CargoSmart Folding Shelf Brackets for E-Track or X-Track Systems - 12" Deep - Qty 2

Video Transcript for CargoSmart E-Track or X-Track System Shelf Track Brackets Review

Hi guys. It's Randy again from etrailer.com. Now, we have a lot of customer requests asking for solutions to get more storage in their enclosed trailer. I think is going to be more a display type situation what we've got here. These are shelf brackets, designed to work with E-track and X-track systems. They can be fixed or folding, just depending on the one you choose, and these are going to be a really good solution, whether you're doing a flea market, kind of a craft booth in your enclosed trailer.

If you want to get things out there and get them displayed.I also thinks these are going to work out really handy if you have the E or X-track installed in your garage. You can get your shelves exactly where you want them, and when you're ready to move them, they very easily unclip from our E-Track or X-track and we can move them just about anywhere that we want.As far as dimension on your bracket go, from your mounting surface to the very end we've got about nine inches. This is a nine and a half inch piece of board that we're using on top of it, but you can use boards up to 12 inches long to get really good depth.The hardware to attach your shelf to your brackets are included. We're going to have eight of these screws. You can just run them right up into your board, or if you're using thicker items, you want some more support, you can provide your own screws.If you're going to use the folding version, really quick easy and simple to get it to fold.

See, we've got this pin. It's got ball b tips on each side to hold it in place. We're simply going to pull that out, rotate out shelf into the stored position then we can reinsert our pins.In this position with it stored, it's going to be about six inches out from our mounting surface, and we're using a half inch board. Now while I don't think it's designed specifically for this application, you will notice there are a few cutouts here. I kind of like that.

It gives you an idea where under our shelf we won't be wasting any space. We can also have items hanging there.These bracket shelves are really nice and heavy duty, thick steel all the way around. I don't think we're going to have any issues with these deforming or bending down around the round. Then of course that yellow zinc finish is going to help keep corrosion to a minimum. We should have years of good service out of these.Whether you choose the folding or the fixed, in my opinion these are going to be a really good solution for you adding shelves into your enclosed trailer like this or at home in the garage..