1. Trailer Axles
  2. Dexter Axle
  3. 3500 lbs
  4. 89 Inch Long
  5. Leaf Spring Suspension
  6. No Hubs
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs

Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs

Item # T3584F-EZ-8974
lowest price pledge
Retail:$419.00
Our Price: $182.61
You Save: $236.39
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 34 lbs
Quantity: 
In Stock
Trailer Axles T3584F-EZ-8974 - Spindles Only - Dexter Axle
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center. EZ-Lube spindles make it easy to lubricate bearings (sold separately). Lowest Prices for the best trailer axles from Dexter Axle. Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs part number T3584F-EZ-8974 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (99)
  • Q & A (129)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Axles - T3584F-EZ-8974

  • 3500 lbs
  • 89 Inch Long
  • Leaf Spring Suspension
  • No Hubs
  • 74 Inch
  • Spindles Only
  • Dexter Axle
  • EZ-Lube Spindles

Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center. EZ-Lube spindles make it easy to lubricate bearings (sold separately).


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
    • Low ride height makes it easier to load and unload your trailer
  • Straight, EZ-Lube spindles - no drop
    • Built-in grease zerks for simple lubrication
  • Spring seats, brake flanges, and spindles are welded on
  • Limited 2-year warranty


Specs:

  • Weight capacity: 3,500 lbs
  • Hub-face-to-hub-face length: 89"
  • Spring-center-to-spring-center length: 74"
  • Flange-to-flange length: 82-5/8"
  • Tubing outer diameter: 2-3/8"
  • Spindle size: 1-1/16"
  • Bearings (sold separately):
    • Inner bearing: L68149
    • Outer bearing: L44649
  • Brake flange configuration: 4 bolt


Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


Hub Face and Spring Center Measurements on Standard Trailer Axle

Another helpful measurement to have is the flange-to-flange (C) length, which is measured from the outside of one brake flange to the outside of the one opposite. This length may be easy to obtain if you are replacing an axle, but it's important to note that this measurement is not the preferred method for determining which axle will best fit your trailer.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


Dexter Axles

Dexter axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.



T3584F-8974-EZ Dexter Replacement Axle Beam - Easy Lube - 89" Hub Face - 74" Spring Center - 3,500 lbs






Customer Reviews

Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs - T3584F-EZ-8974

Average Customer Rating:  4.8 out of 5 stars   (99 Customer Reviews)

Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center. EZ-Lube spindles make it easy to lubricate bearings (sold separately).

- T3584F-EZ-8974
by:

Delivered in 3 days. I used my old hubs and fit like it’s supposed too. Awesome product. 896868



- T3584F-EZ-8974
by:

Great help with making sure that I purchased the correct axle for my application.very good service and fast shipping. Will use etrailer for all axle purchases in the future. 895079



- T3584F-EZ-8974
by:

Everything was perfect. Went together easily. Couldn't have been happier. Would recommend highly. 892224



- T3584F-EZ-8974
by:

Etrailer totally shocked me on their fast response and keeping me updated on the order status and shipping it out on the same day. I chose to Expedite my order for the 2 day shipping. I was thinking it would be here on Monday, but I got it on Saturday!!! I know who to order all my trailer parts from now... Etrailer! 871243



- T3584F-EZ-8974
by:

Specs. matched exact to the broken axle and was easy to install. I was surprised that the axle was pre-wired although it was not replacement of the brake axle on my trailer. Hub fit nicely and trailer is now ready for the next haul job. Delivery was as promised. 860916



- T3584F-EZ-8974
by:

Work well, only concern is the curve to the axle, doesn't straighten out even when trailer is fully loaded, which might cause more rapid tire wear. Only put 1500 miles on so far so too soon to tell. 831468



- T3584F-EZ-8974
by:

Made in America, quality material. 825735



- T3584F-EZ-8974
by:

great 817088



- T3584F-EZ-8974
by:

Axles with grease serts worked well with my reused/ rebuilt hubs. I was glad we rebuilt them ourselves. 794038



- T3584F-EZ-8974
by:

Best website I have ever came across with their photographs, descriptions and videos of their products. Good quality of parts and excellent service plus free shipping of my order. 779538



- T3584F-EZ-8974
by:

My utility trailer bearings locked up and welded to the spindle, along with the seal. Repair would have cost as much as a new axle. Ordered this axle Thursday night around 10pm, Arrived Saturday morning around 10am. They were running a special and regular shipping was free but I paid for 2nd day delivery which was discounted. Actual product was as described, wrapped well end to end with rubber protectors over spindles. Installation was a snap and took about 20 minutes start to finish with no help. Still waiting on hubs to be delivered but I am expecting the axle to do what it is supposed to. I will definitely use etrailer again, and should I need another axle, I wouldn't think twice about ordering this one again. Excellent business with an excellent product. 777619



- T3584F-EZ-8974
by:

Fit was perfect, pulls straight, tires are wearing evenly Thanks 763103



- T3584F-EZ-8974
by:

Great experience with etrailer.......life long customer.... customer service is over the top.....even for someone with no experience...... I ordered the wrong parts and team etrailer pointing Menon the right direction and kept me on track.... 745988



- T3584F-EZ-8974
by:

Fast shipping, great communication about shipping. Perfect fit for utility trailer, just what I needed. Thank you! 736306



- T3584F-EZ-8974
by:

Perfect fit. Good quality. 718968


Comments
Still perfect after using for a year.
John M - 10/20/2020

102374

- T3584F-EZ-8974
by:

Works well as an original equipment rep lacement. 714641



- T3584F-EZ-8974
by:

Perfect transaction arrived quickly and was as described. 699355



- T3584F-EZ-8974
by:

On time,perfect match, great price, installed and on the road again , you have my business 678634



- T3584F-EZ-8974
by:

Usually fast shipping and free shipping don't go together but this time it did. Two days after the order it was delivered. Haven't installed the axle and it looks like it just came off the assembly line. Thank you etrailer.com. 676925



- T3584F-EZ-8974
by:

fit perfectly adam was very professional 673494



- T3584F-EZ-8974
by:

Perfect fit, nice axle and fast delivery. I liked it so much I ordered another a day later to replace the front axle. My 30 yr old tandem trailer's axle broke at the wheel, so I went to a local store which doesn't stock them anymore. Could of ordered a so so axle for $94 + $28 shipping and wait 2 weeks but needed it fast. I went to a major trailer sales & service shop and told "maybe we could get one for $250" with no call back. I decided to check out etrailer and was surprised to see Dexter axles that fit my trailer for $140 with FREE shipping in 3-4 days! Ordered Sat. night, got it Wednesday afternoon, and installed it (with brakes) in an hour. Only problem I had was determining if spindles would fit my hubs. They stated "1/16th spindle" and must be industry talk but french to me. So I had to look up bearing #'s they listed to check bearing sizes to make sure they fit my hubs. A little more time but not a deal breaker. The best part was the huge difference in ride with just one new axle. Always had bouncing loaded or not, but now with just one axle the ride is smoother no load and with my 4000 lb tractor on it. Can't wait to get the 2nd axle on that arrived today. First two pics show the difference between the old straight axle and the new dexter axle. The third is a pic of my 2nd axle, oh well. Etrailer is my new go to place for trailer parts. I have 7 trailers. 661643



- T3584F-EZ-8974
by:

Exactly as ordered and axles run strait. a year later and no problems 660509



- T3584F-EZ-8974
by:

Great service as always out of etrailer. I ordered 2 new axles for my car carrier, great specs on your webpage made for a perfect match. Items arrived in 3 days, heavily wrapped and will add that the end of the axles which could rust if not installed soon were covered in grease, a nice touch to insure no damage. Thanks as always for having a great source for all things trailers!... 654963


Comments
one year later no issues at all
Michael - 06/08/2020

79224

- T3584F-EZ-8974
by:

Again with the great service and products,can’t recommend these folks enough! 634325



- T3584F-EZ-8974
by:

Personal service was great. Received a call regarding an address issue; person from etrailer wanted to make sure address was correct prior to shipping. This ensured order received without delay. Axels are a perfect fit; on-line videos for installation are very helpful. All your videos are well done; informative and helpful. Prices were better than any local suppliers in the area. I still trade with local businesses, but for large purchases I go to etrailer. The seal puller is a must have tool, works great!! 609618


27
103
Show More Reviews

Ask the Experts about this Dexter Axle Trailer Axles

  • Recommended Replacement 3,500 lb Axle for Carson Trailer with 88" Hub-Face and 74" Spring-Center
    We do have a replacement 3,500 lb axle for your Carlson trailer as well as hubs that fit your description. The axles that we carry have an 89" hub-face and 74" spring-center measurements so since the hub-face dimensions are only 1" off of what you measured these will work well for your application. I'm pretty sure that your axle has the 89" hub-face measurement as that is extremely common (and measuring the hub-face is a little difficult) but even if our axle hub-face is 1" wider there...
    view full answer...
  • Replacement Trailer Axle With 89 Inch Hub Flange To Hub Flange Measurement
    In order to replace your trailer axle you can use the Dexter Trailer Axle Beam with EZ-Lube Spindles part # T3584F-EZ-8974 for a 3,500 lb capacity, part # 8327820 for a 5,200 lb weight capacity, or part # 8327830 for a 6,000 lb weight capacity. These axles all have the correct hub face measurement but you will need to have the spring seats moved to match that of those on your trailer. Based on the measurements that you provided of your stud centers, you have a 5 on 5-1/2" bolt pattern....
    view full answer...
  • Replacement Options for Dexter Axle P-15 3,500 Lb
    I do have some replacement options for a Dexter 3,500 lb axle but this will be dependent on the hub face and spring center dimensions. The Dexter Trailer Axle Beam with EZ-Lube Spindles part # T3584F-EZ-8974 has an 89" hub face and a 74" spring center. The Dexter Trailer Axle Beam with EZ-Lube Spindles part # 7359765 has an 95" hub face and a 80" spring center. These are the two pre-built options we have available so if either match you will be able to reuse your existing hubs/drums as...
    view full answer...
  • Replacing the Axle on a Gooseneck Horse Trailer
    An axle flip kit like part # K71-384-00 will raise the trailer the diameter of the axle plus the height of the leaf spring pack. I do have options for you but rotating the axle to where the bend faces the other direction is not one of them. The bend in the axle will actually straighten out once a load is placed on the trailer and if this was reversed, the axle would lose capacity. Now from this point forward you have two options both of which entail replacing the axle. Since your current...
    view full answer...
  • Where Do I Position My New Trailer Axle?
    When positioning a trailer axle or adding an additional axle, the key is to make sure that the axles are located in just the right position so that roughly 10 to 15 percent of the total trailer weight is placed on the tongue. Finding the correct axle location can take some trial and error, so it is best to mock up the locations for all the suspension components until you know everything is in the right spot. I have a diagram and a help article attached that will show you how to recalculate...
    view full answer...
  • Dexter Trailer Axle Measurements on 89 Inch Axle
    The Dexter Trailer Axle # T3584F-EZ-8974 measures 89 inches from hub face to hub face. The flange-to-flange measurement is 82-5/8 inches. As long as the Dexter axle has the same capacity as the Lippert axle and the same hub face and spring center measurements, it will not be a problem to have them both on the same trailer. Lippert and Dexter axles are very similar and even use the same bearing numbers. I have attached a diagram showing where to measure for the hub face and spring...
    view full answer...
  • Finding a Replacement 3,500 Lb Axle
    Based on your bearing numbers and grease seal, you have a 3,500 lb axle. We have replacements that will work so long as your current axle has has a hub face to hub face measurement of 89" (represented by the "A" in the accompanying photo) and your spring center to spring center length is 74" (represented by the "B"). I recommend going with Dexter Axle with E-Z Lube Spindles # T3584F-EZ-8974, which has built-in grease zerks for very simple lubrication. I have added links to video reviews...
    view full answer...
  • Is Special Axle Needed for Mounting Under Leaf Springs?
    The Dexter Trailer Axle Beam # T3584F-EZ-8974 you referenced is an underslung design and you would need an overslung axle, though there is still a way for you to use an underslung axle. I assume you used an over/under conversion kit such as # K71-384-00 to move your leaf springs to the top of your axle. If so, you could still use those U-bolts and Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter # TRSS238 to place this axle on top of your leaf spring. Or, as...
    view full answer...
  • What Spindles are on the Dexter Trailer Axle Beam with EZ-Lube Spindles # T3584F-EZ-8974
    Yes, the spindles that come on the Dexter Trailer Axle Beam with EZ-Lube Spindles # T3584F-EZ-8974 are the number 84 spindles. For a brake drum confirmed to fit this spindle you could use the # 84546UC3. For an idler hub you could use the # 84545BX. Both these have 5 on 4-1/2 inch bolt patterns for the wheel lugs and I attached review videos for both.
    view full answer...
  • Spring-Center-To-Spring-Center Length Of Dexter Trailer Axle Beam T3584F-EZ-8974
    The distance from spring-center-to-spring-center of the Dexter Trailer Axle Beam, part # T3584F-EZ-8974 is 74-inches. This axle is designed with a weight capacity of 3,500-lbs and the hub-face-to-hub-face measuresment is 89-inches. I have attached a drawing that shows these dimensions you can check out.
    view full answer...
  • Is 23 inches from Spring Seat to Hub Face Too Long
    At 8 or 9 inches you're good but not at 23 inches per side. If this is a build you are doing then the frame width will have to be greater. Otherwise you will run into suspension, tire wear, and running gear problems. I checked with Dexter Axle but could not find a minimum or maximum. Another option is to use a Timbren Axle-Less system, see link, so that the frame spacing would not matter. Also they have built-in suspension so you would not have to worry about maintaining leaf springs...
    view full answer...
  • How To Find Right Location To Install Center Equalizer Hangers On 18 Ft Tandem Trailer
    There are a couple ways to determine where to place the center equalizer hanger on your trailer. The best way to find the right location is to find a trailer with the setup already installed and measure the locations of the hangers. The second way is to use the formula shown on the attached picture. You can adjust the location of the center hangers based on the tongue weight as the formula shows. Since there are so many different possibilities with the type trailers and what they...
    view full answer...
  • Can the Spring Perches of Trailer Axles Get Moved
    Moving the spring perches on the trailer axle part # T3584F-EZ-8974 that you referenced wouldn't affect the weight capacity of the axle. Especially since you aren't moving them that far. I attached an install video for this axle for you to check out as well.
    view full answer...
  • Replacement Axle for a 1994 Jayco Eagle 8 with Dexter Axle
    It sounds like you will need a 2,000 pound axle. We do not carry the torsion straight axles though. We do have axle-less systems that work the same as torsion axles. I have included a link to them for you to view. The great thing about the axle-less systems, besides the better ground clearance, is that you don't have to have a specific axle length and in your case you would not have to add suspension components like you likely would if you went to a straight axle.
    view full answer...
  • 3,500 lbs. Axle with Hydraulic Drum Brakes Kit
    I have a solution for you but unfortunately we do not carry any axles that come with hydraulic brakes. What you will need to do is buy the parts separately, but I have all the parts you will need. First, for an axle, you will need the Dexter Axle Beam with EZ Lube Spindles # T3584F-EZ-8974. This axle is 89" long with a weight capacity of 3,500 lbs. which is the same as the # 35545E-ST-EZ-89 Dexter Axle you were looking at. For your Hydraulic Trailer Brake Assemblies you will want...
    view full answer...
  • How Can You Determine Axle Load Capacity on a Dexter Axle
    I reached out to my contact at Dexter and based on your serial number, they can't really narrow it down. It is an older axle that was produced in a plant that has since been closed. All they can tell me is that it is between 2K and 8K capacity because it came from that plant. Do you have a GVWR sticker on your trailer? Does it have brakes if so are they 10 inch or 12? We can get really close with this info if not confirm load rating. Another way to narrow it down is with spindle...
    view full answer...
  • Axle Recommendation with 74 inch Spring Center Dimensions
    Of the axles that we carry the part # T3584F-EZ-8974 that you referenced would be the closest one we carry to what you would need. The spring center measurement is the same at 74 inches. The issues is that this axle measures 89 inches from hub face to hub face so it would be 2 inches shorter than what you currently have. If the wheels and tires could be an inch closer to the frame on your trailer on either side without causing interference this axle would work well for you. Otherwise...
    view full answer...
  • Is Trailer Axle Bow Normal When Loaded
    You are correct that trailer axles feature an upward bow in them to compensate for the trailer's loaded weight. As more weight is put onto the trailer this bow will indeed flatten out (so the axle profile will look different when the trailer is completely empty compared to when it's fully loaded for a trip). If the axle is flat this doesn't necessarily mean that it's overloaded. It's more likely that it's just supporting around the maximum weight that it's designed to handle. It's always...
    view full answer...
  • Full Axle vs Spindle Replacement for 2012 Forest River Stealth Toy Hauler
    Thank you for the photo of your Stealth toy hauler trailer's damaged spindle. Based on the deep scoring on the spindle it certainly does appear that this hub suffered a catastrophic bearing failure that in turn took out your spindle. You can replace your 3500-lb Lippert axle with another brand or you can have new spindles welded on. If you prefer a new 3500-lb axle you can refer to the linked page that displays our available options such as # T3584F-EZ-8974. This is a Dexter axle...
    view full answer...
  • Dexter 3500-lb Beam Axle with 2-3/8-Inch Diameter and 74-Inch Spring Centers
    We carry beam trailer axles up to the 3500-lb rating and with the dimensions most commonly used on recreational trailers. Dexter idler axle kit # 35545I-EZ-89, for example, is a 3500-lb-rated EZ-Lube axle with 74-inch spring centers and an 89-inch hub face dimension. Axle diameter is 2-3/8-inches and spindle size is indeed 1-1/16-inch. The same axle with spindles but without hubs is part # T3584F-EZ-8974. The linked article on trailer suspensions includes a table of common axle dimensions...
    view full answer...
  • How Much More Clearance Under Trailer Using Torsion Axle With Negative Angle
    In order for you to realize more clearance under your trailer, using torsion axles with down degree angles will give you more clearance. On a system that has a 10 degree up axle, the center line of the spindle to the bottom of the trailer frame is approximately .96 inches. That is based on a newer system. If you have an older system on your trailer that measurement may be much less. For a 10 degree down you would have a difference of 2.08 inches. For 22.5 degree down, the difference...
    view full answer...
  • Recommended 3500 lb Axle with Idler Hub Assembly And EZ-Lube Spindles
    I think you will be better off simply replacing the axle. I recommend a replacement like the Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs, # 35545I-EZ-89, since you have no brakes. This will give you the new axle, the new bearings, races, seals, and hubs on EZ-Lube spindles. Will also give you the clear knowledge if there is another issue because the axle will be brand new. The length of your trailer axle you are replacing will dictate...
    view full answer...
  • Axle Recommendation for a Trailer for Best Ground Clearance
    If ground clearance is your primary concern I have a great solution for you. Instead of a standard axle like the part # T3584F-EZ-8974 that you referenced you would want a Timbren Axle-Less system like the part # ASR35HDS02. This setup has the same capacity as the axle you referenced, does not have an axle that runs under the trailer, has a 4 inch lift built into it, and has wider clearances for larger off-road tires. For a hub for this setup you would want the part # 42655UC1.
    view full answer...
  • How Does EZ-Lube Spindle Grease Hub Components
    The EZ-Lube spindles have a hole in the spindle so that it fills the hub components from the back of the inner bearing. This forces air out of the hub area and will disburse the grease toward the outside of the hub on the grease fitting side. I have attached a photo of an EZ-Lube spindle that shows the hole where the grease exits.
    view full answer...
  • Can Spring Perches on 3,500 Pound Axle be Moved
    The spring seats (or perches) on a 3,500 pound axle can each be safely moved as far as 9 inches away from the hub face without affecting its integrity. Since the hub you are looking at features a 73 inch hub face measurement and a 58 inch spring center measurement, the perches are already each spaced 7-1/2 inches in from the hub face. This means you would only be able to move them each 1-1/2 inches closer, giving you a new spring seat measurement of 55 inches. Moving the spring perches...
    view full answer...
  • Measuring to Find a Replacement Axle for a 1994 Jayco 1207 Tent Trailer
    To determine if we have an axle that will fit your trailer I will need a little more information. Take a look at the pictures I have included that show where to measure on your existing axle. I would also need to know the gross trailer weight capacity rating of the trailer. I found a figure stating that the trailer weighs 1,755 pounds but does not indicate if that is the dry weight or the gross weight. I believe it is the dry weight. If none of the axles match the exact measurements...
    view full answer...

Do you have a question about this Trailer Axle?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer axles for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Sarah H
Written by:
Lindsey S
Updated by:
DeAnne T
Updated by:
Laura H
Updated by:
Mike S
Installed by:
Jeff D
Test Fit:
Nicholas E
Video by:
Alan C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.