Buyers Products Traffic Cone Holders - Vertical Mount - Black Powder Coat - Qty 1

Video Transcript for All You Need to Know About the Buyers Products Traffic Cone Holders

Jake: Hey guys, it's Jake here at eTrailer. Today we're going to be taking a look at and I'm going to show you how to get in place, the Buyers Products cone holder. This is going to hold your caution cones in an upside down fashion, so that you can store them on the front or rear of your trailer, or wherever you want to put it and you know your caution cones are going to be safe when you get to your destination.And then when you get to your destination, it makes it a lot easier to take them out one by one and set them in place. The cone holders going to be able to hold a caution cone up to about 28 inches, but as you can see here, we have a much smaller one than that, and it's doing just fine.It's going to have an 11 inch diameter in the ring, so you just want to make sure the diameter of your base is smaller than that when putting your cones in so that it fits nice down inside of it.The holder's going to have a black powder coat finish with a carbon steel construction, so it's going to be strong enough to be able to hold those caution cones when going down the highway.It's going to have two included holes where you can insert bolts and washers and bolt it to your trailer like we have here, or you can use a self tapping screw and screw it to your trailer, whichever suits your needs best.The measurement, center on center to the two holes you have provided, is about five inches and you will have to provide your own hardware.All in all this is going to take away the hassle of trying to find a place to put your caution cones, to be able to organize them and always know where they're at.Well, guys, with all that being said, that's going to do it for our look at the Buyers Products Cone Holder.