1. Trailer Hitch Ball Mount
  2. Curt
  3. Fixed Ball Mount
  4. Fits 2 Inch Hitch
  5. Drop - 6 Inch
  6. Rise - 4 Inch
Curt Ball Mount for 2" Hitches - 4-1/4" Rise, 5-3/4" Drop - Angled Shank - 7,500 lbs

Curt Ball Mount for 2" Hitches - 4-1/4" Rise, 5-3/4" Drop - Angled Shank - 7,500 lbs

Item # C45087
lowest price pledge
Retail:$63.12
Our Price: $44.23
You Save: 30%
Trailer Hitch Ball Mount
Orders above $99 qualify for Free Shipping
Shipping Weight: 9 lbs
Quantity: 
Trailer Hitch Ball Mount C45087 - Drop - 6 Inch,Rise - 4 Inch - Curt
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Corrosion-resistant, black powder coated ball mount measures 12-1/4" from center of hitch pin hole to center of ball hole. Angled shank is easy to insert into the receiver. For use in drop or rise position. Hitch pin and clip sold separately. Lowest Prices for the best trailer hitch ball mount from Curt. Curt Ball Mount for 2" Hitches - 4-1/4" Rise, 5-3/4" Drop - Angled Shank - 7,500 lbs part number C45087 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (12)
  • Q & A (15)
  • Photos
  • Why etrailer?

Curt Trailer Hitch Ball Mount - C45087

  • Fixed Ball Mount
  • Fits 2 Inch Hitch
  • Drop - 6 Inch
  • Rise - 4 Inch
  • Curt
  • No Ball
  • Class III
  • 7500 lbs GTW
  • Long Shank
  • Steel Shank

Corrosion-resistant, black powder coated ball mount measures 12-1/4" from center of hitch pin hole to center of ball hole. Angled shank is easy to insert into the receiver. For use in drop or rise position. Hitch pin and clip sold separately.


Features:

  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Both drop and rise positions available to ensure level towing
  • Angled shank makes it easy to insert ball mount into hitch receiver
  • Sturdy steel construction
  • Corrosion-resistant, high-gloss black powder coat finish
  • Hitch pin and clip or hitch lock sold separately
  • Assembled in the USA


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Length: 12-1/4" From center of hitch pin hole to center of ball hole
    • 6" From center of hitch pin hole to closest point of support brace
  • Rise: 4-1/4" from top of inside of hitch opening
    • Gross towing weight: 6,000 lbs
    • Tongue weight: 600 lbs
  • Drop: 5-3/4" from top of inside of hitch opening
    • Gross towing weight: 7,500 lbs
    • Tongue weight: 750 lbs
  • Ball hole diameter: 1"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty


45087 Curt Class 3 Ball Mount - Standard Duty 2" Right-Angle Ball Mount - 4-1/2" Rise, 5-3/4" Drop






Customer Reviews

Curt Ball Mount for 2" Hitches - 4-1/4" Rise, 5-3/4" Drop - Angled Shank - 7,500 lbs - C45087

Average Customer Rating:  5.0 out of 5 stars   (12 Customer Reviews)

Corrosion-resistant, black powder coated ball mount measures 12-1/4" from center of hitch pin hole to center of ball hole. Angled shank is easy to insert into the receiver. For use in drop or rise position. Hitch pin and clip sold separately.

- C45087
by:

Items were just what I needed. 693093



- C45087
by:

Exactly what was needed to level off our trailer. Solidly made and should last a long time. 674654



- C45087
by:

Worked as advertised on my 2014 Honda Pilot, no problems. 594720



- C45087
by:

After taking the time to carefully measure my Draw-Tite 75742 receiver height, this Curt ball mount is perfect for towing all rental trailers. The 4.25" rise permits towing rental trailers that are absolutely level, providing virtually no loss of CR-V steering or trailer swaying when driving at highway speeds. I did my measuring homework, with the help of online videos, and ended up with the perfect towing capability for my 2014 Honda CR-V using this ball mount and Draw-Tite 75742 Class III receiver. 568700



- C45087
by:

Exact drop I needed! Good quality! 526710


Comments
A year later and it still does the job.
Jeff W - 06/25/2019

57079

- C45087
by:

This was an addition to a previous purchase of hitch, four and 7 was connectors and electronic breaks. Etrailer delivery is the best and fastest. Their videos and online help makes the project a snap. Everything went according to the video and instructions without a problem. I have used them before and would not use any other vendor. 494859



- C45087
by:

I found etrailer to have a great selection and service. I really appreciated the product use videos which helped insure I selected the proper size hitch for my vehicle. I received the product quickly in just a few days. I use two trailers requiring a different size hitch ball of 1-7/8 and 2 inches. I am looking forward to being able to switch the set-up with the Convert-A-Ball in just a few seconds without having to use wrenches. 364048



- C45087
by:

KICK A** 335107


Comments
All work well! No problems. Good products. Thanks for checking!
MAGNUM - 01/26/2018

33721

- C45087
by:

Perfect product and super fast shipping. Always a pleasure to do business with e-trailer. On line when it is simple and by phone when it is a little more complex. They have been very knowledgable and helpful to me about all things trailer related. 265916



- C45087
by:

Great product. Still using it with zero problems. Powder coat is holding up well. 249945



- C45087
by:

Fair price. Very happy with quick deliv ery. 212924



- C45087
by:

Quick service. Hitch is as advertised. My third from e-trailer. 204205


12
12

Ask the Experts about this Curt Trailer Hitch Ball Mount

  • 2-5/16 inch Ball Recommendation with Curt Ball Mount # C45087
    For a 2-5/16 inch ball to fit the Curt ball mount part # C45087 that you referenced you would want the part # 63847 along with the ball mount. We can't mount them here though.
    view full answer...
  • Will Installed Trailer Hitch Block Hands-Free Liftgate Feature on 2019 Ford Edge
    Actually, all of the hitches available for the 2019 Ford Edge, regardless of trim level will have the sensors for the Hands-Free liftgate feature blocked at the middle of the bumper. This is because the receiver tube extends below the bumper and would sit between where you'd sweep your foot and the liftgate sensor. The system uses 3 or 4 sensors (depends on the vehicle) and the sensors will still pick up movement but you'll need to sweep your foot to the left or right of the center of the...
    view full answer...
  • Recommended Hitch For Carrying Bike Rack on 2020 Subaru Ascent
    I'd recommend going with a concealed option like the # 76253 from Draw-Tite. When the hitch isn't needed, it'll be completely concealed behind the center panel in the rear bumper cover. Many folks don't care for the appearance of a trailer hitch such as the Curt # C13400 which will be fully visible below the rear bumper. If there's a chance you might use the hitch for towing purposes some time in the future, you'd need a few other items to complete your towing system. For a trailer wiring...
    view full answer...
  • Will Installing Trailer Hitch on 2019 Ford Edge Titanium Stop Hands-Free Liftgate From Working
    Once installed, the Draw-Tite Class III # 75234 receiver hitch will slightly limit the areas under the bumper where the hands-free liftgate sensors can 'read' your foot passing under the bumper. The square receiver tube will block access in the middle of the under-bumper area, but the sensors will read just fine off to either side. The hitch will work great on your vehicle, and be pretty inconspicuous as well. Most of the hitch is hidden behind the rear bumper fascia, so the only visible...
    view full answer...
  • Differences Between Available Class III Hitch Options for 2020 Honda Odyssey
    Both hitches would share the same 525 lb tongue weight/3500 lb towing GTW towing capacity, but the similarities would end there. The Draw-Tite # 76170 is a concealed design, meaning that the majority of the hitch would be concealed behind the Odyssey's bumper when the hitch is installed with just the receiver and safety chain loops being visible. Because of the concealed design, the bumper cover would need removal to install the hitch and would be reinstalled afterward. The Curt # C13370...
    view full answer...
  • Trailer Hitch and Trailer Wiring Harness Recommendation for 2020 Toyota RAV4 Adventure
    The two hitches available for your 2020 Toyota RAV4, the Curt # C13416 and Draw-Tite # 76201 are just about identical visually with very similar capacities. They would install in the same manner with similar procedures. Both hitches are pretty much on par with each other quality-wise, but the Curt powder coat typically looks a little better and is a bit more durable over time than that of the Draw-Tite # 76201. If I had to choose, I'd go with the Curt model but you could choose either without...
    view full answer...
  • No Drill Class III Trailer Hitch Fit for 2019 Ford Edge SEL
    According to Draw-Tite, the # 75234 Class III hitch is a fit for all models of the 2019 Ford Edge with the exception of the Titanium model. This is a no-drill installation, but one small stud on the underside of the vehicle above the muffler will need to be cut off using a Dremel tool or die grinder. I've linked you to the installation instructions and an installation video showing the hitch being installed on a 2018 Edge. If you'll be towing with the hitch, you'll need a trailer wiring...
    view full answer...
  • Recommended Longer Ball Mount for a Larger Turning Clearance on a 2013 Ford F-53
    I do have a longer ball mount for you. The Curt Ball Mount with a 4" Rise and 6" Drop # D-28 is 14-1/4" long from the center of the pin hole to the center of the ball hole. This ball mount will fit in 2" hitch receivers and is rated for up to 6,000 lbs GTW and 600 lbs. TW. I attached a review video of this ball mount you may want to check out. If you are looking for a longer ball mount that is rated for more weight, you will only be able to use a ball mount that extends 12" or 13" long...
    view full answer...
  • Easy to Install Trailer Hitch for 2020 Toyota RAV4
    The Curt Class III hitch, part # C13416 is the easiest to install hitch we offer for your RAV4. The majority of the hitch will be concealed behind the bumper, which many folks seem to prefer. If you'll be towing with the hitch, you'll need a couple of more items to complete your towing setup. For a trailer wiring harness, use # 118801. For a ball mount, go with # C45087 and # 19261 for a 1-7/8 inch trailer ball or # 63845 for a 2 inch trailer ball. The # 36675 Draw-Tite Class II hitch...
    view full answer...
  • Least Visible Hitches Available for 2020 Toyota Sienna
    We have a couple of options for your 2020 Sienna that feature a concealed cross tube. This means that the only portion of the hitch that will be visible is the receiver tube and the safety chain loops, the cross tube will be hidden behind the bumper fascia. I'd recommend the etrailer.com brand Class III hitch, part # e98853, as it's assembled in the USA. If you look at the photo I've provided, you can compare how the concealed and non-concealed hitches appear on the vehicle. If you'll...
    view full answer...
  • Recommended Trailer Hitch and Towing Accessories for 2019 Volvo XC90
    There sure is! You'll want to go with the Draw-Tite # 76194 that you'd looked it, which is the correct fit. Once installed, the hitch will be almost completely concealed behind the bumper cover, the only things visible will be the receiver tube and the safety chain loops. If you'll be towing with the hitch, you'll need a wiring harness, a ball mount and the properly sized trailer ball to complete your towing setup. For wiring, go with part # 118683 For ball mount, part # C45087 For...
    view full answer...
  • Class III Trailer Hitch Fit for 2006 Dodge Caravan Without Stow and Go Seats
    Although we do indeed have hitches that will fit your 2006 Dodge Caravan, the # 13037 you'd mentioned only fits the 2nd generation vehicle (1991-1995). For your 4th generation 2006 Caravan, I'd recommend the Draw-Tite Class III receiver hitch, part # 75119 which you can see being installed by clicking the provided video link. If you'll be towing with the hitch, you'll also need a # 118300 trailer wiring harness (video also linked), a ball mount like # C45087 and for a 1-7/8 inch trailer...
    view full answer...
  • Differences Between Curt and Draw-Tite Hitches Available for 2020 Toyota RAV4
    In just about every respect, both hitches are identical. The only major difference is that the Draw-Tite offers a 75 lb higher tongue weight capacity. (You'd still need to abide by the towing capacities set forth by Toyota in the owner's manual). Because the hitches are so similar in appearance, installation procedure, build quality and capacity you can't go wrong with either hitch option. You can choose the less expensive option and not feel like you've sacrificed anything. If you...
    view full answer...
  • Trailer Hitch and Wiring Setup for 2020 Toyota RAV4 Adventure Series
    According to Curt, their # C13416 Class III hitch is compatible with all models of the 2020 Toyota RAV4, including the Adventure series. If you'll be towing with your RAV4, you'll need a few other items to complete your setup. For a trailer wiring harness, use # 118801. For a ball mount use # C45087 and # 19261 for a 1-7/8 inch trailer ball or # 63845 for a 2 inch. I've linked you to install videos for the hitch and the trailer wiring harness.
    view full answer...
  • Hitch Fit, Towing Accessories and Included Install Hardware for 2020 Toyota Rav 4
    The Curt Class III 2 inch receiver you refer to, part # C13146 is indeed a fit for the 2020 Toyota Rav4. All the hardware necessary for installation is included. If you'll be towing with your RAV4, you'll need a wiring harness, a ball mount and a trailer ball to complete your towing system. For a wiring harness, you'll need # 118801 which installs according to the video I've linked for you. For a ball mount, the # C45087 would put your trailer ball right at about 16 inches tall, which...
    view full answer...

Do you have a question about this Trailer Hitch Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Jacob T
Video by:
Dustin K
Written by:
Chelsea B
Updated by:
Sarah W
Updated by:
Isabelle B
Installed by:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-8924