1. Trailer Hitch Ball Mount
  2. Draw-Tite
  3. Fixed Ball Mount
  4. Fits 2 Inch Hitch
  5. Drop - 2 Inch
  6. Rise - 1 Inch
Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 12" Long - 12,000 lbs

Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 12" Long - 12,000 lbs

Item # 4284
lowest price pledge
Our Price: $49.23
You Save: 40%
Trailer Hitch Ball Mount
Orders above $99 qualify for Free Shipping
Shipping Weight: 20 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos


Sturdy steel ball mount with solid shank measures 12" from center of hitch pin hole to center of ball hole. Zinc finish provides excellent rust protection. Lowest Prices for the best trailer hitch ball mount from Draw-Tite. Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 12" Long - 12,000 lbs part number 4284 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (19)
  • Q & A (11)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch Ball Mount - 4284

  • Fixed Ball Mount
  • Fits 2 Inch Hitch
  • Drop - 2 Inch
  • Rise - 1 Inch
  • Draw-Tite
  • No Ball
  • Class IV
  • 12000 lbs GTW
  • Long Shank
  • Steel Shank - Silver
  • 1-1/4 Inch Ball Hole Diameter

Sturdy steel ball mount with solid shank measures 12" from center of hitch pin hole to center of ball hole. Zinc finish provides excellent rust protection.


  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Both drop and rise positions available to ensure level towing
  • Sturdy steel construction with solid shank
  • Zinc finish provides excellent rust protection
  • Hitch pin and clip or hitch lock sold separately


  • Application: 2" x 2" trailer hitch receivers
  • Gross towing weight: 12,000 lbs
  • Tongue weight: 1,200 lbs
  • Length: 12" from center of hitch pin hole to center of ball hole
  • Rise: 1" from top of inside of hitch opening
  • Drop: 2" from top of inside of hitch opening
  • Ball hole diameter: 1-1/4"
  • Ball platform dimensions: 7/8" thick x 3" wide
    • Requires ball shank that is at least 1-1/4" long
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty

4284 Diagram

4284 Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 12" Long - 12,000 lbs

California residents: click here

Customer Reviews

Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 12" Long - 12,000 lbs - 4284

Average Customer Rating:  5.0 out of 5 stars   (19 Customer Reviews)

Sturdy steel ball mount with solid shank measures 12" from center of hitch pin hole to center of ball hole. Zinc finish provides excellent rust protection.

- 4284

Excellent hitch! Needed the extended length as our bumper isn't notched for towing. With a tongue weight of 1100#, there aren't many hitches that offer the extension with weight rating. This one fits perfect! Thanks

- 4284

It was easy to order the items I needed using etrailer.com. They had everything I needed at a good price and free and quick shipping!

- 4284

Very rugged ball mount and is longer than the typical length. Great option if you need a Class IV level mount with a little extra bumper clearance length.

This gets used weekly and its holding up great.
Ben - 08/06/2019

- 4284

- 4284

This is definitely a sturdy hitch. The quality of the product is undeniable and I'm looking forward to putting my first big load on it. The extra length is just what I needed to get my trailer winch back far enough to lower my truck's tailgate while hooked up. Customer service has been outstanding. Product arrived neatly packaged 3 days earlier than it was supposed to and a follow up email asking if anything was wrong was sent not even a day after receiving delivery.

- 4284

The ball mount, p/n 4284, fit perfectly on my 2007 Range Rover. It extends out from under the vehicle far enough to safely attach my utility trailer without damaging the rear of the Range Rover. I recommend this ball mount to anyone needing this application. Thanks for a great product.

- 4284

The product was everything that was advertised. It fit perfect and was a perfect length. I needed 3 inches and this ball mount got me 4 inches. Perfect. Thanks P.S. The 2-5/16" ball was perfect too !!

- 4284


- 4284

this thing is very heavy duty. could probably pull a tank

- 4284

Like etrailers products and their customer service is great.

- 4284

The videos were very helpful in understanding the details of the equipment. Thanks.

- 4284

Excellent service, great products. Thank you!

- 4284

Built like tank and will outlast the truck and myself.

- 4284

Really nice thanks

- 4284

Very solid hitch!

- 4284

Quality as described and excellent delivery, as promised.

- 4284

As advertised, arrived quickly, very sturdy piece of equipment, including the ball

- 4284

Good product with the length I needed. Fast and smooth delivery.

- 4284

Just what I expected


Ask the Experts about this Draw-Tite Trailer Hitch Ball Mount

  • Draw-Tite Ball Mount Part Number 4284 Dimensions
    I am not sure where you are coming up with the 4.88 inches for the Draw-Tite Ball Mount, # 4284. We have a photo on the product page showing the dimensions of the ball mount, which shows the distance from the ball mount hole to the weld for the ball platform which is 6-3/4 inches. I went out to the warehouse and measured the length of the ball mount platform and it measures 6-9/16 inches long overall and 3 inches wide. If these measurements do not help, or you were looking at a different...
    view full answer...
  • Solution for Adding Tailgate Clearance While Ball Mount and Keeping Trailer Level
    Getting your trailer as level as possible when it's hooked up to your Ford F-150 is definitely a goal worth working towards and I do have an option that may allow you to achieve this while still gaining the clearance you need for your tailgate. Using a ball mount that doesn't feature a sufficient drop will cause the trailer to ride nose high. If you have a dual axle trailer this will put more weight on the rear axle, leading to uneven tire wear and possibly causing damage if that rear...
    view full answer...
  • Selecting Proper Ball Mount for Towing Cargo Trailer Behind 2002 County Coach Motorhome
    We offer ball mounts in various lengths to allow for plenty of clearance between the tow vehicle and hitched trailer. In your case you need a ball mount long enough to allow the hitch ball to clear your motorhome's rear bumper and so the Draw-Tite # 4284 that you referenced will work fine since it provides 12-inches of space between the hitch pin hole and the ball mounting hole. This ball mount provides either a 1-inch rise or a 2-inch drop in height depending on which way you install it. You...
    view full answer...
  • Ball Mount Recommendation for a Truck and Trailer that Sit Perfectly Level
    Since your hitch height is the exact same as your coupler height your best option would be to go with a ball mount with a 1 inch rise since that is the closest to a zero rise/drop ball mount we offer. The tongue weight of your trailer will cause the rear of your truck to sag slightly which will put your setup at very close to perfectly level. The ball mounts part numbers # 4280 and # 4284 both would work well for you. The # 4284 is just a longer version of the # 4280.
    view full answer...
  • Recommended Ball Mount With Longer Shank To Accommodate Rock Tamer Mud Flaps
    The Rapid Hitch Adjustable Ball Mount, part # AM3410 measures 3-3/8 inches from the back of the ball assembly to the closest pin hole and 4-3/8 inches to the furthers hole on the shank. This has a maximum rise of 6-1/2 inches and a maximum drop of 5-1/2 inches and has a towing capacity of 8,000 when using the 2 inch ball and 10,000 when using the 2-5/16 inch ball. I have attached a product review video you can check out. We have a couple fixed ball mounts that may work for you. The...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • How to Figure Weight Capacity When Using a Hitch Extender or Extra Long Ball Mount
    One thing to note when using a hitch extender like the Hidden Hitch, # 80307, is that the the tongue weight and towing capacity of your trailer hitch will be reduced by 50 percent due to the increased leverage that is placed on your trailer hitch from your trailer. In your situation, even with the towing capacities of your hitch capacities reduced by 50 percent, you are still limited to the 3,500 lbs gross trailer weight capacity and 350 lbs tongue weight capacity of the hitch extender....
    view full answer...
  • Selecting A Ball Mount When Trailer And Coupler Are Same Height
    When towing, the trailer should always be as level as possible. A level trailer will put less strain on the connection between the trailer and hitch. It will also help the trailer stay in line behind the vehicle. I have attached a couple of helpful articles that you can check out that explains towing and how to measure to make certain you get the correct ball mount. After you have taken your measurements you can check out the attached link for the ball mounts we offer. Use the menu...
    view full answer...
  • Trailer Hitch Extension Needed to Allow Tailgate to be Lowered with Trailer Attached to Vehicle
    I would not recommend any type of extension with your towing setup. Extenders create more torque on the vehicle frame, hitch, drawbar, extender and hitch ball because of the extension, just like adding a pipe to the end of a breaker bar. This added torque reduces that weight capacity of all of the components in the system by 50 percent, so your vehicles 10 K capacity would be lowered to 5 K if a hitch extension is used. I would go with a long ball mount that is just long enough so you...
    view full answer...
    Image 1 for
  • Longer Ball Mount Recommendation with 1 inch Rise
    The closest ball mount we have to what you are looking for is the Brophy Ball Mount part # EA20 which has a 1 inch rise and is 9-3/4 inches from the center of it's hitch pin hole to it's ball hole.
    view full answer...
  • Recommended 2 Inch Ball Mount With 1 Inch Rise
    For a 2 inch ball mount that offers a 1 inch rise/2 inch drop and a 12K capacity, I'd recommend the Draw-Tite # 4284. For a 2-5/16 inch ball, use # 19286 which also has a 12K capacity. If you don't need that much capacity, go for the Curt # C45030 and for a 2-5/16 inch ball, use # 63847. This combination would have a 7500 lb maximum capacity. For either setup, you'd also need a # PC3 hitch in.
    view full answer...
  • Dimensions of Draw-Tite Heavy Duty Ball Mount part # 4280
    The platform that the ball mounts to is 3 inches wide by 7/8 inches thick. The shank that s into the hitch is 2X2 inches square. The distance from the center of the hitch pin hole to the back of the ball platform is 3-5/16 inches. If the Thule rack you have is designed to clamp around the ball mount and has a maximum clamp of 2-5/8x2-5/8 inches, it should fit around this ball mount, but you need to measure your hitch. Measure from the center of the hitch pin hole on your hitch to the face...
    view full answer...

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Robert G
Expert Research:
Robert G
Employee Adam R
Expert Research:
Adam R
Employee Laura H
Updated by:
Laura H
Employee Alexander C
Updated by:
Alexander C
Employee Brian T
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.