1. Trailer Axles
  2. Dexter Axle
  3. 3500 lbs
  4. 95 Inch Long
  5. Leaf Spring Suspension
  6. No Hubs
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 3,500 lbs

Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 3,500 lbs

Item # 7685269
lowest price pledge
Our Price: $323.56
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 42 lbs
Quantity: 
In Stock
Trailer Axles 7685269 - EZ-Lube Spindles - Dexter Axle
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 80" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately). Lowest Prices for the best trailer axles from Dexter Axle. Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 3,500 lbs part number 7685269 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (19)
  • Q & A (23)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Axles - 7685269

  • 3500 lbs
  • 95 Inch Long
  • Leaf Spring Suspension
  • No Hubs
  • 80 Inch
  • Spindles Only
  • Dexter Axle
  • EZ-Lube Spindles

Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 80" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
  • 4" Drop E-Z Lube spindles
    • Built-in grease zerks for simple lubrication
  • Spring seats, brake flanges, and spindles are welded on
  • Made in the USA


Specs:

  • Weight capacity: 3,500 lbs
  • Hub-face-to-hub-face length: 95"
  • Spring-center-to-spring-center length: 80"
  • Spindle drop: 4"
  • Tubing outer diameter: 2-3/8"
  • Bearings (sold separately):
    • Inner bearing: L68149
    • Outer bearing: L44649
  • Brake flange configuration: 4 bolt
  • Limited 5-year warranty


Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


E-Z Lube Spindles Make Lubrication Simple

The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.


Dexter Axles

Dexter axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle.

Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.



7685269 Dexter Replacement Axle Beam - Easy Lube - 95" Hub Face - 80" Spring Center - 4" Drop - 3,500 lbs






Customer Reviews

Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 3,500 lbs - 7685269

Average Customer Rating:  4.9 out of 5 stars   (19 Customer Reviews)

Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 80" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).

- 7685269
by:

Mission accompolished just a few minutes ago. The attached (3) images attached tell the story. Any customer relocating spring seats should measure closely before welding new seats in place to fit their trailer needs. Again your technical assistance and quick order leave me a very very satisfied customer.. [Thumbs up] 719016



- 7685269
by:

Easy to install, comes with a grease fitting that makes greasing the bearings a cinch! Perfect fit and etrailer shipped it out fast! 856306



- 7685269
by:

As described. I had to have the spring mounts moved in but that's not uncommon. Works as it should, Thanks. 851283



- 7685269
by:

Web site/video were GREAT! Needed this Dexter Axle to repair the car trailer to get to our local race track this week. Communication, tracking of this Axle put me at at ease. THANK YOU! 837454



- 7685269
by:

Great product. I've put about 1800 miles on it. 819554



- 7685269
by:

Great product. 816441



- 7685269
by:

Great product exactly as the description stated. Highly recommend 815803



- 7685269
by:

I have always received quality products and prompt service from etrailer. I was, however, surprised to find that the same axle that I order in the fall of last year had gone up $70 in price and the u-bolt kit price nearly doubled! 815305



- 7685269
by:

Great product. Fast shipping. 800684



- 7685269
by:

Great axle, great price! 779268



- 7685269
by:

Fast delivery, part was the correct one, with one exception. I had to have the mounting bracket repositioned just like the previous one I ordered. Once that is done, it’s a perfect fit. Thus I could only give 4 instead of 5 stars. 737372



- 7685269
by:

William Thank You for getting my Axle here so quick just in time for Christmas!! Great Job!! 734141



- 7685269
by:

Fast and Easy!!! 732680



- 7685269
by:

Best axels available. The bend in the middle prevents the tires from wearing the inside edges down when carrying heavy loads. Shipping is always fast from etrailer. The axel arrived half way across the country in only 3 days! Grear company to deal with. 718539



- 7685269
by:

Product as described and fast shipping another happy customer here 707971



- 7685269
by:

Parts come in one or two days most things are free shipping allways good fit and Quality I would recommend this company to every one I know. 669179



- 7685269
by:

Good quality and fast shipping will definitely buy again 637298



- 7685269
by:

Axle was delivered a day early. Ordered Sun. delivered Wed. It was wrapped and well protected from damage . Website was easy to navigate and product was described well. 607140



- 7685269
by:

All products were as advertised. I used the expedited shipping and received my order in 3 days!!! Great prices and lots of helpful support documentation. I would highly recommend them for your trailer parts needs 571752


21
21

Ask the Experts about this Dexter Axle Trailer Axles

  • Adding Lift to 3,500 lb Trailer Axle
    It's not a stupid question, it's a perfectly logical one but you should not flip the Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles # 7685269 to get rise as this was not the intended design as it is an underslung axle with spring seats that are intended to be on the underside of the axle. There is a way to add lift to a 3,500 lb axle such as the straight Dexter Trailer Axle Beam # 7359765. What you would use is called an over/under kit, which is commonly referred to as flipping...
    view full answer...
  • Can Leaf Springs be Moved to Top of Underslung Axle
    You can absolutely use the underslung Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 3,500 lbs # 7685269 with leaf springs mounted to the top of the axle. In order to do this you will simply need the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 which will work so long as you are using double-eye springs, and fit the 2-3/8" Dexter Trailer Axle Beam # 7685269. The Over/Under kit will lift it approximately the same amount as your axle's diameter plus...
    view full answer...
  • Is 76" Spring-Center Measurement Abnormal for 95" Wide Trailer Axle
    That does make sense. We don't have an exact replacement for your application but if you check out the Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles # 7685269 you can see that it has 95" hub-face and 80" spring-center measurements. Since the hub-face and spring-center measurements can vary from trailer to trailer and yours are fairly close to one that we carry (we only carry a few of the very popular options) I wouldn't say that's abnormal. Even though the spring-center of...
    view full answer...
  • Recommended Drop Axle for Trailer With 80 Inch Spring Center
    The best option we have for you is going to be with the Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles part # 7685269 which has a 3,500 lb weight capacity. This will allow the tires to extend out past your load and will provide you with the low load height you will need. The spring center spacing on this axle is set at 80" but if this does not match what you have on your trailer now then you can always move them to where you need them with part # TRSS238. The leaf springs will...
    view full answer...
  • Recommended Leaf Springs and Leaf Spring Hangers for Dexter 3,500 Lb Drop Axle
    The correct set of leaf spring hangers have more to do with the leaf springs used than the axle. For a set of leaf spring hangers and leaf springs to use with the Dexter Trailer Axle Beam part # 7685269, I recommend the Single-Axle Trailer Hanger Kit part # APS4 with the 3-Leaf Double-Eye Spring part # SP-220275.
    view full answer...
  • Is it Okay to Use Two Axles of Different Capacities on a Tandem Axle Trailer
    Trailer axles will typically have the bend in the axle beam so that when the trailer is loaded down, the beam will flatten out causing the tire treads to make full contact with the pavement. If straight axle beams are used, the wheels could get into a negative camber situation with the trailer loaded, which will cause increased tire wear on the inside edge of the tire tread. Using a higher rated axle isn't recommended as it won't change the load bearing capacity of the trailer. The suspension...
    view full answer...
  • Replacement for Lippert 3500 Lb Axle
    You have a Lippert 3500 lb axle with 10 inch brake assemblies/hub drums. We can't order custom axles, but we do offer a Dexter # 7359765-EB off-the-shelf axle that's very similar, the only difference is that the leaf spring seat center to center distances don't match exactly. This isn't necessarily a big deal, as it's pretty simple to use two replacement spring seats # TRSS238 and to have them tack welded on a 75 inch center. If the existing 80 inch spring seats interfere with the installation,...
    view full answer...
  • Replacement Axle Needed for 4" Drop AL-KO 3,500 lb Axle
    To determine the correct replacement axle for your application I would need you to take the hub-face (HF) and spring-center (SC) measurements (see attached). I reached out to my contact at Dexter Axle and they said that unfortunately the only thing that can be determined from your information is that it should be a drop axle on a 3" tube but aside from that they can't really determine the HF and SC measurements. I am linking our selection of replacement axles for you to check out. We...
    view full answer...
  • Where is Drop Measured on Trailer Axle
    You measured the drop correctly. It would be from the center of the axle to the center of the spindle. That dimension would be the drop. See picture I attached.
    view full answer...
  • Will My Brakes Fit the Dexter Trailer Axle Beam with 4" Drop Part # 7685269
    The Dexter Trailer Axle Beam with 4" Drop part # 7685269 has four bolt brake mounting flanges already welded on. Therefore, if the brakes you have now have this same four bolt brake mounting flange then they will transfer over. The four bolt brake mounting flange is common on 10" x 2-1/4" braking assemblies like part # AKEBRK-35-SA which are commonly found on 3,500 lb axles. If you have a 3,500 lb axle now then they will most likely work for you but you can check by counting the brake mounting...
    view full answer...
  • Is the Castle Nut and Lock Washer Included with the Dexter Axle Part # 7685269
    Yes, the castle nut and lock washer for the spindle will be included with the Dexter Trailer Axle Beam part # 7685269. The spring seats and brake flanges are already welded on so you do not have to worry about that. Assuming you have the standard 5 on 4-1/2" bolt pattern, you can use part # 84545UC1-EZ for idler hubs or part # 23-468-469 and part # 84546UC3-EZ if you have electric brakes.
    view full answer...
  • Replacement for a Marine Master Boat Trailer Axle
    In order to determine whether or not the Dexter Trailer Axle Beam with 4" Drop part # 7685269 will be a good replacement for your Marine Master Boat Trailer Axle we would need to know the distance between the hub faces and spring centers on the axle you have now. It would also be helpful to know your axles weight capacity. The Dexter Trailer Axle Beam with 4" Drop has a 3,500 lb capacity, 95" hub face to hub face, and a 80" spring center to spring center measurement. If this is what...
    view full answer...
  • How Do I Measure the Drop Distance on a Trailer Drop Axle?
    Yes, you are correct. In order to correctly take this measurement you will need to measure from the center of the spindle to the center of the main axle tube. I have included a picture for reference.
    view full answer...
  • How To Lower a Trailer 3 Inches
    I am not really sure what the dealership was referring to as a 22 axle but we do have options for you to lower your trailer. The first option if you have a leaf spring axle is an over/under kit like the Dexter Trailer Springs Over-Under Conversion Kit part # K71-384-00 or part # K71-385-00 but this would only work if your leaf springs are over the axle, not under. If your leaf springs are already under the axle then the next best option would be to replace the axle with one that has a drop...
    view full answer...
  • Replacement Drop Axle for Old Horse Trailer with 6 on 5-1/2 Inch Bolt Pattern
    I would love to help but we do not have any trailer hubs that correspond to the dimensions that you provided. Therefore, the only option we can offer you would be to replace the axle all together. In order to offer a replacement for this we would need to know your spring center and hub face measurements (see photo). If you can provide me with these I can then see if we have an axle suitable for your trailer. For example, the Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindle part...
    view full answer...
  • Does Drop Spindle Add Clearance?
    You are correct, the Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles # 7685269 does lower the trailer. The clearance is the clearance of the spindle from the axle, as you can see in the accompanying photo.
    view full answer...
  • Comparing Amount of Drop of Torflec Axle with a Drop Axle
    The 10 degree up Torflex axle will have the center of the spindle sitting about 0.31" below the bottom of the frame of your trailer under no load. When it is under a full load it will sit about 1.45" above the bottom of the frame of your trailer. If you are wanting a Torflex axle that sits lower then you need the 22.5 degree which has the center of the spindle sitting about 0.52" above the bottom of your frame under no load. Under a full load that will sit about 1.82" above the bottom...
    view full answer...
  • Is the Dexter 7359765-EB A Drop Spindle Axle
    According to our records, you ordered a # 7359765-EB lb straight axle, not a 4 inch drop. For a 4 inch drop spindle axle, you'd want to order part # 7685269. I've linked you to a product description video featuring the Dexter # 7685269 axle.
    view full answer...
  • Will Axle Flex Under Load
    The Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 3,500 lbs # 7685269 does have a 3,500 lb capacity so I assume you just replaced one of the axles on a tandem-axle trailer because otherwise the axle would be far overloaded. Assuming that's true, there is going to be some flex in an axle when it is under a load; if you have a pair of 3,500 lb axles and are hauling something in the neighborhood of the capacity, it will flex even more. Since you said "slightly negative...
    view full answer...
  • How to Mount Leaf Springs to Top of New Boat Trailer Axle
    While we do have a solution for you, the axles we offer are an underslung design, but you can change that to get the leaf springs mounted to the top of your axle with an over/under kit. First, in regards to the axle, to find the right replacement you will need to know the dimensions of your current axle's hub face to hub face and spring center to spring center; the other thing you need to know is the weight capacity of the axle you need, which should match or exceed the GVWR of your...
    view full answer...
  • Can I Change Out Longer Hangars and Short Equalizers for Longer Ones to Gain Fender Clearance
    Since you have only moved things ever so slightly using a longer hanger like the Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall part # E4139 will give you the desired effect and give you the clearance you need. You will want to use one at each connection point so at the end of each spring and above the equalizer.
    view full answer...
  • How To Choose Correct 3,500 Lb Axle for Slipper Spring Setup
    In order to determine which axle is correct for your trailer we need to find out what your hub face (HF) and spring center (SC) measurements are. If you take a look at the photo I have attached for you that should then help with obtaining the above two measurements. The most important thing we need to look for is the hub face as the spring center can then be moved (within a range) if we need to. I have attached a list of the 3,500 lb axles we offer in the varying hub face and spring center...
    view full answer...
  • Does Drop Axle Raise or Lower the Trailer
    A drop axle will lower the trailer trailer deck; each of our drop axles are a 4 inch drop, so that is how much it will lower the deck. In order to choose the correct replacement axle for your trailer you will need to know the capacity you need as well as the dimensions of your current axle's hub face to hub face and spring center to spring center. Here are all the options we carry for a drop axle: - 3,500 lbs: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 89" Long # 8327812 -...
    view full answer...

Do you have a question about this Trailer Axle?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer axles for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Installed by:
Jeff D
Written by:
Alexander C
Updated by:
Hannah L
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.