1. Trailer Hitch Ball Mount
  2. Gen-Y Hitch
  3. Fits 2 Inch Hitch
  4. Adjustable Ball Mount
  5. Drop - 7-1/2 Inch
  6. Rise - 7 - 1/2 Inch
Gen-Y Rebel X Adjustable Ball Mount w/Stacked Receivers - 2" Hitch - 7-1/2" Drop/Rise - 7K

Gen-Y Rebel X Adjustable Ball Mount w/Stacked Receivers - 2" Hitch - 7-1/2" Drop/Rise - 7K

Item # GY99VR
lowest price pledge
Our Price: $159.99
Trailer Hitch Ball Mount
This item qualifies for Free Shipping
Shipping Weight: 20 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Great for towing your mid-size camper or utility trailer, insert this adjustable mount into your 2" hitch to get 5 stacked 2" receivers. Insert a ball mount or other hitch-mounted accessory into 1 of the receivers. Lowest Prices for the best trailer hitch ball mount from Gen-Y Hitch. Gen-Y Rebel X Adjustable Ball Mount w/Stacked Receivers - 2" Hitch - 7-1/2" Drop/Rise - 7K part number GY99VR can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (1)
  • Q & A (2)
  • Videos (2)
  • Photos
  • Why etrailer?

Gen-Y Hitch Trailer Hitch Ball Mount - GY99VR

  • Fits 2 Inch Hitch
  • Adjustable Ball Mount
  • Drop - 7-1/2 Inch
  • Rise - 7 - 1/2 Inch
  • No Ball
  • 7000 lbs GTW
  • Stacked Receivers
  • Gen-Y Hitch
  • Steel Shank - Gloss Black

Great for towing your mid-size camper or utility trailer, insert this adjustable mount into your 2" hitch to get 5 stacked 2" receivers. Insert a ball mount or other hitch-mounted accessory into 1 of the receivers.


  • Adjustable ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into hitch receiver on your vehicle
    • Ball platform provides mounting point for hitch ball (sold separately)
  • 5 Stacked receivers accept ball platform as well as other hitch-mounted accessories
    • 1 Pin included to secure ball platform or accessory to shank
  • Adjustable height lets you tow trailers of different heights with the same vehicle
    • Drop ball mount lower or raise it higher to match your application
  • Heavy-duty steel construction
  • Powder coat finishes resist corrosion
  • Hitch pin and clip or hitch lock for securing to hitch receiver sold separately
  • Made in the USA


  • Application: 2" x 2" trailer hitch receivers
  • Built-in receiver size: 2" x 2"
  • Maximum drop: 7-1/2"
  • Maximum rise: 7-1/2"
  • Gross towing weight: 7,000 lbs
  • Maximum tongue weight: 700 lbs
  • Limited lifetime warranty

GH-13155X GenY Hitch Adjustable Ball Mount for 2" Hitch Receivers - Rebel X Series - 7.5" Offset Drop/Rise - 7K

Video of Gen-Y Rebel X Adjustable Ball Mount w/Stacked Receivers - 2" Hitch - 7-1/2" Drop/Rise - 7K

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Gen-Y Rebel X Ball Mount with Stacked Receivers Review

What's up everybody it's AJ with etrailer.com. Today we're gonna be checking out this Gen Y rebel adjustable ball mount. It's going to be great for two inch by two inch hitches. And what you're going to do, is you're going to be able to switch it up for whatever trailer you need. So if you have a couple of different trailers, you have a boat trailer or an enclosed trailer like this, and they're different heights, you don't always have to get a different ball mount and slide in there. All you have to do is pull this pin and move it up or down in whatever position you need it to be.

Then you get on the road quicker. Let's check it out. Right out of the gate, we'll let you know that it's a gross total weight of 7,000 pounds. So it's 7K is where that comes from. We're looking at a couple of different versions of this today, but they're all going to be 7K weighted.

So that's what you're going to be working with. Other than that, they're all going to have that same black powder coat steel. I mean they're going to hold up, whether you leave them in the back of the hitch when you're not using them, or you put them in the back and keep them protected here. You don't have to worry about rusting, corrosion, or the elements getting to it at all. It's really easy to use.

I like how you just pulled this clip on this side. Pull the pin and you can adjust the ball up or down. In these challenged, in these channels, excuse me, and they're each going to be two and a half inches apart from each other. So that's going to be your points of adjustment, just to keep it in mind. Think about your trailer and your truck and what exactly you need.

Take a closer look at it with the trailer removed from it. You can see the mount and the ball here. It does not come with the ball. So you're going to buy one separate. We have a two and 5/16 one here for this trailer. Something I would recommend is you can buy another one of these mounts on the side and get a different ball. So if you have two different trailers with two different sizes, you can get a two inch ball and a two and 5/16 and swap out whatever you need. Like I said, it's as easy as pulling this pin and removing it and you can put the other one in and you can be on your way. I really like that, that the whole point of this being adjustable, is you can fix the height or just swap out this ball real quick and get on the road. I want to put them side by side so you could see what your options are going to be. Now, this one's going to have three stacked receivers. This was going to have four, which is going to change your rise and your drop. So let's go to this one first and talk about it. This one's going to have a drop of six inches and a rise of four and a half. Then this one to the right, it's going to have a drop of eight and a half inches and a rise of seven inches. So just kind of think about what truck and trailer combination you have. How much adjusting you have to do and what you're actually going to need to figure out which ones work for you. Now they're both weighted for 7,000 pounds. You don't have to worry about that. It's just a matter of how much adjustment you're going to have to do. Do you have to go from here to here all the time Or do you need more than that Is this not enough when even if you flip it around, do you need more than just a little bit That'd be this one here. You see, you get that lower adjustment, or if you flip it, you get that raised adjustment and that position. And just depends on which one you need for what trailer and truck combination, like I said. Another great thing about this, is that you can swap out your ball mount for hitch-mounted accessories. Cause it is just a two inch by two inch shank. And they're just stacked up on top of each other. So here's the step from Gen Y and you can go in any of these positions where you even need to step. So I kind of liked that because, again, you don't have to take this whole assembly out and mess with it. You can leave this in your hitch and you just swap out your accessories here just making it easier to do so and use these things when you need them. So just the pin and a clip. And now your step's ready to use. Overall I think it's going to be a really great thing to have. It's going to help and save time when you're hooking up to your different trailers. If you have a boat trailer, an enclosed trailer, there's no more swimming, swapping out of the whole assembly. Getting this one out of here. Switching things around. All you gotta do, pull this clip and this pin, switch out the ball or just adjust the height and you're good to go and hit the road. Well, that does it. Thanks for hanging out. And I hope this helps..

Customer Reviews

Gen-Y Rebel X Adjustable Ball Mount w/Stacked Receivers - 2" Hitch - 7-1/2" Drop/Rise - 7K - GY99VR

Average Customer Rating:  5.0 out of 5 stars   (1 Customer Reviews)

Great for towing your mid-size camper or utility trailer, insert this adjustable mount into your 2" hitch to get 5 stacked 2" receivers. Insert a ball mount or other hitch-mounted accessory into 1 of the receivers.

- GY87VR

Review from a similar Rebel X Hitch Ball Mount in Trailer Hitch Ball Mount

Great product!


Ask the Experts about this Gen-Y Hitch Trailer Hitch Ball Mount

  • Where Is the Convert-A-Ball Adjustable Ball Mount for 2" Hitches TK5007 Made
    The Adjustable Ball Mount for 2" Hitches part # TK5007 is a great economical adjustable ball mount option. It however is made overseas. If you're looking for USA made you'll have to consider some higher end options. The Gen-Y Rebel X Adjustable Ball Mount part # GY99VR is a great choice made in the USA. It offers up to a 7.5" drop. I have attached a list of Gen-Y ball mounts which are all made in the USA.
    view full answer...
  • How To Determine The Correct High/Low Adapter For Flat Towing A Jeep By The D-Ring Mounts
    There's about a 3" threshold from level that your tow bar can be and still safely tow your vehicle. The brand of the high/low adapter doesn't matter so you could use a different brand if you wanted to. Since you have a 7" difference the Roadmaster High-Low Adapter for Tow Bars # RM-076 you were looking at would place you into the safe zone. If you tow multiple trailers that require a high/low adapter you could use the Gen-Y Rebel X Adjustable Ball Mount w/Stacked Receivers # GY99VR which...
    view full answer...
    Image 1 for

Do you have a question about this Trailer Hitch Ball Mount?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Jonathan Y
Video by:
Jonathan Y
Employee Conner L
Installed by:
Conner L
Employee Michael B
Installed by:
Michael B
Employee Mike S
Written by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.