bing tracking image
  1. Trailer Brakes
  2. Dexter
  3. Electric Drum Brakes
  4. 4400 lbs Axle
  5. 10 x 2-1/4 Inch Drum
  6. 14 Inch Wheel
  7. 14-1/2 Inch Wheel
  8. 15 Inch Wheel
Dexter Electric Brake Kit for 4.4K Axles Manufactured Before May 2009 - 10" - Left/Right Hand

Dexter Electric Brake Kit for 4.4K Axles Manufactured Before May 2009 - 10" - Left/Right Hand

Item # 23-454-455
Our Price: $238.21
Trailer Brakes
This item qualifies for Free Shipping
Shipping Weight: 23 lbs
Quantity: 
In Stock
Dexter Trailer Brakes - 23-454-455
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
10" x 2-1/4" Driver's-side and passenger's-side electric trailer brake assemblies fit 4,400-lb axles manufactured prior to May 2009 that have a 2.83" x 2.83" brake mounting flange. Fit 14" to 15" wheels. Great Prices for the best trailer brakes from Dexter. Dexter Electric Brake Kit for 4.4K Axles Manufactured Before May 2009 - 10" - Left/Right Hand part number 23-454-455 can be ordered online at etrailer.com or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (7)
  • Q & A (0)
  • Photos
  • Why etrailer?

Dexter Trailer Brakes - 23-454-455

  • Electric Drum Brakes
  • 4400 lbs Axle
  • 10 x 2-1/4 Inch Drum
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • Boat Trailer
  • Camper
  • Car Hauler
  • Snow Trailer
  • Utility Trailer
  • Manual Adjust
  • Dexter

10" x 2-1/4" Driver's-side and passenger's-side electric trailer brake assemblies fit 4,400-lb axles manufactured prior to May 2009 that have a 2.83" x 2.83" brake mounting flange. Fit 14" to 15" wheels.


Features:

  • Electric brakes are easier to install and offer more user control than hydraulic brakes
    • Require only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary
  • Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes
  • Left-hand (driver's-side) brake assembly, right-hand (passenger's-side) brake assembly, mounting bolts, and nuts included
  • Made in the USA


Specs:

  • Application: axles manufactured prior to May 2009
    • Does not work with AL-KO 4,400-lb axles due to clearance issues with the brake mounting flange
  • Dimensions: 10" diameter x 2-1/4" wide
  • Mounting flange: 4 bolt
    • Mounting flange bolt hole distance: 2-13/16" apart on center
  • Wheel size: 14", 14-1/2", and 15"
  • Axle rating: 4,400 lbs


23-454 Dexter 10" Manual Adjust Electric Brake Assembly for 4,400-lb AxlesManufactured before May, 2009 - Driver's Side

23-455 Dexter 10" Manual Adjust Electric Brake Assembly for 4,400-lb AxlesManufactured before May, 2009 - Passenger's Side





Customer Satisfaction Score:


Customer Reviews

Dexter Electric Brake Kit for 4.4K Axles Manufactured Before May 2009 - 10" - Left/Right Hand - 23-454-455

Average Customer Rating:  4.6 out of 5 stars   (7 Customer Reviews)

10" x 2-1/4" Driver's-side and passenger's-side electric trailer brake assemblies fit 4,400-lb axles manufactured prior to May 2009 that have a 2.83" x 2.83" brake mounting flange. Fit 14" to 15" wheels.

by:

They worked but not great. I'm hoping that they'll break in at some point. Would be nice to get more dimensions (on all the trailer brakes at eTrailer). But, they instaled ok and etrailer's customer service is top notch.




by:

Fantastic customer service!
Very helpful
over the phone, under promised and
over delivered. Just great to work with :)




by:

Have had these brakes on the trailer for one year, and we have put approximately 4500 miles on them. They have performed flawlessly.


Comments
Absolutely no problems with these after another year with 2000 more miles on them.
Brett - 06/08/2021


by:

Simple way to replace your brakes on trailer. Everything is new, springs, brake pads, etc. Highly recommended.




by:

purchased 2 set of these 10" electric brake kits for my 4.4k axles, very hard to find but talked with etrailer said they could help me out and had them in 3 days. AWESOME.However upon mounting them and installing the drum, realized the new mounting plate was 1/4' to 3/8" thicker than the old one not allowing the drum to go on far enough before hitting brake pad bracket. Had to remove new pads,springs,magnet and adjuster and mount to old bracket for it to work. was not as cut and dried as i thought it would be, hopefully i can get a little refund for the new mounting plate that i could not use.




by:

I was extremely surprised with the positive response with their customer service, error on my part ordering the wrong part. Extremely quick delivery exchange (2days) living on the Canadian West Coast.
The brakes are doing their job great, easy installation using etrailer tutorial videos. Great company will use again.




by:

All the parts have arrived earlier than predicted. Thanks for the help finding the correct parts I needed.



7
7

See what our Experts say about this Dexter Trailer Brakes

  • Parts Needed to Replace Electric Brakes on 2006 Jayco 12HW
    Since your drums are designed for 10" brakes, and it looks like you've got a 4400-lbs Dexter axle on your 2006 Jayco 12HW the replacement brakes you're looking for are the Dexter Electric Brake Kit for 4.4K Axles Manufactured Before May 2009 - 10" - Left/Right Hand # 23-454-455.
    view full answer...
  • Brakes Will Not Stop Trailer After New Backing Plates and Adjusting
    Yes, it is possible that the brakes are not powerful enough to stop the trailer. However, if you have the correct braking assemblies that match the axle capacity then this should not be a problem so long as the trailer is not overloaded. That said, the 3,500 lb braking assemblies and some 4,400 lb braking assemblies have the same 4 bolt pattern and 10" x 2-1/4" dimensions so you could try these higher rated assemblies out to see if they can help stop the trailer, the Dexter Electric Brake...
    view full answer...
  • Replacement Brake Assemblies for Dexter Axles on TrailKing TK8U
    Since we know you have a Dexter axle setup and the current assemblies are 10 inch by 2-1/4 inch we know that the correct brake assemblies you'd need are the # 23-468-469 for a set that includes a left and a right which are self-adjusting. The part number # 23-454-455 would be if you had the older 4,400 lb axles which are quite a bit rarer. Measure the diameter of the axle and if it's 2-3/8 inch that would verify it's a 3,500 lb axle and correct kit would be # 23-468-469.
    view full answer...
  • Dexter 10 x 2-1/4 Inch Brake Assembly with Different Bolt Hole Spacing
    A 10 x 2-1/4 inch brake assembly would typically be found on a 3500 lb axle, and would use a 4 bolt mounting flange whose holes are 2-7/8 inches apart on center. However, there was an exception. Before May of 2009, Dexter manufactured a 4400 lb capacity axle that used mounting flanges that had holes that were 2-13/16 inches on center. An example of those would be the # 23-454-455 Dexter Brake assemblies. That axle was kind of an oddity, I believe Dexter built that as a proprietary item...
    view full answer...
  • 4,400 lb Self-Adjusting Brakes for Fifth Wheel Trailer
    Thank you for the photos, though there is only one measurement there so it would be very difficult for me to tell you exactly what you currently have. That said, the most important measurement you can take is of your brake mounting flange, and I would be very surprised if the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 4.4K # K23-478-479 don't work for you. The bolt hole measurements of these brakes need to match up with your brake mounting flange,...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Dexter Electric Drum Brakes for 4000-lb Axles on 5th Wheel Trailer
    We have electric drum brakes rated for 4400-lb axles (and hydraulic drum brakes rated for 3750- and 5200-lb axles) but none rated for exactly 4000-lbs. For electric drum brakes in the 10 x 2-1/4-inch size for a 5th wheel the 4400-lb-rated brakes will be fine. I suggest using Dexter kit # K23-462-463-00 which is a left- and right-hand set of manual-adjust brakes with the 4-bolt mounting pattern. These work with trailer wheels from 13- to 15-inches. When you install the new brakes either...
    view full answer...
  • Replacement Electric Brakes for 4,200 lb Axle on Coachmen Apex Nano Trailer
    Though I would not be able to answer for parts that are on your trailer now, it is a good idea for your brakes to match your axle's weight capacity. As for a replacement, I could not find a reference to the brakes you have now, and the only replacements that fit a 10" x 2-1/4" drum have a 4-bolt mounting flange or a very specific 4-bolt flange with 2.83" x 2.83" spacing. Since the brake kit you referenced has a 4-bolt flange do you have 2.83" x 2.83" spacing or need a different size?
    view full answer...
    Image 1 for
  • Replacement Electric Brake Kit for 2005 Keystone Sprinter Travel Trailer
    If you have the original 4,400 lb axle on your 2005 Sprinter travel trailer then the 10" Dexter Electric Brake Kit for 4.4K Axles Manufactured Before May 2009 # 23-454-455 is the kit that you need. If your 4,400 lb axle is made after 2009 then you need the Dexter Electric Trailer Brake Kit # K23-462-463-00 instead. Attached are some review videos for you to check out.
    view full answer...
  • Replacement Electric Brakes for a Dexter 4,400 Pound Trailer Axle
    There should be a tag or information stamped into the axle. It sounds like you have the D44 axle which is a 4,400 pound Dexter axle. If it was made after May 1, 2009 then Dexter lists brakes # K23-462-463-00 as the correct brakes for the axle. If the axle was made before May 1, 2009 then the correct brakes are # 23-454-455.
    view full answer...
  • Choosing the Correct 10 x 2-1/4 Inch Electric Brakes
    The brakes need to fit the axle. Or more specifically the hubs and the brake mounting flanges on the axle. One thing that may be confusing you is that brake assemblies for 4,400 pound axles and those for 3,500 pound axles are both 10 x 2-1/4 inches. The difference will be the brake mounting flange bolt hole pattern. If your axle is a indeed a 3,500 pound axle # AKEBRK-35-SA will work for you. The mounting bolts are included but you need part # BRKH10B for the nuts and lock washers. If...
    view full answer...
  • Correct Replacement Hub for Trailer with 1.37" Inner and 1.25" Outer Bearing
    Yes, we do offer a hub/drum assembly which uses a 1.37" inner bearing and 1.25" outer bearing, the Trailer Hub and Drum Assembly part # 8-407-5UC3-EZ. If you're looking for braking assemblies as well, the Dexter Electric Trailer Brake Kit part # 23-454-455 is for axles made before 5/2009 and part # K23-462-463-00 is for axles made after 5/2009. The date of mfg is on the axle tag in the center of the beam.
    view full answer...

Do you have a question about this Trailer Brake?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer brake information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Wilson B
Updated by:
Wilson B
Employee Noah M
Updated by:
Noah M
Employee Carrie F
Updated by:
Carrie F
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-636-306-4830