bing tracking image
  1. Trailer Hitch Ball Mount
  2. Gen-Y Hitch
  3. Fits 2 Inch Hitch
  4. Adjustable Ball Mount
  5. Drop - 10 Inch
  6. Rise - 10 Inch
Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 10K

Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 10K

Item # 325-GH-325
Our Price: $332.99
Trailer Hitch Ball Mount
Shipping Weight: 42 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Insert this heavy-duty mount into your 2" hitch to get 5 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 1,500 lbs. Great Prices for the best trailer hitch ball mount from Gen-Y Hitch. Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 10K part number 325-GH-325 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (238)
  • Q & A (0)
  • Photos

Gen-Y Hitch Trailer Hitch Ball Mount - 325-GH-325

  • Fits 2 Inch Hitch
  • Adjustable Ball Mount
  • Drop - 10 Inch
  • Rise - 10 Inch
  • 2 Inch Ball
  • 2-5/16 Inch Ball
  • Two Balls
  • 10000 lbs GTW
  • Class IV
  • Gen-Y Hitch
  • Built-In Pintle Hook
  • Stacked Receivers
  • Steel Shank - Gray
  • Steel Ball

Insert this heavy-duty mount into your 2" hitch to get 5 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 1,500 lbs.


Features:

  • Adjustable ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into hitch receiver on your vehicle
    • 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler
  • 5 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories
    • 2 Pins included to secure accessories to shank
  • Adjustable height lets you tow trailers of different heights with the same vehicle
    • Drop ball mount lower or raise it higher to match your application
  • Heavy-duty steel construction
  • Zinc primer and powder coat finishes resist corrosion
  • Hitch pin and clip or hitch lock for securing to hitch receiver sold separately
  • SAE J684 certified
  • Made in the USA


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Built-in receiver size: 2" x 2"
  • Maximum drop: 10"
  • Maximum rise: 10"
  • Gross towing weight: 10,000 lbs
  • Tongue weight: 1,500 lbs
  • Overall height: 13"
  • Total length with included ball mount installed: 11-5/8"
    • Total length without ball mount installed: 8-5/8"
  • Ball sizes: 2" and 2-5/16"
  • Hitch pin hole diameter: 5/8"
  • Accessory pin hole diameter: 5/8"


dimensional diagram

Multiple Stacked Receivers for Easy Adjustment

stacked receivers

This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 5 stacked receivers that sits along the vertical shank of the unit. This dual-ball mount lets you tow a trailer with a 2" ball coupler or a 2-5/16" ball coupler.


pintle hitch

Also included is a pintle lock, which can be inserted into the receiver directly above the ball mount to create a pintle hitch for hooking up a trailer with a lunette ring. Unlike other adjustable pintle hooks on the market, there are no nuts and bolts to remove and retorque when you change the positioning of this hitch. Just move the ball mount and pintle lock up or down to get the proper height and secure them in place with the included pins.


With the 5 stacked receivers, not only do you have the ability to adjust the height of the included ball mount, but you also have the ability to add various other hitch-mounted accessories. Insert a bike rack or cargo carrier. Mount a spare tire carrier. Use a tow bar to flat tow your vehicle. Or just add a fun hitch cover.


How to Measure Drop on Adjustable Ball Mount


GH-325 GenY Hitch Adjustable Versa Ball Mount with Pintle Lock for 2" Hitch Receivers - 10" Drop/Rise - 10,000 lbs





Customer Satisfaction Score:


Customer Reviews

Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 10K - 325-GH-325

Average Customer Rating:  4.8 out of 5 stars   (238 Customer Reviews)

Insert this heavy-duty mount into your 2" hitch to get 5 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 1,500 lbs.

by:

This is a really solid product. The craftsmanship is great and it is American made. I'll never need to purchase another hitch.

The service from Etrailer was also great. The product arrived ahead of schedule.

Td

4/9/2019

The hitch is still fantastic. Ive used it to tow a variety of trailers 1000s of miles combined. I also like the fact that I can use the stacked receivers as a hitch extension to carry bike racks and cargo baskets.



by:

Excellent product , we highly recommend exactly as shown and described and it is awesome.



by:

Fast



by:



by:

I wanted to be able to tow any trailer with a single hitch and that is why I purchased this model. Any size ball and pintle hitch all in one implement is great.... the drawback, this thing weights a lot. I don't like leaving the hitch on the truck if I'm not towing, but this thing is too heavy to move and I'm worried about this much weight bending the toolbox on the truck if I hit a bump.

For measurement purposes... This is a 2000 F-350 4x4 on stock 16" rims and tires and a CM flatbed. I got the 5" drop\rise model and it looks like it is going to be great. In case i need it, I added the 1 7/8" ball to the drawbar. When I can afford to get three matched key pins I will order them.



by:

Overall the hitch is heavy duty and solid. I have ready some reviews about the Pintle option and have used mine for the first time towing an empty trailer. It is showing some wear behind the ball where the wedge is welded. I will try it with a load and see how it holds up.
i hate to give a negative review but for the money it should not have that excessive amount of wear with it’s first use.
I have a curt hitch with the Pintle and it has worked perfectly. I was looking for something that had a better curb appeal with the Gen Y.



by:

Just received my new hitch and my first impressions is that this is a very stout hitch. The hitch is very heavy, so I won’t be taking it off and on much. I’ll leave the stacked receiver on the truck, I had a locking pin to secure it to the truck. I will store the 2-ball mount in the cab for now until I get some locking pins. Don’t want to become a victim of theft! When I obtain the locking pins, I will leave the balls attached. If you want a very stout adjustable hitch, I definitely recommend this Gen-Y hitch. Can’t wait to test it out on the road!



by:

best hitch I've owned. I have no doubt it will pull any of our equipment with no problem. odelelia was a big help and so nice when I ordered it a year ago.



by:

Heavy duty, strong and reliable. The black color on the ball scratched off fairly quickly, and the additional length of the hitch may keep some safety chains from reaching the vehicle. These are just things I noticed, but the quality of the hitch is tremendous.



by:

It’s heavy duty. I think it weighs as much as my equalizer hitch. I just got a new truck so we’ll see on a hitch height but on my old truck I wish I’d gotten the hitch with one height up so I had more adjustment and so it’s off hitting the ground. Oh well I tried guessing. I should of listened to the spirit. But a great heavy duty hitch.



by:

This is a very functional and versatile hitch. Incidentally, the extended horizontal length allows me to drop my tailgate and not hit my trailer jack. The only theoretical downside is the increased torque on the receiver because of the horizontal extension inherent with the hitch design, as well as the massive weight. these issues do not seem to be functionally relevant however. Pintle may come in handy someday. I would buy again.



by:

We love these hitches so much we’re replacing all we have in the fleet with the Gen-Y. Etrailer’s customer service is the reason we don’t shop anywhere else.



by:

It's a great hitch. Fits our needs. Only negative thing I can say is the paint/coating rubbed off almost immediately after putting it to use so there's a rust ring around it where it meets the receiver.



by:

Tow hitch is 100% expensive but towing my trailers has been so smooth it’s defiantly good quality and worth what you pay , defiantly recommend buying a $10-$20 lock so nobody steals it off your truck though!



by:

Another great purchase with etrailer. Fastest shipping and the same price as the lowest competitor.



by:

WOW. That is pretty much the word that sums it up. WOW. Not only because it weighs roughly 60 pounds, but she is pretty to look at to boot. Aside from that - the construction on this thing in a monster. Overbuilt by Hercules to pull down a mountain kind of over built. Exactly how we expect anything truck related to be. You do not want failure at any point, ever. This takes your drop hitch to a whole new level. I have owned B&W and Bulletproof before - and while there is nothing wrong with them - I do not think I will ever use another brand again. This is as good as they come.



by:

I used adjustable ball mount to haul a tow dolly and also carry a hitch haul with wood. It worked great.



by:

I just installed the Gen-Y and its way better than my last one (much more stout). I put it on a 2011 f350 with a leveling kit on 35s and Im defiantly glad that I got one with the 7 inch drop. Im also going to be putting it on a Kubota M-120 to pull a 12ft box scraper.



by:

Bought this product from etrailer and was amazed at the high level of customer service and knowledge. The product arrived ahead of schedule and was packaged well. This product is made well and I’m glad it’s a product of the USA.



by:

After two failed attempts and three weeks lost trying to buy same hitch on [online] n, same hitch from etrailer was ordered on Thursday and delivered on Saturday. Same hitch same price. The status updates were clear, uo to minute and never once saw a "lost in transit" once. `The hitch itself was a snug fit on my ram 2500 and I guess that's not a bad thing but its in and I have no doubts it will do the job.



by:

No doubt it's "mega duty". Thing weighs 54 lbs. I don't know if its worth the money but I'd say its probably the best hitch you could get!



by:

So far it’s worked great. I have several different style trailers I pull daily and it’s great that I don’t have to change out hitches every time I have to pull a different trailer.



by:

Great unit



by:

Heavy duty, high quality, delivered on time as promised. Thanks e-trailer.



by:

Great receiver
The drop was perfect for
motorhome to tow our car. I have 13,000 miles of towing with it and not one issue.
Would definitely buy it again.


25
236
Show More Reviews

See what our Experts say about this Gen-Y Hitch Trailer Hitch Ball Mount

  • 10 Rise Adapter Needed to Tow 3,500 lb Pintle Hook Trailer
    We have exactly what you are looking for! Gen-Y has a stacked receiver design that is built around heavy-duty applications like what you are looking to do. For a 10" rise that will match up with your 3,500 lb pintle hook trailer we have part # 325-GH-315 which comes with a 2" and a 2-5/16" dual hitch ball (just replace it with your pintle hook) or part # 325-GH-325 which is the same thing except it has the pintle hook attachment. Both of these are rated for 10K towing and 1.5K tongue weight...
    view full answer...
    Image 1 for
  • Is There A Replacement Receiver For Item # 325-GH-325
    Yes, you absolutely can. You would want the Replacement Shank for Gen-Y Adjustable Ball Mount - 2" Hitch - 10" Drop/Rise - 10K Item # 325-GH-305
    view full answer...
  • Recommended Rise/Drop Adapter for Use with Weight Distribution System
    The Gen-Y Adjustable 2-Ball Mount # 325-GH-325 is the perfect solution for vehicle and trailer combinations that require a rise or drop. The Gen-Y will install in the 2" hitch receiver on your 2004 Ford Excursion and allow you to connect your trailer with weight distribution hitch attached to ensure that you're always towing with a level setup. The Gen-Y adjustable ball mounts are fully compatible with weight distribution systems.
    view full answer...
  • Recommended Adjustable Ball Mount For My 2018 Ford F-150 With Rock Tamers
    I am a fan of the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 10K, part # 325-GH-325. It comes with up to 10" of rise or drop with five heights to chose from. It comes with a 2" and a 2-5/16" ball. It is coated with zinc primer to resist rust and corrosion. It is compatible with your Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2" Hitches - Matte Black, part # ERT00108. I have included a product description link and video review links below.
    view full answer...
  • Can the Gen-Y 10 Adjustable 2-Ball Mount Be Used for Towing and a Hitch Carrier
    The Gen-Y Adjustable 2-Ball Mount part # 325-GH-325 can be used for both towing and hitch mounted accessories at the same time. That said, the ball mount would likely need to be in one of the bottom two holes with the hitch mounted accessory in the top. In regards to weight, it has a very high 1,500 lb rating so as long as the tongue weight of the trailer and weight of the hitch mounted accessory are below this you will be fine. It's built like a tank so you should not have any concerns...
    view full answer...
  • Recommended Ball Mount for Towing a Trailer and Hauling a Bike Rack
    Trailer's couplers and hitch balls are considered level when they are within 2"-3" of height. You are correct the Curt Multipurpose Ball Mount item # D210 will drop down 2-1/4" and put the top of the item # A-90 hitch ball right at 17-3/4". This set up may work but I wouldn't recommend it. You will want your trailer as level as possible and this will have your nose down quite a bit. All of the multipurpose mounts have the same 2-1/4" drop. Instead you will want to use the Gen-Y Adjustable...
    view full answer...
  • Can I Carry Two 60 Lbs E-Bikes On A Travel Trailer With A Bumper Mounted Bike Rack
    I have a solution for you. You can use something like the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs, part # D210. This can work for you if you are not using a weight distribution hitch. If you are using a weight distribution hitch, something like the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 10K, part # 325-GH-325, could work for you. You will need to make sure that adding the e-bikes will not make...
    view full answer...
  • Recommended Ball Mount with Long Shank and 10 Inch Drop with 2 Hitch Balls
    The Flash Solid Steel Adjustable 2-Ball Mount - 2" Hitch - 10" Drop, 11" Rise - 12K # FA49-00-5900 you mentioned has a distance from the center of the hitch pin hole to the center of the hitch ball of 9 inches so part of your coupler would still be under your rear bumper. My recommendation for you is the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 10K # 325-GH-325. This ball mount has a measurement from the center of the hitch pin hole to the center...
    view full answer...

Do you have a question about this Trailer Hitch Ball Mount?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Michael B
Installed by:
Michael B
Employee Aidan B
Installed by:
Aidan B
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Manda E
Updated by:
Manda E
Employee Alexander C
Written by:
Alexander C
Employee Conner L
Video by:
Conner L
Employee Thomas T
Video by:
Thomas T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.