bing tracking image
  1. Trailer Axles
  2. Dexter
  3. 3500 lbs
  4. 89 Inch Long
  5. 74 Inch
  6. 5 on 4-1/2
Dexter Trailer Axle w/ Electric Brakes - 4" Drop - E-Z Lube - 5 on 4-1/2 - 89" - 3.5K

Dexter Trailer Axle w/ Electric Brakes - 4" Drop - E-Z Lube - 5 on 4-1/2 - 89" - 3.5K

Item # 8327812-EB
Our Price: $544.78
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 106 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication. Lowest Prices for the best trailer axles from Dexter. Dexter Trailer Axle w/ Electric Brakes - 4" Drop - E-Z Lube - 5 on 4-1/2 - 89" - 3.5K part number 8327812-EB can be ordered online at etrailer.com or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (141)
  • Q & A (0)
  • Photos
  • Why etrailer?

Dexter Trailer Axles - 8327812-EB

  • 3500 lbs
  • 89 Inch Long
  • 74 Inch
  • 5 on 4-1/2
  • Leaf Spring Suspension
  • Electric Brakes
  • Dexter
  • Drop - 4 Inch
  • Easy Lube Spindles

Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs
  • 4" Drop E-Z Lube spindles
    • Lowered axle beam provides lower deck height for easier loading and unloading
    • Built-in grease zerks for simple lubrication
  • Spring seats and spindles are welded on
  • Electric brakes are easy to install - no actuator or hydraulic lines necessary
    • Adjuster plugs, mounting bolts, and hardware included
  • Cast iron hubs and drums are sturdy and durable
    • Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included
  • Made in the USA


Specs:

  • Weight capacity: 3,500 lbs
  • Hub-face-to-hub-face length: 89"
  • Spring-center-to-spring-center length: 74"
  • Drum dimensions: 10" diameter x 2-1/4" wide
    • Bolt pattern: 5 on 4-1/2"
  • Spindle drop: 4"
  • Axle tubing outer diameter: 2-3/8"
  • Brake flange configuration: 4 bolt
  • Grease cap outer diameter: 1.986"
  • Wheel stud diameter: 1/2"
  • Wheel size: 13" - 15"
  • Limited 5-year warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle.


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


E-Z Lube Spindles Make Lubrication Simple

The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.


Dexters

Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. This axle is also built with drop spindles, which will lower the ride height of your trailer to allow for easier loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


8327812 Dexter Trailer Axle Beam - Easy Lube - 89" Hub Face - 74" Spring Center - 4" Drop - 3,500 lbs

23-26 (K23-026-00) Dexter 10" x 2 1/4" LH Electric Brake Assembly - Drivers Side - 3.5K Axles

23-27 (K23-027-00) Dexter 10" x 2 1/4" RH Electric Brake Assembly - Passengers Side - 3.5K Axles

84546UC3-EZ (K08-247-94) Dexter 10" Trailer Hub and Drum Assembly for 3.5K Axle with Hardware - 5 on 4-1/2 - E-Z Lube

457457 Loctite Viper Lube High Performace Synthetic Lubricant - 14 oz Cartridge






Customer Reviews

Dexter Trailer Axle w/ Electric Brakes - 4" Drop - E-Z Lube - 5 on 4-1/2 - 89" - 3.5K - 8327812-EB

Average Customer Rating:  4.7 out of 5 stars   (141 Customer Reviews)

Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.

by:

So far so good! Axle was not a direct fit even though it was supposed to be. We had to relocate a couple of the mounts for suspension. Other than the trailer rides great, better than ever.




by:

The part is made of good quality!! Only complaint is was not sent all hardware needed to install properly


Comments
I will have our customer service team reach out to you.
-- Etrailer Expert Jenny N - 12/22/2021


by:

I received my order and was pleasantly surprised by the quality and craftsmanship of your products, I should have known better it was made in America, not the C.... country The price was good also. American made Products from etrailer will continue to keep America Great. I will use your product with pride.


Comments
Not done yet parts are on trailer which is part of a bigger project
Donald - 01/11/2020


by:

Solid axle. Unfortunately I needed the leaf spring attachements on top, but it was a straightforward welding job.




by:

very strong axle, would purchase one in a heart beat, can't beet them...




by:




by:




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Note I have not received any compensation for this review. I do reviews because I use other people's reviews and want to return the favor.
I wanted the largest axle that fits the wheels for my rv trailer and that is the 6000# axle, replacing a 4400# axle. FYI, I can upgrade the brakes to 7000# with different magnets but not sure the tires have that much traction. Received the parts on time and in good shape, even though the ups guy dropped the axle on concrete. Wish I wasn’t home to see that. After I placed the order there was some communications with etrailer and they delivered as promised! I have placed orders since then and will keep ordering due to continued good service.
The axle came with studs pressed in but I knocked them out and used nuts/bolts to bolt on the brake plate assemblies.
I cut off the spring seats and welded on new ones in the needed location, as planned. I could have ordered the axle with the spring seats where I needed them but I was in a hurry and figured this way was faster. And etrailer had the best price and had good service on many prior purchases.
Installed the axle and adjusted the brakes. Note, I soldered the wiring connections and sealed.
Performed a break in procedure and took the trailer on a long trip. During the trip the brakes started getting grabby and I had to dial back the trailer brakes. Once home, I adjusted the brakes and it took quite a bit of adjustment. From now on I will be prepared to adjust the brakes during trips. I expect the brakes to work better on the next trip. Honestly, this is the first trailer I have owned with brakes and am not used to needing to adjusting brakes.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


I bought two of these axles to replace 2 off brand ones that needed brakes, hubs and bearings. These were only slightly more expensive, and got me to a name brand. The kit came with actually extra axle nuts, and you have to assemble the brakes and hubs yourself, which was no problem. I had two slight issues. The first was that one of the brake wires that travels through the axle had a tiny bit of damage, exposing the actual copper wire itself, however there was plenty of wire left to fix this. But it would definitely be a failure down the road if I didn't see it when installing. The second problem I had was more of a shipping issue. They include a tube of grease in the box that has both hubs and breaks in it, the plastic cap of the grease tube opened up, and coated everything and damaged the box to the point that it literally opened up on the poor UPS carrier at my door, dumping the contents on the ground, however shipping issues aren't the main focus of the review, and it only happened to one, not the other axle's box. Thankfully, everything I ordered is tough enough that it was not bothered. Overall, this was an excellent solution to my problem, and I called to order this to double check what I read on the site, service was great, order processed quickly! I will come back for future needs!




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


I replaced my RV's axles from 4400# to this product. I am very pleased with the product including the shipping and the installation.


Comments
Very pleased. I feel my RV rides better with less sway. For the record, I also upgraded my leaf springs to to 7-leaf 3500# capacity each
Nick - 11/11/2022


by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Replaced a 3,000 lbs axle with this 5,200 lbs axle with electric brakes.
Was easy, quality was great. Brakes were easy to wire up and all is working.
I would recommend this axle assembly.


Comments
Axel has been great! Server long road trips has proven the product.
DaveW - 08/05/2021


by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Great axle kit, very easy install was able to swap this in the day it arrived to my home. One thing to recommend is buy new U bolts you will be glad you did




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


I purchased this to replace a bent idler axle on an older Pequea utility trailer. I figured it made sense to upgrade to an axle with brakes while I was at it - and I was rewiring the trailer anyway so adding brake wires was no big deal as part of that project.

Installation was simple. I was a little worried about assembling the brakes and bearings just because I hadn't done it before, but I watched some videos and it was very easy. I've put around 1000 miles on it in the year I've had it and it's held up great so far.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


I ordered these August 1st and they just arrived 4 1/2 months later. I don't blame Etrailer for that. It's just the way things were with supply since then. Etrailer kept me updated as things changed. Since I live in Maine and will have to install them outside I won't be doing it until spring. I have checked everything over though and the quality looks excellent. I have never had any problem with anything from Etrailer. This package deal was at a great price and includes everything except the U bolt mounting kit which I bought separately.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


I have been buying trailer parts from etrailer for years and have they never let me down! Great customer service!




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Axle seem good. The directions for assembly are apparently a copy of a copy of a copy..... ect,making them pretty difficult to read. Difficult enough that I missed the part about how deep to tap in your inside seal. Now we get to do it again.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Five stars because of Hally. She is the only person that knew her job that I spoke to. Axle and brakes are going fine on my trailer.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Installed a yr ago. Perfect product.
One
thing for me though....
I had to buy different fenders because I bought better tires and rims for this new axle which turned out to be slightly wider.
So the original fender would have cut into the tires.
I got everything from etrailer. Axle with brakes fully assembled, controller, fenders, wire harness, connections tires, time and more...and couldn't be happier with cust service, pricing and availability.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


All the parts look great. The trailer that I’m installing them on is in storage. Will be installing them within next couple of months.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Great high quality axles! I installed two of these on a boat trailer with one brake and one idler hub. It was a rebuild from single to dual axles. All the parts were well organized and packaged well and free shipping- thanks etrailer! Good service and value all around. I hauled the boat about 100 miles today and it all works perfectly. A vast improvement in performance.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Joann was very knowledgeable and very helpful.. my trailer axle and parts arrived on time and everything was in order..it doesn’t get any easier..




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


I purchased these axles and brakes to replace the old axles on my car hauler. Everything went smoothly with this order. I received my axle and hubs much faster than I anticipated. The parts were well packaged and everything is exactly as I ordered it. I had never installed hubs on trailer axles but after watching one of etrailer's instructional videos I had both sides of the idler axle done in less than 30 minutes. I had similar results on the axle that I put electric brakes on as well. Dexter axles with the EZ-Lube spindles are well worth the money. Bottom line I couldn't be happier with the products and service.




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Excellent products would tell everyone to buy from etrailer




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


Great support and resolution. Had an issue with shipper loosing item. Was promptly helped and replacement items were received in short time




by:

Review from a similar EZ Lube Axle w Brakes in Trailer Axles


I can not say enough about how good your product is! The installation went very smooth.
I would highly recommend your product.
It was great to see that everything comes with it right down to the grease.


Comments
Great took the trailer to AZ this last year no problems.
James - 05/15/2020

25
141
Show More Reviews

See what our Experts say about this Dexter Trailer Axles

  • Width of Dexter Trailer Axle With Electric Brakes and 4 Drop
    The Dexter Trailer Axle with Electric Brakes - 4" Drop # 8327812-EB measures 89 inches hub face to hub face and about 92 inches if you are including the hub being on, or from spindle to spindle. That said, once the wheel and tire are on the measurement is going to be different depending the sizes of those. As a note, I did want to mention that to choose the correct axle size you will want to find the axle with the same spring center to spring center and hub face to hub face dimensions as...
    view full answer...
  • Can Spring Seat of Axle be Moved a Couple Inches to Allow Axle to Fit on Trailer
    You can move spring seats by having them cut off and rewelded in the correct location so the Dexter axle part # 8327812-EB that you referenced would work for you as long as you'd be willing to do that step. With this axle being 1 inch shorter in length than what you have now you'd have 1/2 an inch less clearance from the inside of the tire sidewall to the frame of the trailer.
    view full answer...
  • Will 89 Inch Hub to Hub Axle Have Enough Clearance for 77-1/2 Inch Frame to Frame Dimension
    It is recommended you have 2 inches of clearance from the trailer frame to the inside of the tire so the 89 inch Dexter Trailer Axle w/ Electric Brakes - 4" Drop - E-Z Lube - 5 on 4-1/2 # 8327812-EB will have the needed tire clearance for a 77-1/2 inch outside to outside trailer frame. This is going to depend on the tires you have. If they are 8 inches or so wide you would be cutting it close. Additionally, they can only be shipped with the spring seats welded on, as that's how we receive...
    view full answer...
  • Where is Drop Measured From for Trailer Axle With Drop Spindle?
    The Dexter Trailer Axle w/ Electric Brakes - 4" Drop - E-Z Lube # 8327812-EB has spindles that drop 4 inches from the center of the trailer axle beam. What this means is that you get an additional 4 inches of clearance from the center of the beam to the spindle.
    view full answer...
  • Parts Needed to Switch Out Mobile Home Axles for New Axles with Electric Brakes
    I have a solution for you, and it looks like you're aware that because these are mobile home axles, you will need to replace everything- the only caveat is that since the dimensions you provided are not standard, any axle you use will require some modifications. You will be able to use the Dexter # 8327812-EB which is an 89" long axle with 74" spring center to spring center; you will need to have the spring seats moved to match your 77" center on center location by a certified welder. I'll...
    view full answer...
    Image 1 for Image 2 for
  • How Exact Does The Spring Seat Measurement Need To Be?
    I spoke with Dexter about the spring seats being ever so slightly off, and they said it is possible to use the Trailer Axle w/ Electric Brakes # 8327812-EB since it is so close, but it may also put more stress on the suspension. This can cause premature wear and isn't recommended. It will be better to either have a local trailer supply store order an axle to your specifications, or order the # 8327812-EB with qty.2 of the 2-3/8" Axle Spring Seat # TRSS238. You will need to remove the existing...
    view full answer...
  • Replacement Axle w/ 86-1/2" Hub Face
    I did some looking around and just heard back from Dexter. I have a solution for you but we do not have anything with a 68.5" spring centers. We do have a few axles that have a 86.5 inch hub face. The lightest capacity one is the Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs item # 8327816. The spring seats are farther out than you need them but you can always remove them and attach new ones. To do this you will need the Truryde Spring Seat for Typical 5,200-lb...
    view full answer...
  • Replacement 3,500 lbs Drop Axle for a 2006 Pace Journey Trailer
    The closest axle we have to the dimensions of the one on your Pace Journey trailer has is the Dexter Trailer Axle w/ Electric Brakes item # 8327812-EB. This is a 4" drop axle with a 3,500 lbs capacity. It comes with everything you need including electric brakes, bearings, and a hub with a 5 on 4-1/2 lug pattern. The E-Z Lube spindles have built-in grease zerks for simple lubrication. The axle is slightly wider at 89" from hub face to hub face but a 1/4" extra on each side won't be an...
    view full answer...
  • Replacement Axle with Hubs & Brakes for Wells Cargo Tandem-Axle Enclosed Trailer FT85162
    The Wells Cargo website indicates that their enclosed tandem-axle trailer model FT85162 has a GVWR of 7000-lbs so it has two 3500-lb axles. The specs did not indicate axle length. We have several 3500-lb axle kits with hubs and brakes that are shown on the linked page. All have 5-on-4-1/2 hubs and electric drum brakes. Two lengths are offered, the 89-inch size like # 35545E-ST-89 and the 95-inch length such as # 7359765-EB. These measurements are from hub face to hub face. Please refer...
    view full answer...
    Image 1 for
  • Installing Brakes on 2017 NuCamp Tag XL and Brake Controller for 2017 Toyota Tacoma Tow Vehicle
    For your 2017 Toyota Tacoma you will want the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers, # 3031-P and the Tekonsha Prodigy P3 Trailer Brake Controller, # 90195. As for putting brakes on the 2017 NuCamp Tag XL, that can be done and I've added a help article below that explains the steps. You will need to identify what axle you have that we can recommend the correct parts. However, I suggest you replace the current axle with a new that already has the brakes installed....
    view full answer...
  • Is There an 89 Inch, 3,500 lb Axle With Drop That Has Hubs and Electric Brakes
    We do have a complete 89 inch axle with a 4 inch drop that includes hubs and electric brakes, though the brakes are manual-adjust, and this is a 3,500 lb axle with a 2-3/8 inch diameter, the Dexter Trailer Axle with Electric Brakes - 4" Drop # 8327812-EB. A 2-3/4 inch diameter axle is not a common size so I'm not quite sure what capacity your axles are but based on the weight of the trailer I looked up, 3,500 lbs for the capacity seems correct, though I recommend just seeing if there's...
    view full answer...
  • Can Electric Brakes be Used on a Boat Trailer
    Modern electric brakes such as those that come with Dexter axle # 8327812-EB can be used on boat trailers. However, I strongly recommend that before submerging the trailer in the water disconnect the trailer's electrical plug from the tow vehicle. No need to take any chances; safety first! If there was a problem caused by the water it would more than likely be the result of exposed wiring somewhere and not the electromagnets themselves. It is recommended to use heat shrink tubing or butt...
    view full answer...
  • Recommended Replacement Axle for Snowbear Trailer
    We do not have a Dexter axle with the 75-5/8 hub face and 64 inch spring centers. What I have that will work as a replacement are the Timbren Axle-less Suspension System like # A35RS545E which includes the brake assemblies, hub/drum assemblies, suspension, and EZ-Lube spindles. These are universal fit kits that mount directly to the trailer frame. All that is needed is a 2 inch square bar that is cut to the custom length (not included) that fits into the integrated holes in the assemblies....
    view full answer...
  • Replacement 3500 Lb Axle With 4 Inch Drop Spindle
    Assuming you need a 3500 lb axle, the # 8327812 with an 89 inch hub face to hub face and a 74 inch spring seat center to center spacing is the closest axle with a 4 inch drop spindle we offer to the dimensions you mentioned. This axle could work for you if moving the tires two inches outboard and needing to remove the existing spring seats and installing # TRSS238 replacements at the proper 70 inch width would work for you. I'm not certain what you mean by a lug nut mounting plate. If...
    view full answer...
  • 3,500 lb Axles Compatible With Timbren Silent Ride Suspension
    Yes, we do have axles with electric brakes that are compatible with the Timbren Silent Ride Suspension for Tandem Axle Trailers w/ 2-3/8" Round Axles # TSR7000T04. A 2-3/8" round axle will be one with a 3,500 lb capacity and we carry a number of options, which I will list for you below. The only thing to be aware of is that in order to choose the correct replacement axle for your trailer you will need to know the dimensions of your current axle's hub face to hub face and spring center...
    view full answer...
    Image 1 for
  • Dexter Trailer Axle with Electric Brakes Components
    The Dexter Trailer Axle w/ Electric Brakes - 4" Drop - E-Z Lube - 5 on 4-1/2 - 89" - 3.5K # 8327812-EB has the Dexter brand hub/drum assemblies as well as Dexter brake assemblies. The components are: # 8327812 Dexter Trailer Axle Beam - Easy Lube - 89" Hub Face - 74" Spring Center - 4" Drop - 3,500 lbs # 23-26 (K23-026-00) Dexter 10" x 2 1/4" LH Electric Brake Assembly - Drivers Side - 3.5K Axles # 23-27 (K23-027-00) Dexter 10" x 2 1/4" RH Electric Brake Assembly - Passengers Side - 3.5K...
    view full answer...
  • Replacement 3,500lb Dexter Axle For Diamond C 3RBT Utility Trailer
    Based on the information you gave me, the closest axle we have is the 3,500lb EZ-Lube Dexter axles which measure 74" from spring center to spring center and 89" from hub face to hub face. While you were looking for 88" hub face to face, this 89" shouldn't cause any issue and is likely the correct size axle that you were needing since 89" is extremely common. Either way, the 1" difference will not be a problem. For a complete axle and electric brake setup with 5 on 4-1/2 bolt pattern you...
    view full answer...
  • Replacement Axle With A Hub Face Measurement Of 63.44 And Spring Center Measurement Of 51.13
    We do not have an axle that has the hub face and spring center to spring center measurements that you need. We do offer Timbren axle less setups that will possibly work for you. You can get something like the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle - Regular Tires - 3,500 lbs, part # ASR3500S06. This particular Timbren would replace a 3,500 lb axle. It would also provide 4" of lift. The axle comes with inner, part # L68149, and outer bearings, part # L44649. This...
    view full answer...
  • Replacement Spindle and Axle Options For a 3,500LB Trailer Axle With Bent 4 Drop Spindle
    It appears that the #84 E-Z Lube Spindle # TRU87FR is the correct spindle for your axle. You can confirm that this is the correct part by verifying the measurements of the spindle and brake flange. The landing for the grease seal is 1.719, the inner bearing is 1.378" and the outer bearing is 1.063". The brake flange bolts are 2-7/8" on center vertically and horizontally. This will also have a grease zerk allowing you to more easily fill your spindle and bearings with grease. Depending...
    view full answer...
    Image 1 for

Do you have a question about this Trailer Axle?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeff D
Installed by:
Jeff D
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Mike S
Updated by:
Mike S
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.