Replace a broken or damaged interior handle on your truck cap or camper shell with this L-shaped handle. Replacement handle pairs with locking T- or L-handles and fits most square-shaft operating handles with a 5/16" shaft.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellena: Hey everyone. I'm Ellena here at etrailer.com. Today we're taking a look at the JR products interior L-handle. This is going to be a replacement for a little L-handle that maybe got broken somewhere along the line, damaged or maybe just worn out and needs a new upgrade. So, this is going to fit any kind of square peg that has a 5/16 inch distance. As you can see there's a little eight pointed star in there, so you can have it in a couple different angles to make sure that you get it lined up properly.But the distance between those side to side for an actual square to fit in there is 5/16 of an inch.
It also has a set screw on the sides, so you can make sure that that's tightened down and secure. The opening for that, or the hex key that will fit in there is going to be a 5.30 inaudible 00:00:53 or a four millimeter hex key or Allen wrench. Excuse me. As far as the overall length of our handle, it's about three and a half inches long from that curved edge to the front here. The widest point, it's about an inch wide.
The top there, the very bottom, it's about 3/8 of an inch.The cylinder here is about 5/8 for that outer portion. The length coming off of our handle is about one and 1/8. The distance between the center of our set screw to the end is about 3/8 of an inch. Overall, length that's going to stick out, or depth that's going to stick out is about one and .. Excuse me.
One and 3/8 of an inch. So, should get you out and rolling, enjoying your RV again without thwarting door handle.It is covered by JR product's lifetime warranty, and that's pretty much going to do it for our look at the JR products interior L-handle. If you need any other replacement or accessory parts for your RV, you can always turn to us here at etrailer.com. Happy to provide the information you need to make your purchasing process a little bit easier, and get you back out in enjoying your adventure. Thanks for watching..
Average Customer Rating: 4.7 out of 5 stars (25 Customer Reviews)
Replace a broken or damaged interior handle on your truck cap or camper shell with this L-shaped handle. Replacement handle pairs with locking T- or L-handles and fits most square-shaft operating handles with a 5/16" shaft.Nice solid product... much more substantial than the Perko handles on marine 5/16th shafts.
Talk about prompt, accurate products with GREAT customer service - I had it all from etrailer- thank you
Customer service is great. I was sent the wrong part for one of the items in my order,
and e-trailer's communication was superb. They emailed a pre paid label and are sending me the correct item. I definitely recommend buying from etrailer
Ordering and receiving parts was quick and easy.
Exactly what was needed.
Great quality, looks good, ergonomic and easy to use. Thank you e-trailer.
Product went right on, no issues. Fits perfectly. Added blue locktite to the set screw and all is good.
I bought this because my truck canopy has sagged with age, and the traditional L-handles are a touch too small to actually lock the canopy. Also, traditional handles only mount on a 90 degree angle and I could see if I could mount mine 15 degrees counter clockwise, that it would lock more securely.
The issues with this piece: You don't have as much adjustability in mounting angle as I would like. Basically, the star allows you to mount it ONE extra position in between the usual 90 and 180. There would need to be more star points for this to actually be functional for me. That is: the star pattern is two boxes overlaid onto each other, 3 boxes would have given me the ability to really adjust the angle of mounting.
The main issue, however, is the locking mechanism. This piece uses an allen wrench screw to lock onto the main shaft and only has at max 3 threads inside the L handle. And when you mount it on an angle, as I was trying to do, it has only 1 thread inside the L handle. Predictably: the inner threads sheared off the first time I tried tightening it.
I'm returning it because it is completely unusable.
We are converting a 2002 shuttle bus into an RV. We needed interior door handles for the back and side doors. Emailer had what we needed at a reasonable price, and they work perfectly.
It fit perfect and working good I am very happy I found this handle Communication was great and shipping was very fast
Thank you very much
A perfect replacement for a damaged par t!
The set-screw stripped out on installat ion.
Works perfect.
Product is as described and it arrived timely. It will resolve issues that warranted its first time purchase from this company.
worked good
Worked like it was supposed to!
Handle fit perfect.
Do you have a question about this Trailer Door Latch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.