1. Trailer Axles
  2. Dexter Axle
  3. 5200 lbs
  4. 89 Inch Long
  5. Leaf Spring Suspension
  6. 74 Inch
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 89" - 5,200 lbs

Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 89" - 5,200 lbs

lowest price pledge
Our Price: $632.83
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 149 lbs
8327820-EB - 74 Inch Dexter Axle Leaf Spring Suspension
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication. Lowest Prices for the best trailer axles from Dexter Axle. Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 89" - 5,200 lbs part number 8327820-EB can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (3)
  • Q & A (14)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Axles

  • 5200 lbs
  • 89 Inch Long
  • Leaf Spring Suspension
  • 74 Inch
  • Electric Brakes
  • 6 on 5-1/2
  • Dexter Axle
  • EZ-Lube Spindles

Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.


  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs
    • Low ride height makes it easier to load and unload your trailer
  • Straight, E-Z Lube spindles - no drop
    • Built-in grease zerks for simple lubrication
  • Spring seats and spindles are welded on
  • Electric brakes are easy to install - no actuator or hydraulic lines necessary
    • Adjuster plugs, mounting bolts, and hardware included
  • Cast iron hubs and drums are sturdy and durable
    • Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included
  • Made in the USA


  • Weight capacity: 5,200 lbs
  • Hub-face-to-hub-face length: 89"
  • Spring-center-to-spring-center length: 74"
  • Drum dimensions: 12" diameter x 2" wide
    • Bolt pattern: 6 on 5-1/2"
  • Brake flange configuration: 5 bolt
  • Axle tubing outer diameter: 3"
  • Grease cap outer diameter: 2.44"
  • Wheel stud diameter: 1/2"
  • Wheel size: 14-1/2" - 16"
  • Limited 5-year warranty

Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: 25580 (1.75" inner diameter)
    • Outer bearing: LM67048 (1.25" inner diameter)
  • Races (included)
    • Inner race: 25520
    • Outer race: LM67010
  • Grease seal (included): GS-2125DL
    • Inner diameter: 2.125"
    • Outer diameter: 3.376"

Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle.

The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.

If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.

E-Z Lube Spindles Make Lubrication Simple

The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.

Dexter Axles

Dexter axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.

Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

8327820 Dexter Trailer Axle Beam - Easy Lube - 89" Hub Face - 74" Spring Center - 5,200 lbs

8-201-5UC3-EZ (K08-201-94) Dexter 12" Hub and Drum Assembly for 5.2K and 6K Axles with Hardware - 6 on 5-1/2 - EZ Lube

23-106 (K23-106-00) Dexter 12" Electric Brake Assembly, RH - 6,000 lbs

23-105 (K23-105-00) Dexter 12" Electric Brake Assembly, LH - 6,000 lbs

11402 LubriMatic Marine Trailer Wheel Bearing Grease - 14 oz. Cartridge

7-5 (191000) Redline Brake Mounting Bolt

Item # 8327820-EB

Customer Reviews

Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 89" - 5,200 lbs - 8327820-EB

Average Customer Rating:  5.0 out of 5 stars   (3 Customer Reviews)

Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.

- 8327820-EB

Replaced a 3,000 lbs axle with this 5,200 lbs axle with electric brakes. Was easy, quality was great. Brakes were easy to wire up and all is working. I would recommend this axle assembly. 855165

- 8327820-EB

Excellent product for replacement axles on your trailer. Axles came well packaged and installed easily. I would recommend ordering the axle ubolt kits that fit your application for ease of installation instead of using the existing hardware. 739563

- 8327820-EB

Good quality product Pact very well on delivery some assembly required but very easy very fast shipping 704526


Ask the Experts about this Dexter Axle Trailer Axles

  • Over-Under Conversion Kit for 3" Dexter Axle
    You can absolutely use the Dexter Trailer Axle w/ Electric Brakes # 8327820-EB and put them below your leaf springs. What you need to do is use the Trailer Springs Over-Under Conversion Kit # K71-385-00, so long as you have double-eye leaf springs; which will then be on top of the axle like you wanted.
    view full answer...
  • Does the 5,200 Lb Dexter Trailer Axle 8327820-EB Come with Leaf Springs
    The Dexter Trailer Axle part # 8327820-EB does not come with leaf springs but we do offer these separately. If you can provide me with the length of your existing leaf springs I can then offer a recommendation. Otherwise, I have attached a list of options for you. The spring seats are installed under the axle tube but you can move these to the top with the Dexter Trailer Springs Over-Under Conversion Kit part # K71-385-00 if needed. The distance from the hub face to the center of the...
    view full answer...
  • Why Aren't Trailer Axles Made Totally Flat without a Bow in Them
    They put a slight bow into trailer axles so that when they have weight on them the camber angle for the wheels/tires isn't bad. Basically the axle slightly flattens out with weight so that you get the correct camper angle. Your choice would be to order an axle in the over/under configuration you need or installing an over/under kit if needed. If the brake shoes are upside down they'll still work fine but if you have a left side assembly on the right side of a trailer or vice versa you'd...
    view full answer...
  • Availability of 5,200 lb Trailer Axle with 74 inches Between Spring Seats
    To pick out replacement axles you need a few pieces of info. You need the capacity like you mentioned, you need the hub face to hub face dimension and you need the spring seat to spring seat dimension as well. With that info you can determine what you'd need. For example, if the 74 inch dimension you listed was from the spring seat to seat dimension and you needed 89 inches from hub face to hub face you'd want the # 8327820-EB which comes with hub/drums and brake assemblies.
    view full answer...
  • Availability of 5,200 Pound Axle with 8 on 6-1/2 Inch Hubs and Electric Brakes
    We do have a nice selection of 5,200 pound axles available that include electric brakes, however the hubs that are included all have a 6 on 5-1/2 inch bolt pattern. I have attached a link that will take you directly to this selection that you can look through if needed. We also have a couple 5,200 pound Dexter axles that do not include hubs so you can add those with a 8 on 6-1/2 inch bolt pattern like what you are needing. For example, the Dexter Trailer Axle Beam with E-Z Lube Spindles...
    view full answer...
  • Replacement 6 on 5-1/2 Inch Trailer Hub with 15123 and 09067 Bearings
    I took a look through our available selection of hubs/drum and none of them have the bearing numbers you provided. Therefore, the only option we can offer you is a replacement axle. If this is something that you would be interested in then the first thing we need to do is measure the axle you have now. The first measurement you will need to take is from the end of each hub face and then from the center of each spring seat. Once the length measurements are acquired we can then measure the...
    view full answer...
  • Parts Needed To Replace 3,500 Lb with 5,200 Lb Trailer Axles
    Yes, you can replace the 3,500 lb Dexter Axles with 5,200 lb Dexter Axles by simply swapping out the old for the new. That said, you will need new u-bolts as the axle will be larger in diameter (2-3/8" vs. 3"). The bolt pattern will also change from a 5 on 4-1/2" to a 6 on 5-1/2" so you will need new wheels/tires as well. Therefore, you will need new axle tubes, u-bolts, and wheels/tires in order to make the swap but these are all bolt-on parts. For the axles you just need to measure...
    view full answer...
  • AL/KO 5200 lb Axle Replacement
    We offer some Dexter axles that might be a good replacement. You'll need to measure the hub face to hub face and spring seat to spring seat dimension of your current axle to see if what we offer is compatible. I've provided a diagram showing how to take that measurement. All the axles I'm showing you use spindles compatible with 25580 inner/LM67048 outer wheel bearings. For a 95 inch hub face and 80 inch spring center, use # 6340624-EB which includes hub/drums with 6 lug on a 5-1/2...
    view full answer...
  • Recommended Replacement 5,200 lb Axle with 89 Inch Length
    Traditionally it is not a 5,000 lb axle but rather a 5,200 lb axle. There are two 89 inch hub face to hub face options we carry, they both have 74 inch spring seat centers, but one comes with the electric brakes and hubs and the other is just the axle. If you will use electric brakes, I recommend going with the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 89" - 5,200 lb # 8327820-EB. If you will use hydraulic brakes then I recommend instead using the...
    view full answer...
  • How To Upgrade to a 5,200 Lb Axles On a Trailer
    In order to find the correct replacement axle you have a few options. The first option would be to simply measure the axle you have now and record both the spring center and hub face measurements. The other option would be to look at the axle tag and read the hub face (HF) and spring center (SC) measurements off of this as it should be listed for you here using these aberrations. The final option would be to record the serial number and get in contact with the axle manufacturer. I would...
    view full answer...
  • Upgrading Underrated Axles on 31-4BH Coleman Lantern Travel Trailer
    If I'm reading you correctly, your travel trailer has a GVWR of 10K, but has two 3500 axles? If that's the case, your axles are horrifically overloaded and should be upgraded. Installing 12 inch brake assemblies (which likely wouldn't work because the available 12 inch drums would use a different bearing set than a 3500 lb axle) would provide better braking, but wouldn't fix the fact that the axles are underrated. Your best course of action would be to replace your current axles with...
    view full answer...
  • Can Spring Seats on Dexter 3500 lb Axle 35545E-ST-EZ-89 Be Relocated
    The Dexter # 35545E-ST-EZ-89 axle would work very well for you, as it's definitely the closest to what you currently have. Once the existing spring seats were removed, they'd likely be pretty messed up. You'd be better off simply purchasing new ones, part # TRSS238 and welding them into place where needed. You could go larger in weight capacity, up to a 5200 lb axle like # 8327820-EB, but if your current axles are 3.5K apiece, increasing the capacity of the axles won't increase the trailer's...
    view full answer...
  • Availability of 89 Inch Axle with 6 Lug Hubs and Electric Brakes
    We currently have two Dexter 89 inch axles available that feature hubs with a 6 on 5-1/2 inch bolt pattern and electric brake assemblies. The Dexter # 8327820-EB features a 5,200 pound capacity and the Dexter # 8327830-EB has a 6,000 pound capacity. The 89 inch measurement on the axles refers to its hub face dimension, which is the length from the base of one wheel stud to the base of the other wheel stud (see attached image). Both axles are equipped with E-Z Lube spindles and hubs...
    view full answer...
  • Troubleshooting Replacement Hub/Drum Fit on 1962 Airstream
    In order for replacement hubs to fit on your existing spindles the new hubs need to use the same inner and outer bearing parts. The hub/drum assembly you selected # AKHD-655-6-EZ-K uses inner bearing # 25580 and outer bearing # 15123 and it is intended for a 5200-lb or 6000-lb axle with number 42 spindles. The bearing inner diameters are 1.75-inches for bearing # 25580 and 1.25-inches for bearing # 15123. The hub's included grease seal has an inner diameter of 2.25-inches. If these bearings...
    view full answer...

Do you have a question about this Trailer Axle?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer axles for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Written by:
Alexander C
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.