Replace your old snowmobile trailer door spring with this heavy-duty conventional ramp door spring. This single-drum setup reduces the chances of getting your snowmobile's ski caught in the cable. Fits 34-3/4" to 66" wide trailer doors.
Features:
Specs:
Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this conventional single spring, single drum ramp door spring for up to a six foot wide, enclosed trailer, has an 80 pound spring capacity. Now this part will replace your old trailer door spring with this nice heavy duty conventional ramp door spring. This ramp door spring will let you easily lift and lower the door on your enclosed trailer without risk of injury. It is designed to help take on the weight of the trailer door so that you don't have to.
This one here happens to be a single spring and a single drum system. A single spring is on the torsion rod has this cable drum here with the lift cable at the one end to lift the door. It only uses one cable to lift the door in this application. And this system is normally used in snowmobile trailers to help reduce the potential for catching a ski in the cable.This spring does reduce the wear helps prevent damage to the door hinges. Now, when you do install this, the spring is designed to be mounted one way for proper operation.
And the way you can tell that is if you look at the cable drum, it'll be stamped with an R, which means for the right side. And they do also spray painted black here for visual indication of knowing that that's for the right side. The right side is designed to mount on the curb side of the trailer.Now this part will include everything laid out here on the table. The spring itself, the mounting brackets, the hardware for the mounting brackets, the bearing, gives you 150 inches of one eighth inch diameter cable and hardware to install that. And then the set screw cover.
Now this spring system can be modified to fit your specific application.You can slide the bearing and the mounting bracket where needed, and then just cut the shaft to a shorter length. So if we put the bearing on, let's say, you're going to go all the way, to narrow as possible. And if you put the mounting bracket on. So you can see what that all installed, it will fit any words from if we measure this portion 34 and three quarter inch wide trailer door, all the way up to the widest, which would be sixty six and seven eighths inches wide. Now this is a nice sturdy steel construction.
It is made in the USA. Few specs, again. The overall length from this end, all the way to this end is going to be right at sixty six and seven-eighths inches long. The drum diameter, which is the widest diameter on this is about four and three quarter inches diameter. And the spring capacity, as we mentioned, is 80 pounds.But that should do it for the review on this conventional single spring, single drum ramp door spring for up to a six foot wide enclosed trailer, has an 80 pound spring capacity.
Average Customer Rating: 4.7 out of 5 stars (267 Customer Reviews)
Replace your old snowmobile trailer door spring with this heavy-duty conventional ramp door spring. This single-drum setup reduces the chances of getting your snowmobile's ski caught in the cable. Fits 34-3/4" to 66" wide trailer doors.I think you sent me wrong side said curb side I am using it in front of trailer seems to be back word but with some fabricating maybe I can make it work
Jenny N - 02/19/2022I really appreciate your attention and courtesy.
Very professional.
I really recommend this company 100%
Great product with great price!! My back is very appreciative!
Review from a similar M3 Ramp Springs in Trailer Ramp Springs
Trailer door extra welded extra heavy. This spring has worked great for a year so far, never pushed its limits but never didn’t trust it.
Review from a similar M3 Ramp Springs in Trailer Ramp Springs
Installed on our 2015 cargo trailer to replace broken unit. Works flawlessly and would order from etrailer again if we need parts.
Review from a similar M3 Ramp Springs in Trailer Ramp Springs
The M394FR ramp spring I purchased a year ago has been working great. It was easy to install and out performs the original spring on my 24’ car hauler trailer.
Review from a similar M3 Ramp Springs in Trailer Ramp Springs
Complete kit, no alterations or additional parts needed. Totally bolted into existing structure. Will use e-trailer again in the future.
Review from a similar M3 Ramp Springs in Trailer Ramp Springs
use it on my daily use trailer and everything is working great a year later , thank you.
Review from a similar M3 Ramp Springs in Trailer Ramp Springs
Easy to follow instructions. Works grea t.
Mark - 12/31/2022Review from a similar M3 Ramp Springs in Trailer Ramp Springs
I added this to the front trailer door which never had a spring assist. It installed easy and works great on the 60" wide ramp door.
Review from a similar M3 Ramp Springs in Trailer Ramp Springs
Product is good and quality was as expected. Instructions were decent. Packaging was very poor. Product was dropped into oversized box with no packaging materials. Arrived with rod sticking out of the end of the box and a crack in the cable wheel. Wasn't worth the effort to return, so I used as-is.
Review from a similar M3 Ramp Springs in Trailer Ramp Springs
Easy to install, makes opening and closing the ramp door a breeze.
Tim - 10/05/2022Review from a similar M3 Ramp Springs in Trailer Ramp Springs
We received our door spring and the drums were damaged. I called etrailer and they sent new ones out quickly so we could get our trailer door fixed right away. They were most excellent in customer service :)
Review from a similar M3 Ramp Springs in Trailer Ramp Springs
Customer service was great! Some parts were lost in shipping and everything is good now.
Review from a similar M3 Ramp Springs in Trailer Ramp Springs
Worked well, cut down the bar to fit our trailer needs and bolted right up. Right side pulley was bent, (Probably from Shipping). Working with them for a replacement. Just took the pulley off the old to get the trailer back on the road. Installed quickly with 2 guys and everything was as described when purchased.
Review from a similar M3 Ramp Springs in Trailer Ramp Springs
I have a home repair buisness and repair and install garage doors so it was a great benifit in intalling this ramp door spring. The quality of these are right up there with whats on your garage door just lighter duty springs. Be sure to weigh your door to get the correct springs. Customer service was beyond great, thank you to all reps.
Review from a similar M3 Ramp Springs in Trailer Ramp Springs
I ordered it and it was here in 3 days! Good quality, Nice price & Fast shipping! Nobody local would sell us one because we weren't using it for a ramp door! We used it to assist in lifting the 80lb. stairs on a truck. Works great, There won't be any back injuries now.
Review from a similar M3 Ramp Springs in Trailer Ramp Springs
First, shipping was really fast. After I ordered I received a email saying my order had already shipped. I ordered on a Tuesday and was able to install my equipment during the weekend. I have a smaller 6 x 10 trailer and I only utilized 1 torsion spring which gave me a back up spring for reserve. After installing the unit with new tension cables my ramp door works smooth and I’m really happy to have my trailer back in service again. etrailer understands the importance of getting customers product out as soon as possible. I thank you for your professionalism and will recommend your company in the future.
Review from a similar M3 Ramp Springs in Trailer Ramp Springs
when installed it should be an excellent addition to trailer.
Review from a similar M3 Ramp Springs in Trailer Ramp Springs
Got package which was opened ,,, Missing the main brackets and need 8 ft assist ramp helper
Jenny N - 07/27/2022Review from a similar M3 Ramp Springs in Trailer Ramp Springs
Everything worked out great. Installed on a snowmobile trailer. The door originally only had a spring system on the bottom of the door. It took 2 people to close. After installing the M394FR it is a 1 arm operation. Highly recommend this product
Review from a similar M3 Ramp Springs in Trailer Ramp Springs
Great price and fast shipping. Packaged well and has everything you need besides the wrenches rods to wind spring. Very easy to install. Since I had been brackets already it took me about 45 minutes including taking the old one off. And I already had the rods to wind spring up which is a must. Thanks.
Review from a similar M3 Ramp Springs in Trailer Ramp Springs
So ordered this assembly , fast , friendly ( Kyle D ) assisted and was able to answer all questions about this product and the result was quality new door spring and assembly for my cargo trailer. Easy to follow step by step instructions. Would definitely recommend this upgrade.....
Do you have a question about this Trailer Ramp Spring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.