bing tracking image
  1. Trailer Hitch Ball Mount
  2. Draw-Tite
  3. Fixed Ball Mount
  4. Fits 1-1/4 Inch Hitch
  5. Rise - 1 Inch
  6. No Ball
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 9-3/4" Long - 2,000 lbs
Draw-Tite

Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 9-3/4" Long - 2,000 lbs

Part Number: 3591
In Stock
$21.43
Retail:$73.53
You Save: 71%
Trailer Hitch Ball Mount
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Sturdy steel ball mount with solid shank measures 9-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection. Great Prices for the best trailer hitch ball mount from Draw-Tite. Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 9-3/4" Long - 2,000 lbs part number 3591 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2184)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch Ball Mount - 3591

  • Fixed Ball Mount
  • Fits 1-1/4 Inch Hitch
  • Rise - 1 Inch
  • No Ball
  • 2000 lbs GTW
  • Class I
  • Draw-Tite
  • Steel Shank - Gloss Black
  • 3/4 Inch Ball Hole Diameter

Sturdy steel ball mount with solid shank measures 9-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection.


Features:

  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Drawbar can be used in rise position only
  • Sturdy steel construction with solid shank
  • Black powder coat finish covers a-coat base for superior rust protection
  • Hitch pin and clip included - hitch lock sold separately


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
    • Class I and Class II compatible
  • Gross towing weight: 2,000 lbs
  • Tongue weight: 200 lbs
  • Length: 9-3/4" from center of hitch pin hole to center of ball hole
  • Rise: 5/8" from top of inside of hitch opening
  • Ball hole diameter: 3/4"
  • Pin hole diameter: 1/2"
  • Limited lifetime warranty


How to Measure Drop on Standard Ball Mount

3591 Draw-Tite Ball Mount for 1-1/4" Hitches - 5/8" Rise - 9-3/4" Long - 2,000 lbs

Replaces 6802




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 9-3/4" Long - 2,000 lbs - 3591

Average Customer Rating:  4.8 out of 5 stars   (2184 Customer Reviews)

Sturdy steel ball mount with solid shank measures 9-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection.

by:

Great company to deal with would recommend them for your trailer hitch needs!!



by:

I'm giving this company an excellent review. We received our product and one part of it was 1/8 of an inch from fitting properly. I called customer service and the lady I spoke with was very helpful. They went through all the hitches like this that they had and figured out the problem. She sent me a new one free and it worked great! Thanks for the awesome service!



by:

Received my ordered extended drawbar a day early. Super solid metal. No hollow tubing. I am very confident that there will be no problems towing my trailer. Thanks guys for the review video. It was helpful in making this choice.

Jose profile picture

Jose

6/30/2020

Great extention bar. Give me the necessary length needed to pull my kayak.



by:

Steve performed 'above & beyond' the call of duty to ensure that I received the correct parts, on time. His thoroughness & commitment to excellence are COMMENDABLE!



by:

bought a hitch bar for my sidebyside, going to hang a flag on it,.. this one reasonable priced and complete, worked well, shipped as advertised.. recommend...

Thunder T. profile picture

Thunder T.

6/7/2018

still holds the flag pole...



by:

As with every order we have made with etrailer, must say excellent, from the customer assistance to the actual products. The trailer hitch for my friends Honda is perfect. Thanks this is the way all companies should be.



by:

The hitch and ball mount were exactly as described. Delivery & communication were excellent. My mechanic installed it without a "hitch" (haha)!



by:

This drawbar leveled my trailer perfectly and was able to adjust the tounge weight easily. Great service and delivered when promised for my vacation.



by:

Just what I was looking for, it extended the ball about 3" from the rear bumper



by:

Needed a spare to put a 2" ball on. Excellent condition looks rugged enuogh to handle all my towing needs



by:

Nice mount! Very heavy duty!

Fast
shipping.



by:

'Just arrived today. So great turnaround on the delivery. Obviously haven't had a chance to use it yet, but I have one similar to it already, so anticipate satisfactory use.

Thanks.



by:

awesome fit for my car



by:

The products were easy to locate and purchase on the website. Devivery was prompt in secure sturdy packaging.



by:

Place my order and it was delivered on time.
Prices are great



by:

Nice product and fast shipping



by:

Excellent shipping, perfectly matched my vehicle, and will recommend to others!



by:

Good product. Just as advertised, at a good price.



by:

Quite pleased with the prompt delivery of my order.



by:



by:



by:



by:



by:



by:

Nice drawbar!


25
2181
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch Ball Mount

  • What Ball Mount For Draw-Tite Class I Trailer Hitch Receiver, # 24769, on 2007 Dodge Caliber
    All Class I, 1-1/4 inch trailer hitches will require a special ball mount, and are designed for Class I accessories. The Class I 1-1/4 inch hitches will not accept any Class II 1-1/4 inch accessories. The Draw-Tite Sportframe Drawbar 5/8 inch Rise 2000# Kit, # 3591, is designed to be used in the Draw-Tite Class I Trailer Hitch Receiver, # 24769, on your 2007 Dodge Caliber. If a different ball mount is needed for towing a trailer then that means your vehicle most likely should not be towing...
    view full answer...
  • Trailer Hitch and Bike Carrier for a 2010 Dodge Caliber Mainstreet
    Starting with the trailer hitch, the Draw-Tite hitch # 24769 that you have selected is a correct fit for your 2010 Dodge Caliber Mainstreet. And the Swagman bike carrier # S64670, will fit the hitch and your Caliber as well. I have linked a video showing this bike rack on a 2011 Caliber. If all you want to do with the hitch is use it for a bike rack then you will not need a ball mount at all. If you do plan on towing a trailer then you would need ball mount # 3591, a 1-7/8 inch ball #...
    view full answer...
  • Recommended Trailer Hitch Receiver and Wiring for 2008 Dodge Caliber
    The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24769 is the trailer hitch receiver I recommend for your 2008 Dodge Caliber. I've attached a video of this simple bolt on installation for you. All the installation hardware is included with the hitch. For your wiring, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118552 which will connect behind your tail lights and give you a 4-way trailer connector. Once you've plugged...
    view full answer...
  • Trailer Hitch Recommendation for 2009 Dodge Caliber
    The trailer hitch receiver I recommend for your 2009 Dodge Caliber is the Draw-Tite Trailer Hitch Receiver # 24769. This hitch is the easiest installation for your vehicle, requiring nothing more than lifting it into place and bolting it on, as you can see by the linked instructions and video install. If you plan on towing, there are a few more parts you are going to need to complete your set up, which I'll link for you. - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector...
    view full answer...
  • Recommended Hitch for a 2006 Saturn Ion
    We have just what you need. There are two options with negligible cost difference. The Curt Trailer Hitch Receiver, # C11115 that is confirmed to fit the 2006 Saturn Ion excluding Ion3 with 2.4L engine option. Or, the Curt Trailer Hitch Receiver, # C11447 for the the 2006 Saturn Ion Red Line and Ion3 equipped with a 2.4L engine. Both have equal specs of being a Class 1 hitch with a 1-1/4" receiver, maximum gross trailer weight of 2,000 lbs. and max tongue weight of 200 lbs. Both are...
    view full answer...
  • Recommended Drawbar For 2019 Subaru Forester With Class I Trailer Hitch Receiver
    Based on the measurement you provided of the trailer hitch receiver on your 2019 Subaru Forester and the trailer coupler it sounds like you will need a drawbar with no rise. You are correct that you want to measure from the ground to the bottom of the coupler, but the coupler will be roughly 2" tall meaning you will be almost perfectly even. I recommend the Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 9-3/4" Long - 2,000 lbs # 3591 as it will be perfect for keeping your trailer...
    view full answer...
  • Are All Ball Mounts Reversible?
    Not all ball mounts are reversible (meaning they have a rise and drop), but most do. Some Class I ball mounts, like part # 3591, are to be used solely in the rise position.
    view full answer...
  • Can I Attach A Hitch Cargo Carrier To A Trailer Hitch On A 2012 Mercedes-Benz E-Class Sedan
    I do have a solution for you that would not require a trailer hitch adapter, meaning you can carry up to 200 lbs on the tongue of your trailer hitch. This is the maximum tongue weight for the trailer hitch compatible with your 2012 Mercedes-Benz E-Class, part # C11001. The tongue weight will include the weight of the carrier and the items you will be carrying. The 20x47 Reese Cargo Carrier for 1-1/4" Hitches - Steel - 300 lbs, part # 63155, weighs about 44 lbs, leaving you with 156 lbs...
    view full answer...
  • Is a Ball Mount Required to Tow Trailer with 2007 Dodge Caliber
    Draw Bars are needed for towing. Another name for them, that to me makes more sense, is "ball mount" Basically this is the piece of metal that inserts into the hitch opening that holds the hitch ball for your trailer to connect to. If you want to tow with your 2007 Dodge Caliber you will need a ball mount. First you need a hitch installed though. For that the Draw Tite part # 24769 is the correct fit. And then for a ball mount/draw bar you'd want the part # 3591 which is what Draw Tite...
    view full answer...
  • Which Ball Mount Should be Used on a Hitch for a 2009 Dodge Caliber
    With the Draw-Tite hitch, part # 24769, for your 2009 Dodge Caliber you should use part # 3591. I have added a link to the instructions for the hitch so that you can see the hitch profile and how the draw bar is positioned. Draw bar part # 36061 is for a Class II hitch and the hitches available for your Caliber are Class I, except for the Valley, so that ball mount would not fit in the hitch. I have included a link to all the ball mounts we carry for Class I hitches. You want the trailer...
    view full answer...
  • Will the Curt Trailer Hitch, # C11308, Fit a 2007 Mazda 6 Hatchback And Wagon
    The Curt Trailer Hitch, item # C11308, will fit the 2007 Mazda 6 Sport Wagon models only. For the 2007 Mazda 6 five door hatch back, and the 4 door sedan, you would need to use the Curt Trailer Hitch, item # C11329. Some items you may need to complete your Class I towing setup are listed below. Wiring, item # C59496, for the 2007 Mazda 6 Sport Wagon Wiring, item # 118405, for the Mazda 6 4 Door Sedan and 5 Door Hatchback Drawbar, item # 3593, for the 2007 Mazda 6 Sport Wagon Drawbar,...
    view full answer...
  • Towing Setup Recommendations for a 2007 Dodge Caliber SXT
    This Draw-Tite Trailer Hitch, part # 24769, has towing capacities of 2000 lbs total trailer weight and 200 lbs tongue weight. If your boat and trailer weighs less than that this hitch would be adequate for you. You should also consult the owners manual of your 2007 Dodge Caliber SXT for the towing capacity of your vehicle. You should always go with the lowest towing capacity of all the components of your towing setup when determining your overall towing capacity. If you determine that...
    view full answer...
  • Ball Mount and Ball Recommendations for Draw-Tite Class I Trailer Hitch on a 2011 Dodge Caliber
    I checked to see which hitch you ordered for your 2011 Dodge Caliber and it was Draw-Tite hitch # 24769. For Class I trailer hitches like this you are supposed to use the ball mount recommended by the hitch manufacturer. In this case it is # 3591 and the hitch instructions indicate it should be used in the rise position only (with the ball platform on top). A hitch pin with clip is included. If the trailer you will be towing takes a 1-7/8 inch ball you can use ball # 19256. And if it requires...
    view full answer...
  • Drawbar for 2018 Subaru Forester With Factory Hitch
    The 2018 Subaru Forester OEM hitch is Class I, so you would only need a Class I compatible drawbar. I recommend the Draw-Tite # 3591, which has no drop and just a 5/8" rise. This drawbar comes with a pin and clip so the only thing you'd need is a compatible hitch ball. For a 2" ball you would want # 19258, and for a 1-7/8" hitch ball you would want # 19256. I have added a link to a video review of this drawbar for you to take a look at.
    view full answer...
  • Hitch Recommendation for a 2007 Dodge Caliber Towing a Jet Ski Trailer
    It's very possible that you could tow a Jet Ski with your 2007 Dodge Caliber but you will need to check a few things first. You will need to know what the owners manual of the Caliber says is the towing capacity for the vehicle and you will need to know the weight of the trailer with the Jet Ski loaded on it. If the Jet Ski weighs less than the weight capacity for the vehicle you would be OK to tow with it. Now for a hitch you would want the Draw Tite hitch part # 24769. I attached an...
    view full answer...
  • Trailer Hitch and Wiring Recommendation for 2003 Mitsubishi Outlander
    First thing you'll need for your 2003 Mitsubishi Outlander is a trailer hitch like the Curt hitch part # C12293 which is a confirmed fit and will work well. Next you'll need trailer wiring. Which for that you'd want the # C55565 which is a confirmed fit too. For a ball mount you'd then want the part # 3591 and for hitch balls part # 19258 for a 2 inch ball and part # 19256 for a 1-7/8 inch ball.
    view full answer...
  • Trailer Hitch Recommendation for 2008 Dodge Caliber to Tow Small Trailer
    For lighter duty vehicles like your 2008 Dodge Caliber there are only lighter duty hitches like the Draw Tite part # 27469 which would not be rated high enough for a power wheelchair and carrier so you'd need to use a small trailer with this hitch to carry a chair as heavy as yours. You'd also need trailer wiring which for that you'd need # 118552 and then for a ball mount # 3591 and hitch ball # 19256.
    view full answer...
  • Receiver Hitch, Wiring and Other Necessary Towing Accessories for 2007 Dodge Caliber
    In order to tow a trailer, you will need a hitch, a draw bar and pin and clip, a trailer ball and a vehicle wiring harness. I would recommend the Draw-Tite Class I receiver, part # 24769. This receiver fits all Caliber Models EXCEPT for the R/T model. This hitch includes the pin and clip. If you have the R/T model, Curt Manufacturing offers a Class I receiver, part # C11006 that will fit all models except for the SRT-4. The draw bar and pin and clip are also included. The trailer rental...
    view full answer...

Do you have a question about this Trailer Hitch Ball Mount?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jacob T
Video Edited:
Jacob T
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Brian T
Updated by:
Brian T
Employee Mike S
Updated by:
Mike S
Employee Chris R
Video by:
Chris R
Employee Adam E
Installed by:
Adam E

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924