Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 230-lb Capacity
(20 reviews)
Price: $463.43
In Stock
Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 230-lb Capacity
Item # 362SA8HD
Our Price: $463.43
This item qualifies for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (20)
- Q & A (0)
- Photos
- Why etrailer?
TRC Trailer Ramp Springs - 362SA8HD
- Dual Ramp Spring
- 96 Inch Wide Doors
- Conventional
- 94 Inch WIde Spring
- 230 lb Capacity
- TRC
- Steel
- 4-7/8 Inch Tall Spring
Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This dual-spring setup lets you easily open and close the ramp door on your enclosed trailer and eliminates the risk of your ramp door freefalling.
Features:
- Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury
- Helps take on the weight of your trailer door so you don't have to
- Dual springs eliminate the risk of the ramp door collapsing and causing damage or injury
- If one cable falters, the other spring will prevent the trailer door from freefalling
- Spring reduces wear and helps prevent damage to door hinges
- System can be modified to fit your specific application
- Slide the bracket and cable drum down and cut the shaft to a shorter length
- Sturdy steel construction
- Made in the USA
Specs:
- Application: 94-3/8" to 95-3/8" wide trailer door
- Dimensions: 96" wide x 4-7/8" tall x 5-3/4" deep
- Spring capacity: 230 lbs
- Cable length: 150"
Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.
TRCSA8HD TRC Enclosed Trailer Ramp Conventional Springs - Dual 250 - 94" Wide - Qty 1
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 230-lb Capacity - 362SA8HD
Average Customer Rating: 4.6 out of 5 stars (20 Customer Reviews)
Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This dual-spring setup lets you easily open and close the ramp door on your enclosed trailer and eliminates the risk of your ramp door freefalling.by: Mike07/21/2022
Box was damaged in shipping. Drum was off and heavy gouging on the ID of drum and on shaft. Holes in hardware bag and holes in the box. I don’t know if hardware is missing. There is not parts list or installation instructions. There was no foam or bubble wrap protector in the box
Comments
I see you are attempting to install this on an enclosed trailer ramp door. Unfortunately we do not have instructions on this but I will continue to look for instructions if this link does not help. There should be a single spring and dual spring install guide. I have a link below for your reference.
-- 
Katrina B - 08/04/2022
Helpful Linkby: Backwoods Racing08/23/2022
The ramp door spring has worked great. The door opens and closes with ease.
by: Paul07/25/2021
Great value was everything it said it was , easy to mount and adjust. It replaced the current assembly on a 1916 era house garage door
by: Fidel11/14/2022
Everything delivered perfectly fine.
by: Alton 03/29/2020
Good quality products with this company. Ordered 3/22/2020 and received 3/26/2020. Just what we ordered and works great. Would highly recommend this company to anyone. Thank you so much for your quick delivery.
Comments
Works great, thank you
Alton - 03/30/2021by: Jerry 07/27/2021
Little more work then I thought it would be but when completed it worked excellent.
by: James 08/28/2021
Great product! Super fast delivery
by: Pat 02/26/2021
Received the product on time very good quality very knowledgeable staff
by: Gustave02/24/2021
worked great
by: Ed12/22/2022
by: Ernest 09/15/2022
by: Ted07/07/2022
by: Billy 08/04/2022
by: Mike 12/08/2022
by: Darrell12/07/2022
by: Van 09/30/2022
by: David 12/09/2020
Fast shipping
by: Tim 09/02/2020
by: Dan 08/31/2021
by: Michael 08/04/2021
20
20
See what our Experts say about this TRC Trailer Ramp Springs
- What Are the Dimensions of the Conventional Ramp Door Spring for 8 Foot Wide Enclosed TrailerThe Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 230-lb Capacity # 362SA8HD measures 96" wide x 4-7/8" tall x 5-3/4" deep. This spring is designed for doors that are 94-3/8" to 95-3/8" wide. If you can let me know what the width of your door is I might be able to locate something else that will work if that won't.
view full answer... - What Is the Warranty of the Conventional Ramp Door SpringsThe Conventional Ramp Door Springs like part # 362SA8HD are covered under a one year warranty which covers you from any manufactures defects. It would be hard to estimate lifespan as use, maintenance, and installation will all play a role.
view full answer... - Trailer Ramp Spring Ramp Door Weight CapacityThe Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 230-lb Capacity # 362SA8HD has the capacity to lift up to a 230 lb ramp door. It has nothing to do with the snowmobile weight on the ramp it just has to do with the strength of the spring and cables to lift the ramp door.
view full answer... - How to Calculate the Weight of the Ramp to Make Sure Door Spring is CorrectTo test the weight of your ramp door, you will want to get the door all the way down to the ground and then on a scale of some kind (a bathroom scale can be used for this if it's the only thing available). This will be when the door is at its heaviest point. As long as this weight is 230 pounds or less, the TRC Conventional Ramp Door Spring for 8' Wide Enclosed Trailer # 362SA8HD will be a great option and will definitely make lifting the ramp significantly easier. With that being said,...
view full answer... - How Long to Install the Conventional Ramp Door Spring for 8 Foot Wide Enclosed TrailersThere isn't a specific time given to expect since it depends on a variety of factors, but with a few helping hands and experience in doing this type of project, the installation of the Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 230-lb Capacity # 362SA8HD should take 1-2 hours. With that said, it is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before,...
view full answer... - What is the Length of Conventional Ramp Door Spring for 8' Wide Enclosed Trailer CablesThe Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 230-lb Capacity # 362SA8HD cables have a length of 150".
view full answer... - Torsion Spring for Trailer Ramp Door that Weighs 200 lbFor a 200 lb trailer ramp door we have the Conventional Ramp Door Spring part # 362SA8HD which would work great as it has a 230 lb capacity. You'd need to have a professional wind it for you but it would easily work great for a 200 lb trailer ramp door.
view full answer...
- Can Trailer Ramp Spring 362SA8HD Help Lift Rear Door with Patio Rail of Toy HaulerYes, the Conventional Ramp Door Spring part # 362SA8HD that you referenced will help make the ramp door feel a lot lighter than it currently is. When wound properly it could lift up to 230 lbs. The install of this can be somewhat dangerous since it's a torsion spring setup that requires quite a bit of torque which is why we don't include instructions and have to recommend that you find a garage door installer with experience winding these types of springs to install it.
view full answer... - Recommended Trailer Ramp Door Spring for 195 Lb DoorThe spring capacity for the ramp door spring will need to meet or exceed the weight of the door. If you have a 195 lb door then the closest option we have that will be able to lift this is the Conventional Ramp Door Spring for 8' Wide Enclosed Trailer part # 362SA8HD which has a 230 lb weight capacity. It fits doors between 94-3/8" to 95-3/8" wide.
view full answer... - Recommended Ramp Door Spring For 8 Wide Race Trailer With 200lb DoorI would be happy to help! Since the ramp door on your 8' wide race trailer weighs in roughly 200lbs I recommend the # 362SA8HD which works with ramp doors up to 230lbs so it will offer plenty of assistance to raise your door. Lastly we strongly recommend having the spring installed by a qualified professional as these springs are under a lot of tension and can be very dangerous to those not familiar to how they get installed. I included a video of the # 362SA8HD for you to take a look at.
view full answer... - Recommended Ramp Door Spring for a Spring with 82.5" Mounting Brackets and 89.75" Wheel WidthWe have a good solution but the Conventional Ramp Door Spring for 8' Wide Enclosed Trailer part # 362SA8HD does not have quite enough adjustment for you to be bale to make it work. It will only get down to 94-3/8". Instead the Conventional Ramp Door Spring for 8' Wide Enclosed Trailer part # CB250D96SHD is the way to go. This model can be adjusted all the way down to 80" which will work out really well with your setup.
view full answer... - Ramp Spring For Rear Door of 2015 Forest River Vengeance 5th Wheel Toy HaulerWe do offer a ramp spring that would work for you. According to my research, your Forest River Vengeance Toy hauler is about 8-1/2 feet wide, which means that you'd need an 8 foot spring. The exact spring needed would depend on exactly how heavy the door is. We offer a 250 lb spring as part # CB250D96SHD, a 230 lb spring as part #362SA8HD, a 150 lb spring as part # 362SW81 or a 120 lb spring as part # M354FR. Ideally, you'd want to choose a spring with a capacity a bit less than the actual...
view full answer...
Do you have a question about this Trailer Ramp Spring?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer ramp spring information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Wilson B
Written by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.