Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replacement hasp fits Polar Hardware cam-action lockable door latch kit (PLR158-SS) for small enclosed trailers. Stainless steel construction provides durability and superior corrosion resistance.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jake: Hey guys, Jake here at Etrailer. Today I'm going to show you how to replace your hasp on your enclosed trailer. This hasp is going to come in three different varieties. It's going to come in a zinc-plated steel, like we have here, aluminum and stainless steel. This is one part on your trailer that's often forgotten about for example this is the hasp that we replaced as you can see it's a little rusty, it doesn't work as smoothly, at times it'll squeak which is annoying. The new hasp is going to work very smoothly compared to our old one, obviously you can see it's got quite a bit of rust on it, that's where the zinc-plated finish, the aluminum and the stainless steel are all going to help to combat so that your new one isn't going to face the elements like her old one did.Now the operation is going to be the same as any hasp that you are familiar with.
It will have this little tab to hold it open which is a nice feature because I have used hasps in the past that do not have this little tab and it's a two-handed job, you have to hold it up to latch it in place. It is going to have a hole in both of the brackets to be able to put a padlock in. A quick note, the measurements between the holes are going to be four inches center on center, just so you know, so that you can match it up to your old existing holes. Now something to keep in mind, this kit is not going to come with new hardware so you're either going to have to pick up new hardware or you're going to have to use your old hardware that you took out of your old hasp. With that being said, it's a fairly simple installation so we'll go ahead and show you how to do that now.We lined it up with our old pre-existing holes and the holes are not going to line up so we're going to have to drill another hole and we will be able to reuse our old hardware, but we're going to go ahead and drill out that hole.Then we're going to be reinserting the hardware that came out of these holes on our old latch because I like how they have a flush mount design on the inside.
If you need to pick up new hardware, go ahead and just pick up the same bolts, they are going to have the same size square as the latch does. Then we can go ahead and test fit it after we got everything safely secured. Now we can take some gasket sealer or some caulk and fill in any holes that might be still present. Here we're just using some white caulk to patch up that hole.Once you're finished with the installation, you're ready to lock up your trailer and hit the road. Well guys, that's going to do it for our look at and installation of the replacement hasp on our enclosed trailer..
Average Customer Rating: 4.7 out of 5 stars (59 Customer Reviews)
Replacement hasp fits Polar Hardware cam-action lockable door latch kit (PLR158-SS) for small enclosed trailers. Stainless steel construction provides durability and superior corrosion resistance.I ordered this product because my trailer was broken into and it was an exact match. The install took about 5 minutes and all was well.i was able to do it at night with very little light.
Someone decided to enter my trailer for their own selfish reasons! Cut my locks and bent the aluminum hasps. I replaced them with these Stainless Steel ones. Fit the same holes. (measure to make sure yours will fit!)
I have been looking for this specific product, and should have checked here first. Exactly what I was looking for and easy and quick delivery, thank you!
This is a good hasp. I was impressed with the price and shipping was fast. It is stainless steel and I feel that it is more secure than the factory original that was cut when my trailer was broken into and one of my shotguns was stolen.
I do wish that your website would have suggested the mounting hardware that goes with this hasp. I was able to reuse the old hardware but it was bent from the break in and it was a little to long so a stack up of washers was required for a time until I found the correct hardware. The stainless metal is a little thinner than the original so the outer part of the hasp wouldn't rest against the tab that is designed to hold it out of the way. Again, I feel that this was a hardware issue. An option for a kit with matching stainless hardware would have been the best for me but I didn't have that option.
Overall a great product by itself.
Which there was a link to the install hardware no matter nice looking heavy duty product and will pickup mounting harware locally
The latch/locking parts for our work trailer were exact replacements for what we needed.
Shipping, packaging and your description/pictures
made our transaction a great one.
I like this door hasp. The hole pattern is different from the factory unit, but, in my case i was building a new door and that did not matter. There is no rust occurring after one year of being outside in the weather.
Jeffrey
6/3/2019
Working so well, it helped sell the trailer
Old galvanized hasp was beginning to rust and had to be replaced due to a break in. This replacement stainless steel hasp was only a couple of dollars more than the galvanized and am looking forward to see how its appearance holds up. Have bought previous items from etrailer as the prices are good and the shipping is fast and the charges reasonable. Beats running around town trying to find replacement parts.
Nice product. I ordered these to replace the stock latches on my cargo trailer. These latches work great with my enclosed padlocks.
I needed to replace one of my ramp door latches, so I decided to replace both so it would match. There are lots of them on the market, but I decided that I wanted to replace mine with the original stainless steel ones.
These were a perfect match and worked great, if you’re looking to match the original, I would recommend these.
Thank you,
Great fit, and I like the fact that it's stainless. I only wish it included mounting hardware. I could not find stainless mounting hardware to match the latch.
Advertised as stainless but it arrived as raw steel, very disappointed
Sierra K.
10/25/2021
Sounds like you may have received the wrong product. Customer Service will reach out to you.
The item arrived quickly and was a match for the one that was originally installed which made the new installation very easy.
This latch is 100% better than the one that came on the trailer. Great quality
Works fine and still looks new
So far so good. Bought stainless steel thinking it would be harder to cut with bolt cutters[what happened last time, didn't cut the lock cut the hasp] No attempts to break in so far. ajland
Replacement, actually better than the original. Hasp looks and feels much more sturdy.
Very helpful and courteous. Ordered Saturday morning and had order Tuesday. Everything looked great. Will use etrailer for all my trailer needs. :)
Best customer service and great parts and prices thank you
Nice replacement for the original ones that were cut with bolt cutters. A special thanks for the thieves who made this purchase possible.
Great products and fast service I would recommend them for all your trailer needs!
Service was great
Perfect, the shipping bag came in tore on one side, but other than that no damage to product and got here fast. Thank you
Perfect! For my trailer.
Do you have a question about this Trailer Door Latch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ed
8/12/2019
all in good shape the SS hasps are ruggged and the security ticket for my locks