Price: $3.08

Replacement Trailer Hub Bearing - LM67048

Item # LM67048

lowest price pledge


Our Price: $3.08

Orders above $99 qualify for Free Shipping


In Stock
zoom in icon
zoom out icon
pop out icon replay 360 icon
horizontal rotate icon

Product Images

etrailer trailer bearings races seals caps race lm67010
etrailer trailer bearings races seals caps standard race lm67010 lm67048
etrailer trailer bearings races seals caps standard bearing lm67048
etrailer trailer bearings races seals caps standard bearing lm67048

  • Bearings
  • Standard Bearings
  • 1.250 Inch I.D.
  • etrailer
  • 5000 lbs Axle
  • 6000 lbs Axle
  • Bearing LM67048
  • Race LM67010
High-quality, tapered roller bearing is designed for high-speed use. Replacement part uses industry-standard number. Lowest Prices for the best trailer bearings races seals caps from etrailer. Replacement Trailer Hub Bearing - LM67048 part number LM67048 can be ordered online at or call 800-298-8924 for expert service.

etrailer Trailer Bearings Races Seals Caps - LM67048

High-quality, tapered roller bearing is designed for high-speed use. Replacement part uses industry-standard number.


  • Inner diameter: 1.250"
  • Matching race (sold separately): LM67010
  • Application: outer bearing for 8-201-5 and 8-213-5 hubs

LM67048 Replacement Bearing

Related Products

Customers compare LM67048 to these similar products

Customers Who Purchased This Trailer Bearings Races Seals Caps Also Bought...

Video of Replacement Trailer Hub Bearing - LM67048

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Repacking Trailer Bearings Demonstration

Today on This Old Trailer were going to show you how to repack the wheel bearings on a disc brake set-up. We have already gone ahead and removed our wheel and tire from the trailer. We began by removing the dust cap off the end of the axle. We will need to remove our caliper bracket. We will undo the two bolts here on the back side, where we can then undo the bracket and set it off to the side. We will also go ahead and remove the outside brake pad.

Now here in the center of the axle, where we removed the dust cap, we will need to clean the grease off so that we can see the cotter pin. We will then remove the cotter pin and the nut stop where we can now undo the nut with a pair of channel locks. This nut should not be very tight. After removing the nut, we can go ahead and pull the hub of our axle off. Now you will notice with the hub off that our spindle is exposed.

We can go ahead and clean the spindle off and make sure that its in good working order. We will make sure that it does not have any scratches or nicks in the seal surfaces as well as on the bearing surfaces. With that done we will move over here to our hub where we can remove the bearing from the outside. Now when removing the bearing we will also be pulling out the flat washer. We can go ahead and set them off to the side.

Leave the flat washer with the bearing just to indicate which side that bearing came from. We will now flip the hub over where you will notice there is a seal. This grease seal will need to be removed. Now when removing the seal you will probably damage it, but its a good idea to go ahead and replace them anyway. There are several ways to remove a grease seal. You can use a large screwdriver or pry bar.

You can use a seal remover tool or you can use a hammer and a punch. Now these seals are a tight fit so they will require some work to get them out. Once the seals removed we can go ahead and remove the bearing and set it off to the side. We will now clean all the grease out of our hub. We will be using Brake-Clean to help break down the grease so that we can remove it from the hub. We will also want to inspect the bearing races here and on the other side here. Again we will want to make sure that the races are in one piece without any cracks, chips, or scars in them. Now that we have confirmed our races are good, we will set our hub off to the side. We will now take the bearings and clean each individual bearing using Brake-Clean and some shop towels. We will go ahead and clean up the nut and the nut stop as well, getting as much of the old grease out of the way as possible. Now we have got both bearings, the flat washer, our nut, and nut stop all cleaned up. We have got our new seal. We will begin by repacking the wheel bearings. Now there are several ways to repack wheel bearings. We are going to go ahead and use a bearing repack tool, as this does seem to get the job done the best. Now to use a bearing repacker, we will go ahead and place the bearing into the tool and bring the cone down over the bearing. Well then apply pressure and allow the grease to come out the backside of the bearing. We can then remove the cone and the bearing and make sure that the grease surrounds all bearing surfaces. We can then drop it into our hub here on the backside. With that done were ready to install our new grease seal. We will place the seal into position and using a ball-peen hammer well lightly tap it into place. Now that the seal is in place well flip our hub over and repack the outside bearing and install it into the hub. With that done well take our hub assembly and slide it over the spindle of our axle into place. We can then install our flat washer and our nut using the channel locks to lightly snug the nut down. We will put the nut stop on and using a new cotter pin well slide it into place and bend it around. With that done we can reinstall our bearing cap dust cover. We will now reinstall our brake caliper. That will complete the process of repacking wheel bearings on a trailer with disc brakes.

Customer Reviews

Replacement Trailer Hub Bearing - LM67048 - LM67048

Average Customer Rating:  4.8 out of 5 stars   (55 Customer Reviews)

High-quality, tapered roller bearing is designed for high-speed use. Replacement part uses industry-standard number.

- LM67048

by: Roger z08/07/2017

Michelle ...I appreciate the expertise that you used in putting together a wheel/bearing package. Everything was fine ,delivery was speedy ...2 days The packing person really made a mess. The hub assemblies were allowed to come out of their poorly packed box. The hubs bent one of the bearings and 2 seals. The bearings and seals were in an unprotected plastic bag...not in a protection box... Fortunately, I called and the damaged parts were sent to me,quickly I might add. I hope you can review the packing process ,and solve this issue 417434

- LM67048

by: Roger A.10/13/2016

I have a boat trailer that requires wheel bearings and seals periodically. It is 20 years old but I easily found replacements at I bookmarked the parts so I can get them easily next time. Noticed that the original bearings were made in England, the recent ones are made in China and are of equivalent excellent quality. Delivery was prompt, packing very good. Good retailer. 306950

- LM67048

by: James05/03/2016

Removed trailer outer bearing to find a scored "race". Customer Service, extremely helpful and patient in trying to match up a few visible number on the old bearing and race to list of available options in etrailer's stock. Part was a perfect match, pressed in race. assembled hub and wheel, and back in business. 248349

- LM67048

by: Byo08/31/2016

I had a non standard axle, so had to call and verify bearings. Was very pleased with the service and that the person on the other end was very easy to understand. Shipment was fast and the parts fit. The price was very competitive. 290300

- LM67048

by: Tim L.06/06/2012

Good quality - matched fit - very happy with product. I also bought the outer race and seal to go with it as well as bearing cap for the axle. Impressed with the wide range of bearings eTrailer carries, making selection very easy. 42956

- LM67048

by: Robert O05/24/2017

I lost a wheel and brake drum and limped into the campground. I called etrailer and ordered the parts through Lazer. My parts arrived the next day and the order was 100% correct. I am safe at home and am one happy camper. 384487

- LM67048

by: RLB11/10/2016

When repacking my bearings one showed evidence of wear. I hope this one will last as long or longer than the original. Time will tell but it looks to be of high quality with very little slop on the rollers themselves. 315445

- LM67048

by: Crankbait0903/31/2014

Item as described. I have never replaced wheel bearings/seals, I always had someone else do it. This time I tried it on my own, and the parts I ordered/received fit as expected and all is well. thank you etrailer! 122894

- LM67048

by: harold f12/01/2016

The replacement parts I ordered were just what I needed. The sales person was very knowledgeable and helpful. My order was processed very fast and shipped the same day as ordered. Very good parts and service. 322636

- LM67048

by: Gary09/29/2016

All the bearings, races, and seals I have purchased from etrailer have been good quality and have never failed. I have used them in my travel trailer for many years. 301536

- LM67048

by: Shane08/04/2017

Great products and fast service. I ordered the bearings, race and seals. I ordered the wrong seals so haven't been able to complete. I must have misread something. 418819

- LM67048

by: Vince W.02/10/2011

When I received the bearings. The first thing I did was to inspect them to make sure I had the bearing needed to do the job. It was just what I ordered. 6961

- LM67048

by: Theresa11/06/2017

Very patient and helpful over the phone. Great prices, quick delivery. Happy we found this sight for our travel trailer parts. Thank you 449415

- LM67048

by: Jerry H10/06/2014

The bearings are working great in my trailer hubs, they were exactly what was ordered and delivery was on time 154706

- LM67048

by: Pat B01/19/2017

My bearings came today, everything looks good and delivery was pretty quick for the standard delivery rate. 336977

- LM67048

by: ralph f08/01/2012

great online catalog,these bearings were just what i needed and i couldnt believe how fast the shipping was! 50180

- LM67048

by: Mike d. Buffalo ny06/20/2017

Fantastic..don't bother even looking anywhere else for trailer parts, nobody can touch their pricing 396484

- LM67048

by: Jason T.08/13/2012

50% cheaper than the local parts store and the same quality! Highly recommend! These are good parts. 51475

- LM67048

by: Gordon F.08/24/2012

My order was shipped the same day I ordered and received the exact date they showed. Gordon F. 52880

- LM67048

by: William L.05/13/2013

The bearings have the correct item number stamped on them and have the correct dimensions. 79982

- LM67048

by: Al s.05/26/2017

Product looks to be of quality and the delivery was very quick. Highly recommended vendor 386621

- LM67048

by: KnotRod09/27/2016

The parts that I needed, direct to my door with great prices, service and delivery. 300821

- LM67048

by: Brandon C05/04/2017

Bearings have held up great after a year of use, great quality product. 376721

- LM67048

by: Terry M08/04/2016

All bearing , races and seal exactly what I needed all running true 279489

- LM67048

by: Doug G05/21/2014

Installed bearings, will take some miles to see how they hold up 131559

- LM67048

by: Armand09/05/2017

The most common wheel bearing at the absolute best price!!! 428983

- LM67048

by: Vasok Tretyak05/19/2017

Great price, customer service, and fast delivery Thanks 382572

- LM67048

by: Roy F.08/02/2013

Good Product, Excellent Service and Super Fast Shipping. 92982

- LM67048

by: Jim S.12/20/2012

Just installed fits perfect and works great! Thank You! 61832

- LM67048

by: Pete G04/03/2017

Received Trailer bearings and misc parts as ordered. 361906

- LM67048

by: Power house09/02/2017

Work great turns better than proud of y all 428089

- LM67048

by: SFB08/19/2016

Had products in stock at reasonable pri ce. 285623

- LM67048

by: Timothy05/12/2016

Right product, right price, fast shippi ng! 249998

- LM67048

by: Steve08/17/2017

Thanks, will be back for the next trail er 421379

- LM67048

by: Ray-man09/06/2016

They worked just the way i would expect. 291758

- LM67048

by: Wayne04/29/2016

Works good, price great- will order more 247545

- LM67048

by: MUNSTER06/07/2017


- LM67048

by: jim09/18/2016

Great WebSite , Fast Shipping ! 297037

- LM67048

by: Mike05/09/2016

Product worked as advertised! 249258

- LM67048

by: Bob01/01/2017

Great price, quick delivery. 331147

- LM67048

by: jeff f.05/14/2012

product works as it should. 40482

- LM67048

by: Eric G09/25/2016

Fit perfect. Great price. 299764

- LM67048

by: Dan S.07/31/2012

Good quality for the price 49963

- LM67048

by: RAYMOND WIENEKE09/14/2016


- LM67048

by: john c05/08/2013

seem to be good bearings. 79355

- LM67048

by: Paul05/07/2013

Exactly what I needed. 79328

- LM67048

by: Mitch04/27/2017

Always great service! 374822

- LM67048

by: jeff10/23/2011

very good very fast 25979

- LM67048

by: Dave M.07/26/2011

Great price and fit 20324

- LM67048

by: Kevin06/13/2017

Fit like a glove! 392510

Show More Reviews

Ask the Experts about this etrailer Trailer Bearings Races Seals Caps
Do you have a question about this Trailer Bearings Races Seals Cap?

  • How to Determine the Correct Parts for a Bearing Kit for a 5,200 lb Dexter Trailer Axle
  • For your 2006 Colorado fifth-wheel trailer with 5,200 lb EZ Lube axles, there are a couple of possibilities. The best way to determine the correct parts is to disassemble a hub on one side of the trailer and get the bearing part numbers off of the bearings that are on the spindle. I put together a drawing showing where part numbers are and/or how to measure to determine the correct parts for trailer hub and drum assemblies, see link. If your hubs have a 6 on 5-1/2 inch bolt circle, you...
    view full answer...

  • Replacement Hub for a 3/4 Inch Diameter Straight Spindle
  • The only hub we have that is associated with a 3/4 inch spindle is # AH15450ECOMP. This is an agricultural hub that takes inner bearing # LM67048 and outer bearing # LM11949. But the spindle it fits on is not straight, it is tapered, # AS1500E. If this is a kit trailer then in order to replace the hubs, wheels, and tires you are going to have to replace the axle. I have included a link to the right to the straight axles and the axle-less systems that we have. The axle-less systems may...
    view full answer...

  • Recommended Replacement Wheel Bearings On An Airstream Trailer
  • Yes, the Replacement Trailer Hub Bearing, # 25580, is the replacement for the Airstream trailer bearing 4T-25580. It has an inner diameter of 1.750 inches and has the same outer diameter as well. If the (back)INNER bearing is the 4T-25580, then there are 3 different common outer bearing combinations. If you have a 6,000 lb axle, the outer bearing will be # 15123 and grease seal # RG06-070 will be needed as well. The bearing kit that includes these 3 parts is # BK3-100. If you...
    view full answer...

  • Capacity of Axle Using Outer Bearing LM67048 and Inner Bearing 25580
  • For an axle using outer bearing # LM67048 and inner bearing # 25580 I can narrow it down to having a capacity of 5,200 or 6,000 lbs. In the case of replacement hubs for the axle, the hub assemblies for either will work for you. I have included a link to these for you. You'll need your wheel bolt pattern in order to narrow the results. The most common is going to be the 6 on 5-1/2 bolt pattern. For this you could use # 8-213-5UC1 for a wheel hub assembly and # 8-201-5UC3 for a hub and...
    view full answer...

  • Is TruRyde Outer Bearing # LM67048 Equal to Timken Bearing 02475
  • The outer bearing in the TruRyde Bearing Kit, part # BK3-300, is part # LM67048. This outer bearing has an internal diameter of 1.25 inches and uses a bearing race # LM67010 with an outer diameter of 2.328 inches. The bearing kit # BK3-300 is designed for 5,200-lbs axle, 6,000-lbs axle, and 7,000-lbs axle. I looked up a Timken # 02475 bearing and it also shows an internal diameter of 1.25 inches, but is rated for a larger 8,000-lb axle, so it will be used on a larger hub with a different...
    view full answer...

  • Bearing/Race/Seal Kit for Boat Trailer w/ NOK AD7131E Seal 25580 Inner and LM67048 Outer Bearing
  • Although we don't have a kit that includes the bearings/seal all in one package, you can certainly obtain the parts separately. You'll need: # 25580 inner bearing and its # 25520 race # LM67048 outer bearing and its # LM67010 race # 21325 Double Lip Grease Seal (cross references to the NOK seal you referenced) # 5-101 spindle washer # 165649 cotter pin I'll link you to our FAQ article about replacing bearings, races and seals.
    view full answer...

  • Identifying Replacement Wheel Bearings for Unknown Hubs on Boat Trailer
  • The easiest way to identify the needed replacement bearing kit is to obtain the reference numbers off the existing bearings. Your best bet would be to clean the existing bearings and closely examine them for the reference numbers. Given the inside diameter you provided, the bearings could be a # LM67048, # 15123 or # 14125A, all of which have a 1.25 inch inside diameter. All three bearings are listed as outer bearings for certain hubs, none of the hubs we offer would use these as both...
    view full answer...

  • It sounds like you've got an unusual hub. I was able to find a Spindle Grease Seal Set for # LM67048 Inner Bearing and 2.33 Bearing Buddy, part # BB60008. This grease seal has an inner diameter of 1.875 and an outer diameter of 2.33, which sounds like the size you need. I did some measurements for you and found that the measurement from the inside of the inner race to the inside of the outer race is 2-1/4". The measurement from the outside of the inner race to the outside of the outer...
    view full answer...

  • Replacing Bearings, Races, Seals and Dust Caps on a 5th Wheel Trailer
  • Yes, the Dexter axle part number 4003321 you referenced works with the hub and drum assembly part # 8-201-5UC3-EZ which is a 5,200 pound axle. The hub pattern is 6 on 5-1/2. The parts you will need are inner bearing # 25580 (4) and outer bearing # LM67048 (4). You will need seals # RG06-090 and dust cap # RG04-080. The seal and dust cap will come as a pair. I have included a FAQ and multiple videos for you too.
    view full answer...

  • Needing Bearing and Seal Replacement for Lippert Axle
  • I found a bearing and seals that will fit your Lippert Axles. According to the manufacturer on the 5,200 lbs axles, the outer bearing number is # LM67048, the inner bearing is # 25580 and the grease seal will be 10-36, # RG06-070. Now, before you order your parts, you will need to remove the wheel and hubs to inspect the bearings to see if the bearing numbers are match to the ones listed above. If they match then you will need # BK3-300. This is a bearing kit that will include both...
    view full answer...

  • New Spindles, Hubs, Tires, and Wheels for a Canoga Concrete Mixer/Trailer
  • The LM67048 is a pretty large bearing for a trailer that only weighs 400 pounds. So there isn't a hub that uses that bearing as both the inner and the outer. But if you are willing to remove the old spindles and have new ones welded on then I do have a solution for you. First for the spindles: I recommend a BT8 spindle # SP204BT8 for a square stub or # R104BT8 for a round stub. These spindles are usually found on 2,000 pound axles so they have plenty of capacity for your cement mixer...
    view full answer...

  • Bearing Kit Recommendation for a Dexter 2800 lb Axle
  • The bearings you would need are inner bearing # LM67048, outer bearing # L44649 with a # 10-42 seal. We don't have this as a kit but you can order each individually. We contacted Dexter and they informed us that you axle was made specifically for Fleetwood in Canada and they don't use the standard 3.5k bearing setup.
    view full answer...

  • Replacement Idler and Hub Drum Using LM67048 and 25580 Bearings with 2.25 I.D. Grease Seal
  • It sounds like you have two 5200 or 6000 lb capacity axles with a 6 on 5-1/2 bolt pattern. If this is the case, we have some hubs that will work for you. If you have EZ lube spindles, you would need the # 8-213-5UC1-EZ idler hub, and the # 8-201-5UC3-EZ hub/ drum. If you have standard spindles, you would need the # 8-213-5UC1 idler hub, and the # 8-201-5UC3 hub/ drum. The hubs include bearings, races, a grease seal and dust cap but the included grease seal will have the wrong inside...
    view full answer...

  • Trailer Spindles to Fit Inner Bearing L68149 and Outer Bearing LM67048
  • The inner diameter of bearing # L68149 is 1.378 inches and the inner diameter of bearing # LM67048 is 1.250 inches. If you refer to the linked page showing all of our trailer spindles you will note that we do not have one with this particular combination of inner and outer bearing diameters. On the linked chart please refer to columns C and D, which indicate the inner diameters of the inner and outer bearings for each spindle shown. Also, please note that we do not have any hub assemblies...
    view full answer...

  • What Bearings Seals Brakes and Tires to Use for 4400 lb Axels on a 2004 Airstream 30 Feet Long
  • I did a little research and found that the National Seal, 442109, has an inner diameter of 2.25 inches and an outer diameter of 3.376 inches. We carry two seals that can be used as a replacement for this seal. If your hubs have greased bearings you should use the TruRyde Grease Seal, item # GS-2250DL, or the TruRyde Grease Seals, item # RG06-070 (pair), which is a double lip seal and if your hubs have oil bath bearings, use Oil seal # 10-63. Your inner bearing should match up with the...
    view full answer...

  • Can Dexter 8-222 Hub be Replaced with 6 on 5-1/2 Inch Hub on Tandem 4 Ton Trailer
  • I did some research on your Dexter 8-222 Hub and was able to find the inner and outer bearing numbers as well as the grease seal used. It looks like this particular hub was designed for mobile homes and these, for the most part, have more unique bearings and bolt patterns because they are technically manufactured for one time use only and not meant to be altered or replaced. Because of this, there is unfortunately not a 6 on 5-1/2 inch hub available that will be compatible with your...
    view full answer...

  • Replacement Bearings and Brakes for 2015 Keystone Outback with 4,400 Pound AL-KO Axles
  • From my research your trailer uses: Bearings # L68149 and # LM67048 Races # L68111 and # LM67010 10-19 Grease Seal # RG06-050 You'll want to check the ones currently on your trailer to verify. We don't have a bearing kit with them all but you can get them separately. Or we do sell them with a hub an drum that has a 6 on 5-1/2 bolt pattern, part # 8-407-5UC3-EZ. I recommend using an LMX Red Grease # L10321. For the brake assemblies we have the Dexter Nev-R-Adjust # K23-478-479....
    view full answer...

  • Replacement Trailer Bearings and Seals for 4,400 Pound Dexter Axle
  • You'll want to make sure your bearing numbers and dimensions match but for a Dexter 4,400 pound axle you should need inner bearing # L68149 which is 1.378 inches with race # L68111, and outer bearing # LM67048 that is 1.250 inches with race # LM67010. The seal is # RG06-050. If you need the entire hub assembly with a 6 on 5-1/2 bolt pattern it's # 8-407-5UC3-EZ.
    view full answer...

  • Trailer Bearing Available with Inner Diameter of 1.25 inches
  • We may have the bearings you need, but the spindle dimensions you have aren't standard hub dimensions so you may have something that there aren't replacement parts for. For a bearing that has an inner diameter of 1.25 inches and an outer diameter of 2.328 inches you would want the part # LM67048. For a grease seal that matches your dimensions you would want the part # SL150. The components you listed don't match anything we have so we wouldn't' be able to give you a weight capacity.
    view full answer...

  • Replacement Hubs for Old Trailer That Uses Inner and Outer Bearing LM67048
  • First, thank you for providing those important details about your trailer. Bearing part # LM67048 is a common OUTER bearing for 6- and 8-lug hubs, but as an INNER bearing we offer only one 4-on-5 agricultural hub that takes this item as its inner bearing. That hub is part # AH15450ECOMP. I presume that you got the bearing part numbers from the original parts. Given the trailer's age it may be that someone previously substituted a different bearing for what was originally installed....
    view full answer...

  • Replacement LM67048 Bearing for a Trailer Hub
  • You have an interesting combination of bearings on your trailer hub. We carry the # LM67048 bearing, but the other bearing we don't so you would have to source it elsewhere. I searched the number online and was able to find a couple places that had it. For a seal I believe the # GS-2125DL would work since it is very close in dimensions to what you listed. The inner diameter is 2.125 so it is a tiny bit bigger than what you said you have. To verify that it will fit you will need to use...
    view full answer...

  • What Spindle is Needed for LM67048 Inner and LM11949 Outer Bearings
  • The spindle we show for the # LM67048 inner and # LM11949 outer bearing is the # AS1500E Agricultural Spindle. We do not list the distance between the inner and outer bearing so I cannot verify that dimension for you. You can order the spindle, item # AS1500E, using the link below if you like.
    view full answer...

  • Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
  • The inner diameters of the LM67048 and 15123 both are the same (1.250 inches). That means that a hub with either bearing in the outer bearing would fit your spindle. The part # AKHD-655-6-EZ-K would fit your axle.
    view full answer...

  • Which Bearings, Races, and Seal Fit Dexter Hubs 8-283
  • For the inner bearing you need # LM67048 and race # LM67010. The outer bearing is # L44649 and race # L44610. The seal is # 10-42.
    view full answer...

  • Replacement Brakes and Hub Assemblies for Lippert 5,200 Pound Axle
  • For your trailer the drums you need are # 8-201-5. They're designed to fit bearings # 25580 and # LM67048 with the 2-1/4 inch seal # GS-2250DL. For brakes I recommend # AKEBRK-7-SA. Both the left and right sides are included. They are side specific so you'll want to pay attention to the labels when installing. They're self-adjusting brakes so they'll need to be adjusted when you install them and then never again. The grease cap to fit the hubs is # RG04-080 if you have E-Z lube...
    view full answer...

  • Looking for Replacement Bearings for Axle Using # L68149 Inner Bearing
  • The # L68149 bearing you mentioned is most commonly used with the # L44649 outer bearing, but it is sometimes used with the # LM67048 outer bearing, as well. If you can't read the reference number of your outer inner bearing, you can always use a digital caliper to measure the diameter of the spindle where that bearing rides. If that diameter is abut 1.06, you'll need the L44649 bearing. If the diameter you get is about 1.25 inches, you'll need the # LM67048. The # BK2-100 bearing...
    view full answer...

  • What are the Correct Bearings and Races for Dexter 8-201 Electric Drum Brakes?
  • The Dexter hub you referenced, 8-201, is a 5,200 lb hub, though a 5 on 4-1/2 bolt pattern does not come on 5,200 lb hubs. The correct bearings for the 5,200 lb hub are # 25580 and # LM67048, while the proper races are # 25520 and # LM67010. I have attached a link to a help article on wheel bearings that you may find useful. If you can provide the diameter of the brake assemblies and/or the axle capacity, I would be happy to make a specific recommendation for you.
    view full answer...

Do you have a question about this Trailer Bearings Races Seals Cap?

  • Why

    At we guarantee:

  • Highest quality trailer bearings races seals caps for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer bearings races seals cap information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael L
Expert Research:
Patrick B
Expert Research:
Michael H
Installed by:
Jeff D
Expert Research:
Jameson C
Video Edited:
Joshua S
Expert Research:
Adam R
Expert Research:
Jeffrey L
Updated by:
Sarah W

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

About Us
photos and videos

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.


Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.