View Cart
Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 6,000 lbs

Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 6,000 lbs

Item # 8327826

lowest price pledge

Our Price: $187.14

Trailer Axles

This item qualifies for Free Shipping

Shipping Weight: 55 lbs

Quantity: 
In Stock, Ships Today
Dexter Axle Trailer Axles - 8327826
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images


  • 6000 lbs
  • 86-1/2 Inch Long
  • Leaf Spring Suspension
  • Dexter Axle
  • No Hubs
  • Spindles Only
  • 71-1/2 Inch
  • EZ-Lube Spindles
Trailer axle beam measures 86-1/2" from hub face to hub face (when hubs - sold separately - are mounted) and 71-1/2" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately). Lowest Prices for the best trailer axles from Dexter Axle. Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 6,000 lbs part number 8327826 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Q & A (4)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Axles - 8327826

Trailer axle beam measures 86-1/2" from hub face to hub face (when hubs - sold separately - are mounted) and 71-1/2" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).


Features:

  • Axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
    • Low ride height makes it easier to load and unload your trailer
  • Straight, E-Z Lube spindles - no drop
    • Built-in grease zerks for simple lubrication
  • Spring seats, brake flanges, and spindles are welded on
  • Made in the USA


Specs:

  • Weight capacity: 6,000 lbs
  • Hub-face-to-hub-face length: 86-1/2"
  • Spring-center-to-spring-center length: 71-1/2"
  • Tubing outer diameter: 3"
  • Bearings (sold separately):
    • Inner bearing: 25580
    • Outer bearing: 15123
  • Brake flange configuration: 5 bolt
  • Limited 5-year warranty


Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


E-Z Lube Spindles Make Lubrication Simple

The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.


Dexter Axles

Dexter axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.



8327826 Dexter Replacement Axle Beam - Easy Lube - 86.5" Hub Face - 71.5" Spring Center - 6,000 lbs







0
0

Ask the Experts about this Dexter Axle Trailer Axles
Do you have a question about this Trailer Axle?


  • Can a Dexter 5,200 Lb Axle Be Replaced With a Dexter 6,000 Lb Axle
  • It sounds like you are asking if you can use the Dexter Trailer Axle Beam part # 8327826 to replace the axle beam included with Dexter Trailer Axle with Electric Brakes part # 8327816-EB and reuse the braking assemblies and hubs/drums. If that is the case then yes you can as the diameter of the spindle where the bearings and grease seal ride are the same. Therefore, even though they may use a different outer bearing, the diameter for the inside of the bearing where it sits on the spindle...
    view full answer...

  • Replacing the Axle on a Gooseneck Horse Trailer
  • An axle flip kit like part # K71-384-00 will raise the trailer the diameter of the axle plus the height of the leaf spring pack. I do have options for you but rotating the axle to where the bend faces the other direction is not one of them. The bend in the axle will actually straighten out once a load is placed on the trailer and if this was reversed, the axle would lose capacity. Now from this point forward you have two options both of which entail replacing the axle. Since your current...
    view full answer...

  • 7,000 Lb Trailer Axle with 86 Inch Long Hub Faces
  • I do have options for you but none of or trailer axles are 86" long hub face to hub face, 62" long spring center to spring center, and have a 7,000 lb capacity. Instead, we have the Dexter Trailer Axle Beam part # 8327826 which is 86-1/2" long hub face to hub face, 71-1/2" long spring center to spring center, and has a 6,000 lb capacity or the Timbren Axle-Less Trailer Suspension System part # TASR7KS01 which has a 7,000 lb capacity. Please note that if you wanted to use the 6,000 lb...
    view full answer...

  • Trailer Axle Rated for 6,000 or 7,000 Pounds
  • We have some axles but trailer axles can be made to pretty much any length. The ones we have rated for 6,000 or 7,000 pounds do not have the measurements you are looking for. But we do have some more universal options such as # TASR7KS01 rated for 7,000 pounds. This will also replace the suspension on the trailer so no more worrying about corrosion or various worn suspension parts. I have linked a video review for you. If you need to have a straight axle you would need to special order...
    view full answer...


Do you have a question about this Trailer Axle?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer axles for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Expert Research:
Michael H
Written by:
Alexander C
Photos by:
Stacy F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924