Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Ball mount features 3 permanently attached hitch balls to fit different applications. Tow up to 2,000 lbs with the 1-7/8" ball; 6,000 lbs with the 2" ball; or 10,000 lbs with the 2-5/16" ball. Hitch pin and clip sold separately.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com and today we're gonna take a look at this Flint Hill Goods Tri Ball Mount for two inch hitches. This ball mount features three different size chrome plated, permanently attached hitch balls, letting you tow trailers with different coupler sizes. To switch the ball, you're gonna simply remove, rotate, and re-insert the shank. And this solid shank is extra strong and durable, and it will slide into your two inch trailer hitch receiver. And so, just some specifications here so you're aware of the capabilities of this unit.
When you use the one in seven eights inch hitch ball, the gross towing weight is going to be 2000 pounds and the ton weight is going to be 200 pounds. And I took some measurements earlier before our time together. From the center of our hitch ball to the center of our hitch pin hole, we are sitting right at eight inches. And then the distance from the center of the hitch pin hole to the end of the shank, we're sitting right at two and a half inches. And then when we switch to the two inch ball right here, the gross towing weight is going to be 6,000 pounds with the ton weight of 600 pounds.
And then the distance from the center of our hitch ball to the center of our hitch pin hole will be the same at eight inches. And then again, the distance from the center of the hitch pin hole to the end of the shank is going to be two and a half inches. And then finally switching to the two and five sixteens inch hitch ball, the gross towing weight is going to be 10,000 pounds with a ton weight of 1000 pounds. And then the distance from the center of our hitch ball to the center of our hitch pin hole is going to be six and three quarters inches. And then the distance from the center of the hitch pin hole to the end of our shank, we're gonna be sitting right at three and three quarters inches.
Of course, you wanna make sure that you do not exceed the rating of the lowest rated component in the vehicle or trailer towing setup. The overall length from end of shank to end of shank, we're sitting right at 12 inches. So again, this is of a durable steel construction. It has a black powder coat finish that's going to help resist corrosion. And the hitch pin and clip or hitch lock is sold separately.
So if you don't have a compatible pin and clip, I am including an option there for you on your screen. However, I would recommend going, I would recommend considering the etrailer trailer hitch receiver lock for two inch hitches, that's going to secure this to your vehicle and deter theft. So whichever one you choose to go with, either the pin and clip or the trailer hitch lock, I have those item numbers for you. On your screen, just take the item number of the one that you're considering, put it in the search field of our website, and it will take you to that particular item. This also does include a brief instruction manual. And that's going to conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
Average Customer Rating: 4.9 out of 5 stars (35 Customer Reviews)
Ball mount features 3 permanently attached hitch balls to fit different applications. Tow up to 2,000 lbs with the 1-7/8" ball; 6,000 lbs with the 2" ball; or 10,000 lbs with the 2-5/16" ball. Hitch pin and clip sold separately.Overall my experience was excellent. The videos helped me fit the hitch and wiring. The job was done in less than an hour. I recommend looking at videos and keeping them close especially during wiring. Not difficult but get details right first time to avoid going back!
One caveat with this. I wish it was in bold letters that hitch pin does not come with the three mounted ball. I put the whole thing together and because I did not buy the hitch pin( thought it came with three ball mount) I could not use the hitch straightaway. You would think they should add small amount of money to ball mount and throw in hitch pin in the box!!!!
Product delivered in great condition, I have already installed it on my GMC pickup.No problem with the installation, everything fit perfectly. I wish I had ordered a 2" drop mount with a 2" ball instead of the straight tri-ball mount. My main purpose will be pulling a 17.5' Pro-Crappie fishing boat, this should make that alot smoother since I got the ball off of my bumper. Very pleased with the product and service.
Thanks, Richard
Top quality, never have to worry if I have the correct size ball in the truck. Solid product - great welds on the ball mount.
Very high quality, and this ball mount does the pin holes in the correct spots. Closest to the ball when using the 2 5/16" (heaviest trailer) and a little further away for the other two (lighter trailers). Definitely helps with control. The mount is also very well made, fit and finish are excellent.
So glad to have finally found a solid shank triball hitch! So hard to find a solid shank...and specifically with the larger ball on the top.
This product from etrailer is excellent and the price was very competitive. I would recommend this without hesitation.
Paul M.
10/25/2017
I like the product. Thanks.
The tow ball has worked very well, gives me the option to tow a couple of sized trailers..
Great three ball hitch with solid bar.
Just a handy hitch to have in the farm trucks. Works well as a hammer too in a time of need.
Superior Customer Service, Excellent selection, Competitive Pricing and timely shipping. VERY pleased with my purchases and value for the dollar. Lots of options out there for the products BUT CUSTOMER SERVICE is what offers the true value.
Great product, but made in China. I paid more for this one believing it to be made in the US.
Heather A.
10/26/2018
The only tri-ball option I would recommend that I can guarantee is made in the USA is B&W part # BWBMTT31004. It is a tri-ball ball mount part but does not feature the chrome balls.
Helpful Links
Love etrailer, great service, fast ship ping!
Great for Ice Castle and boat in one un it
great heavy duty construction just what I was looking for
Good product. no issues with it, use it often.
Simple and effective. If you plan on driving on rough roads this may not be the best idea.
Great product, as described. Speedy delivery with free shipping too!
HEAVY! nice and solid works as intended
Received my hitch as advertised and in a reasonable time
Excellent service and great product!!!! Will do business again!!
Solid as can be! Very nice product.
Just what I expected!
Product was as advertised.
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jp
9/13/2016
All the products are fabulous!! Thanks for following up with me. They are in use regularly.