Curt Class II Euro Style Drawbar with 1-7/8" Ball - 2-5/8" Rise - 3,500 lbs

Ask the Experts about this Curt Trailer Hitch Ball Mount

• Is There An Anti-Rattle Pin/Lock for Curt Class II Euro Style Drawbar
  The Curt Class II Euro Style Drawbar part # C45571 has a solid shank so it would not work with any sort of threaded anti-rattle device. Instead, you'd need to use something like the Roadmaster Quiet Hitch for 1-1/4" Trailer Hitches part # RM-061-125 with the etrailer Trailer Hitch Receiver Lock part # e98879.
  view full answer...
• Euro Style Ball Mount Recommendation for 2013 Ford Focus with 1-7/8 inch Hitch Ball
  With Class I hitches like what your 2013 Ford Focus would have you have to stick with the ball mount that the manufacturer recommends for it. For a 1-7/8 inch Euro style ball mount you'd need the # C45571 as that is the correct size. This has 2-5/8 inches of rise.
  view full answer...
• Picking Out Correct Ball Mount for Towing Trailer with 2016 Mazda CX5
  I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver opening on the hitch while on level ground. Next, you will measure the coupler height from the ground to the bottom of the trailer coupler when the trailer is on level ground. Next, you will need to compute the difference. If the hitch height...
  view full answer...
• Is Ball on Curt # C45571 Euro-Style Ball Removable
  The Curt Euro-Style Class II ball mount you referenced, part # C45571 features a permanently attached 1-7/8 inch trailer ball which is not removable. If you were wanting a ball mount with a similar rise where you could interchange the trailer ball, I'd recommend going with a standard type ball mount, like part # C45017. If you anticipate needing to change between 1-7/8 and 2 inch trailer balls frequently, I'd recommend using a interchangeable ball set-up like what Convert-A-Ball offers....
  view full answer...
• Which Class I Ball Mount to Use with Draw-Tite Hitch # 24756 for 4-Inch Rise on 2008 Chevrolet HHR
  Draw-Tite hitch # 24756 is a light-duty 1-1/4-inch Class I hitch that installs in your 2008 Chevrolet HHR without need to drill any new holes on the car's frame. It requires use of a compatible Class I ball mount # 3594 which offers a 4-inch rise. With this ball mount you can use 1-7/8-inch hitch ball # 19256. If you refer to the linked photo you'll see the mount's dimensions. This 10-inch-long ball mount will provide both enough clearance at your bumper and the required 4-inch height...
  view full answer...
• Ball Mount Recommendation for Curt Hitch for 2008 BMW 335xi
  With Class I hitches like what is available for your 2008 BMW 335xi, part # C11033 you have to go with the recommended ball mount otherwise the warranty of the hitch is no longer valid. So you have to use the part # C45521 which is what Curt recommends. It has a 2-5/8 inch drop and 3-1/4 inch rise.
  view full answer...
• Recommended Trailer Hitch Receiver for 2018 Honda Fit Sport
  The Curt Trailer Hitch Receiver # C11406 is a fit for all 2018 Honda Fit models including the Sport. If you will be using this for a bike rack or other accessory, you will also need the stability strap # 18050 to keep your manufacturer warranty in tact. If you will be towing a light trailer, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56395 and ball mount # C45571 or # C45572.
  view full answer...
• Can a 2012 Ford Focus Tow a 600 lbs Total Jon Boat?
  According to your owners manual, your 2012 Ford Focus should never tow a trailer and is not equipped to tow. Using a trailer hitch like # C11158 is ideally to be used for accessories like a bike rack. Your vehicle has a payload rating between 935 and 1,055 lbs so if somehow you fit it inside your vehicle Ford would be okay with it. I personally would tow that trailer (but not anything larger than the jon boat) and you would be operating outside of Ford's warranty and recommendation. Based...
  view full answer...
• Does 2017 Chevy Cruze Diesel Have Towing Capacity and Parts Needed to Tow Small Trailer
  I took a look at the owner's manual for your 2017 Chevy Cruze and on page 261 it states "The vehicle is neither designed nor intended to tow a trailer" so I cannot recommend you do so, though the decision is of course up to you. If you do decide to tow, then you will absolutely want to go with the lightest, smallest of the trailers. For a diesel model of '17 Cruze the available trailer hitch from Curt is part # C11492, and since you mentioned 2" ball I assume you are also using the...
  view full answer...
• Trailer Hitch Compatible with 2012 Infinity M37
  The 2012 Infinity M37 is the rear wheel drive versus the M37X which is all wheel drive. This will not change the hitch fit at all, so the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11111 will absolutely fit your M37. It is an installation you can do yourself, but it does require removing the bumper and trimming an underbody panel. There is no drilling required and I've attached the installation details to assist. If you will be using this hitch for a bike rack...
  view full answer...
• Towing Capacity and Hitch Recommendation for 2013 Honda Accord Coupe and CVT Transmission
  According to the online copy of your owner's manual, your 2013 Honda Accord Coupe has a maximum total trailer weight limit of 1,000 lbs. This includes the weight of the trailer, cargo, and everything inside or loaded on top of it. While CVT (continuous variable transmission) vehicles aren't ideal for trailer towing, as long as you adhere to the limits outlined in your owner's manual, you shouldn't have any problems. I suggest confirming this information on your hard copy of the owner's...
  view full answer...
• What is the Weight of the Curt Trailer Hitch 12343
  The Curt Trailer Hitch Receiver # C12343 has a shipping weight of 24-lbs; about 1-1/2 to 2-lbs of that is going to be the packaging. This hitch does come with all of the hardware needed to install your hitch. If you're going to be towing with this hitch, you'll also need a wiring harness, ball mount and hitch ball. For the wiring I recommend using the Tekonsha # 118405 because I've found that the Tekonsha harness converter boxes are a bit more reliable over time. For the hitch ball...
  view full answer...
• Recommended Euro-Style Ball Mount for a 2015 Nissan Altima with Curt Class I Trailer Hitch
  The recommended 2 inch Euro style ball mount for Curt trailer hitch # C11352 on a 2015 Nissan Altima is # C45572. I went out to the warehouse and pulled one to take some measurements. From the center of the pin hole to the part of the shank where it starts to bend up is 3 inches. This will work because the rear bumper on the Altima tapers upward above the hitch receiver. At 6-1/2 inches out from the center of the hitch pin hole, where the shank starts to bend straight up, it is at a...
  view full answer...
• I Need 50mm Hitch Ball With Curt Hitch To Meet European Standards
  I have a solution for you, but I do not recommend using the 2" hitch ball to take the place of the required 50mm hitch ball. If you are towing with a trailer that accepts that only the 50mm hitch ball, deviating from that recommendation could potentially cause towing issues. Since the 50mm ball is required, I recommend using the Curt Drawbar # C45521 with 50 mm Hitch Ball # 63912 with trailer hitch # C11337. That way if you are connecting to trailer that only accepts a 50 mm hitch ball...
  view full answer...
• How to Install the Curt Trailer Hitch Receiver on a 2013 BMW 128i
  The only hitch receiver we have confirmed to fit your 2013 BMW 128i is the Curt Trailer Hitch Receiver part # C11184. Unfortunately, we have not had a chance to install this hitch on a 2013 BMW 128i yet. However, the installation process is fairly straightforward and I will do my best to walk you through the process below. Before you get started you will need a few tools for installation: 8, 10, and 19mm sockets, 12" extensions, Ratchet, 19mm wrench, Flat Head Screwdriver, Rotary Tool...
  view full answer...
• Trailer Hitch Recommendation for 2015 Toyota Yaris
  For a newer vehicle like yours I would go with the Curt hitch part # C11480 which is a confirmed fit and does not require any fascia trimming. Any time you don't have to modify a new vehicle, I recommend going that route. For ball mounts we have the part # C45572 for a 2 inch ball or the part # C45571 for 1-7/8 inch ball. Then for trailer wiring you woudl want the part # 118661 which is a confirmed fit. Due to the light duty nature of your vehicle I would not imagine that a trailer...
  view full answer...
• Trailer Hitch Recommendation for a 2014 Honda Accord Coupe
  The Curt hitch part # C11681 is the most popular hitch we offer for your 2014 Honda Accord and only requires you trim the heat shield as far as permanent modifications go. There wouldn't be any drilling or rear bumper trimming. The exhaust does have to be temporarily lowered but that is pretty standard for trailer hitch installs. I attached an install video for you to check out as well. For trailer wiring you would want the part # C56011 for if you do not have LED taillights or part...
  view full answer...
• Would Curt Hitch C11773 Fit a 2002 Acura MDX with Single Exhaust
  The Curt hitch part # C11773 has been confirmed as a fit for your 2002 Acura MDX and has no fit exclusions for versions of your vehicle based on exhaust style so it would fit and work well for you. For a 1,000 lb jetski and trailer this hitch would fit and work well. You really wouldn't need the additional capacity that a 2 inch hitch would provide so this would work well. For trailer wiring you would then want the part # 118336 which is a confirmed fit as well. For a ball mount...
  view full answer...
• Will Curt Hitch C11555 for a 2016 Honda CR-V Tow a Small Trailer
  If the trailer weighs less than 2,000 lbs the Curt hitch part # C11555 that you referenced would be capable of towing it. This hitch has a 2,000 lb total trailer capacity and 200 lb tongue weight capacity. To complete your towing setup you would want the part # C45572 for a ball mount with a 2 inch ball or part # C45571 for a 1-7/8 inch hitch ball. For trailer wiring you would then want the Curt Harness part # C56158. I attached an install video for this plus one for the hitch as well.
  view full answer...
• Parts Needed to tow PWC Trailer with a 2015 Chevy Impala LTZ
  We have exactly what you will need. But before that I wanted to thank you for looking up the towing capacity of your vehicle beforehand as that is a very important step many people ignore. The Curt Class II hitch part # C121115 is confirmed to fit your 2015 Chevy Impala LTZ and would work well for your needs. I attached an install video for you to check out as well. If the trailer you plan to tow calls for a 1-7/8 inch hitch ball you would want the ball mount part # C45571 or for...
  view full answer...
• Recommended Trailer Hitch for 2018 VW Golf R Model
  I reached out to my contact at Curt and they have not yet tested the fit on your model. It is very likely that the Curt Trailer Hitch Receiver C11475 will fit your vehicle but the fit has not yet been confirmed. For the only confirmed fit we have for your 2018 VW Golf R model, I recommend the EcoHitch # 306-X7333. I've attached the installation instructions to help. The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56374 is also a very likely fit...
  view full answer...
• Who Can Install a Trailer Hitch on a 2005 Chevy Corvette Convertible
  A motorcycle purist would say Ride that hog to Sturgis! But you and I know that is not always an option. Plus there is something about a Vette towing a Harley that is awesomely American. Talk about turning some heads! I checked with Curt and they have a Gold level installer at the Sears at the Lima, Ohio shopping mall who could install hitch # C11034 on your 2005 Chevy Corvette. A trusted mechanic or RV dealer with a service center could also perform the installation. Please note that...
  view full answer...
• Picture of Curt Trailer Hitch Installed on a Cadillac CTS Coupe
  Curt has a nice picture of trailer hitch # C11196 installed on a Cadillac CTS coupe. I have include it for you here. The hitch receiver and cross tube are visible beneath the rear fascia of the vehicle. If you plan on doing any towing with the hitch then the correct ball mount to use is # C45571 for a 1-7/8 inch ball or # C45572 for a 2 inch ball. For trailer wiring you can use # C56044. I have linked the instructions for the wiring as well. If you are using the hitch for a bike rack...
  view full answer...
• Will Curt Trailer Hitch Fit a 2006 Chevy Corvette with Corsa Cat Back Exhaust
  Trailer hitches including # C11380 are designed for and tested on stock vehicles so I cannot say for sure if it will fit with aftermarket exhaust installed on your 2006 Vette. But if the new exhaust has the exact same dimensions as the stock exhaust and installs in exactly the same way then the hitch would fit. If you plan on doing any towing with the hitch then you can use 1-7/8 inch ball mount # C45571 or 2 inch ball mount # C45572. And for wiring you would need # 56014 .
  view full answer...
• Which Trailer Hitch Fits 2014 Mercedes E-350 and Has Capacity for PWC Trailer
  For your 2014 Mercedes E350 Sedan the Curt hitch part # C11001 is a confirmed fit. The hitch itself has the capacity needed to tow a trailer with a 825 Sea Doo PWC, but you would need to check the owners manual of your vehicle to determine the vehicle's towing capacities and be sure to stay under them as well. For a ball mount you would want part # C45572 for a 2 inch hitch ball or the part # C45571 for a 1-7/8 inch ball. For trailer wiring you then would want the Tekonsha kit part...
  view full answer...
• Recommended Trailer Hitch For 2016 Scion iM
  The trailer hitch we offer for your iM is the Curt Trailer Hitch, part # C11420. This is a Class l hitch and it has a 1-1/4 inch receiver opening. This will work great for light towing. Curt requires a stabilizing strap like part # 18050 to be used for any non-trailer items used in the trailer hitch. If you need a 1-7/8 inch hitch ball I recommend the Euro style drawbar, part # C45571 and for a 2-inch you can use part # C45572. for a trailer wiring harness you can use part #...
  view full answer...
• Trailer Hitch and Wiring for a 2005 Toyota Matrix
  Curt trailer hitch # C12221 would be a good option as long as your 2005 Toyota Matrix is not an XR or XRS model. If it is an XR or XRS model then # C12013 would be the best option for a Curt hitch. These are both Class II hitches which means you have to use the ball mount recommended by the hitch manufacture so as not to void the hitch warranty. This will limit the amount of rise you can get to be able to tow the trailer level. Based on the picture you have sent you will need a good...
  view full answer...
• Trailer Hitch Recommendation for a 2015 Fiat 500L
  Most likely yes, but you would need to consult the owners manual of your 2015 Fiat 500L to determine what the towing capacity/restrictions are. For a hitch you would want the part # C11364, for a ball mount part # C45572 for 2 inch ball, or part # C45571 for 1-7/8 inch ball. For trailer wiring part # C56193.
  view full answer...
• Trailer Hitch and Wiring Recommendation for a 2015 Infiniti Q50
  For your 2015 Infiniti Q50 the Curt hitch part # C11407 has been confirmed as a fit and would work well for you as long as the weight of your trailer when loaded would end up being less than 2,000 lbs total trailer weight and 200 lbs tongue weight. Now you would also need to check the owners manual of the vehicle to determine what the towing capacities are for it and stay under the lesser of the two capacities (hitch and vehicle.) For trailer wiring you would need the # 118672, for a...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?