Lowest Prices for the best trailer bearings races seals from etrailer. Replacement Race - L68110 part number L68110 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
Select Vehicle:change vehicle

Price: $13.77

Replacement Race - L68110

Item # L68110

lowest price pledge

Our Price: $13.77

Orders above $99 qualify for free shipping


In Stock.
zoom in icon
zoom out icon
pop out icon replay 360 icon
horizontal rotate icon

Product Images

etrailer Trailer Bearings Races Seal
etrailer Trailer Bearings Races Seal

Customer Photos

etrailer Trailer Bearings Races Seal


  • Races
  • 3500 lbs Axle
  • 2.327 Inch O.D.
  • Bearing L68149
  • Race L68110
  • etrailer

etrailer Trailer Bearings Races Seals - L68110

  • Works with bearings L68149
  • Qty. 1 race
  • Outer diameter: 2.327

L68110 Replacement Race - L68110

Video of Replacement Race - L68110

Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.

Video Transcript for etrailer Trailer Bearings and Races L68110 Review

Today we're going to take a look at the replacement bearing race 00:00:02 for the L68149 bearing. Now this race will provide the smooth surface for your bearing to roll on inside of your trailer hub. Typically if you have to get new bearings it is a good idea to also replace the races when you do that. The races do need to be pressed into the trailer hub. This is the replacement part, will use the industry standard number. On this race it's stamped on there, L68110.

Again the matching bearing that goes in here is a L68149 which we do sell separately on our website. I happened to pull one of those just to show you, here's the bearing. You can see how it drops right into the race. They use that just like that. Now the main measurement on the bearing race is the outer diameter which is measured edge to edge just like that. What I'm going to try to do here is give you ....

Because the measurement is in thousandths of an inch we're going to use a digital caliper readout that'll show you how that measures. If we get there on there, tighten it up, and I'm going to zoom in just a little bit. You can see outer diameter on this is 2.327 inches. That should do it for the review of the replacement bearing race for the L68149 bearing.

Customer Reviews

Replacement Race - L68110 - L68110

Average Customer Rating:  4.8 out of 5 stars   (25 Customer Reviews)

- L68110

by: Martin J.06/27/2015

Want to help out the next customer looking for the bearing, cups, and seals for 2000-01 tracker trailstar trailer. 1st you have to dismantle one of the hubs and see what trailstar decided to put in there the day they built it. You will find the rear cups and seals are considered "Special for some reason". Not a problem for etrailer, they have them in stock and the quality is excellent and are exact replacements. The parts I had to order were cup L68110, cup L44610, seal 168233, bearing L68149 and bearing L44649. Oh yeah, customer service should get a 10 star review. I had an issue with shipping co. because of new driver in my area. Etrailer got all up in their business for me and I didn't have to do anything. Customer service also called me the next day to see if everything was delivered and satisfactory. We need more companys like etrailer.com . Excellent!! 207786

- L68110

by: Michael05/11/2015

Nothing fancy as it is just a race. 191799


The race worked great for the rotorbrakes on my boat trailer.

Michael - 05/10/2016

- L68110

by: Skeeter09/05/2014

Races and seals were delivered. I was surprised that the races came with surface rust. After a few minutes of lightly sanding them, the rust was removed. Not what I expected. 150224

- L68110

by: SteveW05/19/2017

It fit the hub easily and will probably work well. L68111 that came with the kit I purchased a few years back didn't fit, so I needed this one. I only had the bearing number when I ordered the kit. It still shows the same kit with the same race number as available solution. Live and learn. 382624

- L68110

by: Team Man-Bass10/13/2016

just what I needed to repair my trailer bearings, and it fit like a glove. Installation was simple and easy, and everything is working great. Delivery was timely, and most important, correct! Your product, attentiveness/responsiveness met my expectation. Job well done! 306271

- L68110

by: George B06/22/2017

I received the correct product, on time and of good Quality. The price was excellent compared to local sources. Also the one part not common and was difficult to find on local shelves. 397448

- L68110

by: Mike holloran01/08/2016

Have not yet installed the parts in my boat trailer. I was very pleased with Pat and Rose who handled my orders. I do no net know how my returns were resolved. 235061

- L68110

by: Lawrence Lange06/02/2017

Have used etrailer for years and will continue to use them website is easy to maneuver and they always have what I want for the best price. 388982

- L68110

by: Robert H10/06/2016

Still going strong. Was the right part. Took a long time to install the first time since I was a newbie but should be faster from now on. 303730

- L68110

by: Bill H.10/04/2013

Parts arrived promptly and fit exactly as originals. I will reorder from etrailer the next time I need trailer supplies. 102613

- L68110

by: James C.07/09/2016

Fit perfectly. I am very happy with the full service you offer including the fast shipping and the order tracking. 269967

- L68110

by: Michael D.07/21/2016

Product arrived in great condition and it exactly what I needed to finish rebuild on my boat trailer 274523

- L68110

by: Jerry s03/23/2017

Everything was right on time, great sales people. All the bearings, seals, and races fit nicely. 357819

- L68110

by: Randy W.04/19/2017

Trailer bearings fit perfectly and got me back on the road with my boat. 369314

- L68110

by: Bob D05/05/2017

Easy install. Why mess around? Great customer service by this company. 377063

- L68110

by: Randy M.03/21/2017

Perfect for my boat trailer! Super fast shipping! Thanks!! 356897

- L68110

by: Neil11/01/2016

Perfect fit. Great communication and fast shipping 312880

- L68110

by: Don N.07/30/2013

What I ordered, and received in a timely manor. 92386

- L68110

by: Chris07/14/2016

The right stuff, at good price. Thank You 272049

- L68110

by: dons06/20/2016

got what i asked for. everything fits p erfect. 262840

- L68110

by: Leon K.10/21/2012

Worked perfectly. Shipped quickly. 57779

- L68110

by: Chris H.12/31/2014

Perfect fit for my trailer. 167456

- L68110

by: Josh R.03/17/2017

Good fit. Worked well. 353856

- L68110

by: bryan n07/03/2014

Everything fit perfect 139022

- L68110

by: tom c.05/16/2011

good product 14421


Ask the Experts about this etrailer Trailer Bearings Races Seals
Do you have a question about this Trailer Bearings Races Seal?

  • Difference in Bearing Race # L68111 and Bearing Race # L68110
  • Race # L68111 has an outer diameter of 2.361 inches. Race # L68110 has an outer diameter of 2.327 inches. Based on these measurements, the two races are not interchangeable. They are designed for different size hubs, but can use the same # L68149 bearing. There may not be a pre-packaged kit with the L68110 race, but you can still get all the parts you need separately. I have included a link to our bearing and race main page for you to view.
    view full answer...

  • Replacement Hub, Bearings, Races, and Seals for Trailer Hub with H-1377 Bearing
  • First, it does sound like, based on the measurement and information you have provided, that race # L68110, is correct since its outer diameter is 2.327 inches. This race is associated with bearing # L68149 which has an inner diameter of 1.378 inches and fits a number 84 spindle. On these spindles the diameter where the seal goes is 1.73 inches such as # R40484. The seal should be a tight fit. I once had a heck of a time pulling a hub off of a trailer that was held on by the seal only!...
    view full answer...

  • How to Determine Correct Bearing Buddy for 1994 Ranger Trailer with Outer Race # 68110
  • The outer race number you provided, 68110, corresponds to part # L68110 from TruRyde. This race works with bearing # L68149 and has an outer diameter of 2.327 inches. The Bearing Buddy with the closest diameter to this is part # BB2328, which is a chrome-plated pair of bearing protectors that fits a hub bore of 2.328 inches. We also offer a stainless-steel version, part # BB2328SS. You will need to confirm either the outer bearing number from your trailer spindle or take a precise...
    view full answer...

  • What is the Correct Race for Use with Bearing # L68149?
  • The # L68110 Race in my application charts works with the # L68149 bearing. We do show that the # L68149 bearing also works with the # L68111 race and this may be the application you need. The # L68149 inner bearing is paired with the # L44649 outer bearing which takes a # L44610 race. You could also order the Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal, # BK2-100, if the race mentioned above is the correct part for your application. This kit includes the...
    view full answer...

  • Which Grease Seal is Associated with L68149 Bearing and L68110 Race on a Boat Trailer Hub
  • When the L68149 bearing is paired with the L68111 race, the 10-19 grease seal is used. However when the same bearing is used with the L68110 race on a boat trailer, the # 168233 seal is usually used. You can verify this by using a digital caliper to measure the hub bore (inside diameter) where the seal would sit and the surface of the spindle where the inside diameter of the seal would ride. The hub bore should measure 2.332 inches and the surface of the spindle that the seal would...
    view full answer...

  • Replacement Race # L68110 Availability and Compatibility with the # L68149 Bearing
  • The information I have indicates that the # L68149 bearing is compatible with a # L68110 race. The L68110 race is most commonly used in boat trailers and the # L68111 is most commonly used in land based trailers. They both take the same bearing, # L68149, but use different seals and the installation surface on the hubs are different dimensions, as you have noted. Most commonly the # L68110 race is associated with the # 168233 grease seal and the # L68111 race is most commonly associated...
    view full answer...

  • Availability of Replacement Brake Pads/Bearings for Titan Hub/Rotors on # T4843700 Disc Brake Kit
  • We offer replacement bearings compatible with the hub/rotors used on the Titan Disc Brake Kit # T4843700 you mentioned. The replacement bearings are part # L68149 (inner) and # L44649 (outer). Replacement races are also available, # L68110 for the inner and # L44610 for the outer. For a replacement double-lip grease seal, use part # RG06-050. These parts are sold individually. For replacement brake pads, Titan offers part # T4870900 which includes 4 pads, enough for one axle. Having...
    view full answer...

  • Replacement Bearings And Seals For 1-3/8 Inch Trailer Axle Spindle
  • We have a grease seal that matches the dimensions you have on your trailer. The seal we offer is part # 168233. This seal has a 1.688 inside diameter and 2.332 outside diameter. The race that is designed to work with the seal is part # L68110. We also have the # L68149 bearings you mentioned, but they do not come in a kit with the race and seal mentioned. You did not say if the # L68149 is the outer or inner bearing. Since you provided accurate measurements it sounds like you have...
    view full answer...

  • Electric Over Hydraulic Disc Brake System for Dexter D35 Axles on 2002 Arctic Fox Model H
  • Both race # L68111 and race # L68110 are used with bearing # L68149. The difference is the outer diameter and that outer diameter is dependent on the hub used, not the axle or, more specifically, the spindle. So in other words if the bearings, seals, and bolt pattern match what the spindle needs then kit # T4843700 will fit. This kit includes the hubs with the races installed already and uses a 5 on 4-1/2 bolt pattern to attach the wheels to the hubs.
    view full answer...

  • Seal # 168233 and Race # L68110 Availability
  • Glad we were able to help! And that you got the correct Seal # L68110 and Seal # 168233.
    view full answer...

  • Is There a Replacement Wheel Bearing Kit That Includes # L68110 Race
  • The L68110 race, which is very common to boat trailers, is available individually and is compatible with the L68149 bearing. Although the outer diameter of the two races is pretty close (2.362 for the L68111 versus 2.327 for the L68110), I would recommend staying with the same part number as the race you are replacing. We do not have a bearing kit that includes the L68110 inner race.
    view full answer...

  • L68810 Bearing Recommendation for a L68149 Bearing
  • I have a race that will work for you. You would want a Redline Race # L68110. The outer dimensions of this race are 2.327 inches, and this will work with a # L68149 bearing. Check out the video I attached that shows the outer dimension of the # L68110 and that it works with the # L68149 bearing.
    view full answer...

  • Replacement Galvanized Hub and Drum Assemblies for Boat Trailer w/Bearings L68149 and L44649
  • We have numerous hub and drum assemblies that use inner bearing L68149 and outer bearing L44649. I have included a link to them for you. There are several different bolt patterns for hubs that take those bearings. The most common is a 5 on 4-1/2 like # 8-247-50 but to be sure you can measure for bolt pattern using the help article I have linked. The race numbers might not be an exact match but that is because they match the bearings AND the hubs so as long as the bearing numbers are...
    view full answer...

  • Recommended Replacement Bearing Kit with Race 6811
  • The race part number 6811 you referenced is likely to be part # L68111, which fits with a # L68149 bearing, or race part # L68110. The difference between these two races is their outer diameter dimension. Part # L68110 has an outer diameter of 2.327-inches while part # L68111 has an outer diameter of 2.361-inches. You'll need to measure your hub bore with a precision caliper to determine which race will fit your hub. Bearing kit # BK2-100 includes inner race # L68111.
    view full answer...

Do you have a question about this Trailer Bearings Races Seal?

  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer bearings races seals for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer bearings races seal information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? Read our Returns Policy. Please note that we cannot exchange items. You can also cancel unshipped items. Contact our Customer Service team at 800-298-8924 to find out more about how to cancel your order.

Info for this part was:

Photos by:
Theodore B

Expert Research:
Michael L

Expert Research:
Michael H

Installed by:
Jeff D

Installed by:
Randy B

Updated by:
Sarah W

Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

About Us
photos and videos

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.


Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.