Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.
/
Redline/
14 Inch Wheels, 15 Inch Wheels/
Steel/
32 Inch Long/
No StepItem # F1075X32-1R
Our Price: $25.04
Orders above $99 qualify for free shipping
10-3/4" Wide x 32" long x 15-1/4" tall. This 16-gauge steel fender is a weld-on application for 14-15" wheels. The fender has a 1" radius lip on the front and a 90-degree-angled back for flush mounting.
Features:
Specs:
Customers compare F1075X32-1R to these similar products
Customers Who Purchased This Trailer Fenders Also Bought...
Video of Single Axle Trailer Fender - 16 Gauge Steel - 14" to 15" Wheels - Qty 1
Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.
Today were going to review part #: F1075X32-1R. This is the Redline trailer fender. This is a 16 gauge steel construction fender. This is designed to be used on a single axle trailer with 14 or 15 inch tires. This part #: is a quantity of one fender. It is a weld-on application.
Does have a one inch radius lip on the front of the fender. On the back of the fender is a 90 degree angle back and thats allowing for flush mounting onto your trailer. This part is made in the USA. I just want to give you a few dimensions on here. The overall width on this is going to be right at 32 inches wide.
The height is going to be 15 and a quarter inches tall. The width of the fender, Im going to set that down here. Overall width is going to be right at 10 and three quarter inches wide. That should do it for the review on part #: F1075X32-1R, the Redline trailer fender for single axle trailers with 14 or 15 inch tires.
Average Customer Rating: 4.8 out of 5 stars (152 Customer Reviews)
10-3/4" Wide x 32" long x 15-1/4" tall. This 16-gauge steel fender is a weld-on application for 14-15" wheels. The fender has a 1" radius lip on the front and a 90-degree-angled back for flush mounting.by: Rich B.07/09/2012
These fenders are excellent. The stamping and finish is perfect. They arrived at my house well packaged and damage free. I bought these as an alternative to finding NOS fenders for a 1946 Bantam Jeep trailer I am restoring. They are 2 inches wider than the originals but that's a good thing since I can run more modern wheels and tires without them sticking out of the fenders. Otherwise they are exactly the same as the original fenders except stronger due to the lip on the body side of the fenders. I am very pleased with my purchase and the service I received from etrailer. 47297
by: Greg07/05/2013
Very happy. Sturdy fender with an ample lip for attaching hardware. I trimmed it a little and used it for a hot rod jeep with a fabricated bed. Great part, would (will) use again. 87842
Any more info on your killer little rig, er, I mean, your fender installation? wink wink?
-- comment by: Robert - 06/19/2014Still very happy with the fenders, and etrailer in general. Great supplier.
Greg - 07/05/2014by: Teriann Shrum08/19/2014
We received your parcel in great shipping order and we are very thrilled with everything. You saved us a lot of money as we had an old home built trailer that was loaned to another and they wrecked the trailer. Because you offer all that we need in parts to repair this trailer AND at a price we can afford, you have set in motion the ability for us to regain the use of the trailer we had to dismantle. My husband was happy he located you online. We are waiting for cooler weather to do all the welding necessary and I promise to send you photos as we work on the trailer. Wish I had one of it before we dismantled it so you could have a before and after, but I will send the dismantled trailer and pictures of eTrailer's new parts so that everyone can see what a wonderful service you are offering. My husband has already been bragging at work about what he saved and as I control the budget here so he can work without worry, THANK YOU for offering me help in keeping the costs down. 147365
by: Bill M.11/06/2014
I needed to replace the beat up fenders on our tow dolly, so I searched on line and found trailer had exactly what I was looking for. This product is very well made, smooth and without scratches or blemishes. It was packaged in the toughest box I have ever seen, but it protected it very well. The price couldn't be beat, and it arrived in just a couple of days. And best of all, it's made right here in the U.S.A! 159679
These things are so tough you can stand on them, working great.
Bill M - 11/06/2015by: Dean C03/02/2017
I will qualify right from the start, this is not just a product review. This is a review of my overall experience with etrailer. Let's just say my order had some shipping issues that delayed it. I had to have the fenders for my trailer asap. After discussing the issue I had with my order, the members of the etrailer team responded. In a very positive way! Michelle S worked to get my order expedited and I received my fenders on time, undamaged and looking great! Thanks Michelle! I dont judge a company by just the product it sells, I judge a company by it's products and customer service. Let's just say I was thrilled to get the fenders fast and thrilled they fit and looked great installed. Etrailer staff you earned a customer for life! 347610
by: R H01/24/2014
I received my fenders as promised in perfect condition Thanks to all that were involved with this purchase , Answering all my questions and the follow up on my order. Will use your products and service again as needed. 114661
The fenders are just fine , no problems with the fit and just what I was looking for ,They took a good coat of paint and look good still.Thanks
R H - 01/24/2015by: Gary Cooper04/23/2014
Very happy with my purchase. Fenders fit very well with No modification. I welded them right in place and the inside bend is just the perfect size. Would recommend. 126731
They have held up great. Very sturdy construction and look good even after being on for a year.
Gary C - 04/24/2015by: Dennis C.10/29/2012
I haven't had a chane to install them yet , but they look better than what I expected . I'm sure they will work just fine . 58350
The fenders fit just fine on my little trailer , no problems , quality product .
Dennis C - 04/29/2014by: mike06/18/2014
Fenders are heavy duty and very nice easy to install 136248
I have been very satisfied with all the products that I have purchased from your store . and thanks for asking
mike - 06/24/2015by: Jon H.06/09/2012
Ordered the product, got here in 4 days, and will be putting them on the Teardrop Trailer today. Highly recommend Etrailer to my DIY customers and have used it about 10 times myself, very satisfied. 43470
by: Himmy11/30/2016
I ordered this fender as it was the only one I could find that was wide enough. The fender has one straight 90degree side. I would have preferred the rounded edge on both sides but with the width issue it will do. The edge with the 90 is a little wavie and since it will be exposed it's a little bothersum. I cut it in half to make two short fenders. It looks like it's gonna work 321074
by: Frank D01/18/2013
These etrailer fenders i purchased were definitely excellent(my rating) as described online. they are made of high quality steel and delivered without a dent or scratch. i purchased them for use on my 'trike' motorcycle and with the help of an 'etrailer' representative over the phone my product(fenders) got delivered promptly and fit like a glove. I couldnt be happier with 'etrailer' or my product. gotta go now... goin ridin with my new etrailer fenders on. thanks 'etrailer'! 63458
by: Digital11/18/2016
These fenders came in the condition I had hoped: well-packaged, no dents or scratches and no rust anywhere on both pieces. The only thing I can say that would be a "con" is that the "flat" 90 degree lip used to fasten to the trailer is not flat, but is actually wavy from the bending / manufacturing process. This isn't a critical issue by any means but it would be nice to have that detail shown in the product photos. Otherwise, great product for the price! 317791
by: John W.02/28/2012
A couple shots of what I used the fenders for. 32709
by: Matt M.07/09/2013
I purchased the 10.75" x 32" fenders from etrailer after finding their price with shipping to be cheaper than comparable items available on ebay. The customer service was very informative, with emails being sent at each stage of order processing. The fenders arrived in excellent condition and are constructed of a heavy gage steel. The fenders were the appropriate size, brand new and had no damge from shipping and handling. 88562
by: Andy B.11/24/2014
These fenders are solidly made and with a little trimming in overall length will fit my application (see photo). Items were well packaged and arrived within a few short days of ordering. 162362
by: Jusitn B.08/19/2013
I ordered these fenders because they were the closest I could find to replace the OEM plastic fenders on my camper trailer (one was destroyed after a tire blowout. These will require a little fabrication, but I knew that when I ordered them. They are exactly the width I needed, and at 1/4 the price of a replacement OEM plastic fender, these are perfect! 95776
by: Charlie Glenn06/27/2013
I am well satisfied with the new fenders I bought for my old boat trailer I couldn't believe how fast they were shipped to me These fenders were suppose to be welded on but I drilled a few holes and bolted them on just like the old ones I took off Great product for the price I am sold on this product Thank You Charlie Glenn 86441
by: Steve V01/13/2012
I have been searching for sometime for this size trailer fender it is exactly what I needed. I am extreamly happy that I found your web-site. Upon ordering it was shipped within 24 hours and this was a weekend. I beleive I received it within 4 days. Thank you for your prompt service. I highly recommend your site. Steve V Columbus Ohio 29607
by: Chris R.08/17/2016
Fender worked like I needed it to. I cut the fender in half to make two shorty fenders for my kayak trailer. They work great! 284530
by: Greg D.04/20/2017
Well made product, I purchased a set to replace a fender that was lost during a tire failure. The inner flange had ample room to rivet the fender to the body of the trailer. It arrived damage free, ready to prime and paint. The finished product matched well enough I only replaced the one. Great value for a quality component. 369788
by: Jerry E.06/16/2013
Great looking fender. Cleaned the fenders and sanded them, 2 coats of primer and 3 coats of paint. Problem is that they now look better than the rest of the old trailer. Suppose I will have to paint the trailer now. Thanks for the timely manner of shippinng and the service and not forgetting the price. Two thumbs up. 84868
by: Alex M.06/18/2012
Customer service was out of this world. I knew what was going on without even asking. Very friendly staff and very helpful with everything! Thank you so much for saving me some money on the fender (it looks great) and for all the friendly customer service. Would definitely do business with etrailer again. 44615
by: Keith05/11/2016
This product is of high quality. I used these fenders not as they were intended. These steel fenders make a perfect mini-tub for my 1971 Datsun 510 race car that I am building. By carefully sectioning the fenders, I was able to quickly produce a wheel well for the race car. Would definitely buy again. 249747
by: Mike G07/20/2013
I ordered Friday 10 pm, they shipped Saturday am, had them by thursday, well built fenders at a good price 90617
by: Nathan L01/04/2011
Perfect fit!!!! Awesome price. Great service. Fast shipping. Great prices. Perfect item desciption. Will recommend. 10 out of 10!!!! I bought the fenders for a custom application and they fit perfect. Will try to find an excuse to buy more stuff. I know i need something..... Until i figure it out, THANKS. 4973
by: Steve05/09/2017
I was very disappointed because I was having my white trailer painted black and needed one fender replaced. I ordered what I perceived to be an aluminum fender which is what my trailer has. I was shipped and the body shop installed it. Shorty thereafter it rusted. Turned out they sent a steel fender. 378162
by: LarryD01/17/2014
Yes your package arrived in a brief time slot better than any other purchase I made in the past. I will not be able to install the fender until I get all the cars out of the garage which will take a few weeks. I will need a few more items I sure will be necessary when I get to work on the trailer. 114026
by: Rod H08/10/2013
Fender was as represented on line, it was received in good condition without any damage from shipping, it fit the trailer similar to the original fender, overall I was very happy with my purchase. The only improvement would be for it to be available in a heavier gauge metal to better resist damage. 94343
by: Bonehead02/24/2012
Excellent product, better than I expected. Best price I could find by a long shot. I really shop around before making purchases and etrailer is by far the best value out there. I was also very supprised to receive my order the day after I placed it. I will be a repeat customer for sure. 32473
by: agustin03/18/2016
great fenders, on time delivery, service was just as good. would deal with them again 240982
by: Greg M.09/12/2012
etrailer is amazing! Great products at great prices with fast, secure delivery. These fenders are perfect for rehabbing my boat trailer. They arrived in excellent condition and are exactly as pictures on their web site. I will post pictures when I'm done. I will return. Thanks!!! 54470
by: Doug E.02/21/2012
Just what I needed. Nice product, good price, fast delivery. Thanks! 32051
by: Fred F.08/22/2013
Order arrived very quickly, and fenders are exactly as advertised, can't wait to paint and put on my trailer, well put first coat of primer last nite. They are my go to from now on for my trailer needs and other products. Very satisfied customer from Michigan :) 96343
by: Ray Low03/13/2017
Great stuff to work with. Pallet racks and etrailer parts 355693
by: Don T. from MN.04/06/2011
I just received a set of fenders and was very happy with the quality of them, they are made very well with heavy gauge steel. Im useing them on a custom Harley Davidson trike and the preformed shape makes them real easy to install . Thanks e trailor. 11183
by: Jake T10/22/2015
Product arrived quickly and packaging was excellent. No damage to the product and looks like quality craftsmanship. I'm not using this trailer fender for its intended purpose (tubbing out my front inner fenders instead) but it is top notch material. 230538
by: Bfuno1306/16/2014
Fenders arrived on time and packaged nicely. I was pleasantly surprised on how sturdy they were. They were rigid enough to make me feel secure, yet flexible enough to "make" them fit. Overall, an excellent product. 135802
by: larry mckinney12/09/2016
The fenders look great i am going to weld tabs to fenders and have powder coated color of my trailer or black.I needed new lights for fenders the ones i ggot will work great. I will tell my friends and neighbors. 323498
by: Dave S.06/28/2017
Good clean new fenders. Easily bolted in place and took paint very well. etrailer was great to work with. I wish I had bought galvanized, but these are holding up well with no appreciable rust or other issues. 399838
by: Shawn B10/21/2016
Fenders for my trailer were just as described, packaged with great care and shipped to me quickly. It was a pleasure to work with etrailer, both over the phone and online..Will do business with them again!! 309493
by: john d.02/06/2012
great quality and extremely rapid shipping. great package. using the fenders in custom building a street rod from a 1929 ford model a. They will work just fine with minor modification. Thanks so much. 31173
by: Jack L08/24/2016
On time delivery , fair price , just as ordered ,Very pleased with purchase Ordered from E trailer before always had excellent products , on time delivery . Excellent online Experience. 287274
by: Michael Storey08/08/2013
Item came earlier than exspected, fit perfect, Great Company and People to deal with. Next time blown tire takes fender off I know where to get another one and Quick too. LOL M.Storey 93879
by: William Dixon02/27/2012
They fenders I ordered are great. And the delivery time was above reproach. Will recomment your business to all my friends. The fenders really look good on the VW trike I am building. 32684
by: Debra03/10/2012
I bought these to use on my trike I'm just now getting to the body and wheels and tire phase it was a ground up resto but she will be slick when I'm done thank these will be perfect 33516
by: Brad Stillions07/23/2011
Wow very fast shipping and exactly what i was lookig for and a great price, Thank you very much and if i should need any other parts i will definately use etrailer Thanks again Brad 20020
by: Joe L.01/20/2015
I purchased these fenders for use in fabricating a step side bed for a 2002 S10 pickup. Quality of these units is awesome. hope to have a few photos in the next couple weeks. 170583
by: Paul02/28/2017
thanks for the qwick shipping. fender is exactle what i needed to replace rusted thrugh old fender on my traler. would have been beter if finder wqs primed, but no problem. 346764
by: ABS inc.03/24/2015
fenders were great and was delivered very fast as an ironworker i was impressed with your product and delivery time. i will do more business with your company in the future 180649
Ask the Experts about this Redline Trailer Fenders
At etrailer.com we guarantee:
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
