1. Trailer Hitch Ball Mount
  2. MaxxTow
  3. Fits 2 Inch Hitch
  4. Adjustable Ball Mount
  5. Drop - 10 Inch
  6. Rise - 8 Inch
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 10" Drop, 8" Rise - 5,000 lbs

MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 10" Drop, 8" Rise - 5,000 lbs

Item # MT70067
lowest price pledge
Retail:$79.73
Our Price: $31.85
You Save: 60%
Trailer Hitch Ball Mount
Orders above $99 qualify for Free Shipping
Shipping Weight: 15 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Adjustable ball mount fits 2" trailer hitch receivers and provides up to a 10" drop or 8" rise to fit your application. Channel-style mount offers different height positions. Constructed of sturdy, black powder coated steel. Lowest Prices for the best trailer hitch ball mount from MaxxTow. MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 10" Drop, 8" Rise - 5,000 lbs part number MT70067 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (765)
  • Q & A (115)
  • Photos
  • Why etrailer?

MaxxTow Trailer Hitch Ball Mount - MT70067

  • Fits 2 Inch Hitch
  • Adjustable Ball Mount
  • Drop - 10 Inch
  • Rise - 8 Inch
  • No Ball
  • Class III
  • 5000 lbs GTW
  • Long Shank
  • MaxxTow
  • Steel Shank - Gloss Black
  • 1 Inch Ball Hole Diameter

Adjustable ball mount fits 2" trailer hitch receivers and provides up to a 10" drop or 8" rise to fit your application. Channel-style mount offers different height positions. Constructed of sturdy, black powder coated steel.


Features:

  • Adjustable ball mount offers different positions to match the height of your application
    • Tow trailers of varying heights with the same vehicle
  • Channel-style mounting system is easy to adjust
    • Move ball mount up or down along channel
    • Secure ball mount in place with included pins and clips
  • Sturdy steel construction
  • Corrosion-resistant black powder coat finish
  • Hitch pin and clip or hitch lock sold separately


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Gross towing weight: 5,000 lbs
  • Tongue weight: 500 lbs
  • Drop (from inside of hitch opening to top of ball platform: 10"
    • Maximum: 10"
    • Minimum: 5"
  • Rise (from top of inside of hitch opening to top of ball platform): 8"
    • Maximum: 8"
    • Minimum: 4"
  • Distance between vertical adjustment holes: 1-1/2"
  • Distance from center of hitch pin hole to center of ball hole: 12-1/4"
  • Distance from center of hitch pin hole to closest edge of gusset: 3-1/8"
  • Ball hole diameter: 1"
  • Shank length: 10-3/4"
  • 90-Day warranty


How to Measure Drop on Adjustable Ball Mount


70067 Maxx Tow Adjustable Ball Mount






Customer Reviews

MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 10" Drop, 8" Rise - 5,000 lbs - MT70067

Average Customer Rating:  4.8 out of 5 stars   (765 Customer Reviews)

Adjustable ball mount fits 2" trailer hitch receivers and provides up to a 10" drop or 8" rise to fit your application. Channel-style mount offers different height positions. Constructed of sturdy, black powder coated steel.

- MT70067
by:

Product arrived Early, Exactly as ordered and. The product: MaxxTow. Adjustable Height Ball Mount is just as presented. Good quality welds,paint including all items mentioned. I will continue to recommend to all my friends. REtailer is the place to go


Comments
Ive used the product since the day I got it. I have since purchased a different item. From eTrailer.com As before, the product arrived on time and at a fair price...
Rick F - 08/28/2021


- MT70067
by:

I really like the adaptability of this trailer hitch. I tow multiple height trailers from two different height vehicles and needed something that wouldn't cause me to have to carry several different height hitches. It was slightly lose when I first received it so I ran a couple thin beads of weld on a few spots then ground them down until they fit really snug and now it is extremely solid and I recommend having someone do this if you do buy this hitch. Prior to that it was loud. Its been very durable. Occasional use with a small utility trailer with no more than 1k Lbs total weight but I use it to mostly tow a boat once or twice a week in the summer for about a 30 minute drive each way. The boat/trailer/gear is approximately 3600 lbs with a tongue weight around 200 and I have rarely towed anything much heavier with this receiver and it seems to be holding up well.


Comments
I liked this hitch a lot, it worked great for what I needed pulling multiple trailers and not having to carry various hitches. I have however since upgraded to a full size pickup and I will be ordering one with a higher weight capability
S C - 05/21/2021


- MT70067
by:

An inexpensive and quality option to give my side by side trailer a level ride behind my 2020 Chevrolet Suburban. I needed something with a 9-10inch drop and this fit the bill inexpensively.



- MT70067
by:

I needed this for my 2016 Kia Sorento, as the hitch is set pretty low to the ground. The product arrived very quickly and is in perfect condition (no gouges in the paint or other issues). Very satisfied with etrailer as always.


Comments
Thanks for checking in.. its still working just fine.
Jim - 04/25/2018



- MT70067
by:

I was very pleased to have found this product at etrailer. I couldn't find one that had this much versatility in my home town. I have a Ram 4x4 truck that sits higher up than a normal truck, and this is exactly what I was looking for. I needed more drop and this one is perfect for my needs. Also, thanks to etrailer for expediting the shipping at no extra cost to me. I now will be able to use this hitch for a variety of trailers without having to switch receivers constantly! Well made and less expensive than ordering from hometown stores.



- MT70067
by:

I bought this unit to pick up a trailer halfway across the country about which I had no hitch height data. Solid and strong, once I got everything set, I replaced the pins with 5/8 nuts and bolts to take out any slack in the system. Works fine.



- MT70067
by:

Haven't used it yet but assembled as it looks. Because if the way the adjustment works I have a feeling it will not be quiet when driving slowly...


Comments
Great. Not crazy about the slop when starting and stopping but it is working as designed.
John L - 08/19/2021


- MT70067
by:

Etrailer website works great! They contact you within minutes to get the product on its way. Customer service is top notch as well. Had my ball mount within three days of placing the order! Excellent quality, just what I needed to tow with my Jeep with 3.5 lift. Will recommend to friends . Thank you



- MT70067
by:

There's a lot of choice for adjustable ball mounts and I bought this one based on price versus the low weight loads I intend to use it on. First impressions are that it's a well made, easy to use, sturdy product. It's only been fitted for 24hrs so I'll report back once it's been used to tow something.



- MT70067
by:

Worked out great and as always etrailer makes it happen!



- MT70067
by:

Many compliments on this mount. Perfect if you haul several different trailers.



- MT70067
by:

Seems sturdy enough to haul my utility trailer. Will know for sure as time goes on.



- MT70067
by:

Good product used on Subaru ascent pulling an atv Subaru sits high so needed something to lower it!



- MT70067
by:

I like the ability to have just one hitch for both of my trailers which are different heights. Product is great and service was prompt . I definitely recommend this hitch.


Comments
Great. I would buy another if this one went missing. I have a boat and a utility trailer so this works great for both heights. A quick adjustment is all that I need to do.
Jimmy R - 07/14/2020


- MT70067
by:

Adequate for my purpose. One of the pin holes wasn’t fully punched out and had to drive it out with a punch.



- MT70067
by:

I use this adjustable hitch for both my 2008 4 runner,as well as my 1995 chevrolet G20 van and its perfect!



- MT70067
by:

I am very pleased. The guides arrived very quickly -like two days -and were easy to install. I have ordered everything for my used trailer including spare tire, trailer hitch receiver and the ball mount. The ball mount gave me an 8in rise which is what I needed for my Toyota Tacoma. Etrailer follows up and does a great job.



- MT70067
by:

This hitch is is very rugged and has a very wide range of vertical adjustment. Just what I needed.



- MT70067
by:

it's solid, seems well built, and works for what i need it to do


Comments
This thing is heavy, but it has held up great. I have started using the tow-ready J-pin as an anti rattle for it, it clanks around a lot where the ball mount attaches with the two pins. But it has held up great and still works for what I need it to do. I would buy it again.
Richard - 08/08/2021


- MT70067
by:

Exactly what I needed and exactly as described. Shipping faster than expected. Been using etrailer for 5 years and have never been disappointed.



- MT70067
by:

I ordered this to tow a vintage pop up that I had just purchased. The hitch was great because the pop up tongue and the receiver were different heights. Well fast forward a few months and my tow vehicle was totaled and get a different car. Since this is so adjustable it worked perfectly for my new tow vehicle! It is very durable and the pins stay in no matter how bumpy the road.


Comments
I am still very pleased with the hitch that I bought!
Joy - 07/26/2017



- MT70067
by:

I would have given a 5 star rating for quality and solid feel, but was disappointed with the amount of spacing on sides of the adjustable ball mount once mounted on the hitch assembly with pins which causes a significant amount of rattle during towing...too much play so an anti-rattle device will be needed which is another expense on top of the ball purchase needed as well!



- MT70067
by:

Well i got it on time. But, the hitch mount didn't come with pin. To attach to trailer hitch. I ended up spending another $[XX.00] for hitch pin. But, L part of the receiver had 2 pins. Why wasn't there pin for L bracket to trailer hitch itself.


Comments
The manufacturer opted to leave the pin and clip out, and not charge end-users more money, to allow you to choose whatever style hitch pin works best for your application. This ball mount can be used with a standard-style pin and clip # PC3
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
$5.37
or a locking hitch pin # e98880
etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome
$26.23
.
-- Etrailer Expert Victoria B - 10/28/2019


- MT70067
by:

Functions as expected at a good price. Had to add spacers to prevent rattling.



- MT70067
by:

This has been a really good hitch. Easy to use, strong, and very versatile. My Colorado p/u is factory lowered and a standard hitch configuration is so low that launching my boat is nearly impossible. (The tongue is low, making the stern of the boat high. So, the back of the boat doesn't get deep enough into the water.) Pulling the boat off of the bunks is nearly impossible. By raising the ball height, the rear of the trailer rotates downward, getting the stern of the boat more into the water. Even at shallow launch ramps, the boat can float itself from the trailer, and I don't have to pull it off of the bunks. For road trailering, I can lower the ball height to lower the trailer tongue and get a proper weight distribution. This hitch has really worked well for me. If you launch a boat, or recover mobile equipment onto a trailer, being able to securely lower the back of the trailer has a lot of advantages.


31
778
Show More Reviews

Ask the Experts about this MaxxTow Trailer Hitch Ball Mount

  • Ways to Carry a Bike Rack While Towing a Trailer
    We do have a couple options available to accomplish what you need to do, but the MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 10" Drop, 8" Rise # MT70067 cannot be used as a vertical receiver. With that being said, one way to carry a bike rack while towing a trailer will be to add a hitch to the front of your 2019 Ridgeline. The Draw-Tite # 65073 will give you a standard 2 inch receiver and allow you to attach a rack to. However, with bikes on the front of a vehicle it can limit...
    view full answer...
  • Anti-Rattle Device Recommendation for the Ball Mount Platform of MaxxTow Ball Mount part # MT70067
    What you could use as an anti-rattle device for the ball mount platform of the MaxxTow Adjustable Ball Mount part # MT70067 would be the SoftRide Anti-Rattle Hitch Pin # SR25219. You would just need to replace one of the pins with this. I attached a review video for this anti-rattle device. You could use another # SR25219 for the shank in the hitch, or you could use the # RM-061 that you referenced.
    view full answer...
  • Ballmount Rise/Drop Needed for Towing Rental Car Dolly with 2015 Dodge Charger
    The closer you can get the hitch ball height to the level height of the trailer (tow dolly in your case), the better. Towing the trailer nose up or down can cause trailer sway, which you'll want to avoid. For best results, you'll want to get the coupler and ball height within 1-1/2 to 2 inches, and it's better to have the coupler slightly lower than the trailer ball than vice versa. A ballmount with a 7-inch rise like # C45338 would put you right where you need to be, height wise. If...
    view full answer...
  • Recommended Sway Control Bracket and Arm For Maxxtow Adjustable Ball Mount
    Yes, you can add a sway control bracket and sway bar to the Maxxtow Adjustable ball mount part # MT70067 with part # RP26003. I recommend to use the Reese Friction Sway Control Kit part # 83660 that is designed to be used with the Reese sway control bracket.
    view full answer...
  • Adjustable Ball Mount Option that Can do Drop of 10 inches and is Cost Effective
    Clearance issues with the collar lock style of trailer couplers are not typical. I'd be inclined to believe the issue is related to the ball mount you have now not having the clearance. We have the MaxxTow adjustable ball mount # MT70067 which can do a drop of up to 10 inches and is priced really great. This gives a very standard ball mount platform too so clearance would not be an issue. I attached a review video for this for you to check out as well.
    view full answer...
  • Rise or Drop of Ball Mount Needed for 2016 Dodge Grand Caravan
    There is no specific 'best' rise or length of ball mount for a given vehicle. Since the hitch and coupler height of every vehicle and every trailer is different, you'll need to take some measurements. To determine the rise/drop of ball mount needed, you'd want to measure the distance from the inside top of the hitch receiver tube to the ground. Then with the trailer level, measure the distance from the underside of the trailer coupler to the ground. The difference between the measurements...
    view full answer...
  • Anti-Rattle Device Recommendation for MaxxTow Adjustable Ball Mount # MT70067
    The clearances are actually pretty tight between the adjustable channel, shank, and pins of the MaxxTow Adjustable-Height Ball Mount # MT70067 which means it would move a little bit but would not be a super obnoxious rattle. To get rid of the movement between the hitch and the shank of this ball mount though we have the # 63232 which would work well. This doubles as a hitch lock too.
    view full answer...
  • Recommended Weight Distribution Shank With 10 inch Rise
    Since you said the weight of the tongue on your trailer is causing your towing vehicle front end to lift up, it sounds like you do need weight distribution to even the system out. Weight distribution should be used when the trailer weighs more than 50 percent of the towing vehicle. I have attached a link to a helpful article that explains weight distribution you can check out. If you have determined you need a shank with a 10 inch rise I recommend the Curt Weight Distribution Shank,...
    view full answer...
  • Recommended Ball Mount and Hitch Ball for European Trailers
    Thank you for your service. I would be happy to make some recommendations for you. An American style ball mount will work fine when we pair it with a 50mm Hitch Ball on a local trailer in Germany as long as you have a U.S. style trailer hitch on your vehicle with a 2 inch by 2 inch receiver. The look is different, but the function is the same. I'd suggest the MaxxTow Adjustable-Height Ball Mount, # MT70067. This will give you up to a 10 inch drop or a 8 inch rise to allow you to...
    view full answer...
    Image 1 for
  • Locking Hitch Pin Recommendation to Lock Ball Mount Platform of a Hidden Hitch Ball Mount # 80412
    You could replace one of the pins of the MaxxTow Ball Mount # MT70067 with a locking hitch pin like Tow Ready Hitch Lock # 5201. The diameter of the pins on the ball mount platform is 5/8 of an inch just like a standard hitch pin so it should work well. I attached review videos for both of these products for you to check out also.
    view full answer...
  • Diameter of MaxxTow Adjustable-Height Ball Mount Pin Holes
    The pin holes of the MaxxTow Adjustable-Height Ball Mount # MT70067 are all 5/8 inch holes.
    view full answer...
  • Locking Hitch Pins For The MaxxTow Adjustable-Height Ball Mount Part # MT70067
    The MaxxTow Adjustable-Height Ball Mount part # MT70067 has a hollow shank therefore, all of our locking hitch pins designed to work with hollow shanks and 2" hitch receivers will work. I have attached a list of all our locking hitch pins with these specifications for you. For a set of locking hitch pins compatible with your MaxxTow adjustable ball mount, I recommend using 2 of our Trailer Hitch Receiver Lock part # e98881 and 1 of part # e98880 as they can be keyed alike to eliminate...
    view full answer...
  • Recommended Hitch Ball Mount And Hitch Balls For 2015 Ford F-150 XLT
    When you are towing a trailer you want the trailer to be as level as possible behind your F-150. I have attached a helpful article that explains how you can measure to find the best ball mount. You just need a tape measure to do this. Park the truck on level ground and then measure form the ground to the top of the receiver opening. Then measure the distance from the bottom of the trailer coupler to the ground. If the hitch height is greater you will need a ball mount with a drop. If...
    view full answer...
  • Can a High/Low Adapter be Used to Tow Pintle Hook Trailer With Standard 2-Inch Hitch
    Since the height of your pintle-equipped military trailer is so much greater than the height of the hitch on your Honda Pilot (possibly as much as 2 feet) I am not sure there is any way to keep the trailer level when hitched. We do not offer an adapter that can make up this substantial height difference. I suggest you check your Honda Pilot owners manual to confirm the vehicle tow rating. Tow ratings can vary by model year and based on the specific equipment set in your Pilot. You want...
    view full answer...
    Image 1 for
  • Does a 2 inch Trailer Ball fit the MaxxTow Adjustable Ball Mount # MT70067
    The thickness of the tongue on the MaxxTow Adjustable Height Ball Mount # MT70067 is 3/4 of an inch, and it works with trailer balls that have a 1 inch diameter shank. The interchangeable Convert-A-Ball Trailer Ball Set # 900b, that is recommended for use with this adjustable ball mount, has a ball with a shank 2-1/4 inches long and 1 diameter. So it is possible that a trailer ball with a 2 inch long shank may work for you depending on the thickness of the nut and lock washer used...
    view full answer...
    Image 1 for
  • How Much Ball Mount Clearance Is Acceptable For A Hitch Ball?
    An 1/8" of play is acceptable for the hitch ball. Especially with such a light weight hitch rating of the MaxxTow Adjustable-Height Ball Mount # MT70067 at 5,000lbs maximum. We do have bushings that can be used to allow balls to be used that are 1/4" different. Curt Reducer Bushing for Ball Mounts - 1" to 3/4" # C21100 Curt Hitch Ball Bushing - 1-1/4" to 1" # F-2 The 2" Hitch Ball # C40004 has a 1" shank that will fit your ball mount.
    view full answer...
  • Can Friction Sway Control be Used w Adjustable Ball Mounts like MaxxTow Ball Mount part # MT70067
    Yes, as long as you had a sway control bracket like the part # RP26003 you could use your friction sway control unit with an adjustable ball mount like the MaxxTow ball mount part # MT70067.
    view full answer...
  • Easy Way to Have Different Hitch Ball Sizes with the MaxxTow Adjustable-Height Ball Mount MT70067
    I have a better solution for you. Instead of getting 3 different ball platforms for the part # MT70067 so that you can have different hitch ball sizes you would want the part # 900B instead to go along with the ball mount. This hitch ball allows you to easily interchange between the 3 different hitch ball sizes. I attached a review video for you to check out as well.
    view full answer...
  • Hole Spacing of MaxxTow Adjustable-Height Ball Mount Vertical Holes
    The distance between the vertical holes of the MaxxTow Adjustable-Height Ball Mount # MT70067 is 1-1/2 inches. The shank is not sold separately but we do have a selection of shanks for 2 inch hitch receivers that I have attached for you. The vertical hole spacing on the rest of the selection is 1-1/4 inches.
    view full answer...
  • How To Determine The Correct Ball Mount Height
    In order to choose the proper ball mount for your towing setup, you will need to do a bit of measuring. The first thing you will want to measure is from the ground to the bottom of the ball mount coupler on your trailer while level. The next thing you will want to measure is from the ground to the top of the hitch receiver on your vehicle. The difference between the two will give you the proper amount of rise or drop you will need to look for in a ball mount. I have attached our ball mount...
    view full answer...
  • Where to Measure on Trailer and Hitch to Pick Out Correct Rise/Drop Ball Mount
    I am glad the MaxxTow Ball Mount # MT70067 will fit work for both of your trailering setups! This is a unique ball mount in that it offers a great deal of flexibility. The only concern I have is that you are measuring on your vehicle in the wrong place to determine what rise/drop you need. The only reason this matters is that all of the ball mounts have their rise/drop listed measured from the top of the hitch opening and not the bottom where you measured yours. I'd hate for you to end...
    view full answer...
  • Can Adjustable Ball Mounts be Used in the Rise Position
    Yes, adjustable ball mounts like the MaxxTow part # MT70067 can be used in either the rise or drop position. This ball mount in particular can do up to 8 inches of rise and 10 inches of drop. I attached a review video for this ball mount plus a help article on how to pick out the correct rise/drop ball mount that will help you determine how much rise exactly you would need.
    view full answer...
  • Recommended Adjustable Ball Mount With One Inch of Drop
    The MaxxTow Adjustable-Height Ball Mount # MT70067 has a minimum drop of 5 inches so it is not capable of 1 inch of drop. For a ball mount that you can have no drop or 1 inch of drop I highly recommend the EZ Hitch Adjustable, Steel Ball Mount Kit # AM3295. This ball mount can be used in the drop or rise position and will give you a maximum of 4 inches of drop or 4 inches of rise and can be adjusted in 1 inch increments. This ball mount fits 2 inch hitches, comes with a 1-7/8 inch...
    view full answer...
  • Availability of Adjustable Ball Mount Like MT70067 With Higher Weight Capacity
    We don't offer an adjustable ball mount exactly like the MaxxTow # MT70067 but we might have something that would work for you. I looked up the poly hitch you spoke of, and it looks like it's similar to the Lock N Roll articulating hitches we offer. The largest drop Lock N Roll hitch we offer is part # 336VS503515 which offers up to an 8-1/4 inch drop with an 11K weight capacity. The Lock N Roll hitch is compatible with a corresponding coupler, which I've linked for you.
    view full answer...
  • What is the Class Rating for MaxxTow Adjustable Ball Mount # MT70067
    MaxxTow adjustable ball mount # MT70067 is designed to fit 2 inch trailer hitches which are found on Class III and IV trailer hitches. It is rated for 5,000 pounds gross trailer weight so it is more suited for a Class III hitch.
    view full answer...
  • What Locks Will Fit MaxxTow Adjustable-Height Ball Mount # MT70067
    To secure both the shank and ball platform portions of the MaxxTow Adjustable-Height Ball Mount # MT70067 to your RV you can use two of our Hitch Receiver Locks # e98881. The # e98881 provides an extra wide center span of 3-5/8-inches, which is more than enough to comfortably fit the 2-5/8-inch outside dimension of the MaxxTow ball platform. To secure the 2-inch shank portion to your receiver you will use a second unit. Multiples of these locks are available keyed alike for convenience...
    view full answer...
  • Availability of 2-1/2-Inch Adjustable Ball Mount
    The MaxxTow Adjustable-Height Ball Mount # MT70067 is designed for 2-inch hitches. The Class V hitches offered for your 2013 Ram 3500 4x4 dually are offered in this 2-inch size like Curt's # C15409 but also in the 2-1/2-inch size like their # C15809. If you have a 2-1/2-inch hitch and need an adapter sleeve to allow use of this MaxxTow ball mount you can simply add the reducer sleeve # 58102. This converts a 2-1/2-inch hitch to a 2-inch, and causes no loss of hitch capacity. If you...
    view full answer...
  • Will SoftRide Anti-Rattle # SR15219 Work With MaxxTow Adjustable Ball Mount # MT70067
    It is not recommended to deviate from the original manufacturer components because the combination has not been tested together for fit, compatibility and safety. With that being said, I went to the warehouse and measured the holes of the MaxxTow # MT70067 channel portion and the diameter is 11/16 of an inch and the diameter of the pin that comes in the package is a 1/2 inch. The SoftRide Anti-Rattle Hitch Pin # SR25219 has a pin diameter of 5/8 inch, which is 1/16th inch smaller...
    view full answer...
  • Friction Sway Control Mounting Tabs for 2-Inch Ball Mounts
    We do offer a 2-inch ball mount that has a friction anti-sway mounting tab already welded in place, Curt # D320, but this ball mount offers 2-inches of drop, not 4-inches. We do offer a 2-inch no-welding Sway-Control Bracket # RP26003 that fits on your ball mount in addition to the simple weld-on tabs # C45822 and # 3442.
    view full answer...
  • Adjustable Ball Mount for 2019 Ford Ranger Towing Travel Trailer
    The best option we can provide without knowing the trailer and hitch height would be an adjustable ball mount like the # MT70067 which can be adjusted up to a drop of 10 inches so we know it can give you the ability to tow your trailer level.
    view full answer...

Do you have a question about this Trailer Hitch Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Brandon M
Expert Research:
Brandon M
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Rachael H
Expert Research:
Rachael H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Written by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee David F
Installed by:
David F
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Chris R
Video Edited:
Chris R
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Mike S
Updated by:
Mike S
Employee Matthew K
Test Fit:
Matthew K
Employee Dustin K
Video by:
Dustin K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624