Insert this camo-covered heavy-duty mount into your 2" hitch to get 3 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 1,500 lbs.
Features:
Specs:
This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 3 stacked receivers that sits along the vertical shank of the unit. This dual-ball mount lets you tow a trailer with a 2" ball coupler or a 2-5/16" ball coupler.
Also included is a pintle lock, which can be inserted into the receiver directly above the ball mount to create a pintle hitch for hooking up a trailer with a lunette ring. Unlike other adjustable pintle hooks on the market, there are no nuts and bolts to remove and retorque when you change the positioning of this hitch. Just move the ball mount and pintle lock up or down to get the proper height and secure them in place with the included pins.
With the 3 stacked receivers, not only do you have the ability to adjust the height of the included ball mount, but you also have the ability to add various other hitch-mounted accessories. Insert a bike rack or cargo carrier. Mount a spare tire carrier. Use a tow bar to flat tow your vehicle. Or just add a fun hitch cover.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. Let's take a look together at this Gen-Y Camo adjustable two-ball mount with stacked receivers. Now, this adjustable ball mount features this really nice mossy oak camouflage design. This is gonna look great on the back of your truck if you're, maybe, using a trailer that's got a camouflage design, maybe your truck does as well. This will be great to take out hunting or boating. So a really unique design that Gen-Y has put on this particular ball mount with stacked receivers.
Again, this is known as the mossy oak camouflage design. This is going to slide into your two-inch trailer hitch receiver and then give you three stacked two-inch receivers. So you can hook up your trailer to your tow vehicle with the included two-inch ball or 2 5/16-inch hitch ball, or you can tow a trailer that has a Lunette ring on it using the 2 5/16-inch hitch ball, paired with this included pintle lock. Lemme give you a brief demonstration of how that works. So you would just slide your Lunette ring over this 2 5/16-inch hitch ball.
And then I'm just gonna pull the pin and clip here. And then you'll just pull out this Lunette ring or pintle lock rather. And as you can see, that's going to go over the ring and then I'm gonna just slide my pin back into place. And then when you secure it with the clip, that's gonna secure this pintle lock over that Lunette ring. So that's a really cool addition that this offers.
And then when you're done using it, you can just retract it, replace the pin to keep it in that position, and then the clip. So it's going to be as simple as that. Now, this is going to give you quite a bit of flexibility with these three stacked receivers. Again, each of these receivers are going to be two-inch in size, and you're gonna be able to easily adjust the height of this included ball mount or any other accessory that you choose to use. So you can tow trailers at different heights with the same vehicle.
The included aluminium pin and clips are going to secure that attachment to the pintle lock. The accessory hole diameter is 5/8 of an inch. Now,, this is going to give you a maximum drop of about five inches. And then when you flip this over, it's gonna give you a maximum rise of about five inches. I do have this in the dropped orientation and this is going to give you a gross towing weight with both balls of 10,000 pounds and a tongue weight, again with both balls of 1,500 pounds. And the hitch pin hole diameter is 5/8 of an inch. And the hitch pin and clip are not included with this. And you might already have one for your hitch anyway. But if you don't, we do have a lot of options available here at etrailer.com. However, I consider this an investment that you're making with this type of ball mount. So if you don't already have hitch lock options, I would recommend taking a look at some of those options that we have here at etrailer.com to secure this to the back of your truck so you don't have to worry about theft. Now, I just want to give you some basic measurements of this, but we do have more measurements with diagrams on this product page if there's some other measurements that you're looking for. But just some basic ones here. From the center of our hitch ball to the center of our first hitch pin hole, it's gonna be about 11 5/8 inches. And then moving down to the second hitch pin hole, about 12 5/8 inches. And again, if you are looking for more specific measurements, then what I covered with you today, please check out this product page. Now, this is made here in the USA of heavy duty steel, and so this is going to be very durable for you and has a zinc primer and a powder-coat finish that's gonna help resist rust and corrosion. As you might know, Gen-Y hitch has a great reputation of building very durable, very robust products. Sometimes they're described as overbuilding their products. So when you get a Gen-Y hitch product, you can be confident that it's going to last you a long time, it's gonna hold up to the rigors of towing, and it's going to be a very well-built, well-designed product. Well, I think that's gonna wrap up our brief look today. I do hope that our time together was helpful for you. Again, my name is Andy. Thank you for joining me.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.