1. Trailer Axles
  2. Dexter Axle
  3. 7000 lbs
  4. 94 Inch Long
  5. Leaf Spring Suspension
  6. No Hubs
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 94" Long - 7,000 lbs

Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 94" Long - 7,000 lbs

Item # 8327872
lowest price pledge
Our Price: $442.12
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 69 lbs
In Stock
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 94" Long - 7,000 lbs 7000 lbs 8327872
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Round trailer axle beam measures 94" from hub face to hub face (when hubs - sold separately - are mounted) and 78-1/4" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately). Lowest Prices for the best trailer axles from Dexter Axle. Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 94" Long - 7,000 lbs part number 8327872 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (2)
  • Q & A (2)
  • Videos (1)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Axles - 8327872

  • 7000 lbs
  • 94 Inch Long
  • Leaf Spring Suspension
  • No Hubs
  • 78-1/4 Inch
  • Spindles Only
  • Dexter Axle
  • EZ-Lube Spindles

Round trailer axle beam measures 94" from hub face to hub face (when hubs - sold separately - are mounted) and 78-1/4" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).


  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
  • 4" Drop E-Z Lube spindles
    • Lowered axle beam provides lower deck height for easier loading and unloading
    • Built-in grease zerks for simple lubrication
  • Spring seats, brake flanges, and spindles are welded on
  • Made in the USA


  • Weight capacity: 7,000 lbs
  • Hub-face-to-hub-face length: 94"
  • Spring-center-to-spring-center length: 78-1/4"
  • Spindle drop: 4"
  • Tubing outer diameter: 3"
  • Bearings (sold separately):
    • Inner bearing: 25580
    • Outer bearing: 14125A
  • Brake flange configuration: 5 bolt
  • Limited 5-year warranty

Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).

The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.

If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.

E-Z Lube Spindles Make Lubrication Simple

The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.

Dexter Axles

Dexter axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. This axle is also built with drop spindles, which will lower the ride height of your trailer to allow for easier loading and unloading.

Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.

8327872 Dexter Replacement Axle Beam - Easy Lube - 94" Hub Face - 78-1/4" Spring Center - 4" Drop - 7,000 lbs

Video of Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 94" Long - 7,000 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Review of Dexter Axle Trailer Axles - Leaf Spring Suspension - 8327872

Ellen: Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a look at the Dexter Trailer Axle Beam with 4" Drop and E-Z Lube Spindles.Now, this is going to help us to either replace our bent, broken, or damaged axle on our trailer or help us to fabricate a new trailer for whatever application we might want to use it for. Of course, our axle beam is kind of the basis or the foundation for our suspension on our trailer. It's going to connect everything together and help us to get down the road safely.The main specs with this, it is going to be a 7,000 pound axle, so that's the total weight capacity that this can handle. And it's going to have a length of 94" going from hub face to hub face, or if you want to go from spring center to spring center, that's going to be 78-1/4".

That's going to be the spring center down here, which is an underslung design, meaning it's welded to the bottom of the axle. That's the place where we attach our leaf springs for our suspension, and having that underslung design means that we bring our deck height just a little bit lower, which helps us to load and unload things from our trailer. If you think of your trailer and then the ramp on the back, if it's really high, that ramp is going at a steeper angle. If we drop that down, our ramp comes down and it makes these things easier to roll up on it, so that's the advantage there.You might notice that there's a slight bend to the axle. That's going to accommodate for the weight that we put on top of our trailer to hold everything together and that gives us a zero camber, so whenever our wheels are on the road they're going to be straight and perfectly perpendicular to the road so they're not going to be tilted in or out.

They're going to give us a good straight line pull, a good straight line acceleration, and that also helps to keep our tire treads wearing the same all across the width of that tire.Now as far as the ends of our axle, we'll have a five bolt pattern for our brakes to mount onto. You might notice that there are these caps here. This is just how they come in transit, so that helps to keep everything kind of lubed up and prevent it from rusting over time. You don't need these for the install, it's just a packing material. But here you'll see our E-Z Lube Spindles, so we'll have that grease zerk on the end.

You can do the easing maintenance of putting a grease gun on there, pumping it up full of grease to keep all the bearings and everything inside lubed up and working properly.Of course, whenever you first install this and you put those bearings into your hubs and drums, you want to make sure that you pack those full of grease, and it's best to do it by hand to make sure that there are no voids in there, that we get grease completely into those bearings. But once they're packed and everything's rolling, just to do that periodical maintenance. That grease zerk is going to make things a lot easier. It also comes with a little keeper, the nut, and the D washer to put on the end of the axillary to keep everything in place.Put that back on there and you'll also notice we'll have that 4" drop. Again, that's going to kind of give us the same benefit that I mentioned with the underslung design.

By having that drop, we again lower down that deck plate to have an easier time loading things on and off of our trailer. It's going to have a drop of 4", so that's going from the center of the axle down to that spring seat there.The spindles, the spring seats, and the brake flanges are all welded into place. It's made of a high strength steel construction with that black powder-coat finish. It's made in the USA. As far as our other specs for this, again, weight capacity is 7,000 pounds. Our length from hub face to hub face is 94" or from spring center to spring center, 78-1/4". Spindle drop is 4". The outer tubing diameter is going to be 3". The bearings that you'll need for this, which are sold separately, the inner bearing, you'll need number 25580. For the outer bearing, you'll need 14125A. You can find both of those right here at etrailer.com, along with the hubs, brakes, drums, everything else that you need to get this installed.Again, that brake flange configuration is going to be a five bolt and it does come with a five-year limited warranty and it is made in the USA.But that's going to do it for our look at the Dexter Trailer Axle Beam with 4" Drop and E-Z Lube Spindles.

Customer Reviews

Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 94" Long - 7,000 lbs - 8327872

Average Customer Rating:  5.0 out of 5 stars   (2 Customer Reviews)

Round trailer axle beam measures 94" from hub face to hub face (when hubs - sold separately - are mounted) and 78-1/4" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).

- 8327872

Every where I check for the axle they would tell me that it will take 2 to 3 weeks to get it with them I got it the 2nd day !!!! Thank you etrailer! 708078

- 8327872

The Axle fit well, deliver was fast and I'm back on the road 694806


Ask the Experts about this Dexter Axle Trailer Axles

  • Does Drop Axle Raise or Lower the Trailer
    A drop axle will lower the trailer trailer deck; each of our drop axles are a 4 inch drop, so that is how much it will lower the deck. In order to choose the correct replacement axle for your trailer you will need to know the capacity you need as well as the dimensions of your current axle's hub face to hub face and spring center to spring center. Here are all the options we carry for a drop axle: - 3,500 lbs: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 89" Long # 8327812 -...
    view full answer...
  • Lowering Boat Trailer Converted to Flat Bed Trailer
    If your trailer already has an over-under kit like # K71-385-00 to put the leaf springs above the axle, then you simply need to remove the kit to put the axle on top of the leaf springs using the factory mounted spring seat on the axle. This will lower the trailer by the diameter of the axle as well as the height of the leaf spring stack. If you need to further lower the trailer, then shorter spring hangers are needed. I recommend the CE Smith Front/Rear Hanger Bracket for Double-Eye...
    view full answer...

Do you have a question about this Trailer Axle?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer axles for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Installed by:
Kathleen M
Written by:
Alexander C
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 800-298-8924