1. Trailer Fenders
  2. Redline
  3. 14 Inch Wheels
  4. 15 Inch Wheels
  5. Steel
  6. 32 Inch Long
Single Axle Trailer Fender - 16 Gauge Steel - 14" to 15" Wheels - Qty 1

Single Axle Trailer Fender - 16 Gauge Steel - 14" to 15" Wheels - Qty 1

Item # F9X32-1R
lowest price pledge
Our Price: $36.74
Trailer Fenders
Orders above $99 qualify for Free Shipping
Shipping Weight: 8 lbs
Quantity: 
In Stock, Ships Today
F9X32-1R - 14 Inch Wheels,15 Inch Wheels Redline Trailer Fenders
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

9" Wide x 32" long x 15" tall. This 16-gauge steel fender is an application for 14-15" wheels on single-axle trailers. The fender has a 1" radius lip on the front and a 90-degree-angled back for flush mounting. Lowest Prices for the best trailer fenders from Redline. Single Axle Trailer Fender - 16 Gauge Steel - 14" to 15" Wheels - Qty 1 part number F9X32-1R can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (113)
  • Q & A (10)
  • Videos (2)
  • Photos
  • Why etrailer?

Redline Trailer Fenders - F9X32-1R

  • 14 Inch Wheels
  • 15 Inch Wheels
  • Steel
  • 32 Inch Long
  • Weld-On
  • Silver
  • Redline
  • No Step
  • For Single-Axle Trailers

9" Wide x 32" long x 15" tall. This 16-gauge steel fender is an application for 14-15" wheels on single-axle trailers. The fender has a 1" radius lip on the front and a 90-degree-angled back for flush mounting.


Features:

  • Weld-on or bolt-on application
    • Drilling required for bolt-on
    • Mounting hardware sold separately
  • 1" Radius lip on front and back of fender
  • 90-Degree angle on back for mounting onto trailer
  • 16-Gauge steel construction
  • Made in the USA


Specs:

  • Application: single-axle trailers with 14" - 15" diameter wheels
  • Dimensions: 9" wide x 32" long x 15" tall
  • Qty: 1 fender


F9X32-1R 16-Gauge Steel, Single-Axle Trailer Fender - 9" Wide - 14"-15" Tires







Video of Single Axle Trailer Fender - 16 Gauge Steel - 14" to 15" Wheels - Qty 1

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Redline Single Axle Trailer Fender Installation

Today on our trailer were going to be replacing an old or missing fender. Well be using the new redline single axle trailer fender part number F9X32-1R for 14 to 15 inch wheels. Now because the older original fender is already missing, well go ahead and take our fender and set it into position. Then well measure from the end of each fender to the bottom of the trailer to make sure the fender is centered on the tire. Now weve got our location marked, well go ahead and remove the wheel for easy access to secure it. Well now go ahead and set the fender back into position and then get an extra hand to help with hold it into position while we use the self tapping screws to secure it. Note, well be screwing into the steel support structure underneath the sheath metal siding.

On some applications, it may be necessary to do a small pilot hole or pre-drill hole to make sure that youre going into the steel structure. For this application, Im going to sure a minimum of 4 fasteners since were going into structure on all 4. Its now secured and were ready to re-install the wheel. Once weve tightened it down, well go ahead and torque the wheel and now were ready to hit the road. That does it for the install the redline single axle trailer fender for 14 to 15 inch wheels part number F9X32-1R. .


Customer Reviews

Single Axle Trailer Fender - 16 Gauge Steel - 14" to 15" Wheels - Qty 1 - F9X32-1R

Average Customer Rating:  4.8 out of 5 stars   (113 Customer Reviews)

9" Wide x 32" long x 15" tall. This 16-gauge steel fender is an application for 14-15" wheels on single-axle trailers. The fender has a 1" radius lip on the front and a 90-degree-angled back for flush mounting.

- F9X32-1R
by:

Product is great, just as discriped. Service outstanding, ordered early Friday afternoon shipped late Friday, received Wednesday late morning. Thank You George. Shipping 1/4 the of competitors making overall costs cheaper. Thank you etrailer 338236



- F9X32-1R
by:

have ordered several of these fenders. they work out great for my trike building. thanks etrailer. 247807



- F9X32-1R
by:

Delivered as promised, nice unit 330815


Comments
Thanks for the follow up on the fenders. ACTUALLY they were a means to a different end. I had wanted to add stone guards to my car, and rather than start from scratch with lots of metal work and bending I opted to start 3/4 of the way there. A bit more metal work for contour and shape, some metal finishing and then plating they came to be as attached. Not sure this will help you sell any, but it helped me alot
Tim - 01/09/2018

32818

- F9X32-1R
by:

Easy to order from and fast service 730992



- F9X32-1R
by:

product was as described, but a little rusty, but being steel that was ok. 708318



- F9X32-1R
by:

I just received my new fenders and they are just right and you can't beat the price. Thank you so much 672526



- F9X32-1R
by:

FINISH WORK IS GOOD 643039



- F9X32-1R
by:

So far so good, a good fender. 642791



- F9X32-1R
by:

Wow. The product arrived much quicker than I expected. The fenders are awesome, very sturdy. Highly recommend the company and their products. 620339



- F9X32-1R
by:

Appears as advertised. Priced right. 615390



- F9X32-1R
by:

I received my product very quickly and it was exactly what I expected, very happy customer!! 614417



- F9X32-1R
by:

Ordered Fenders, lug nuts and wiring harness for my trailer. All arrived in a timely manner and fit perfectly! 601965



- F9X32-1R
by:

Great service. Fast delivery. Thank you. 578867



- F9X32-1R
by:

Fenders are perfect - just as represented on the website, delivered as promised. Couldn't be happier! 561613



- F9X32-1R
by:

Shipment was in transit on day it was ordered, arrived two days later, well packed, no damage. One comment, someone who packaged for etrailer must have a brother who sells heavy-duty staples for closing shipping boxes closed, staples secured the shipping box every inch and a half or so. Refreshing not to have box broken open, parts damaged or missing, etc. 544696



- F9X32-1R
by:

I use these fenders regularly and like them. Good quality. 527523



- F9X32-1R
by:

Great products, wide selection, good prices .. great value delivered very timely! Do yourself and your friends a favor - remember and save the link .. www.etrailer.com! 527032



- F9X32-1R
by:

Nicely formed fenders, great price, easy to work with 516474



- F9X32-1R
by:

good fender, fits well. THX 512017



- F9X32-1R
by:

Very impressed with this company. Quality product, faster than expected delivery and great communication. 498685


Comments
Im using these fenders for the inner part of the wheel tubs on my current project. They have worked out better than expected. The heavy gauge steel was exactly what I needed.
Tom N - 05/02/2019

54782

- F9X32-1R
by:

Good quality. 497302



- F9X32-1R
by:

I installed bigger tires on a single axle trailer and that required different fenders. I was pleased with the end product and the etrailer folks were great to work with. 497081



- F9X32-1R
by:

Easy to order with specs on line. Great price and arrived quickly without additional costs. I recommend etrailer.com highly!! 472854



- F9X32-1R
by:

Good Fenders. I undercoated the fenders before painting. 471639



- F9X32-1R
by:

Just as promised 471533


26
117
Show More Reviews

Ask the Experts about this Redline Trailer Fenders

  • How To Measure a Boat Trailer Fender Without Removing the Wheel
    I can understand that if your boat is loaded on the trailer, you don't want to remove one of the wheels to measure the fenders. Measuring a fender with the tire still mounted can be tricky, but it's not impossible. I've provided a diagram that should be helpful. You already know how to measure the width. To get the length it is easiest to tape a piece of stiff paper to the end of each fender edge that will protrude past the wheel. Then measure between the papers. For the height, you can...
    view full answer...
  • Availability of Fender Back Plate for 32 Inch Long Fender
    We offer 2 options for fender back plates. For a back plate closest to the measurements you provided, the Pre-Cut Fender Back # 10FB-32R measures 10-1/2 inches wide x 29-3/4 inches long. This fender back is designed to fit the Redline Fender # F9X32-1R. For a wider fender back, the # 12FB-32R measures 12 inches wide x 30 inches long. This fender back is also designed for the # F9X32-1R fender. Either of these fender backs will also work in a 10-3/4 inches wide x 32 inches long fender...
    view full answer...
  • Availability of 33 Inch x 10 Inch x 18 Inch Trailer Fender
    The closest trailer fender we have available to the dimensions you mentioned is a Jeep Style Fender like the Redline # J101733AT. This aluminum fender is 33 inches long, 10 inches wide and 17 inches tall. It is designed to fit with 13-15 inch wheels and can be installed as a bolt-on or weld-on application. For a standard fender, the closest option we have is the Redline Single Axle Fender # F9X32-1R. This is a 16-gauge steel fender that is 32 inches long, 9 inches wide, and 15 inches...
    view full answer...
  • Fender Recommendation for a Bantam Trailer
    I am not very familiar with the tire size 16-6.00, however, I am familiar with the older agricultural tire size 600 x 16. Typically, you will want to choose a fender based on the size of your wheel. If you have 16 inch wheels, then we have 2 fenders that will fit that size. The Redline Single-Axle Fenders, part # F13X36-1R, and part # F1075X36-1R. The main difference between these two fenders is the width. Part # F13X36-1R has a width of 13 inches and part # F1075X36-1R has a width...
    view full answer...
  • Pre-Cut Fender Back for Redline Trailer Fender
    The Pre-Cut Fender Back # 12FB-32R is made of 16 to 18 gauge material; so there are not some that are 16 gauge and some that are 18 gauge. This fender back, which is designed for Redline Trailer Fender # F9X32-1R, has varying thicknesses between 0.048" to 0.057" which is why there is varying gauges listed.
    view full answer...
  • Can Metal Trailer Fender be Painted to Prevent Rust
    Trailer fender # F9X32-1R is made of raw steel and isn't really treated for corrosion resistance so painting it would definitely help to reduce the chance and spread of corrosion.
    view full answer...
  • Fender Needed for a tire that is 27 Inches Tall and 12-1/4 Inches Wide
    The 16-Gauge Steel, Single-Axle Trailer Fender w/ Backing, item # F9X32-1RWB, that you mentioned would be large enough for the 27 inch tall dimension you gave, since most 15 inch tires are just over 27 inches tall, but the width of your tire would require that you get a much wider fender. We do not have a fender that is 12-1/4 inches wide but you could use the fender you mentioned, cut off the rolled lip on the outside of the fender, and then use a # F9X32-1R fender without back, cut...
    view full answer...
  • Looking for Replacement Steel Fenders
    I have looked through the various steel trailer fenders we offer, and have not found any that match the exact measurements you provided. The closest fender I found was the CE Smith Pre-Galvanized Steel Fender, part # CE17701G. This fender measures 23-1/2 long by 7-1/16 inches wide by 6-1/2 inches tall (see photo).
    view full answer...
  • Coupler and Tire Size on 50s Era Bantam Utility Trailer
    A trailer coupler will often be stamped to indicate the compatible ball size but on an older 50s-era trailer there's no guarantee this is there or that it is still visible after all those years. Hitch balls offered nowadays include five different sizes but a small utility trailer such as a 50s Bantam is likely to use one of the smallest sizes, either a 1-7/8-inch like # 19256 or perhaps a 50mm size like # 63912. Note that you also need to match the hitch ball shank size to the ball...
    view full answer...
  • Is the 16-Gauge Steel, Single-Axle Trailer Fender Sold in Pairs or Singles
    For the 16-Gauge Steel, Single-Axle Trailer Fender, # F9X32-1R, they are sold in quantities of 1. For a pair you would need to put a 2 in the quantity box.
    view full answer...

Do you have a question about this Trailer Fender?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer fenders for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer fender information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
John H
Expert Research:
Adam R
Video by:
Andrew K
Installed by:
Jeff D
Installed by:
Nicholas E
Updated by:
Adele M
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.