Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs

See what our Experts say about this Draw-Tite Trailer Hitch Ball Mount

• What Parts do I Needed for a 2011 Lexus LX 570 to Tow a Cargo Trailer With Brakes?
  Hello Kenneth, Looks like you were on the right track with the wiring. The Hopkins Plug-In Simple Vehicle Wiring Harness # HM11143910 is going to get a 7 way, and 4 flat on the back of the 2011 Lexus LX 570. After reading the reviews, it looks like there are connectors on both the passenger and driver side of your vehicle. You will need to connect to the the ones on the driver side. One of our awesome customers was kind enough to share a picture of these connectors, so I went ahead and...
  view full answer...
• Torque Specs for the Draw-Tite Ball Mount for 2" Hitches
  Hey Frank, 2" hitch balls like what you see on the Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches # DT49MR should be torqued to 250 ft. lbs. This shank come pre-torqued though, so you shouldn't have to worry about that. If there is something else I can help you with, please feel free to leave a comment and let me know!
  view full answer...
• What Ball Mount and Coupler Is Needed For CE Smith Multi Sport Plus Boat and Kayak Trailer CE48870?
  The CE Smith Multi Sport Plus Boat and Kayak Trailer # CE48870 has a 2" ball coupler. It also requires a 4-way flat connector on your tow vehicle to operate the tail lights. The coupler has a height of 14" so you will need to ensure your ball mount has the correct amount of drop to tow level. If you measure the height to the inside of your receiver I can help you find the correct parts. The Draw-Tite Ball Mount w/ 2" Ball # DT49MR has a 2" drop and would fit with a 16" receiver height.
  view full answer...
• Trailer Hitch And Wiring For A 2021 Chevrolet TrailBlazer
  Yes the Draw-Tite # DT55GRdoes in fact fit your 2021 Chevrolet TrailBlazer! If you also need a ball mount and wiring I recommend the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT for the wiring and # DT49MR for the ball mount.
  view full answer...
• Need A Trailer Hitch And 7 Way For My 2020 Ford T350
  I suggest the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75912. It is a no drilling required install and takes the shortest amount of time to install in relation to other hitches for this model. While you are installing the hitch that will be a good time to add the Mounting Bracket for 7-Way # 18138. This will give you a location to mount your 7-way connection point so it is out of the way and in a safe place. I recommend the Tekonsha OEM Replacement Vehicle...
  view full answer...
• Trailer Wiring For a 2020 Acura RDX and Lights For Rebuild On Utility Trailer
  Since your 2020 Acura RDX did not come with trailer wiring you are going to need the T-One Vehicle Wiring Harness # 118804. Then you will be able to connect and pull your trailer with a Ball Mount # DT49MR. For your utility trailer if you are looking to install new Tail Lights # M844 & # M844L you might consider changing the Wiring # A25W2GWB harness as well if it is damaged. We also have the Fender Light # MCL180ARB if your trailer uses these style lights.
  view full answer...
• Ball Mount, Ball, and Hitch Pin to Use with Curt Hitch that Fits 2018 Subaru Outback Wagon
  When we had the Curt hitch # C13410 installed on a similar 2018 Subaru Outback Wagon as yours we found that from the top of the hitch opening down to the ground measured 15-1/2 inches. Since most trailer that your vehicle would tow would have a coupler height a couple inches shorter than that I would go with the Draw Tite ball mount part # DT49MR which has a 2 inch drop. This comes with a 2 inch ball which is a very common as well as a pin and clip to secure it.
  view full answer...
• Is Drilling Required To install Draw-Tite Hitch For 2021 Kia Forte
  Yes, there is some drilling that will be required to install the Draw-Tite Sportframe # DT83MR on your 2021 Kia Forte. You will likely have to drill some new holes, and enlarge a few holes for proper installation. This hitch is rated for 2,000lbs GTW and a maximum tongue weight of 200lbs. If you need a ball mount kit, I recommend the Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches # DT49MR. This kit comes with a 2" hitch ball, a 5/8" hitch pin, and a ball mount with a rise of 3/4" of...
  view full answer...
• Does the Draw-Tite Ball Mount DT49MR Come With Hitch Ball
  Yes, the Draw-Tite Ball Mount part # DT49MR comes with a pre-torqued 2" hitch ball as well as a 5/8" diameter hitch pin and clip. It comes ready to go and use.
  view full answer...
• Will Draw-Tite 2 Inch Ball Mount Rattle Around in Hitch Receiver Opening
  Every hitch and drawbar will have some movement between them, it's unavoidable. Any manufactured product like a receiver hitch will have variances in its size. For instance, the Curt # 14090 Class IV hitch has a 2 inch receiver. The actual measurement of the inside of the receiver tube is usually a little larger than 2 inches. The outside dimension of the shank of a ball mount like the # DT49MR you'd looked like is typically a tiny bit smaller than 2 inches. If the inside dimension of...
  view full answer...
• What Hitch and Ball Mount do You Recommend for My 2022 Subaru Outback Wagon?
  For towing with your 2022 Subaru Outback, a great hitch is the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - 2" # DT73RR. Not only does this hitch offer the greatest available weight capacity we currently carry for your vehicle, it also comes with an easier installation. All of our other hitches require you to remove the impact beam from the bumper. By avoiding this, the installation of the # DT73RR does not take as much effort. As far as the ball mount, it really depends on...
  view full answer...
• Comparing Trailer Hitches For A 2021 Jeep Grand Cherokee L
  For your 2021 Jeep Grand Cherokee L, we have two options. We have the Curt Trailer Hitch Receiver # C97JR, and the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit # DT42GR. Both of these hitches offer a 7,500lbs maximum GTW and can be used with a weight distribution system, however, the Draw-Tite # DT42GR has a tongue weight that is rated 375lbs higher than # C97JR. So if you're after the hitch that has the highest ratings, then # DT42GR is what you want. Although, you won't have...
  view full answer...
• Trailer Hitch And Wiring For A 2019 Tesla Model X
  For your 2019 Tesla Model X, we have the Draw-Tite Max-Frame # 76143. This is a class III hitch capable of towing up to 5,000lbs GTW, and 750 maximum TW. If you need wiring, I recommend the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT. This kit is plug-n-play into your factory harness, alleviating all cutting and splicing. Finally, if you need a ball mount, I recommend the Draw-Tite Ball Mount # DT49MR. This kit comes with...
  view full answer...
• Recommended Hitch Set-Up for a 2018 Acura RDX
  The Draw-Tite # 75784 will include all the hardware needed to get installed. This will require no drilling or trimming to get installed and will bolt directly to the frame of your 2018 Acura RDX. From here there will be a few parts needed depending on what you will be using the hitch for. If you will be towing, you will need a ball mount, ball, and pin/clip to hold them in place. Something like the Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches - 3/4" Rise, 2" Drop # DT49MR will include...
  view full answer...
• What Is The Difference Between The etrailer Hitch And The Curt hitch For A 2022 Hyundai Palisade
  The main difference between the Curt Trailer Hitch # C13427 and the etrailer Trailer Hitch Receiver # e95ZR is that the etrailer hitch has a rugged matte black finish and the Curt hitch has a glossy black finish. Other than that, these hitches are virtually identical with the same weight ratings and both of them being compatible with a weight distribution system. That being said I recommend the etrailer Trailer Hitch # e95ZR because you get an incredible product with a lot of versatility...
  view full answer...
• Hitch for 2022 Kia Telluride and Dual Ball Mount for Towing and Carrying E-Bike Rack
  When we installed the Curt hitch part # C13420 on a similar Telluride as your 2022 model we found that the hitch opening measured 16 inches from the top of the hitch opening down to the ground. Since your trailer has a height of right at 15-16 inches you'd want to shoot for around 2 inches of drop based on where you said you measured from which for that the # D210 would work great with. Should note that this hitch adapter cuts the capacity of the hitch it's used in by 50 percent. For...
  view full answer...
• Ball Mount and Hitch Ball for Towing a U-haul Trailer
  The Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs item # DT49MR you were looking at would work great to haul a 6 x 12 uhaul trailer. The trailer has a maximum 4,400 lbs capacity which would not exceed this ball mount and balls capabilities. If you are going to be towing regularly, I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a 3/4" rise and 2" drop. It...
  view full answer...
• Trailer Hitch for 2017 Ford Escape with 14 inch of Ground Clearance for Ball Mount
  Going with a ball mount that has a different amount of rise/drop is typically the easiest way to compensate for a hitch height and coupler height that does match up well. Like if you installed the etrailer hitch part # e98866 which has a distance of 14-1/4 from the top of the hitch opening down to the ground you could use a ball mount like the # DT49MR which can do a drop of 2 inches or a rise of 3/4 inch.
  view full answer...
• Portable Winch Solution for Master Lock Electric Winch
  We haven't carried that winch in some time but it was one that doesn't fit standard hitch winch mounting plates. Instead it was designed to attach directly to a hitch ball for an even easier portable type solution. So you could just bring a ball mount with you like the # DT49MR and it would be just as portable if not more.
  view full answer...
• Brake Controller And Ball Mount For A 2018 Thor Freedom Elite Motor Home With A Tow Dolly
  For your 2018 Thor Freedom Elite Motor home I recommend using the Curt Echo Wireless Trailer Brake Controller Item # C51180. This brake controller is going to be the easiest to set up and works just like a standard brake controller. I have one and love it. As far as the hitch receiver for your motor home, you would need to measure the distance between the frame rails. I have provided a link to the page to the universal heavy duty weld on hitches we offer as well as link to the bolt on...
  view full answer...
• Hidden Trailer Hitch For A 2021 Toyota RAV4
  For your 2021 Toyota RAV4, we have the EcoHitch Hidden Trailer Hitch Receiver # EH97FR. Due to the completely concealed cross-tube design, the hitch virtually disappears when not being used providing you with that from-the-factory look. If you're interested in a complete towing setup, you'll also need wiring # C56434 for your trailer lights, and a ball mount # DT49MR. You'll need to measure the rise and drop needed first, before committing to a fixed ball mount.
  view full answer...
• Trailer Hitch For A 2022 GMC Acadia
  For your 2022 GMC Acadia AT4 we have the Draw-Tite Max-Frame Trailer Hitch Receiver # 76023. This is a class III trailer hitch that is rated for 4,500 lbs maximum GTW, 675 lbs gross tongue weight, and is a direct fit for your 2022 GMC. If you plan on towing, you're going to need wiring so you can have working lights on your trailer. If you're interested, the T-One Vehicle Wiring Harness for Factory Tow Package # 118720 is a super easy kit to install, that just plugs into your factory wiring...
  view full answer...
• Would Draw Tite Ball Mount DT49MR Fit 2015 Nissan Pathfinder OEM Hitch
  Yes the Draw Tite ball mount part # DT49MR would fit the factory hitch of a 2015 Nissan Pathfinder.
  view full answer...
• Can You Flat Tow a 2020 Honda CR-V With a CVT Transmission
  The 2020 Honda CR-V Touring models are equipped with CVT style transmissions and should not be flat towed. I recommend using a tow dolly like the Roadmaster # RM-2050-1. It has a 4,250 pound capacity and adjustable tracks for the wheels on the CR-V. You would need a standard ball mount with a 2 inch ball to connect the tow dolly to the towing vehicle # DT49MR and a brake controller to activate the electric brakes. I suggest the Tekonsha Prodigy P3 # 90195, but you will need to contact...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?