1. Trailer Hitch Ball Mount
  2. Gen-Y Hitch
  3. Fits 2 Inch Hitch
  4. Adjustable Ball Mount
  5. Drop - 10 Inch
  6. Rise - 10 Inch
Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 16K

Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 16K

lowest price pledge
Retail:$370.43
Our Price: $298.99
You Save: $71.44
Trailer Hitch Ball Mount
This item qualifies for Free Shipping
Shipping Weight: 41 lbs
Quantity: 
325-GH-515 - Steel Shank - Gray Gen-Y Hitch Trailer Hitch Ball Mount
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Product Expert Alexander C

Is this right for you? Product Expert Alexander C says:

Yes, if you:

  • Need a mount that is built like a tank for your tough towing jobs
  • Want to attach your 2" receiver bike rack or tire carrier

No, if you:

  • Can't lift a heavy, bulky mount or have nowhere to stow it when it's not on your truck
  • Frequently drive around winding roads, because the mount can wobble
  • Don't want to spend a premium cost
Insert this heavy-duty mount into your 2" hitch to get 5 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, or other hitch-mounted accessory. Lowest Prices for the best trailer hitch ball mount from Gen-Y Hitch. Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 16K part number 325-GH-515 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (65)
  • Q & A (4)
  • Videos (2)
  • Photos
  • Why etrailer?

Gen-Y Hitch Trailer Hitch Ball Mount

  • Fits 2 Inch Hitch
  • Adjustable Ball Mount
  • Drop - 10 Inch
  • Rise - 10 Inch
  • Gen-Y Hitch
  • 2 Inch Ball
  • 2-5/16 Inch Ball
  • Two Balls
  • 16000 lbs GTW
  • Stacked Receivers
  • Steel Shank - Gray
  • Steel Ball

Insert this heavy-duty mount into your 2" hitch to get 5 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, or other hitch-mounted accessory.


Features:

  • Adjustable ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into hitch receiver on your vehicle
    • 2" Ball or 2-5/16" ball provides connection point for trailer coupler
  • 5 Stacked receivers accept included ball mount, as well as other hitch-mounted accessories
    • 1 Pin included to secure accessories to shank
  • Adjustable height lets you tow trailers of different heights with the same vehicle
    • Drop ball mount lower or raise it higher to match your application
  • Heavy-duty steel construction
  • Zinc primer and powder coat finishes resist corrosion
  • Hitch pin and clip or hitch lock for securing to hitch receiver sold separately
  • SAE J684 certified
  • Made in the USA


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Built-in receiver size: 2" x 2"
  • Maximum drop: 10"
  • Maximum rise: 10"
  • 2" Ball capacity:
    • Gross towing weight: 12,000 lbs
    • Maximum tongue weight: 1,500 lbs
  • 2-5/16" Ball capacity:
    • Gross towing weight: 16,000 lbs
    • Maximum tongue weight: 2,000 lbs
  • Overall height: 13"
  • Total length with included ball mount installed: 16"
    • Total length without ball mount installed: 12"
  • Hitch pin hole diameter: 5/8"
  • Accessory pin hole diameter: 5/8"


dimensional diagram

Multiple Stacked Receivers for Easy Adjustment

stacked receivers

This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 5 stacked receivers that sits along the vertical shank of the unit. This dual-ball mount lets you tow a trailer with a 2" ball coupler or a 2-5/16" ball coupler.


With the 5 stacked receivers, not only do you have the ability to adjust the height of the included ball mount, but you also have the ability to add various other hitch-mounted accessories. Insert a bike rack or cargo carrier. Mount a spare tire carrier. Use a tow bar to flat tow your vehicle. Or just add a fun hitch cover.


How to Measure Drop on Adjustable Ball Mount


GH-515 GenY Hitch Adjustable Versa Ball Mount for 2" Hitch Receivers - 10" Drop/Rise - 16,000 lbs

Item # 325-GH-515





Video of Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 16K

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Gen-Y Adjustable 2-Ball Mount with Stacked Receivers Review

Hey, everybody. Today, we're going to be going over and showing you how to install the line of Gen-Y adjustable two ball mounts for two inch hitches. So our Gen-Y ball mount here is going to be an adjustable ball mount. Now adjustable ball mount is going to be a great option for pretty much any truck, as opposed to a fixed ball mount, where we would just have the correct rise and drop for one particular trailer. If we have multiple trailers or we're going to be towing a friend's trailer, pretty much any situation where we're going to be telling more than one trailer, you're really going to want to look into an adjustable ball mount. The reason why is it allows us to adjust the rise and drop here depending on our particular application at that time.

So what's really unique about the Gen-Y adjustable ball mount compared to just any other adjustable ball mount on the market is that we have these multiple stacked receivers.So the number of stacked receivers we're going to have is going to vary depending on which particular option we go with. But what's great about having multiple openings is, say, our truck was sitting a little bit higher and we could utilize one of these lower two openings here. We'd actually have a free one at the top here, and this can be used for a bike rack or a cargo carrier when we're really trying to load up the truck with as much things as possible to have to the campground. We want to hit the trails every now and then as well.So all of our Gen-Y ball mounts are going to be made of heavy duty steel construction. Now I'm sure right when you pick up the box, you're going to notice how heavy duty this thing is because I can be honest with you.

They're not light. However, this isn't a bad thing because you know you're getting a durable, well-made product. They're actually all made right here in the USA. And something else I really like about the Gen-Y ball mounts is we see the finish here. Now, this finish is super, super durable.

I've dropped these things multiple times. I've banged them into things and it really just doesn't come off. It has this nice hammered finish, which again, looks really well, helps blend in with the vehicle and holds up in due time.So we talked about the heavy duty steel construction. What plays into this is weight capacity. Pretty much, no matter what trailer we hook up, we're not going to have any issues with weight.

The two-inch hitch version is going to be rated from 10 to 16K depending on your particular model. We are going to get two hitch pin and clips that come with our kit here.If you're using it for a lunette ring, and you're going to be using the pencil lock, you're actually going to purchase an additional hitch pin because it's only going to come with two, but if you're just using it for a trailer in the standard application, you can see here, we're going to have all the hitch pins that we need. However, I highly highly recommend that you guys look into a locking hitch pin and clip so we can protect our ball mount from theft. We also have sets of these locking pins that we could have a key that is the same for the hitch as it is for the adjustable ball mount portion.So here's everything we're going to get with our ball mount. The first thing we're going to notice here is our stacked receivers. Now these are going to be available in a wide range of different rise and drops such as those that offer up to a five inch drop all the way down to a 15 inch drop. The number of stacked receivers is going to vary depending on how much drop we need. Now, in order to make sure you get the correct one for your particular trailer, or if you have multiple trailers, we need to take some measurements. The first measurement we'll be taking is from the ground to the top inside edge of the receiver tube. Then we'll have to come over to our trailer here. We first want to level our trailer using the tongue jack, and then we'll measure from the ground to the bottom edge of the coupler. Now, the difference in these two measurements, if the hitch on the vehicle is going to be higher than that on a trailer, we'll need a drop. Whereas if the hitch on the vehicle is going to be lower on the trailer, we'll meet a rise.So that's how you're going to be able to determine the correct rise/drop needs that you'll need to look for in ball mount. Keep in mind, we can get a little bit more than we think we need, because that will allow us to tow multiple trailers, but you also need to be careful that we don't go too long, because then you could run into ground clearance issues. So as we see now we have a good amount of space here but wouldn't really want to get any more of a drop because then we would actually run into issues with the stacked receivers, hitting the ground or bottoming out.So the other thing we're going to get with our kit here, we have this two ball mount that's integrated into one piece. Therefore, we're going to be able to tow trailers with a two-inch coupler or a 2 5/16 inch coupler, which will pretty much cover the vast variety of trailers that is on the market. Also in our kit here, we're going to get a pencil lock. So this is definitely going to be useful if we're towing any trailers, such as the agriculture or military trailers that have that lunette ring. We're going to be able to utilize and pull those trailers with everything here in our package. We don't need to purchase anything separately. And then lastly here, we're going to get two hitch pin and clips here, which are these standard 5/8 inch diameter.So now that we've shown you everything that comes with, let's go ahead and show you how to use it. We'll first start here by taking our stacked receiver and inserting it into the hitch on our vehicle. Now, as you'll notice, we have two hitch pin holes here, and this is really going to be for accommodating different trailers, different trailer hitches rather in regards to the pin hole depth. Now we're going to try to use the one closest to the end. That way we get as much of the shank inside the receiver tube as possible. Once we have that lined up, we'll take our hitch pin here, insert it through, and then follow that up with our clip.Now we're going to be using the measurements that we took earlier, so we can make sure that we install the hitch ball into the correct stacked receiver here. That way we can get the correct rise and drop and tow our trailer level. So once you determine this, you also want to make sure that we're using the appropriate size hitch ball. This trailer here has a two inch coupler, so we're going to be using the two inch hitch ball. We'll go ahead and insert the hitch ball assembly now, and again, lineup our holes and insert the pin through. Now we can lower our coupler onto the hitch ball. We'll then hook up our safety chains and our electrical connector, and now we're ready to hit the road.So in summary, the Gen-Y Adjustable Ball Mount is a really nice option for any truck. If you have a lifted truck, they're definitely going to be ideal for this due to the wide range of drops that they offer. Also, if you really trying to load up with as much gear as possible, it's going to be a perfect option for you because you have these extra accessory hitch holes. So we're really going to be well-equipped for pretty much any application, hit the road, hit the trails, hit the campsite. We're going to be able to load everything up here without having to worry about any additional adapters.And that'll do it today for our look and installation of the line of Gen-Y adjustable two ball mounts for two inch hitches..


Customer Reviews

Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 16K - 325-GH-515

Average Customer Rating:  4.9 out of 5 stars   (65 Customer Reviews)

Insert this heavy-duty mount into your 2" hitch to get 5 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, or other hitch-mounted accessory.

- 325-GH-515
by:

This item is so universal also a good deflector if you might get rear ended! Perfect fit for my 2013 Nissan Rogue. Thank you etrailer.com Very good Engineering... William



- 325-GH-515
by:

The hitch is one great heavy heavy duty unit! We have 2 trailers, each with a different size ball. With this unit we can quickly adjust for different trailer heights and ball sizes. definitely worth the money.



- 325-GH-515
by:

We live on an Island in SW Florida where everyone has some sort of Hitch, mostly for Boats. After Lugging this Beauty out to our 34ft Class A Motorhome, we installed our Tow Dolly and Double Bike Rack, and everything came together. The non-rattle screws worked great on the Bike Rack. The 10in Drop leveled the Dolly Tounge just right. We are off to be Full Time RVers, never to worry about Towing again... Thanks..



- 325-GH-515
by:

Great product -it fit my sons truck perfectly. Susan H. Was excellent to work with. She is a good customer service rep.



- 325-GH-515
by:

This thing is a beast, I knew it would be stout for the weight it's approved for but dang - very well made!



- 325-GH-515
by:



- 325-GH-515
by:



- 325-GH-515
by:

I have no complaints, works great. Max adjustment for different trailers and well made.



- 325-GH-514
by:

Review from a similar Versa-Ball Mount in Trailer Hitch Ball Mount


Has done what it is supposed to do. I have used the hitch to tow two boats over the last two years using both ball sizes. The only issue is the appearance. Saltwater creates rust and break down of the coating on the hitch. Was never dunked in salt has been effected being near saltwater. Hitch was washed with freshwater after each use in salt. I probably wouldn’t buy again. I have seen some other hitches that can do similar adjustments that do better near saltwater environments.


Comments
Thank you for your review! Black powder coated products to tend to take a beating when it comes to salt water environments. You should be able to use a stainless steel coated ball mount that will resist salt water much better. Attached is our ion of ball mounts that have similar characteristics to this one that you have been using.
-- Etrailer Expert Jon G - 03/31/2021


- 325-GH-314
by:

Review from a similar Versa-Ball Mount in Trailer Hitch Ball Mount


I've not towed with it yet, but it's very high quality and seems way overbuilt. I like the hammered finish and the components are very nice. Once I figured out how they work, Gen-Y's 'twisting lock pin' is easier to use than a standard cotter pin and adds some piece of mind that it's not going anywhere. Love that you can store the ball mount in front of the hitch when not using it - including sideways so that it doesn't reduce ground clearance, even when in the lowest receiver. The only thing I don't like about it - which etrailer comments on in the online item description - is that it doesn't fit very snug. Combined with the 2-1/2 to 2" reducer sleeve, there's a fair amount of play. Not sure yet if this is going to create rattling when towing (that would reduce my stars). One note: based on the Gen-Y website's method for determining the appropropriate drop for my vehicle, I should have ordered the 10" drop. I did my own measuring and ordered the 7-1/2" drop instead, which works perfectly for my 2021 RAM 3500 SRW 4x4.



- 325-GH-313
by:

Review from a similar Versa-Ball Mount in Trailer Hitch Ball Mount


The hitch is heavy and appears well-made. Paint finish is excellent. Two suggestions: the top weld could be smoothed a bit more. This is only an appearance matter, very minor. Second, hitch is supplied with two pins -- not locking. Please -- on a $250 item, the extra cost of furnishing locking pins must be small. Yet, I have locking pins already (for class III) which I assume will work fine for class Iv hardware. And any buyer can always order locking pins. I bought this to tow a U-Haul car trailer on an F150 with max tow package. Have not tried it yet.



- 325-GH-516
by:

Review from a similar Versa-Ball Mount in Trailer Hitch Ball Mount


Best hitch for the f650 that they have on the market



- 325-GH-316
by:

Review from a similar Versa-Ball Mount in Trailer Hitch Ball Mount


This ball mount is about as heavy duty as it gets. I needed it for the 12.5” drop not for so much for it’s 10K rating. The quality is outstanding, precision made. I’m sold on Gen-Y’s. I’d buy this again. eTrailer got this to me super fast which is a huge plus.



- 325-GH-314
by:

Review from a similar Versa-Ball Mount in Trailer Hitch Ball Mount


Haven't used the product but I have no doubt it will do the trick. I'm a over thinking, over prep kinda guy so...if I had any doubts this was the best option, I wouldn't have purchased it. etrailer...so...I'm pretty impressed with your sales/customer support. I received very quick responses to specific "will this work with this thing?" questions....and the answers were on target AND specific. No generalities, no sales pitch BS. If my idea wasn't the best...I got an alternative, along with part numbers, pictures etc. AND...I ordered this on a Thursday afternoon, and got the part delivered the next day. FREE Wasn't next day service...just happened that way. Pretty freakin nice.


Comments
Well, Im sure the product is ok but it becamse immediately apparent it would not work for my configuration. Pretty much a waste of $300 but that was a risk I took.
Renard - 05/18/2020


- 325-GH-514
by:

Review from a similar Versa-Ball Mount in Trailer Hitch Ball Mount


I purchased the gen-y mega duty 7.5 drop 2 inch shank 16k with the versa ball and couldn’t be any happier! This thing is perfect for my trailer and can’t wait to haul my dads trailer he has a 16 ft one. one hitch can do it all. Shipping was fast came in like 3 days.



- 325-GH-516
by:

Review from a similar Versa-Ball Mount in Trailer Hitch Ball Mount


Showed up on time. Needed a heavy duty hitch for my lifted super duty. Used for first time today and worked perfectly. My beaver tail landscape trailer has to towed level or it bottoms out. With this hitch no worries about towing level. Great product!



- 325-GH-516
by:

Review from a similar Versa-Ball Mount in Trailer Hitch Ball Mount




- 325-GH-316
by:

Review from a similar Versa-Ball Mount in Trailer Hitch Ball Mount


Bought this to pull my 34 ft camper behind a 2500 ram with a 8in lift work worked excellent no problem at all.



- 325-GH-214
by:

Review from a similar Versa-Ball Mount in Trailer Hitch Ball Mount


I love this hitch. It is exactly what I wanted for my new f150. It is beefy and I expect it to last a very long time. Etrailer.com was equally as amazing. I ordered the mount with 4 day shipping because we had a weekend at the lake planned with our boat. I ordered it around 5 pm. THEY SHIPPED IT AT MIDNIGHT. It arrived in 2 days. Just wow.



- 325-GH-514
by:

Review from a similar Versa-Ball Mount in Trailer Hitch Ball Mount


When reviewing my order confirmation I saw have had not ordered correct hitch. Called 800 # and Matthew answered and fixed my error in a matter of minutes. Thank you Matt!!



- 325-GH-514
by:

Review from a similar Versa-Ball Mount in Trailer Hitch Ball Mount


Exceptionally well made. Looks good on the truck Will allow me to use my existing weight distributing hitch on my new and higher truck.


Comments
Excellent this is a really good hitch I have used it to tow 10000 pounds with no problem.
Marcus R - 02/10/2020



- 325-GH-513
by:

Review from a similar Versa-Ball Mount in Trailer Hitch Ball Mount


The hitch is everything I wanted and couldn’t be more pleased how it performs! The only complaint I have is when I received the hitch is that the powder coat was chipped away in two spots and down to the bare metal. I contact etrailer and was told by one of there customer service reps that it’s a common occurrence and normal to receive a hitch with scuff and chips because of the way it’s stored in the warehouse, I just hope they can improve on this on the future. The product works awesome and I couldn’t be happier for how it looks and performs on towing the many different trailers I have!



- 325-GH-316
by:

Review from a similar Versa-Ball Mount in Trailer Hitch Ball Mount


Haven't used it yet but this thing is very well built. I moved away from a wrap around style drop down hitch to this, machined pockets for the ball, the wrap around style has too much movement with heavier loads. Shipping and price very good as well in my opinion.



- 325-GH-214
by:

Review from a similar Versa-Ball Mount in Trailer Hitch Ball Mount


Adding to the back of my Newmar Dutch Star to provide a 3 to 4 inch drop for my flat towing of a Ram 1500 with Blue Ox setup. A little disappointed that there is a little play in the connection to DS tow hitch, just a slight wiggle. Got a J-Pin, but Newmar hitch didn’t have 2 holes.May use the top holes for some sort of carrier ( bike or spare ). Didn’t have need for ball hitch, but maybe in the future. Infinite pins DID NOT work with this 16k ball mount - too short.



- 325-GH-315
by:

Review from a similar Versa-Ball Mount in Trailer Hitch Ball Mount


Well built and Heavy Duty. Just watch the apron inclines with the double ball down low, its a surprise jolt when it hits the ground.


30
70
Show More Reviews

Ask the Experts about this Gen-Y Hitch Trailer Hitch Ball Mount

  • Dual Hitch Adapter For Towing And Carrying Receiver Mounted Winch on Car Trailer
    I have a solution for you, but I wanted to first answer your main question and give you a little bit of information. You are correct that a rise/drop hitch like the Roadmaster Dual Hitch Receiver # RM-077-8 is only designed for flat towing and wouldn't be able to be used for this purpose. The problem with something like the Curt Dual Hitch Extender # D-192 is that using something like this reduces the total capacity of your hitch by 50%, so it would really put a dent in what you can safely...
    view full answer...
  • How to Carry Bike Rack and Flat Tow Vehicle with 10 INch Riser Adapter
    I do have a solution for you, however I do not recommend using the Roadmaster Dual Hitch Receiver # RM-077-10 in conjunction with the High-Low Adapter # RM-048-10 that you already have. Using an adapter with another adapter like this will cause a really unstable connection and essentially reduce the weight capacity of your RV's hitch to an unknown number. A better solution for what you are looking to do is with the Gen-Y Adjustable Ball Mount # 325-GH-515 (or for just the shank part...
    view full answer...
  • Weight Distribution System Drop Recommendation for Lifted Trucks
    For your weight distribution shank I recommend the Reese Weight Dist Shank - Drop Only - 11" Long # RP3344. This shank will give you a 7-5/8" drop using a trunnion-bar system or a 8-5/8" drop using a round bar system. If you have a round bar system, you can get a deeper drop of up to 9-1/2 inches with the Curt # C17124. These are the deepest drop shanks we carry based on the bar style of your system. If you need a deeper drop then you will need to use the Gen-Y stackable ball...
    view full answer...
  • Recommended Ball Mount Rated for 14,000 Pounds to Fit a 2 inch Trailer Hitch Receiver
    We do have Weigh Safe ball mounts that are rated for over 14,000 pounds, like part # WS6-25, but they're for 2-1/2 inch hitch receivers. For a high capacity 2 inch ball mount I recommend looking at a Gen-Y product like part # 325-GH-515. This particular one is rated up to 16,000 pounds and offers up to 10 inch drop or rise. It doesn't include a tongue weight scale, like some of the Weigh Safe ball mounts, but we do carry a scale, part # 5780.
    view full answer...

Do you have a question about this Trailer Hitch Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Cole B
Installed by:
Cole B
Employee Conner L
Installed by:
Conner L
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video by:
Chris R
Employee Alexander C
Written by:
Alexander C
Employee Mike S
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.