Can be keyed alike with other Blaylock push-button locks. Sturdy, rustproof lock discourages towaway trailer theft by covering your coupler's ball opening and fully surrounding the lip. Fits 2" medium-duty and heavy-duty 8K couplers.
Features:
Specs:
After it has been secured in place, this Blaylock EZ Lock renders your trailer's coupler inoperable, giving you peace of mind. Simply slide the lock around the lip of your coupler, push the 5/8" diameter pin into the coupler's hitch ball recess, and push in the lock mechanism. The unit fully surrounds your coupler to prevent access to the hitch ball recess. The sturdy steel pin extends to the top of the recess, and the pin cannot be accessed while the unit is locked.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, on our trailer, we'll take a look at the Blaylock EZ Trailer Coupler Lock for 2 inch Lipped Couplers, Part Number BLTL-36. The Blaylock lock can be key to like with other Blaylock push button locks. You'll notice the build up inside the lip. It doesn't allow for full, rolled lipped couplers, only the flat lipped couplers that it can slide over. The main body of our housing is an aircraft grade, light weight aluminum construction, which is extremely strong and will resist the wear, tear and corrosion. Going up through the center of our housing is our steel pin that will slide into the hitch ball opening to prevent removal of our lock. Here on the front, is the push button lock that secures to the trailer coupler and being on the front it's easy to access and the tumbler, being recessed, adds additional security.
That will complete it for the install, operation and review of the Blaylock EZ Trailer Coupler Lock for 2 inch Lipped Couplers, Part Number BLTL-36 on our trailer. .
Average Customer Rating: 4.8 out of 5 stars (762 Customer Reviews)
Can be keyed alike with other Blaylock push-button locks. Sturdy, rustproof lock discourages towaway trailer theft by covering your coupler's ball opening and fully surrounding the lip. Fits 2" medium-duty and heavy-duty 8K couplers.We earlier purchased the BLTL-38 and found that it was about 1/8" too narrow to fit on our Atwood hitch on our Aliner trailer. The -36 looked like the next size up for our 2" ball hitch. The -36 is a bit too far in the other direction, slopping about excessively. I stuffed a cheap socket wrench socket over the locking pin to take up some of the slop, which seems to help. It seems like a very well made and elegant product that will stop the casual trailer thief. Someone with a torch or Sawzall should be able make short work of the lock, but hopefully there isn't a ring of trailer thieves out there. :-) Finding the hitch lock that will fit your trailer like a glove will require a careful dimensional index of trailer hitch types and sizes, or a shop that has everything and will let you try them on for size.
My trailer has not been stolen since using these tongue locks....
the lock works grate easy to put on had a 16 ft trailer stole from me its no fun dont think they can get this off without the key cost me 3000 for the new one its 18 ft long dont want to loose it the police department cant do anything we pay them well for nothing but writing us tickets so I suggest you spend a few bucks for insusance because if your like me you deductable is around 2500 so what good does it do you for 40 bucks you can hold off a no good theif and save your self the problem of lossing something you paid dearly for
I ordered the wrong size coupler lock and etrailer immediately sent a return shipping label by e-mail and sent the correct size immediately. They credited my account, less the return shipping. No hassle at all. The lock works as described. Great service by etrailer as usual and quality products. This is my sixth purchase of an etrailer item over a four year period. Highly recommended.
I am very pleased with the quality and ease of use. Well thought out of good engineering. My previous lock was not user-friendly but this lock solved that problem.
Good service, came quickly!
I ordered an item and found out it was out of stock. The folks @ etrailer kept me informed on the status and sent it out as soon as it came. Great job
Very nice and solid lock. I have 4 of them and if I got another trailer I would add a 5th.
I have not used the lock yet but I am impressed with the quality so far. shipping was fast and ordering was very easy. Thank you eTrailer!
Fast shipping and will give me peace of mind when parking my trailer.
Review from a similar EZ Lock in Trailer Coupler Locks
Works great! I did need to file the inside just a tiny bit at the top to get it to slide on enough but not a big deal. Very happy! The lip on the tongue flared out just a little as it went back toward the camper.
Review from a similar EZ Lock in Trailer Coupler Locks
Good product. Works as expected but for one thing. With my truck and 5th wheel setup, I cannot get the trailer level, even when loaded. Not enough height adjustment. Makes hooking and unhooking much easier. Attached the picture to show my problem, even though the adapter is not visible.
Review from a similar EZ Lock in Trailer Coupler Locks
It is a well thought out product. The lock device for the King Post height adjustment cap screws fits nice. However, the main locking slug for the ball hitch doesn't fit my trailer like it is supposed to. I have a Kaufman trailer and I'm not sure what brand of post they use. The guide tab for the ball lock D-ring is in the way of the Blaylock pin. I am able to rotate the locking device 180 degrees and install it that way. It's a bit sloppy but it will impede a potential theft. I also fear the longevity of the padlocks. I can see them rusting if left out in the weather for too long. I keep my trailer tarp on when not in use and also flood the padlocks with WD40 I know it is impossible for a "fits everything" product. I think Blaylock would serve themself well if they did research and list all trailer brands that will fit or not fit their product and perhaps, have an alternate choice. I do recommend looking into this product if anyone is thinking about securing their trailer.
Review from a similar EZ Lock in Trailer Coupler Locks
Something I should have purchased years ago. Fitment was easy. I had to get a bigger washer for the top lock, as my bolt was larger than the washer provide, but no big deal.
Review from a similar EZ Lock in Trailer Coupler Locks
I ordered 4 of these keyed alike. I live on a small peninsula surrounded by saltwater, my old locks rusted up and became useless. This lock setup is beefy and shouldn’t rust i I p on me. The shipping was fast and keyed alike option is great.
Review from a similar EZ Lock in Trailer Coupler Locks
Great product! Fits my trailer perfectly! I bought this item because I have my own lock to use. Would definitely recommend!
Review from a similar EZ Lock in Trailer Coupler Locks
This lock system is simple and weather exposure should not be a hindrance for removal when needed. I would like to see the pin made of hardened steel. May get a machinist to fab one up out of a harder Rockwell rating. Painted it Orange and it contrasts very well to the black trailer frame. This is a visual que for those passing by the county road, that the coupling has 'something' on it. The Master lock appears to be of a higher quality the the same design but sold for storage unit use. It may be made by Master but have no way of knowing. The lock operates very smoothly and the stainless body is perfect for outdoor application. A shout out to Jennifer who has been providing excellent customer service from day one. This means I will use etrailer for future trailer needs, thanks to her. Hope this helps others.
Review from a similar EZ Lock in Trailer Coupler Locks
Used on my Wells Cargo 16' enclosed trailer. I touched mine up slightly with a grinder because it was a tight fit and it's on perfectly now without being too tight. Good solid construction.
Review from a similar EZ Lock in Trailer Coupler Locks
Nice design and EZ to install. Seems to be very secure. Luckily have not had to have it tested, but I'm sure it significantly deter a thief.
Review from a similar EZ Lock in Trailer Coupler Locks
I am quite satisfied with the Blaylock coupler lock. It is well made (I appreciate it having been made in the USA). I have both lipped and flat flange couplers on two different trailers, and I only need to lock one at any given time, so I got the one that fits lipped couplers and it will work on either one; if I wanted to be elegant, I would make a shim for use with the flat-lipped hitch just to take some vertical clearance out of it, but that would be merely putting booties on the cat -- it achieves its purpose as it is, and gives me versatility. I like the axial tolerance built into the locking pin because I'm confident it will not hang up, rust, or stick with age and dirt accumulation.
Review from a similar EZ Lock in Trailer Coupler Locks
I like the design of using the flange to secure the lock to my TT. I store my AIRSTREAM at a storage facility near my house and the gates aren't always working (usually open). The ball lock I was using was less than Ideal. Love the ease of use, close fit on the flange, security and over all piece of mind this lock gives me.
Review from a similar EZ Lock in Trailer Coupler Locks
This fits my travel trailer hitch and I can use the padlock of my choice, which is the Bolt padlock.
Review from a similar EZ Lock in Trailer Coupler Locks
This tongue lock will work good but is rather loose at best when installed. I’ve seen better tongue locks but I wanted one that would accept my keyed alike disc padlocks. So this will work.
Review from a similar EZ Lock in Trailer Coupler Locks
Does not fit Bulldog BX1 coupler, otherwise looks nice. etrailer did a great job helping me troubleshoot.
Review from a similar EZ Lock in Trailer Coupler Locks
As always etrailer provided excellent service with arrival on the date promised. I needed the EZ lock as a gift for my buddy's camper as he uses a gooseneck hitch. Easy to apply and appears well made and sturdy. Could likely be gotten off yet it would take some work and likely wake up anyone in the area.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.