See what our Experts say about this Gen-Y Hitch Trailer Hitch Ball Mount

• Is It Safe to Invert the Malone Dual Receiver Adapter for Towing?
  It is not recommended to invert the Malone 2" Dual Purpose Hitch Receiver # MPG544 for towing purposes. The extended receiver is only intended for accessory use not for a ball mount and trailer connection. Your trailer hitch's tongue weight will also be reduced by 50% when you use your bike rack in this adapter, so you will want to account for that as well. My recommendation is to use a longer ball mount like the # D-26 to give you that extra length you desire.
  view full answer...
  
• Dual Hitch Receiver that Keeps a Flat Tow Set-up at the Same Height with Minimal Rise for Bike Rack
  I do have another option for you, but you are correct that the Roadmaster Dual Hitch Receiver Adapter # RM-077-4 would not work with your Jeep sitting +2" already because you would be sitting with the Jeep at +4" with the # RM-077-4 adapter. We do have the Curt Dual Hitch Extender # D-192 which will maintain your current height for your flat tow set up and provide a second hitch receiver with a 5-3/4" rise for you bike rack. This is the smallest rise we have for a dual hitch adapter that...
  view full answer...
• Recommended Dual Ball Mount for Using a Bike Rack While Flat Towing a Vehicle
  You are on the right track but you need to use the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers item # 325-GH-315 instead. This ball mount is rated to be used with a flat towing set up and a bike rack. The Gen-Y Phantom Hitch Ball Mount item # GY27VR can only be used with Gen-Y accessories. It's not built strong enough to support a flat towed vehicle and a bike rack. If you don't have any intention of using the ball mount to tow a trailer, then I recommend just getting the Replacement...
  view full answer...
• Can Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers be Used With EcoHitch on 2021 Toyota Sienna
  The Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 10K # 325-GH-315 can absolutely be used with the EcoHitch on your 2021 Toyota Sienna. This will fit any hitch with a 2" receiver. The one thing you have to keep in mind is the capacity. The # 325-GH-315 has a gross towing weight of 10,000 lbs and max tongue weight of 1,500 lbs but you will be limited by the capacity of your hitch or vehicle, whichever is lower.
  view full answer...
• Recommendation For Heavy Duty Hitch For 2015 Ford F-150 With 2 Balls - 2 Inches And 2-5/16 Inches
  We have a great hitch that will work well for you. The Gen-Y Adjustable 2-Ball Mount w/Stacked Receivers, Item # 325-GH-315, is one of our top-end hitches that is heavy duty and very adjustable. It has a maximum towing weight capacity of 10,000-lbs and a maximum tongue weight capacity of 1,500-lbs. It has a maximum rise/drop of 10-inches. It comes with two balls: 2-inch and 2-5/16-inch. This Gen-Y hitch ball mount is made in the USA. I also recommend getting the Gen-Y Anti-Rattle...
  view full answer...
  
• Is Dual Sway Control Bracket Compatible With Gen-Y Phantom X Adjustable Ball Mount
  Yes, but you would have to add the replacement 2-ball mount for the standard Gen-Y in order to secure the bracket. So what you would need is the following: - Gen-Y Phantom X Adjustable Ball Mount w/ Stacked Receivers for 2" Hitch - 10" Drop/Rise # GY59VR - Replacement 2-Ball Mount for Gen-Y Adjustable Ball Mounts # 325-GH-031 - Dual Sway Control Bracket for Gen-Y Adjustable Ball Mounts with 2" Receivers # 325-GH-300-1 So you could do that in order to use a friction sway control system...
  view full answer...
• What Length of Hitch Pin Lock for Holding Attachment into Gen-Y Adjustable Ball Mount
  The pins that hold the ball mount attachment into the vertical openings of the # 325-GH-315 have a span of 3-1/2 inches and a diameter of 5/8 inch so for a hitch lock that would work with this you'd want the Draw Tite part # BD580412.
  view full answer...
• 10 Rise Adapter Needed to Tow 3,500 lb Pintle Hook Trailer
  We have exactly what you are looking for! Gen-Y has a stacked receiver design that is built around heavy-duty applications like what you are looking to do. For a 10" rise that will match up with your 3,500 lb pintle hook trailer we have part # 325-GH-315 which comes with a 2" and a 2-5/16" dual hitch ball (just replace it with your pintle hook) or part # 325-GH-325 which is the same thing except it has the pintle hook attachment. Both of these are rated for 10K towing and 1.5K tongue weight...
  view full answer...
  
• Can the Roadmaster 10 Drop/Rise Adapter be Used for a Cargo Carrier and Bike Rack
  You could potentially use the Roadmaster Dual Hitch Receiver Adapter # RM-077-10 for a cargo carrier and bike rack but you will be reducing the space on your carrier (like you said) and you are limited to 400 lbs of tongue weight. This includes the weights of your carrier, bike rack, plus the cargo/bikes that you will be carrying. Since 10" is quite a bit of drop I am guessing that your tow vehicle is a bit taller like a lifted pickup. If this is the case then you may be interested in...
  view full answer...
• Can I Use A Hitch Mounted Outboard Motor Carrier And Tow A Travel Trailer At The Same Time?
  Hey Brad. Your best bet will be to use a Gen-Y stacked receiver ball mount like part # 325-GH-315. This ball mount features 5 stacked 2" receivers. So you will be able to use the ball mount attachment for your trailer, then the outboard motor carrier could go in one of the uppermost receivers. This ball mount is rated for 1,500 lbs of tongue weight, which should be more than enough for your trailer and the weight of the motor. The 2022 Toyota Sequoia SR5 can tow up to 7,400 lbs for 2wd...
  view full answer...
• Recommendation For Dual Hitch To Tow Travel Trailer and Carry Bike Rack
  Based on your information, a dual hitch extender like the Curt Adapter, Item # D-192, will not work for you or with a weight distribution system. About the only way you can have both a bike rack and a weight distribution system is to look at something like the Gen-Y Adjustable 2-Ball Mount with Stacked Receivers, Item # 325-GH-315. With this ball mount, you will be able to tow your trailer with weight distribution and carry a 2 inch hitch mounted bike rack. For example, the Kuat Beta...
  view full answer...
• Adjustable Ball Mount on a Ford F-250 Tremor for Pulling a Bass Boat
  I recommend the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 10K item # 325-GH-315. This ball mount will give you a wide range of options for drop and extension away from the back of your Ford F-250 Tremor. I have linked a diagram detailing the dimensions.
  view full answer...
  
• Recommended Hitch Adapter To Raise A Bike Rack Higher
  Hey Joe, There are a variety of hitch adapters available that can help raise the bike rack higher, but most do come with stipulations to their usage or will reduce the the capacity of the trailer hitch by 50%. The Patriot Hitches Adjustable Drop Hitch Receiver Adapter # PH67SR you were looking at would work (and there's pictures of others using it this way in the reviews). My only complaint is that the anti-rattling bolts do tend to loosen up pretty easily over time and rattle, which isn't...
  view full answer...
• Recommendations For Towing Camper Trailer and Carrying Bike Rack At The Same Time
  We have exactly what you are looking for. While there is not a dual hitch adapter that is rated for towing a 4500lb - 5000lb camper and a bike rack at the same time, there is a ball mount that is more than capable. The Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers # 325-GH-315 can be used with a weight distribution hitch, and one of the unused receivers can be used to carry your bike rack. You will just need to stay under the 1500lb tongue weight rating of the ball mount or the tongue...
  view full answer...
• Recommendation To Allow Towing With Weight Distribution System and Use Bike Rack
  The Roadmaster Dual Hitch Receiver Adapter, 4" Drop/Rise # RM-077-4 is rated for up to 10,000 lbs towing, but only 400 lbs tongue weight and is only intended for flat towing. The manufacturer notes this should not be used for towing. There isn't a dual hitch adapter that is compatible with a weight distribution hitch, but there is a ball mount that is rated for this use and can use a cargo carrier or bike rack at the same time. I recommend the Gen-Y Adjustable 2-Ball Mount w/ Stacked...
  view full answer...
• Can Gen-Y 325-GH-315 Adjustable Stacked Receiver Ball Mount Be Used for Flat Towing
  Although you won't need the ball portion for this purpose, you can certainly use the Gen-Y # 325-GH-315 Adjustable Ball Mount for flat towing. Just to be sure, I've confirmed this with Gen-Y for you. I've linked to a product description video featuring the # 325-GH-315 ball mount you'd asked about.
  view full answer...
• Can the Gen-Y Adjustable Ball Mount With Stacked Receivers Be Used As A High/Low Adapter
  Yes, you can use the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 10K # 325-GH-315 as a high/low adapter for your tow bar. The only Gen-Y stacked receivers you can't use for this are the Gen-Y Rebel like the # GY62FR.
  view full answer...
• Determining The Correct High/Low Adapter To Tow A Geo Pro 19FBS With A 2020 Chevy Colorado
  To know the exact rise/drop needed to keep your Geo Pro 19FBS level with your 2020 Chevy Colorado you'll need to measure from the ground to the top of your hitch receiver opening while your truck is parked on level ground. The next step is to measure from the ground to the bottom of the coupler on your trailer while it's level. Once you have these measurements you can subtract the Coupler Height from the Hitch Height to find the Rise/Drop needed. ex. 15" Hitch Height - 10" Coupler Height...
  view full answer...
• Dual Hitch Option For Chevy Tahoe For Towing Travel Trailer And Carrying Bike Rack
  Hey Dave, thanks for getting in touch. I do have a solution for you, but the dual hitch adapters like the Roadmaster # RM-077-10 cannot be used for towing a trailer. They are for flat towing only. A better option is to use the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers part # 325-GH-315. This is basically an adjustable ball mount that features five stacked 2" receivers. It is rated for towing up to 10,000 lbs or 1,500 lb of tongue weight and I actually recommend these for this...
  view full answer...
• 10 inch Rise Ball Mount with 2 inch Hitch Ball Options
  The Gen-Y stacked adjustable ball mount part # 325-GH-315 does have ability to provide 10 inches of rise as well as has a 2 inch hitch ball that you could use. If you were wanting a standard ball mount you could use the part # 80248 with the 2 inch ball # 63845 and you'd be set.
  view full answer...
• How Can I Carry My 1up Hitch Bike Rack While Towing My 2017 Lance 1895 Trailer
  My recommendation is to use a hitch adapter. You could use something like the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 10K, part # 325-GH-315, to carry your 1up rack. This rack should not cause any issues with your trailer's turn radius. The Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers - 2"-100 lbs, part # CC-275, you attached to your question will also work. It is not as robust of an option. This solution will...
  view full answer...
• Can Gen-Y 10K Adjustable Stacked Ball Mount 325-GH-315 Be Used for Winch Mount on Car Trailer
  Gen-Y 10K Adjustable 2-Ball Mount with Stacked Receivers # 325-GH-315 is suitable for your application holding a winch mount and winch for pulling cars onto your trailer. In this horizontal line pull configuration the winching force/car weight will appear to the ball mount to be just like trailer weight so the ball mount can be used with up to a 10K load, or up to the capacity of your winch mount, winch or its cable or strap. Naturally the hitch on your diesel pickup also needs to be...
  view full answer...
• Is There A Swing-Away Hitch Adapter That Can Haul E-Bikes And A Boat
  Hey Kevin, Swing-away hitch adapters can't be used to tow and aren't designed to be used with other hitch adapters so you wouldn't be able to tow your boat and haul a bike rack at the same time. Swing-away adapters will also reduce the overall capacity of your trailer hitch by 50% as well so it would likely make you overloaded hauling e-bikes. If your goal is to be able to haul your bikes and trailer together then yo-u can used a stacked receiver like Gen-Y's # 325-GH-315. This would...
  view full answer...
• Recommended Drop Adapter for RockyMounts BackStage Bike Rack on a 2019 Subaru Ascent with OEM Hitch
  Since the bike rack that you have is the RockyMounts BackStage # RKY10002 that has the swinging arm I recommend using a Gen-Y Hitch over the Roadmaster Dual Hitch Receiver Adapter # RM-077-10. Reason being that the Roadmaster is typically used for applications where a flat towed vehicle is also being used. I'm afraid that putting that much weight out to the side may not be good for the adapter. We do carry a variety of Gen-Y Hitch adjustable ball mounts that you can choose from. I'm not...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?