Flash Silent Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 4" Drop, 5" Rise
(236 reviews)
Price: $260.00
In Stock
Flash Silent Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 4" Drop, 5" Rise
Item # DTSTBM6400
Retail:$310.72
Our Price: $260.00
You Save: $50.72
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (236)
- Q & A (0)
- Videos (1)
- Photos
Fastway Trailer Hitch Ball Mount - DTSTBM6400
- Fits 2 Inch Hitch
- Adjustable Ball Mount
- Drop - 4 Inch
- Rise - 5 Inch
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- 10000 lbs GTW
- Class IV
- Fastway
- Anti-Rattle Shank
- Aluminum Shank - Silver
- Steel Ball
Self-contained locking pins in this lightweight hitch deter theft and eliminate rattle. Go from a 4" drop to a 5" rise to swap between trailers. Tow up to 8,000 lbs with the 2" ball and up to 10,000 lbs with the 2-5/16" ball.
Features:
- Adjustable ball mount makes it easy for you to haul different trailers
- Ball height adjusts in increments of 1" so that you can easily switch between trailers with different tongue heights
- Reversible ball platform lets you swap between 2 different-size balls
- Self-tensioning, anti-rattle Silent Tow system tightens ball mount inside receiver tube and secures ball platform to ball mount
- Stops rattle and clunk
- Uses internal, stainless steel bolts for long life
- Adjusts with Allen wrench (included)
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- Solid aluminum produces a lightweight yet strong ball mount
- 2 Chrome-plated steel hitch balls included
- Made in the USA
Specs:
- Fits: 2" x 2" trailer hitch receivers
- Ball diameters: 2" and 2-5/16"
- Towing capacity:
- 2" Ball: 8,000 lbs
- 2-5/16" Ball: 10,000 lbs
- Tongue weight capacity: up to 1,000 lbs
- Maximum rise: 5" from the top of the hitch receiver opening
- Maximum drop: 4" from the top of the hitch receiver opening
- Distance from center of hitch pin hole to back of upright bar: 4-1/4"
- Distance from center of hitch pin hole to center of ball: 8-1/2"
- 1-Year limited warranty
This Fastway Silent adjustable ball mount provides solid, rattle-free towing performance. A stainless steel pin, operated by the included hex tool, extends out from the shank and tightens the ball mount in your receiver.
To further eliminate any movement, a bolt in the side of the ball platform tightens the connection between the platform and the adjustment shank. As a result, you'll enjoy a quiet, rattle-free towing experience.
The ball platform is connected to the adjustment shank by the hex bolt located in the front of the platform. To change the ball height, simply loosen both the bolt in the front and the bolt in the side of the platform with the included tool. This will release the ball platform and allow you to slide it up and down. Or, you can slide the platform off and reverse it to change the ball size.
47-00-3400 Flash 4" Silent Tow 2" Shank 2" and 2-5/16" Chromed Balls
DT-STBM6400 Fastway (Diversi-Tech) Flash STBM Series Solid-Tow Ball Mount - 4" Drop, 5" Rise Adjustable Hitch - Solid Billet Aluminum
Video of Flash Silent Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 4" Drop, 5" Rise
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Fastway Adjustable 2-Ball Mount Review
Hey everyone, it's Eve Angeline here at etrailer and today we're gonna be taking a look at our Fastway Adjustable Ball Mount. This has a chrome or stainless steel ball option and we'll take a look at its features here at etrailer.com. So this is a unique design of a ball mount because it has an anti-rattle feature. Now, when you hear anti-rattle, you usually think threaded hitch pin securing the ball mount itself. But this also has anti-rattle for the hitch balls. So you get your normal features like the two ball sizes is adjustable up and down for rise and drop.
But using an Allen key, you can tighten things down further to reduce the chucking when you're towing things around. You can get this in a 2 or 2 1/2-inch receiver size. This has a solid aluminum shank construction. This ball mount is reversible, so you have a two hitch balls, one on each side. So the 2-inch has an 8,000-pound capacity.
The other ball is gonna be a 2 5/16 hitch ball with a 10,000-pound capacity. So I currently have the smallest one, which has the 4-inch drop. We can get this in a 6, 8, or 10-inch drop. And to measure for how much drop or rise you need, check out our product description. We have a nice little graph there to explain it, but I measure from the top-inside edge of our hitch receiver to the ground and then you compare that to your coupler height.
And then that will help you figure out how much rise and drops you actually need. Whichever option you do get, they are pretty lightweight for a ball mount because those are usually extremely heavy. You might also wonder, is it as easy for people to just grab it and go Well, you do have a little bit of a security function here. See that bolt head Well, it's the design we use with the specific Allen key that comes with the ball mount. So unless they have that specific key, they cannot remove the hitch balls.
Overall, this ball mount is solid. So the shank portion, that's all a solid construction, and you don't have to worry about welds breaking. And then you have internal stainless steel bolts adding to that durability. And with it being made of aluminum with a corrosion resistance, you don't have to worry about it just rusting apart when it's outside. Now this does have a little bit of movement though when it comes to the up and down, but that can also depend on your hitch receiver. So let's take a quick look at some reasons why you might have some movement and then take it out onto the test course. This utilizes a bolt that wedges in your hitch receiver. Now for some trucks, they notice that it doesn't go all the way inside. So measuring from where that bolt comes up to the center of your hitch pinhole, that's gonna be 2 inches away. And also, make sure you get the matching shank for your hitch receiver as well as the matching hitch pin. So if you have a 2 1/2-inch receiver, don't get an adapter to use with a 2-inch. Go ahead, get the 2 1/2-inch shank, and then use the correct hitch pin. That may help reduce chucking or movement from side to side. So Fastway uses their patented anti-rattle where it tightens down the hitch balls as well as the ball mount. You did see some of my struggles there with the side-to-side movement, but I'm still really appreciative of the up and down anti-rattle. Because if I'm driving around with this on, I'd like it not to rattle around as much. So to install this is actually really easy because it's so light. Compared to a lot of the other ball mounts I have to install, this is a breeze. So just get your ball mounts, get the shank into your hitch receiver, line up the holes. I'm using my own standard ball mount pin, so it's a 5/8 pin with a 3/4-inch span. I have a hitch pin clip for the end. Before you put the hitch balls on, first, tighten down the shank. So notice without it tightened down, (shank clanging) how much movement there is inside the hitch receiver Get your included Allen key tool and tighten that. I grabbed another shank to show you what it's doing inside of your hitch receiver. As you tighten down that bolt, this pops up and wedges your shank to your receiver. Once the shank is secured, you can then attach your hitch balls. So I have the two options here. The stainless steel as well as the chrome finish, they work the exact same way, just a different finish for the balls. So we're gonna get the stainless steel and line it up with whichever rise or drop we want. You have these holes with one-inch incremental spacing, so you can go for either a four-inch rise or a five-inch drop. So get your bolts kind of flush up against the hitch ball, pick which height you want it to go at, and then tighten it down. Notice how much movement we have with our hitch ball This is the normal amount of movement you'll get with a pin and clip situation on other ball mounts. We're gonna fully tighten this down and to compare, there's no up and down movement. Finally, access the safety lock screw and tighten that down too. Every time you make an adjustment, please engage this. And just like that, you're able to install your ball mount. So there's three things I'd like you to remember. The first is I'm using my own hitch pin and clip. You can also get a Fastway locking hitch pin and clip here at etrailer if you want it to match, and if you wanna keep this safe. The second thing is do not lose your Allen key tool because this has a hole out inside of it which makes it a security tool. And when you use it, for the third thing, is make sure to hold onto that ball mount as you loosen it or else, it can drop off real quick. So hopefully this video helped you out with seeing if this is the right fit for you whatever you're towing as well as your vehicle. You do have those different options when it comes to size as well as finish. So make sure to check out our product pages here at etrailer where we have the descriptions, the pictures, and the videos to help you out. And now, here's a look at the Fastway Adjustable Ball Mount here at etrailer. My name's Eve Angeline and I hope you enjoyed the journey.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Flash Silent Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 4" Drop, 5" Rise - DTSTBM6400
Average Customer Rating: 4.8 out of 5 stars (236 Customer Reviews)
Self-contained locking pins in this lightweight hitch deter theft and eliminate rattle. Go from a 4" drop to a 5" rise to swap between trailers. Tow up to 8,000 lbs with the 2" ball and up to 10,000 lbs with the 2-5/16" ball.by: Ken K10/01/2019
It is difficult to find an adjustable, quality receiver hitch that also provides a way to secure BOTH the shank and the ball assembly to the vehicle against theft.
The FastWay unit’s use of a secure Allen screw is certainly not ‘Fort Knox’ safe, but is more than its competitors have.
I took advantage of a “used” unit etrailer listed and was very pleased upon receiving it that it was like new with only some minor scratches- just as described.
by: James 09/24/2021
I initially loved the hitch because it was tight in receiver and unlikely to be stolen. Over time it has become harder to keep the anti rattle screw and pin tight, I tighten it just about everyday now. There are also rough spots that have developed in all the screws, I suppose from the set screw tightening against the threads. The hitch is a good value for the money, as it does its job of being an adjustable hitch.
by: TK K.08/04/2013
It took a bit of time to get here, (manufacturing happens) but this product was well worth the wait. The excellent design uses a lot of smart options to allow me to pull my current small load pop up trailer, while providing me the flexibility to shop around for a new travel trailer. (I mean, who want's to sleep in a pop up trailer in Montana's bear country?) I especially like the "no rattle and clunk" adjustment on this ball hitch. The rutted and washboard roads that I travel aren't for the weak of heart, and not having to listen to the ball hitch squeak and complain was an unexpected benefit.
by: David A.03/10/2016
I needed a hitch for 2 trailers. Found this hitch at Etrailer.com, great price and great service. The anti-rattle feature works great.
I will shop Etrailer.com again. Thanx.
by: Scott 03/03/2021
This hitch is exactly what I was looking for. Extremely well made, adjustable and adaptable to the 4 different trailers that I have pulled using this and rattle free. It is worth every penny that I paid.
by: Chris C.07/08/2016
Nice hitch. I have been using it for 1 year now with no issues. I pull a 7,500 lb boat with it and it works great. Nice looking hitch as well.
by: Garr10/02/2019
This adjustable ball mount is perfect for my needs. I use it to tow different trailers and this adjusts easily and looks like a piece of artwork! etrailer was helpful in helping me select the correct one for my needs.
by: Danjo6102/06/2017
Love the versatility of both sizes. Use it for towing my cargo trailer and my boat. Excellent purchase - review is after 1 year of use.
by: Gus A.07/08/2013
Excellent workmanship, works as stated, no noise an solid, Level adjustment marks aids in aligning the support bolt .
Gus A.
7/17/2014
Works Great still , recommend ,great workmanship,
by: Scott L06/12/2016
Exactly as described, very fast shipping. Recommended for anyone looking for an adjustable height ball
by: DG Racing #21807/09/2015
Solid hitch. The anti-rattle mechanism is genius. I would buy this again if I needed to.
by: Paul11/26/2012
Very solid ball mount. The anti-rattle screw is awesome, no more noise going over bumps on the road. E-trailer sent e-mails and shipped the very same day. Great service!
by: Mike b03/31/2015
The anti rattle feature is nice
by: josh D10/16/2014
Great shipping time...very good product so far very tough
by: john w03/17/2016
just as described with very nice polished finish.
by: Walter02/18/2018
Great product. Fast shipping.
by: James 10/11/2023
by: John04/23/2023
by: Kevin08/12/2023
I am very impressed with the overall fit and finish of the ball mount. After tightening everything down per the instructions, the mount doesn’t move at all in the receiver and it maintains a true 90 degree vertical orientation in relation to the ground. I have towed both a boat and fully loaded utility trailer with it and have sensed no movement at all of the ball mount in the receiver and it’s as solid after towing as it was beforehand. My only recommendation would be to have the option of inserting a lockable hitch pin through the 2 ball mount instead of just the custom allen-type screw.
by: Barry02/13/2023
3500 Ram 2.5" Receiver - the pin that is to rise up to reduce up-down chucking is not 100% inside of the receiver. I wonder if that will be an issue over time. Why NO side to side set screws to reduce that chucking? An improvement to the design would be to offer single balls or sets instead of having lower ball get damaged. And how long before the set-screw through the ball wears and chucking happens at that stress point? When I lose the special allen wrench is there a place to get a replacement for a few $ that's open at 11pm on a Sunday night? BUT it is bright and shinny out of the box - so there is that!
by: DonM02/18/2023
Less than half the weight of similar steel products and just as strong. The anti-rattle feature is awesome, works great. The optional locking pin needed a 1/16" rubber washer to keep it from rattling. Overal VERY pleased! Highly recommended!
by: Andy08/28/2023
Very solid hitch. I like all the adjustments and safety bolts. I can't believe they only included one of the special hex wrenches. If you install this thing and loose that hex wrench, then it is not coming off until you get another one. I went to their website looking to buy it from them, but they don't sell it. I finally found the right size on [online]. $XX bucks for one 5/16" tamper resistant hex wrench. It was p/n Eklind 90220 if you want to get one.
by: Gordon S02/18/2017
Needing at least an 8" drop I ordered the 10" drop to be sure I had enough leeway for adjustment in case my vehicle was heavily loaded with gear. The anti-rattle feature is what really made me choose this hitch. I'll be towing a boat 7,000 miles this summer and did not want to hear any squeaks and eliminate anything that could contribute to trailer swaying. In order to be sure the anti-rattle pin would make contact with my receiver I inquired with both the manufacturer and etrailer. Fastway customer rep said the distance was 3-1/2" and Etrailer said it was 2". Needless to say when it arrived it measured 2" which is perfect for my 2016 Suburban. You may want to double check with etrailer on the 2" measurement before ordering in case the manufacturer has modified the design.
While the anti-rattle pin does eliminate up and down motion a little left to right movement remains. I may fabricate a narrow shim to eliminate all movement but at this time I do not think it will be necessary.
Since I am using this on what is almost the lowest height setting with the 2" ball the 2-5/8" ball is just 10 1/4" above the ground. The hitch balls are not removable from the sliding mount therefore you either have to be careful not to bottom out or for more clearance Fastway said I could cut the 2-5/8" ball off the mount. This would make the ground clearance 12-1/4" off the ground.
As others have stated it is a beautiful piece of hardware and looks really sharp. I will likely leave on on permanently with a BOLT trailer hitch receiver lock. (Be sure to order the correct one!). Leaving it permanently mounted has one benefit- I think drivers from behind will be more wary of stopping too close and rear ending you and if they do rear end you at a slow speed it will absorb a bit of the impact thereby minimizing damage to your vehicle. Thank you etrailer.com for such excellent service and I highly recommend them for your hitch needs.
by: Raymond06/13/2018
Excellent product. I installed on my 2014 Ram 1500 and the anti rattle pin was completely inside the receiver unlike what some of the other reviews show. There is absolutely no rattling. I believe the part number is diversitech, but this is in fact a fastway flash ballmount. As always, quick shipping from etrailer and the best price I've seen anywhere.
by: William 05/31/2023
The mount exceeded my expectations in fit, finish and ease of use. I especially like the anti-rattle mechanism built into the head of the mount. I went through and inspected all of the internal pieces/screws and applied anti-seize for insurance although it appeared that this might have already been done when assembled. Time will tell on the durability of the mount but from outward appearances that won’t be a problem. One suggestion would be to include or at least offer the option of ordering a second security key. I also ordered the etrailer hitch lock which is a lot better and is far easier to operate than any of my previous locks. I would definitely reorder both if I had to replace them.
25
236
Show More Reviews
See what our Experts say about this Fastway Trailer Hitch Ball Mount
- Troubleshooting Fastway Solid-Tow Adjustable Ball Mount That Still Has Movement Once InstalledThe Solid-Tow Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 4" Drop, 5" Rise # DTSTBM6400 you purchased is designed for a 2" trailer hitch receiver which is more than likely what you have on your 2017 Honda Pilot so I do not think you purchased the wrong model. To make sure that the # DTSTBM6400 is secure to the trailer hitch receiver you will want to tighten the top Allen screw until there ball mount is secure. There should not be any that pops up or makes any noise when installing....
view full answer... - Fastway Solid-Tow 2-Ball Mount Rise and Drop Towing CapacityYes, the weight rating is the same in both the rise and drop configuration. The # DTSTBM6400-2S Solid-Tow Adjustable 2-Ball Mount w Stainless Balls - 2" Hitch - 4" Drop, 5" Rise has a tongue weight capacity of 1,000 lbs. The 2" ball has a towing capacity of 8,000 lbs and the 2-5/16" ball has a 10,000 lbs towing capacity. I have attached a video review for your reference.
view full answer... - Should Receiver Tension Pin be Engaged with Solid-Tow Adjustable 2-Ball Mount in Rise PositionAccording to the instruction manual of the Solid-Tow Adjustable 2-Ball Mount # DTSTBM6400-2S, "If the drop bar is in the UP or RISE position DO NOT engage the receiver tension pin" so you would only use the actual tension pin if it is in the drop position.
view full answer...
- Dimensions of the Solid-Tow Adjustable 2-Ball Mount Part # DTSTBM6400-2SI went out to our warehouse and measured the Solid-Tow Adjustable 2-Ball Mount part # DTSTBM6400-2S for you. The distance from the center of the hitch pin hole to the center of the stainless steel pin is 1-3/4". I have attached a photo of this measurement for you as well.
view full answer...
- Allen Hex Tool Included With Solid-Tow Adjustable Ball MountsYes the 5/16" Allen Hex Tool for Fastway and Diversi-Tech Solid-Tow Adjustable Ball Mounts # DTBM26 that is included with the Solid-Tow Adjustable 2-Ball Mount w Stainless Balls # DTSTBM6400-2S does have the recess for the tamper proof adjustment bolts.
view full answer... - Availability of Locking Anti-Rattle Diversi-Tech Adjustable BallmountDue to the fact that the shank that slides into the receiver prevents the ball from being raised (with ballmount in drop position) or lowered (in rise position) far enough for the ball to have a zero rise or drop. This honestly isn't a problem. As long as you can get the trailer within an inch or two of level, it's considered close enough. You are correct. It's not possible to get a Diversi-Tech locking anti-rattle ballmount because the anti-rattle feature sits right where the locking...
view full answer... - Minimum Tongue Weight for Shock Absorption of Gen-Y Ball Mount to WorkIt is correct that for each of the Gen-Y Torsion 2-Ball Mounts that we carry, such as # 325-GH-1224, the minimum tongue weight needs to be 1,200 lbs. Unfortunately there isn't a ball mount with shock absorption which will work for your tongue weight, but I do recommend checking out the Solid-Tow Adjustable 2-Ball Mount # DTSTBM6400. This uses a self-tensioning, anti-rattle system to stop rattling and movement in the hitch of your 2017 Ford F-250. It has a 4" drop or 5" rise and comes with...
view full answer... - Diversi Tech Adjustable Ball Mount Recommendation for a 2006 Ford VanThe most popular ball mount for the Curt Hitch # 14055 is the B&W Ball Mount # BWBMHD30010 which has a distance of 8-1/2 inches from the center of the hitch pin hole to the center of the ball hole. While the Diversi-Tech Adjustable Ball Mount # DTSTBM6400 has the same distance of 8-1/2 inches. Based on that you should have no problem using a # DTSTBM6400.
view full answer... - Replacement Interchangeable Hitch Ball Set with 1-7/8 inch, 2 inch, and 2-5/16 inch Hitch BallsWe have a few different interchangeable hitch ball sets that fit the description that you gave of have a 1-7/8 inch, 2 inch, and 2-5/16 inch hitch balls and they are: Tow Ready Interchangeable Hitch Ball Set - # 63803 Convert-A-Ball Interchangeable Ball Set - # 105TB The Tow Ready and Convert-A-Ball sets have 1 inch shanks while the Fastway and Diversi-Tech option fits to their specific ball mounts, like part # DTSTBM6400.
view full answer... - Recommended Ball Mount With Minimum 7-1/2 inch LengthI recommend the Curt Class III Ballmount with 2 inch Ball, # C45036, for your application. This ball mount will meet all of the parameters in your owners manual. It's two inch drop fits within the parameters and it is 7-1/2 inches from the center of the pin hole to the center of the hitch ball. Unfortunately there are no adjustable ball mounts that meet Mercedes Benz requirements for your vehicle. To give you a mount that takes the clunk you mentioned away, I recommend the Anti-Rattle...
view full answer... - Will the Gen-Y 3-Ball Mount Do Well in Salt Water for Boat TrailerWhen choosing a ball mount for salt water applications the best choice for corrosion resistance is going to be aluminum. Since we do not have an aluminum fixed 3-ball mount, the Gen-Y 3-Ball Mount for 2" Hitch Receivers - 2-5/16", 2", 1-7/8" Balls is a good choice. The 1-7/8" ball is removable, and zinc hardware is used to secure it. This ball mount has a zinc primer and epoxy powder coat to resist corrosion. This will inevitably wear down over time, but proper maintenance can help to...
view full answer... - Comparing BulletProof Hitches Adjustable 2-Ball Mount to Curt Channel Style Adjustable BallmountStarting with the most significant difference here, the BulletProof Hitches Adjustable 2-Ball Mount # MD204 has a different rise/drop when compared to the Curt # C45900. The # MD204 has a 4" drop and a 4" rise while the # C45900 has a 6" drop and 5" rise. It is important to have the right options for rise and drop for your 2020 Ford F-150. To choose a ball mount with the correct rise and drop, you'll first need to take two measurements: your hitch height and coupler height. The difference...
view full answer... - Adjustable Ball Mount with 2 Balls that are NOT ChromeThe B&W adjustable ball mounts all use chrome balls. Fastway has ball mount # DTSTBM6400-2S with stainless steel balls. Stainless steel doesn't have the wear problems that chrome does but it does cost more. We also have # AM3461 that has the greaseless capped balls though the rest of the balls are chrome.
view full answer... - Will Flash Silent 2-Ball Mount Clear GMC MultiPro Tailgate With Mount RemovedWhile it's likely, I can't guarantee removing the mount of the Flash Silent 2-Ball Mount w/ Stainless Balls - 2" Hitch - 4" Drop, 5" Rise # DTSTBM6400-2S will allow you to open the GMC MultiPro tailgate. We haven't tested it and there are no customer reviews talking about this. So I think it will as removing the mount would seem to eliminate interference, but if you want a guaranteed ball mount that will work with the MultiPro, a very similar option is the B&W Tow & Stow 2-Ball Mount -...
view full answer... - Best Trailer Hitch Receiver and Ball Mount To Eliminate Rattle For a 2007 Toyota HighlanderI recommend the etrailer Trailer Hitch Receiver # e98857 for your 2007 Toyota Highlander. This receiver has a solid steel construction with precision, robotic welding to eliminate the chance of rattle when going over bumps. It uses a matte black finish to give it a factory appearance and it is made in the USA. When using a Solid-Tow Adjustable 2-Ball Mount w Stainless Balls # DTSTBM6400-2S removes any play from the receiver to the hitch ball to prevent rattle. It is constructed of Solid...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jeff D
Updated by:
Lindsey S
Updated by:
Laura H
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Mike S
Updated by:
Ryan F
Written by:
Raymond P
Video Edited:
Dustin K
Video Edited:
Chris R
Installed by:
Randy B
Installed by:
Evangeline M
Video by:
Zach D
Video by:
Charles A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ken K.
3/18/2021
UPDATE: After about a year and a half I have hadthe following experiences. The manufacturer replaced the hitch after it became difficult to loosen the pin to adjust the hitch height. It had been lubricated as specified but became very tight and felt as if it was cross-threaded. I have become disenchanted with the tamper-proof design of the adjustment and locking pins. I am in the cold northeast and they tend to get iced in and difficult to remove. The height adjustment pin has become damaged from my not consistently being able to the wrench fully into the cavity. I would like to see a different type of boltpin used.