1. Trailer Hitch Ball Mount
  2. Curt
  3. Fits 1-1/4 Inch Hitch
  4. Fixed Ball Mount
  5. Drop - 1 Inch
  6. Rise - 1 Inch
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs

Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs

Item # C45519
lowest price pledge
Our Price: $40.05
Trailer Hitch Ball Mount
Orders above $99 qualify for Free Shipping
Shipping Weight: 6 lbs
Quantity: 
In Stock
C45519 - Fits 1-1/4 Inch Hitch Curt Trailer Hitch Ball Mount
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Corrosion-resistant ball mount is 9-3/4" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Lowest Prices for the best trailer hitch ball mount from Curt. Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs part number C45519 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (46)
  • Q & A (20)
  • Photos
  • Why etrailer?

Curt Trailer Hitch Ball Mount - C45519

  • Fits 1-1/4 Inch Hitch
  • Fixed Ball Mount
  • Drop - 1 Inch
  • Rise - 1 Inch
  • Curt
  • No Ball
  • Class II
  • 3500 lbs GTW
  • Steel Shank

Corrosion-resistant ball mount is 9-3/4" long and fits 1-1/4" x 1-1/4" trailer hitch receivers.


Features:

  • Sturdy, steel construction
  • Corrosion-resistant, black gloss powder coat finish
  • High-quality manufacturing process
    • CNC machined for strong, consistent cuts and welds
    • 7-Stage washing method delivers smooth, clean surface
  • Both drop and rise positions available to ensure level towing
  • Hitch pin and clip or hitch lock sold separately
  • Assembled in USA


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
    • Class II only
  • Gross towing weight: 3,500 lbs
  • Tongue weight: 350 lbs
  • Ball hole diameter: 3/4"
  • Length: 9-3/4" from center of hitch pin hole to center of ball hole
  • Rise: 3/4" from top of inside of hitch opening
  • Drop: 1-1/4" from top of inside of hitch opening


D-19 45519 Curt Ball Mount - 1-1/4" - Class II






Customer Reviews

Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs - C45519

Average Customer Rating:  4.9 out of 5 stars   (46 Customer Reviews)

Corrosion-resistant ball mount is 9-3/4" long and fits 1-1/4" x 1-1/4" trailer hitch receivers.

- C45519
by:

Great product at a great price. 845385



- C45519
by:

A great USA made product! Customer service was fantastic. Thank you agin. 829038



- C45519
by:

Excellent quality and craftsmanship! 737705



- C45519
by:

extremely well packed ...quick shipping 718621


Comments
Very durable...with my Subaru wagon I have been able to move my tow hauler around the yard with no problems...great value and highly recommended
Dave - 10/19/2020

102327

- C45519
by:

It came just as described. Recommend you put in the description that you need to order a receiver pin too. 705391



- C45519
by:

Arrived very quickly. Packaging somewhat damaged, but not contents. All necessary parts included. Installation videos a must see for proper install. Thanks again etailer! 660105



- C45519
by:

Looks like it will work 505121



- C45519
by:

Solid steel shaft, excellent welds and shipped on time.much better quality than the one I was able to find in local retail store. 494198



- C45519
by:

This is a good online company. Communication is great. Tracking was perfect. Will visit again. 489843



- C45519
by:

My only complaint is that it did not come with a pin and keeper. My fault; I guess I should have read the description more carefully. 452209



- C45519
by:

Perfect. Just what I needed. 448226



- C45519
by:

Works perfect- as advertised 432756



- C45519
by:

I am a repeat etrailer customer due to their quality products, professional service and prompt shipping. A replacement automobile required a drawbar with a lower drop and this one fit the bill perfectly. Thank you to the folks at etrailer for once again "spoiling me". 427944



- C45519
by:

The hitch was well made and the paint was excellent. I liked the links to instructions. I found it easier to remove one muffler than drop the whole exhaust. I did not find good instructions for connecting the wiring but it was a simple easy job. I would like to see suggested kits that include all components to do the job. I calculate it saved me about $100 by doing the job myself. I suggest recommending either antisieze or loctite for the fasteners as both prevent corrosion. 414140



- C45519
by:

I would like to take this time to let you know that I appreciated your very quick service as well as your excellent products. Thanks again and I will be letting my friends know about you in the future. Thanks again, Ed 409378



- C45519
by:

It is what it is 361793


Comments
Everything is working fine.
Neil P - 04/04/2018

36805

- C45519
by:

Not much you can say about a bar with a piece of flat metal welded to it; well made looks good. What is really important is that e-trailer is fast, friendly and knowledgeable. I've ordered from them anytime I needed a trailer/RV part. 324225


Comments
As bullet proof as your fine reputation for parts and service.
JB - 12/12/2017

31766

- C45519
by:

Products are excellent as always. A little slow on delivery this time because of waiting for a back-ordered part. 318054



- C45519
by:

I'm out of town, but hitch was delivered, all is good. Great people to work with. 310862



- C45519
by:

very good product is used on our 1997 gold wing to pull a trailer 291266



- C45519
by:

Well made and was delivered quickly. Works as expected. What more can I say? 266870



- C45519
by:

Works as it should 252026



- C45519
by:

It's a Curt ball mount. Of coarse it's great. Great customer service to go with it. Thanks! 245944



- C45519
by:

etrailer. com excellent hitches and parts with the best customer service ! 242459



- C45519
by:

It's just a drawbar purchased along with a Curt hitch. Works great as it should. Etrailer price and service can't be beat. 231822


25
46
Show More Reviews

Ask the Experts about this Curt Trailer Hitch Ball Mount

  • Recommended Hitch Lock for Curt Drawbar on 2015 Ford Mustang
    To secure and lock the Curt Class II Drawbar # C45519 referenced in your question to your hitch receiver, I recommend the Curt Hitch Lock # C23517. This is a really nice, stainless steel lock that is compatible with this drawbar and your hitch, and will do a great job of helping to deter theft of your valuables. It features an easy-to-operate quarter-turn lock activation and a watertight dust cap that will prevent internal corrosion. 2 keys are included with the product. I have attached...
    view full answer...
  • Can the # C45519 Ball Mount be Used on a 2004 Buick Park Avenue and How Long Should the Drawbar Be
    My fit guides show that your vehicle uses the Draw-Tite Ball Mount, item # 36061, in the rise position only. You would not be able to use this draw bar in the drop position. The manufacturer of the hitch does safety testing that puts the drawbar and ball in the best position, in case of an accident, and we cannot recommend using a draw bar in a different position or with a different rise or drop. We have an FAQ on hitch Classes for you to review, see link. The Draw-Tite Ball Mount, item...
    view full answer...
  • Parts Needed To Tow a Small Boat Trailer With a 2004 Subaru Outback Wagon
    The Curt Trailer Hitch Receiver part # C12270 is a confirmed fit for your 2004 Subaru Outback Wagon and it will work to pull a boat trailer. That said, you will need a few other parts to complete your setup which I have listed for you below. Curt T-Connector Vehicle Wiring Harness part # C55370 Curt Drawbar part # C45519 Curt Pin and Clip part # F-4 Curt 1-7/8" Hitch Ball part # C40001 In regards to installation of the Curt Trailer Hitch Receiver, this is very simple to do yourself...
    view full answer...
  • Will Curt Class I Receiver Hitch # C11272 Fit 2013 Mini Cooper Hardtop With Single Exhaust
    The Curt Class I Receiver Hitch, # C11272, does indeed fit the 2013 Mini Cooper Hardtop with single exhaust, excluding the S Series and Works. I have attached the installation instructions for you. As you will see in the final steps the bumper will have to be trimmed in order to access the hitch receiver. I have also attached a picture pointing out this location. Curt does require the use of Support Straps, # 18050, for all non-trailer loads including bike racks, cargo carriers and...
    view full answer...
  • Is There a Larger Hitch for 2014 Chevy Impala Limited?
    There are a pair of trailer hitches which are confirmed fits for your 2014 Chevrolet Impala Limited, and each are Class II rated, the Draw-Tite, # 36407, or the Curt, # C12252. The receivers on these hitches are each 1-1/4 inches, and the gross trailer weight is 3,500 for each, while their tongue weight is 300 lbs; neither is rated for weight distribution. If you are interested in towing with your Impala, I can recommend a ball mount for your hitch, the Curt # C45519, and the accompanying...
    view full answer...
  • Hitch Recommendation for a 1999 Subaru Outback
    For your 1999 Subaru Outback Wagon you would want the Curt Trailer Hitch Receiver # C12270. I checked with Curt and this is the only hitch we offer that would be confirmed to fit your vehicle. For a ball mount you would want part # C45519, for a 1-7/8 inch hitch ball part # C40001, 2 inch hitch ball # C40018.
    view full answer...
  • Can Lower Center Reverse Light be Installed/Used on a 2004 Mini Cooper After Install Trailer Hitch
    Yes, you should be able to install and use a center light in your 2004 Mini Cooper rear bumper as long as the hitch is not being used. The instruction do specify that if trimming is required on the back of the bumper after installing the hitch, not to cut any piece used to hold the trim cover or light. Meaning that the cover or light can be reinstalled. I have included a link to the installation instructions for you. If you are going to use the hitch for a bike rack or cargo carrier...
    view full answer...
  • Can Heat Shield on 2015 Subaru Forester be Trimmed and Left On Using Curt Class II Trailer Hitch
    Though the instructions call for the removal of the heat shield for Curt hitch # C12100 it is up to you whether or not you want to trim it or not. So yes, you could trim the heat shield if you wanted to on your 2015 Subaru Forester. If you go with this Curt hitch and you will be using it for a bike rack or a cargo carrier then Curt requires the use of stabilization strap # 18050. The Draw-Tite hitch, # 36523, does not have this requirement. If you plan on doing any towing then for...
    view full answer...
  • Recommended Trailer Hitch Receiver and Wiring Harness for 2014 Subaru Forester
    When I put your 2014 Subaru Forester into our fit guide I did not get the same results you did. I get the # C13144 for a 2 inch receiver option and # C12100 as a 1-1/4 inch option. I get the same options when I type this into Curt's fit guide. I'm not sure if we had a glitch or what, but I am confident that either of these hitches I referenced will work well for you. The # C111813 is not a fit for your vehicle and is only a fit for 1993-2002 Toyota Corolla and Geo/Chevy Prizm models....
    view full answer...
  • What is the Towing Capacity of a 2007 to 2010 Mini Cooper S
    The only information I could find on the towing capacity of the Mini Cooper was on the base model (using 2008 as the model year) and that was on MSN Autos. I checked an online copy of the owners manual and cannot confirm the capacity of any models. What I did find for a 2008 base model was a towing capacity of 1,433 pounds. However you will need to speak with a Mini dealer/technician to determine the vehicles capacity as equipped. The Curt trailer hitch # C11130 has a capacity of 2,000...
    view full answer...
  • Correct Ballmount for a 2008 Subaru Outback
    Both Class I and Class II trailer hitches are tested and rated with the specific ball mount for that hitch, therefore the ballmount used must be the one that is recommended by the trailer hitch receiver manufacturer. If your vehicle is equipped with a factory Class I, or Class II I can make the following recommendations based on the manufacturer. Class I or Class II hitch that is manufactured by Curt I recommend the # C45519 ball mount. Class II hitch that is manufactured by...
    view full answer...
  • Trailer Hitch and Wiring for a 1990 Subaru Legacy Wagon
    I checked with Curt and trailer hitch # C12270 fits all models of the 1990 Subaru Legacy including the wagon (even though the instructions state sedan, see link). Ball mount # C45519 is recommend for this hitch. Along with the pin and clip # F-4. . For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring you can use # 119179KIT to add a 4-Way flat connector to the rear of the vehicle.
    view full answer...
  • Ball Mount Recommendation for 1-7/8 Inch Trailer Coupler and 1997 Subaru Legacy Wagon
    The recommended ball mount for trailer hitch # C12270 is # C45519. For a 1-7/8 inch ball use # A-80. Or another option is to use Euro ball mount # C45551.
    view full answer...
  • Will J-Style Kayak Carriers Fit the Bars on Malone XtraLight Trailer # MPG525G
    Yes, your J-Style carriers will fit on the crossbars on the Malone XtraLight Trailer - 58" Crossbars - 11' Long - 275 lbs Item # MPG525G. So no worries! I have linked a video review below of this trailer for you. If your 2014 Subaru Forester does not already have a trailer hitch I recommend Curt trailer hitch # C12100 which will have more than enough capacity for the loaded trailer. For this hitch use ball mount # C45519. You will also need 2 inch ball # C40018. And for trailer wiring...
    view full answer...
  • Can I Retain Spare Tire on 2013 Mini Cooper Coupe with Curt Trailer Hitch
    I spoke with my contact at Curt and he said Curt trailer hitch, part # C11272, will allow you to retain your spare tire under your 2013 Mini Cooper Couple with single exhaust. The spare can be removed with the hitch in place. Curt does require the use of Support Straps, # 18050, for all non-trailer loads including bike racks, cargo carriers and so forth. Failure to properly support these loads will void your hitch warranty from Curt. If you plan to do some light towing you may also...
    view full answer...
  • Trailer Hitch and Wiring Fits for 2003 Subaru Legacy Brighton Wagon
    In reference to the 2003 Subaru Legacy, the term "Brighton" refers to a trim level for the Legacy that was offered in the U.S. We do offer two options in a 1-1/4-inch Class II hitch for both the sedan and wagon versions, both of which are shown on the linked page, Draw-Tite # 36284 and Curt # C12270. I suggest the Curt hitch since it offers a lower price and a higher tongue weight capacity of 350-lbs versus 300-lbs for the Draw-Tite. My technical contact at Curt confirmed that the Brighton...
    view full answer...
  • Installing a Trailer Hitch on a 1993 Subaru Legacy
    You will at the very least need a 1/2 inch wrench and a torque wrench that is good for 110 foot pounds. It is important to get the bolts to the proper torque rating. If they are too loose you could lose the hitch. Too tight and you could damage the hitch or your 1993 Subaru Legacy. Most auto parts stores can loan out any tools you might need. You should not have to have the car on a lift to install it. lying on the ground would likely be fine. Some people who want more space would...
    view full answer...
  • Trailer Hitch and Wiring for a 2005 Subaru Legacy Wagon, Outback Model
    After doing a little searching I was able to determine that Curt trailer hitch # C12284 will fit a 2005 Subaru Legacy Wagon, Including Outback Wagons. None of the other hitches are confirmed to fit. The correct ball mount to use is # C45519. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For a trailer wiring harness use # 118461.
    view full answer...
  • 2013 Mini Cooper Hardtop Trailer Hitch Fit Recommendation
    For your wife's 2013 Mini Cooper that has a hardtop and a single exhaust the Curt hitch part # C11272 that you referenced is the correct hitch to use. If you plan on doing a bit of towing you may also need the following: Curt Powered Converter with Wiring Kit, # C59236, which provides a 4-way connector at the back of the vehicle. Ball Mount # C45519 Hitch Ball # C40001 for 1-7/8" and # C40018 for 2"
    view full answer...
  • Interchangeable Ball Set for a Curt Class I Trailer Hitch and Ball Mount for a 2008 Mini Cooper S
    The Curt trailer hitch for a 2009 Mini Cooper S is # C11130. Like you said, the recommended ball mount, part # C45519, requires that the ball have a 3/4 inch diameter and medium length shank. The Tow Ready Interchangeable Hitch Ball Set, # 63802, that you have referenced has a 1 inch diameter shank and does not fit. For a ball set that will fit you want to use # 63801. The shank is 3/4 inch diameter and 2-1/4 inches long which would be perfect for the ball mount. I have linked instructions...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Lindsey S
Expert Research:
Robert G
Expert Research:
Reno H
Updated by:
Adele M
Updated by:
Kristina F
Updated by:
Isabelle B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.