bing tracking image
  1. Trailer Brakes
  2. Dexter
  3. Disc Brakes
  4. 7000 lbs Axle
  5. Hub and Rotor
  6. 16 Inch Wheel
  7. 16-1/2 Inch Wheel
  8. 17 Inch Wheel
Dexter Disc Brake Kit - 12-1/4" Hub/Rotor - Grease - 8 on 6-1/2 - E-Coat - 7,000 lbs

Dexter Disc Brake Kit - 12-1/4" Hub/Rotor - Grease - 8 on 6-1/2 - E-Coat - 7,000 lbs

Item # K71-694-695-10
Our Price: $1,782.51
Trailer Brakes
This item qualifies for Free Shipping
Shipping Weight: 115 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Two brakes fit 7,000-lb axles with 16" to 17" wheels. E-coat finish on hubs, rotors, calipers, and mounting brackets resists corrosion. 1/2" Wheel studs, inner bearings (25580), outer bearings (14125A), races, seals, and caps included. Lowest Prices for the best trailer brakes from Dexter. Dexter Disc Brake Kit - 12-1/4" Hub/Rotor - Grease - 8 on 6-1/2 - E-Coat - 7,000 lbs part number K71-694-695-10 can be ordered online at etrailer.com or call 1-800-496-5010 for expert service.
  • All Info
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Dexter Trailer Brakes - K71-694-695-10

  • Disc Brakes
  • 7000 lbs Axle
  • Hub and Rotor
  • 16 Inch Wheel
  • 16-1/2 Inch Wheel
  • 17 Inch Wheel
  • Camper
  • Car Hauler
  • Utility Trailer
  • 8 on 6-1/2
  • Dexter
  • 1/2 Inch Studs

Two brakes fit 7,000-lb axles with 16" to 17" wheels. E-coat finish on hubs, rotors, calipers, and mounting brackets resists corrosion. 1/2" Wheel studs, inner bearings (25580), outer bearings (14125A), races, seals, and caps included.


Features:

  • Trailer brake assemblies make it easy to upgrade from drum brakes to disc brakes for better performance
    • More consistent stopping, even at highway speeds
    • Dramatically shorter stopping distance
    • Easier and less expensive to maintain
  • E-coat finish provides corrosion resistance for freshwater and limited saltwater use
  • Vented rotors help to regulate temperature to prevent overheating
  • Included hubs replace your existing hubs
  • Self-adjusting calipers ensure maximum surface contact for smooth, equal braking
  • Semi-metallic brake pads resist heat and provide excellent grip
  • Ductile iron mounting brackets provide strength and durability
    • Weld-on flanges sold separately
  • Kit includes 2 full brake assemblies for 1 axle
    • 2 E-coated hub-and-rotor assemblies
    • 2 E-coated ductile iron calipers
    • 4 Semi-metallic brake pads
    • 2 E-coated caliper mounting brackets with bolts and nuts
    • Bearings, races, grease seals, and grease caps
    • Thread sealant
  • Hydraulic brake actuator and lines (sold separately) are required for brakes to be activated
    • Requires psi rating of at least 1,600
  • Made in the USA


Specs:

  • Fits:
    • Axle capacity: 7,000 lbs
    • Wheel size: 16", 16-1/2", and 17"
  • Bolt pattern: 8 on 6-1/2"
  • Wheel bolt diameter: 1/2"
  • Rotor diameter: 12-1/4"
  • Brake flange configuration: 5 bolt
  • 5-Year limited warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: 25580 (1.75" inner diameter)
    • Outer bearing: 14125A (1.25" inner diameter)
  • Races (included)
    • Inner race: 25520
    • Outer race: 14276
  • Grease seal (included): GS-2250DL
    • Inner diameter: 2.25"
    • Outer diameter: 3.376"


K71-694-00 Dexter Axle Disc Brake Retrofit Kit - E-Coat - 7,000 lbs - Left Hand

K71-695-00 Dexter Axle Disc Brake Retrofit Kit - E-Coat - 7,000 lbs - Right Hand

008-416-90 Dexter Axle 12-1/4" Hub-and-Rotor Assembly - Grease - 8 on 6-1/2 - E-Coat - 1/2" Bolts - 7K





Video of Dexter Disc Brake Kit - 12-1/4" Hub/Rotor - Grease - 8 on 6-1/2 - E-Coat - 7,000 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Dexter Axle Trailer Brakes - Disc Brakes - K71-694-695-10 Review

Speaker 1: Today we're gonna take a look at the Dexter 12 1/4 inch E-coat hub and rotor disk brake kit with the eight on 6 1/2 inch bolt pattern for 7,000 pound axles. These trailer brake assemblies will make it very easy to upgrade from drum brakes to disk brakes for better performance. Disk brakes will give you more consistent stopping even at highway speeds and even dramatically shorter stopping distances, and they are easier and less expensive to maintain. This kit will include two full brake assemblies for one axle. It includes everything laid out here on the table. The two E-coated hub and rotor assemblies, the two E-coated ductile iron calipers, the four semi-metallic brake pads, the two E-coated caliper mounting brackets with all the bolts, nuts, and even a little tube of inaudible 00:00:44 sealant.

Also includes the bearings, the bearing races, which are pre-installed in the hubs, grease seals, grease caps, and the lug nuts.The E-coat finish on this will help provide corrosion resistance for freshwater and limited saltwater use. The rotors themselves, if I turn it here you can see on the side here they are vented rotors; this will help regulate temperature to prevent overheating. Now the included hubs will replace your existing hubs. The calipers themselves, they are self-adjusting calipers. They ensure maximum surface contact for nice, smooth, equal breaking.

The brake pads that are included are semi-metallic brake pads, help resist heat, provide excellent grip. The mounting brackets, these are a ductile iron mounting bracket, which will provide strength and durability.Now a hydraulic brake actuator and brake lines are required for these brakes to be activated. We do sell those separately on our website, and it will require a PSI rating of at least 1,600 PSI. These parts are made in the USA. Again, this fits axles with a capacity of 7,000 pounds.

The wheel size that'll fit on these is 16 inch, 16 1/2 inch, and 17 inch. Bolt pattern is the eight on 6 1/2 inch bolt pattern. Wheel bolt diameter is half inch. Total rotor diameter edge to edge is 12 1/4 inches, and this is a five-bolt brake flange configuration. You can see right here, and it includes the nuts to install it.

Now the bearings that are included, they do include the inner bearing, which is the larger. It's a 25580 number, 1.75 inch inner diameter. The outer bearing, the smaller, is part number 141258, has a 1.25 inch inner diameter. We mentioned the bearing races are pre-installed in the hubs. The seals, they use a double lip grease seal, part number GS-2250DL. These seals will have an inner diameter of 2.25 inches, outer diameter of 3.376 inches, and then they include the 16 half-inch by 20 size lug nuts, which are used to hold your wheel and tire assembly to these hubs.That should do it for the review on the Dexter 12 1/4 inch E-coat hub and rotor disk brake kit with the eight on 6 1/2 inch bolt pattern for 7,000 pound axles.

0
0

See what our Experts say about this Dexter Trailer Brakes

  • Replacement Calipers and Brake Pads for Dexter 7,000 Pound Disc Brake Kit
    We have both the brake pads and the calipers available as replacement parts for the Dexter Disc Brake Kit - 12-1/4" Hub/Rotor - Grease - 8 on 6-1/2 - E-Coat - 7,000 lbs # K71-694-695-10. For the brake pads and mounting hardware you need the Dexter Semi-Metallic Disc Brake Pads # K71-629. The correct calipers are the Replacement Caliper for Dexter Disc Brakes - Left Hand or Right Hand - E-Coat - 7,000 lbs # K71-693-00
    view full answer...
  • Electric over Hydraulic Disc Brake Conversion for 7,000 lb Nev-R-Lube Axles
    For your 2010 Jayco Designer with 7,000 lbs Nev-R-Lube axles we have several disc brake options that will fit. The weld on flange bracket that you mentioned is only necessary if there is not a flange on the axle, since your's has a 5 bolt design, it's already installed. There are 3 potential sizes of lug studs that mount the wheel and tire, 1/2", 9/16" and 5/8", so you want to check the size so you can use your current wheels and lug nuts. All of the kits will give you a 8 on 6 1/2" bolt...
    view full answer...
  • Best Parts Needed to Convert Dexter 7,000 lb Trailer Axles to Electric Over Hydraulic Disc
    For your Dexter 7k Axles we have the Dexter disc brake kit part # K71-694-695-10 which comes with the brake and hub parts for both sides of the axle. Then for a kit that includes the actuator, breakaway, 7-way kit and juntion box you'd want the part # HS381-9067. For a tandem axle brake line kit that's 25 feet long for the main line we have the part # HS496-252. You will need a brake controller that is compatible with this style of brakes. For that the best option is the Prodigy P3 part...
    view full answer...
  • Parts Needed to Convert Trailer with Tandem Dexter 7k Axles to Electric Over Hydraulic Disc
    Yes, the Dexter Disc Brake Kit - 12-1/4" Hub/Rotor - Grease - 8 on 6-1/2 - E-Coat # K71-694-695-10 that you referenced does fit your 7k Dexter axles. You'd need a quantity of two of these since you have a tandem axle setup and this is enough for a single axle. The Kodiak Disc Brake Kit - 13 Hub/Rotor - 8 on 6-1/2 - E-Coat - 7,000 lbs # K2HR79E also fits too. Or another really great and simple solution I recommend is the Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 13"...
    view full answer...
  • Converting Three 7,000 Pound Dexter Axles to Electric Over Hydraulic Brakes
    I can certainly help you out with a disc brake set up on your trailer. The first thing we need to find out in order to select the correct parts would be the inner and outer bearing numbers stamped into the sides of the bearings in the hubs you have now. With that information I can ensure that we get you the right parts. I would also need to know the bolt pattern of the wheels and what kind of braking system the trailer currently has. Also, do all 3 of the axles have brake mounting flanges?...
    view full answer...

Do you have a question about this Trailer Brake?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer brake information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Written by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.