ball. If you want to be sure you have the correct hitch ball on hand, I recommend the MaxxTow Adjustable 2-Ball Mount - 2" Hitch - 6-1/4" Drop, 7-7/8" Rise - 12K # MT70380 which has both hitch ball sizes and will give you adjustability to tow level.
view full answer... - Does MaxxTow Make An Adjustable 2-Ball Mount With 2 Inch and 1-7/8 Inch Hitch Ball?MaxxTow only makes their Adjustable 2-Ball Mount - 2" Hitch - 6-1/4" Drop, 7-7/8" Rise - 12K, # MT70380, with the 2 inch and 2-5/16 inch ball sizes. They do however have a three ball hitch, the MaxxTow Adjustable Tri-Ball Mount for 2" Hitches - 5-3/4" Drop/Rise - Solid Shank, # MT70197. If you are looking for a similar design with the 2 ball hitch with the 1-7/8 inch ball and 2 inch ball, I recommend the EZ Adjustable Ball Mount with Combo Ball - 8" Drop or Rise - 8,000 lbs, # AM3297. I've...
view full answer... - Pin Hole to Angled Gusset Dimension for MaxxTow Adjustable Ball Mount MT70380The dimension you are looking for on the MaxxTow Adjustable 2-Ball Mount # MT70380 is 3-3/8 inches. That is the distance from the center of the hitch pin hole to the beginning of the angled support bracket. The total weight of this is 31 lbs. The rise of the # C45900 is 5 inches. But if you were to measure from the top of the 2 inch ball it would be right at 7 inches instead. The part # C45900 weighs a total of 31 lbs as well.
view full answer...![Image 1 for]()
- How to Determine Drop Needed on Ball Mount for Lifted 2013 Ford F-350It sounds like you are needing a ball mount with a drop so you can tow your trailer level with the lifted 2013 Ford F-350. In order to determine the exact drop you need, you just need to take a couple quick measurements on your trailer and truck. Starting with the truck parked on level ground, take a measurement from the ground to the top of the trailer hitch receiver. Then, with the trailer also on level ground, measure from the ground to the bottom of the coupler. If the measurement...
view full answer... - What is the Maximum Towing Capacity of a 2016 Chevrolet Traverse AWD with Tow PackageIn order to determine the maximum gross trailer weight (GTW) that you can haul with your 2016 Chevrolet Traverse, you will need to find both the gross combined weight rating (GCWR) and the gross vehicle weight (GVW). If you subtract the GVW from the GCWR that will give you the maximum GTW you can safely tow. These figures can be found on the white tag inside your driver's door jamb. According to the owners manaul for your 2016 Chevrolet Traverse. If you have the All Wheel Drive (AWD)...
view full answer... - Trailer Weight Capacity and Ball Mount for 2014 Jeep WranglerYour 2014 Jeep Wrangler is not rated for towing a trailer that is as big as your hitch is rated for. Your hitch is rated for 7,500 lbs, but your vehicle is likely rated for 3,500 lbs or even less at 2,000 lbs depending on your engine, axle ratio, and transmission combination. The descriptions are listed in the owner's manual. Many hitches are independently tested and are rated for capacities that exceed the vehicle manufacturers capacities for the vehicle. If you don't yet have a ball...
view full answer... - Availability of Adjustable Ball Mount w/ 1-7/8 and 2 Inch Trailer BallsMaxxTow doesn't offer an adjustable ball mount like the # MT70380 that uses a 1-7/8 and a 2 inch ball, but Buyers Products offers the # 3371802225 which offers a 1-7/8, 2 and a 2-5/16 inch trailer ball. With the 1-7/8 ball in use, the adjustable ball mount has a 6000 lb capacity, or an 7500 lb capacity with the 2 inch ball and a 10000 lb capacity with the 2-5/16 inch ball. The adjustable ball mount offers up to a 6 inch rise or drop. If you click the provided link, you can see a product...
view full answer... - Adjustable Ball Mount with Two Ball Sizes for 2014 Lexus GX460For the 2 inch hitch you have installed on your 2014 Lexus GX460 the MaxxTow adjustable ball mount part # MT70380 that you referenced would be a great solution. It's adjustable in height and has the two ball sizes you are wanting as well. I attached a review video for more info as well.
view full answer... - Best Way to Determine Coupler Height on Trailer That is About to be PurchasedBest option would be to contact the dealer selling the trailer and ask them to get that figure for you. They should be more than willing to take the measurement as it will allow you to buy it from them and drive it home. A longer shot might be to find a Forest River RV forum and ask around in there. Your truck sits up pretty high so an adjustable ball mount with a decent amount of drop like the Rapid Hitch part # AM3296 would most likely do the trick. It can do a drop of up to 8 inches...
view full answer...![Image 1 for]()
- Is there a Lot of Movement, Play, Slop when Using MaxxTow Adjustable Ball Mount MT70380The slight movement of the ball portion of adjustable ball mount # MT70380 would not be nearly enough to take the trailer off level while towing. It will though most likely make more noise than a standard ball mount since it is a 2-piece ball mount. There is going to be some movement to varying degrees from all adjustable ball mounts. You could go with a higher quality ball mount such as the B&W Tow & Stow # BWTS10040B but the difference in movement probably won't be nearly enough to...
view full answer... - What is the Pin Size for the Ball Part of MaxxTow Adjustable 2-Ball Mount # MT70380Yes, the pins that hold the ball part of the MaxxTow Adjustable 2-Ball Mount # MT70380 are 5/8" diameter pins. You can put a lock on in place of a regular pin but you would only need 1. If you get 2 you can get some that are keyed alike such as # e98881 and have one for the ball portion and one can be used as a hitch lock.
view full answer... - Recommended Ball Mount with Drop for 2 Inch Trailer Hitch ReceiverWe do not currently have any hitch adapters available that will expand the 2 inch receiver on your truck to a 2-1/2 inch receiver for use with your existing ball mount. Your best option might be to simply replace your ball mount with one that is compatible with 2 inch trailer hitch receivers. I have attached a link that will take you to our available selection of ball mounts, as well as an article that explains how to choose the best one for towing your trailer level. I recommend looking...
view full answer... - Adjustable Ball Mount with 1-7/8 and 2 Inch BallsWe do have some adjustable ball mounts that feature a 1-7/8 inch and 2 inch ball. We have EZ Hitch # AM3295. For more rise or drop we have # AM3297. We also have some with 3 balls (1-7/8, 2, and 2-5/16 inch) including # D900 and # MT70197. I have included some links to videos for you.
view full answer... - Could the MaxxTow Adjustable 2-Ball Mount MT70380 be Used to Reduce SwayIf your trailer isn't setting level the part # MT70380 can help reduce the sway by allowing you to select the correct height that will allow the trailer to sit level. You cannot use a sway control tab with this though. That being said the best way to prevent trailer sway is proper trailer loading. You need to ensure you have between 10 and 15 percent of the total trailer weight as tongue weight to prevent sway.
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality trailer hitch ball mount for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer hitch ball mount information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Edited by:
Lindsey S
Written by:
Tammy D
Test Fit:
Randy B
Video Edited:
Chris R
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-1624
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.