Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs

Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs

Item # 35545E-ST-89

lowest price pledge

Our Price: $363.05

Trailer Axles

This item qualifies for Free Shipping

Shipping Weight: 100 lbs

Quantity: 
In Stock, Ships Today
Dexter Axle 5 on 4-1/2 Trailer Axles - 35545E-ST-89
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos


  • 3500 lbs
  • 89 Inch Long
  • Leaf Spring Suspension
  • Dexter Axle
  • Electric Brakes
  • 5 on 4-1/2
  • 74 Inch
  • Standard Spindles
Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes complete electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. Lowest Prices for the best trailer axles from Dexter Axle. Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs part number 35545E-ST-89 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (2)
  • Q & A (28)
  • Videos (2)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Axles - 35545E-ST-89

Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes complete electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware.


Features:

  • Axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs
    • Low ride height makes it easier to load and unload your trailer
  • Straight spindle - no drop
    • Standard grease application
  • Spring seats and spindles are welded on
  • Electric brakes are easier to install - no actuator or hydraulic lines necessary
    • Mounting hardware included
  • Cast iron hubs and drums are sturdy and durable
    • Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included
  • Limited 2-year warranty


Specs:

  • Weight capacity: 3,500 lbs
  • Hub-face-to-hub-face length: 89"
  • Spring-center-to-spring-center length: 74"
  • Flange-to-flange length: 82-5/8"
  • Drum dimensions: 10" diameter x 2-1/4" wide
    • Bolt pattern: 5 on 4-1/2"
  • Tubing outer diameter: 2-3/8"
  • Spindle size: 1-1/16"
  • Brake flange configuration: 4 bolt
  • Grease cap: 1.986"
  • Wheel stud diameter: 1/2"
  • Wheel size: 13" - 17-1/2"


Bearing, Race, and Seal Information

  • Bearings
    • Inner bearing: L68149
    • Outer bearing: L44649
  • Races
    • Inner race: L68111
    • Outer race: L44610
  • Seal: 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"


Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


Hub Face and Spring Center Measurements on Standard Trailer Axle

Another helpful measurement to have is the flange-to-flange (C) length, which is measured from the outside of one brake flange to the outside of the one opposite. This length may be easy to obtain if you are replacing an axle, but it's important to note that this measurement is not the preferred method for determining which axle will best fit your trailer.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


Dexter Axles

Dexter axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


T3584F-8974 Dexter Replacement Axle Beam - 89" Hub Face - 74" Spring Center - 3,500 lbs

23-26 Dexter 10" x 2-1/4" Left Hand Electric Brake Assembly

23-27 Dexter 10" x 2-1/4" Right Hand Electric Brake Assembly

84546UC3 Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 5 on 4-1/2

L11404 LubriMatic Marine Trailer Wheel Bearing Grease - 16 oz. Can

6-17 Brake Mounting Nut

5-8 Brake Mounting Lockwasher







Video of Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Dexter Axle Trailer Axles - Leaf Spring Suspension - 35545E-ST-89 Review

Today we're going to review part number 35545E-ST-89. This is the Dexter Trailer Axle with the standard spindles, has the electric brakes, has the hubs of the 5 on 4 1/2 inch bolt pattern. The axle is 89 inches long and it has a 3,500 pound weight capacity. This part will include everything showing here on the table with the axle, the two hub in drums, the two brake assemblies both right and left, includes the inner and the outer bearings. Now the bearing races are included, they are already pre-installed into the hubs, has the grease seals included, the dust caps, the 1/2 inch lug nuts, comes with the mounting hardware to attach the brake assembly to the flange on the axle and it comes with a can of the marine gray wheel bearing grease. Now this axle beam right here will act as part of your trailer suspension system. This could be used to replace an axle on your trailer or you can use it to fabricate the suspension to fit your specific application.

It's made of a high strain steel construction. If you notice here there's a underslung design and by that, that means the spring seats are welded to the underside of the axle. This is where your mount release springs too, so this will give you a nice low ride high which makes it easier to load and unload your trailer. This axle does have the straight spindles, there's no drop to it. It is a standard grease application. This does ship with the included castle nut, the washer and the cotter pin.

Now, when we do ship it, we don't ship it just bare like that, basically, what they do as the machine surfaces they will put grease over to protect it and they'll wrap it with bubble wrap and use a very heavy-duty thick corrugated tube that would mount over it and then be wrapped around it. That will prevent any damage from shipping. Now the spring seats and the spindles are all welded onto the axle. On the axle itself, you might notice it's hard to see in this video but the very middle right here will actually raise up, has a nice bend to it. Basically, the reason that's in there is it creates a zero camber angle for even road-to-thread contact across the wheels of your trailer tires. This one ensure that angle of the wheels is correct for your towing needs, basically what happens is because it's raised in the center, then when your trailer is loaded up and loaded down that weight would push down on that axle which would even straighten that axle out and give your thread on your tires even where all the way across.

That's helps with the straight line acceleration and it gives you a steady controlled towing. Now the electric brakes here are easier to install than any drum brakes. There's no actuator or hydraulic lines necessary. A mounting hardware is all included, to mount these assemblies to the flange on the axle. A cast iron hubs right over here and the drums are sturdy and durable. The dimensions on the drum is 10 inches in diameter, 2 1/4 inches wide.

The bolt pattern is a 5 on 4 1/2 inch bolt pattern and the studs to use a wheel lug size of a 1/2 inch by 20. You can use this with wheel sizes anywhere from 13 inches to 17 1/2 inches. The weight capacity on this is 3,500 pound. The outer diameter on the tubing of the axle is 2 3/8 inches. The spindle diameter is 1 1/16 inches. Again, here's the brake flange configuration. You can see it's the 4-bolt design and also on each end, there's a loop here and a loop down there. This wiring runs through the axle, this is what you would use to connect to your wiring on your trailer to wire up your electric brakes too. Basically, on the axle there's multiple ways to measure the length of the axle beam, but the two most accurate ways are going to be the hub face to hub face and the spring center to spring center length. I'll show you both of those lines. The hub face to hub face length is actually measured from the base of one wheel stud, so another words, that would be measured. You have to have your hubs on your axles to get the correct measurement but you measure from the base of one wheel stud across the axle to the base of the wheel stud on the opposite hub on the opposite side. If you had these hubs installed on this axle, just give you an idea here, the hub face to hub face length to be roughly right at 89 inches. Now the other measurement would be the spring center to spring center length, this actually will give you the approximate width of your trailer and it's measured from the center of the spring seat here to the center of the spring seat on the other side. On this one, we can measure easily because they're already mounted on there. You can see this would be right at 74 inches. Basically, if you're replacing your trailer's axle you should be able to determine which type you need by the trailer's capacity, the bolt of the wheels that are on it, the brake type and then those two lengths, the hub face and spring center lengths. That should do it for the review on part number 35545E-St-89. The Dexter Trailer Axle with the Standard Spindles and the Electric Brakes with the 5 on 4 1/2 inch bolt pattern and a 3,500 pound weight capacity. .


Customer Reviews

Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs - 35545E-ST-89

Average Customer Rating:  3.5 out of 5 stars   (2 Customer Reviews)

Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes complete electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware.

- 35545E-ST-89
by:

On one of the braking hubs, there was a threaded stud missing. Otherwise, everything came as expected. 159109



- 35545E-ST-89
by:

Great high quality axles! I installed two of these on a boat trailer with one brake and one idler hub. It was a rebuild from single to dual axles. All the parts were well organized and packaged well and free shipping- thanks etrailer! Good service and value all around. I hauled the boat about 100 miles today and it all works perfectly. A vast improvement in performance. 641083


3
3

Ask the Experts about this Dexter Axle Trailer Axles
Do you have a question about this Trailer Axle?


  • Replacement Axle with Hubs & Brakes for Wells Cargo Tandem-Axle Enclosed Trailer FT85162
  • The Wells Cargo website indicates that their enclosed tandem-axle trailer model FT85162 has a GVWR of 7000-lbs so it has two 3500-lb axles. The specs did not indicate axle length. We have several 3500-lb axle kits with hubs and brakes that are shown on the linked page. All have 5-on-4-1/2 hubs and electric drum brakes. Two lengths are offered, the 89-inch size like # 35545E-ST-89 and the 95-inch length such as # 7359765-EB. These measurements are from hub face to hub face. Please...
    view full answer...

  • How To Determine Trailer Axle Weight Capacity Rating
  • There is not a number on brake assemblies that tell you what the axle is rated for, but there are ways to get an idea of the load rating. If you have the GVWR of your trailer, you can get a really quick idea of the axle rating based on that number and divide by the number of axles. The brake assemblies can help you narrow down the size possibilities. A 12 inch diameter brake assembly is typically for axles between 5200 and 7000 lbs. A 10 inch diameter is typically for a 3500 lb...
    view full answer...

  • Parts Needed to Add Electric Drum Brakes to Single Axle Trailer with 15-Inch Wheels
  • A great starting point for your trailer brake project is a look at the linked article about adding electric drum brakes to a trailer. You will need to confirm a few details about your trailer in order to proceed. You'll need to know your axle weight rating in order to choose brakes with the right capacity; you need to choose a brake that has the correct mounting bolt pattern for your brake flanges; if you do not already have hub/drum assemblies you'll need to select ones that use the...
    view full answer...

  • Replacement Options for Hub and Drum With 09067 Outer Bearing and 15123 Inner Bearing
  • Unfortunately we do not have any hubs that use those bearing numbers. Your options would be to remove your old spindle and install a new spindle such as # R40484 with compatible hub and drum such as # 84546UC3. You could also replace your entire axle with one such as # 35545E-ST-89, which is rated for 3,500 lbs and has electric brakes. In order to determine the correct axle you would need to measure from hub face to hub face and spring center to spring center like in the accompanying photo....
    view full answer...

  • Parts Needed to Add Electric Drum Brakes to Rockwood Bay Port Camper Trailer
  • It is quite feasible to add electric drum brakes to a camper trailer that does not already have them. You can refer to the linked article on this subject for a good recap of the whole matter. Since your axle spindles do NOT have brake flanges I suggest a whole new axle. The reason is that while brake flanges can certainly be welded on, their installation accuracy is critical. This is in no way a DIY type of job. Special jigs and welding experience are required to ensure the flanges...
    view full answer...

  • Availability of 3500lb Axle 89 Inches Long 74 Inch Spring Centers
  • We can come pretty close to the dimensions you mentioned. Dexter Axle # T3584F-8974 is a 3500 lb capacity axle with a hub face to hub face dimension of 89 inches and a spring seat center to center measurement of 74 inches. This isn't the exact spring center dimension you were looking for, but it would be very easy to grind off the old seats and weld replacements like # TRSS238 into place. The standard spindles are compatible with a L648149 inner and a L44649 outer bearing. If you prefer...
    view full answer...

  • Hub and Drum Assemblies and Spindles for Dexter Electric Trailer Brakes for 3500 Pound Axles
  • The brake assembly # 23-112 is rated for 6,000 pound axles, not 3,500 pound axles. For a 3,500 pound axle you will need to look at 10x2-1/4 inch brakes such as # 23-26 for the left side and # 23-27 for the right side. These mount to a 4-bolt flange, such as # 4-34 for 1-3/4 inch round axles, or # 4-35 for 2-3/8 inch round axles. Brake mounting flanges need to be installed by a qualified professional with experience welding on brake flanges because it is a precision job requiring special...
    view full answer...

  • Replacement Axle Options For Procraft 190 Boat Trailer
  • I have attached a link to our product page for the 3,500 lb trailer axles we offer. All of our beam axles measure 89 inches hub face to hub face. You can go with an axle that has electric brakes and the hub like part # 35545E-ST-EZ-89. This axle measures 89 inches hub face to hub face and the hub has a 5 on 4-1/2 wheel bolt pattern. This axle has EZ-Lube spindles that have built-in grease zerks that makes it easy to lubricate. We also have an axle like part # 35545I-EZ-89 that has...
    view full answer...

  • Recommended Replacement 3,500 Lb Trailer Axle
  • For you to upgrade your system you will need a new axle along with the hub. It looks like you were looking at the Dexstar Vintage Steel Wheel, part # AM20395. This is a 4 lug wheel that would be used on a 3,500 lb axle. I will make some recommendations for 3,500 lb systems for you. I would recommend a system that includes the hubs or for a system with brakes a system that includes the hub, drums, and brakes. One system I recommend is the Dexter Trailer Axle with Idler Hubs, part...
    view full answer...

  • What Information is Needed to Find a New Axle for Electric Brakes?
  • Electric brakes are usable with a boat trailer, you would just need to unplug them before backing in the water. If you are looking for a new axle you would need to know the weight capacity of your current axle as well as the dimensions from hub face to hub face and spring center to spring center, as you can see in the accompanying photo. For example, Dexter Trailer Axle # 35545E-ST-89 comes with electric brakes installed, has a 3,500 lb weight capacity, measures 89" hub face to hub...
    view full answer...

  • Replacement 3500-lb Axles for Car Hauler Trailer
  • We do offer axle kits that come complete with brake assemblies, hubs, bearings, races, etc, such as the part you referenced, Dexter # 35545E-ST-89. This kit provides components that match up the specifications you provided: 3500-lb rating, 89-inch length, 74-inch spring centers, 5-on-4-1/2 bolt pattern; these will work with 15-inch wheels. A video on this kit is linked for your reference.
    view full answer...

  • Heavy duty axels
  • There are numerous capacity trailer axles you could get as well as different lengths, styles, and with different equipment. We carry only the most common straight axles and several axle-less systems such as # ASR5200S01 rated for 5,200 pounds. If none of the axles we carry fit your needs then you would need to order one to your specifications from a local trailer supply store.
    view full answer...

  • Can Hubs be Replaced with Hub and Drum Assemblies on a Mobile Home Axle
  • Mobile home axles are meant for one-time use only according to the manufacturer. I advise against continuing to use them. Also, there isn't a hub and drum assembly that would fit (unless the inner and outer bearings on the axle are standard. I would have to know the bearing numbers to check). It might actually be more cost effective to replace the axles with some that come with hubs and drums and electric brakes. That way you get all new parts that are all standard and compatible with...
    view full answer...

  • Can Electric Drum Brakes be Added to a Utility Trailer
  • It can be possible to add electric drum brakes to an existing trailer that does not have them. The linked article explains in detail. The trailer will need to have or be fitted with brake flanges, the brake assemblies and hub/drums of matching dimensions and trailer wiring to support the brake circuit. The tow vehicle will have to be equipped with a trailer brake controller and a suitable trailer socket to match the one on the trailer. Typically trailers with brakes use a 7-way RV-style...
    view full answer...

  • Available Trailer Axles in 2200- and 3500-lb Ratings
  • Our main page for all beam trailer axles is linked for you. None of these has spring centers spaced at 50-inches' our are 48- or 58-inches but you could have the spring seats moved, or add new ones, both done by a qualified welder. As for the bolt-pattern of the hubs, we have 6-on-5-1/2 hubs and 6-on-6 hubs, but none that are 6-on-5. The linked article will help you determine which bolt pattern you have. All hubs are also linked for you on a separate page. We do offer complete axles...
    view full answer...

  • Axle Needed with 89" Hub Face and 74" Spring Center Measurements
  • If you are looking for an axle and hub combo that has a hub face of 89" and a spring center of 74" then we do have a few options for you. We have both idler hubs and hub and drum assemblies both of which come with either an EZ lube cap or a standard grease cap. Electric Brakes Standard Cap - # 35545E-ST-89 Electric Brakes EZ Lube Cap - # 35545E-ST-EZ-89 Idler Hub Standard Cap - # 35545I-ST-89 Idler Hub EZ Lube Cap - # 35545I-EZ-89 All of these alone are rated for 3,500 lbs and...
    view full answer...

  • Availability of 3,500 lb Trailer Axles
  • We do carry a select few axles. For a 3,500 lb axle we only have one size. It measures 89 inches from hub face to hub face and 74 inches between spring centers. If this doesn't match your trailer's needs then you would need to find a local trailer shop that can order you in custom axles and have them order the correct size. For an axle with brake hubs you would want the part # 35545E-ST-89 or for idler hubs part # 35545I-EZ-89.
    view full answer...

  • Availability of Trailer Axles to Replace Mobile Home Axles
  • We do carry a few axles that could potentially work but you will need to take a couple measurements to determine what you would need. You will need to measure from hub face to hub face on your current axle and then from the center of one spring seat to the other. With those dimensions you will be able to pick out the correct axles. We only carry a select few axles at this time. If you check out the link I attached you can see them all. You would need to use the filters on the page to...
    view full answer...

  • Options for Putting New Hubs on a Utility Trailer that has an Old Chevy Axle
  • I wish I had something I could offer you, but the spindle dimensions you gave me are very different from the spindle dimensions we have hubs for. You could replace your spindles with something like the Trailer Spindle part # SP204BT8. This spindle is for 2,000 lb axles. If you need a higher capacity you might be interested in the Trailer Spindle part # R20384EZ, this is for 3,500 lb capacities and has a brake mounting flange. Spindles have to be professionally installed as they have to...
    view full answer...

  • Availability of a 3500 Pound Axle with Spring Seats on Top of the Axle
  • The axles we currently offer, including # 35545E-ST-89 are all set up to have the axle mounting on top of the leaf spring stack. But you can use an over-under conversion kit, # K71-384-00, that will allow you to move the leaf spring stack to the top of the axle like you want.
    view full answer...

  • Determining Correct Replacement Axle for 1986 Prowler 5th Wheel Trailer
  • In order to locate a compatible axle replacement for your 1986 Prowler 5th Wheel Camper, you will want to take a few measurements on your existing axle, along with verifying its capacity. When measuring an axle for replacement, you will want to first measure its hub face length. This refers to the length of the axle from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle. Then you will measure its spring center, which is measured from the center...
    view full answer...

  • How to Know if Dexter Axle 35545E-ST-89 Will Fit 2008 KZ Coyote Rock Climber
  • We don't carry every axle on the market, but what you can do is measure the distance from hub face to hub face on what you currently have and then measure the distance between the spring seats to see if the part # 35545E-ST-89 would work. It has a distance of 89 inches from hub face to hub face and 74 inches between spring seats on center. If you have different dimensions you would need to find a local trailer shop who can order you in custom axles to the specs you need.
    view full answer...

  • Replacement Axles Needed for 2006 EZ Loader Triple Axle Trailer with 74" Spring Center Measurement
  • We do have a selection of axles with a 74" spring center measurement but you will want to measure your hub-face-to-hub-face measurement as well to make sure that it is 89" before ordering (see attached picture). These are all rated for 3,500 lbs and come in a variety of ways. For example, part # 35545E-ST-EZ-89 comes with electric brakes and has hubs with a 5 on 4-1/2" bolt pattern, part # 35545I-EZ-89 comes with idler hubs that have a 5 on 4-1/2" bolt pattern, and part # T3584F-EZ-8974...
    view full answer...

  • Will Dexter Trailer Axle 35545E-ST-89 Fit a 2011 R Vision Trail Sport 27QBSS Travel Trailer
  • Based on the specs I found on the 2011 R Vision Trail Sport 27QBSS it likely had two 3,500 pound axles. Provided that the specs of Dexter Trailer Axle # 35545E-ST-89 match the original axles you can use them. Some things to note about this axle: The spring seats are mounted on the bottom of the axle meaning it was designed for leaf springs to attach to the bottom of the axle. If yours are meant to attach at the top then new spring seats would need to be welded on by a professional welder...
    view full answer...

  • Parts Needed to Convert Trailer to Electric Drum Brake Operation
  • It is possible to have brake flanges welded to an axle that does not have them, but this requires specialized jigs that ensure perfectly correct alignment. Any errors in the orientation of the brake flange can cause all sorts of issues with brake performance and brake wear. This is not a typical DIY kind of project. Often when converting a no-brakes trailer to electric drum brakes it is far easier and often also more cost effective to simply replace the axle with one that includes brake...
    view full answer...

  • Recommended Axles, Brakes, Hubs And Drums For 1998 Fourwinns 20 Foot Horizon Boat
  • Dexter does make a 4,000 lb axle, but unfortunately we do not carry them. I do have another option for you though. I recommend the Timbren Axle-Less Trailer Suspension System, # ASR5200S04. This axle-less system has a built in suspension and brake flange. The deflection or suspension travel is 2-3/4 inches. This axle-less system is nice in that it gives you more clearance in-between your wheels. For this system, I recommend the Trailer Hub and Drum Assembly - 5,200-lb Axles - 6...
    view full answer...


Do you have a question about this Trailer Axle?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer axles for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Lindsey S
Expert Research:
Michael H
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Adele M
Photos by:
Jim W
Photos by:
Sam P
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.