Insert this heavy-duty mount into your 3" hitch to get 5 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 3,500 lbs.
Features:
Specs:
This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 5 stacked receivers that sits along the vertical shank of the unit. This dual-ball mount lets you tow a trailer with a 2" ball coupler or a 2-5/16" ball coupler.
Also included is a pintle lock, which can be inserted into the receiver directly above the ball mount to create a pintle hitch for hooking up a trailer with a lunette ring. Unlike other adjustable pintle hooks on the market, there are no nuts and bolts to remove and retorque when you change the positioning of this hitch. Just move the ball mount and pintle lock up or down to get the proper height and secure them in place with the included pins.
With the 5 stacked receivers, not only do you have the ability to adjust the height of the included ball mount, but you also have the ability to add various other hitch-mounted accessories.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Gen-Y adjustable 2 ball mount with the pintle lock and the 12 inch drop or rise for a 3 inch hitch. And this has a 32,000 pound gross towing weight capacity. Now this is an adjustable ball mount that'll let you hook up your trailer to your tow vehicle. The shank portion right here is what'll slide into your 3 inch hitch receiver on your vehicle. And then up front, you have your choice of either a 2 inch diameter ball or a 2 5/16 diameter ball which'll provide the connection points for your trailer coupler.
Now, with this part, if you notice this also includes this pintle lock accessory. When this is paired with the larger 2 5/16 diameter ball it's gonna provide a nice connection point for a lunette ring coupler. And the lunette ring couplers, I just want to pop up an insert to show you what we're talking about, on some of the large, heavy-duty trailers, they'll use that lunette ring. If you notice in the picture there, it's designed to drop over the ball, but when it drops over that, you wanna make sure it stays on there and doesn't come loose. You use this pintle lock accessory right here.
And just to show you how you would do that is you would just take out your clip and your pin, slide this back out of the way, and then you'll make your connection with your lunette ring over the ball. Once it's in place, then you'll slide this over the lunette ring and then take your pin, once you get it lined up, put the clip in there and that locks it into place. And you can see it's locked there and keeps the ring from coming up over the ball. So if you're not gonna use it for our lunette ring, you can actually just also store it away. It gives you a second hole that you can slide this back, put your pin and clip through there, go ahead and insert.
Now you can see it's out of the way and you can use it for a regular coupler. Now the capacity in this will be determined by the ball size that you use. So if you use this larger 2 5/16 diameter ball, gross towing weight capacity is gonna be 32,000 pounds, maximum tongue weight of 3,500 pounds. If you use the, if you flip this around and use the 2 inch diameter ball, gross towing weight on that is 16,000 pounds, maximum tongue weight of 1500 pounds. If you notice this has 5 stacked 2 1/2 inch size receivers, these will accept the included ball mount and pintle lock, like we showed you, as well as other hitch mounted accessories.
It does come with the 2 3/4 inch diameter stainless steel pins and clips and those are included to secure the ball mount to the shank, the pintle lock to the shank. And what's nice about these, I really like these clips on these. If you notice, when I use them, they're very easy to remove or install. They're called a twist design. It's a really nice design. Instead of the straight clips which sometimes are a pain to try to install, this has a little twist clip on it, and the way you get it off is just by twisting it just like that, comes right off, slide your pin out. And then when you go to install it, just push it. And as you push it, it'll twist and clip right into place. Very easy to take off or install. Now, this does give you an adjustable height. This will let you tow trailers of different heights with the same vehicle, works well if you have a lifted truck, basically this ball mount can be lowered or raised to match your application. Now, if you do use this in the lowest position right here that's the maximum drop, it gonna be 12 inch drop. If you do flip the shank over into the rise position and then use this in the highest position it'll get you maximum rise of 12 inches. And just to show you how the ball can be, slide the pin and clip out for the ball mount and you can see that slides right out, and I'm gonna turn it over to use the 2 inch. And I'm just gonna slide it back in the same place. But as I mentioned, you could put it in the height you need. Once we slide it in far enough, and we get the hole to line up, There we go, slide our pin all the way through, take our clip, again, it's just twist on, and just like that, now you're ready to go with the 2 inch. So pretty easy to choose what ball size and what height to use. This is a heavy-duty steel construction. They do use a zinc primer and a black powder coat on the 2 ball mount and the pintle lock. The shank is a primer with a durable silver vein epoxy powder coat on the shank to resist corrosion. Now, when you do install this into your hitch receiver it will require a hitch pin and clip or hitch lock to secure it to the hitch receiver. Those are not included. We do sell those separately on our website and they do give you two different size pin holes. You can either use the 3/4 inch size or the smaller 5/8 inch diameter. This part is SAE J684 certified. It is made in the USA. Application again, it fits 3 inch by 3 inch trailer hitch receivers. And one last note I do want to mention, because this ball mount has many different dimensions to it, I do recommend for you to go to the product page of this part number to verify any dimension that may be needed for your application. We do list it on the product page. But that should do it for the review on the Gen-Y adjustable 2-ball mount with the pintle lock the 12 inch drop and rise, for a 3 inch hitch..
Average Customer Rating: 4.8 out of 5 stars (553 Customer Reviews)
Insert this heavy-duty mount into your 3" hitch to get 5 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 3,500 lbs.
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.