1. Trailer Axles
  2. Dexter Axle
  3. 2000 lbs
  4. 72 Inch Long
  5. Leaf Spring Suspension
  6. Idler Hubs
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs

Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs

lowest price pledge
Our Price: $347.55
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 39 lbs
Quantity: 
20545I-EZ-72-15 - 2000 lbs Dexter Axle Leaf Spring Suspension
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Straight trailer axle measures 72" from hub face to hub face and 58" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 13" to 15" wheels. EZ-Lube spindles for simple lubrication. Lowest Prices for the best trailer axles from Dexter Axle. Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs part number 20545I-EZ-72-15 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (21)
  • Q & A (32)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Axles

  • 2000 lbs
  • 72 Inch Long
  • Leaf Spring Suspension
  • Idler Hubs
  • 58 Inch
  • 5 on 4-1/2
  • Dexter Axle
  • EZ-Lube Spindles

Straight trailer axle measures 72" from hub face to hub face and 58" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 13" to 15" wheels. EZ-Lube spindles for simple lubrication.


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs
    • Low ride height makes it easier to load and unload your trailer
  • Straight, EZ-Lube spindles - no drop
    • Built-in grease zerks for simple lubrication
  • Spring seats and spindles are welded on
  • Cast iron idler hubs are sturdy and durable
    • Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included
  • Limited 2-year warranty


Specs:

  • Weight capacity: 2,000 lbs
  • Hub-face-to-hub-face length: 72"
  • Spring-center-to-spring-center length: 58"
  • Hub bolt pattern: 5 on 4-1/2"
  • Tubing outer diameter: 1-3/4"
  • Spindle size: 1-1/16"
  • Grease cap outer diameter: 1.986"
  • Wheel stud diameter: 1/2"
  • 6-1/2" Diameter hub flange, for use with 13" - 15" wheels


Bearing, Race, and Seal Information

  • Bearings
    • Inner bearing: L44649
    • Outer bearing: L44649
  • Races
    • Inner race: L44610
    • Outer race: L44610
  • Seal: 10-60
    • Inner diameter: 1.50"
    • Outer diameter: 1.987"


Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle.


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


Dexter Axles

Dexter axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


T20BTR-EZ-7258 Dexter Replacement Axle Beam - Easy Lube - 72" Hub Face - 58" Spring Center - 2,000 lbs

8-258-5UC1-EZ Dexter Easy Lube Trailer Hub Assembly for 13" to 15" Wheels - 2,000-lb Axles - 5 on 4-1/2 - L44649

L11402 LubriMatic Marine Trailer Wheel Bearing Grease - 14 oz. Cartridge

Item # 20545I-EZ-72-15






Customer Reviews

Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs - 20545I-EZ-72-15

Average Customer Rating:  4.8 out of 5 stars   (21 Customer Reviews)

Straight trailer axle measures 72" from hub face to hub face and 58" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 13" to 15" wheels. EZ-Lube spindles for simple lubrication.

- 20545I-EZ-72-15
by:

I'm very happy with the axle w/ idler hubs installed on my RoadRunner 2000lb trailer hauling my 16ft Boston Whaler. The package arrived missing one wheel bearing and a damaged dust cap however eTrailer customer service was quick to resolve the issue. I'm happy with the customer service I received and after watching eTrailer's DIY videos, installing the new axle was a breeze. I would recommend eTrailer to anybody needing quick cost effective trailer repair/upgrades. 551335



- 20545I-EZ-72-15
by:

The axle fit perfectly and delivery was very quick. It would have been helpful if I was told the axle was round as my damaged axle was square. That means I had to scramble around locally and find u-bolts that fit as my square bolts wouldn’t hold the new axle securely.... 859156



- 20545I-EZ-72-15
by:

Axle and all parts still holding up! 793743



- 20545I-EZ-72-15
by:

Used for a replacement axle it fit like a glove no problems very good service. 763367



- 20545I-EZ-72-15
by:

Like a brand new trailer 717749



- 20545I-EZ-72-15
by:

I purchased a replacement axle for my Luodo 3500lb Trailer. Geoffrey was great and very helpful. The only thing was the new axle has a 2" diameter replacing a 3" diameter axle. I wish I new that when I made the purchase. I would of bought new u-bolts and mounting hardware as well. No big deal, light weight trailer. Other than that I will be doing business with them again. Excellent service...They also sent me a tube of grease for the new hubs and bearings that I was not expecting. Thank you 690300



- 20545I-EZ-72-15
by:

Product knowledge is an important to me, understanding the diffence in two parts that appear the same is why you need to shop here too. Getting your parts the next day with free shipping. I will let you add that up in your own head. 636378



- 20545I-EZ-72-15
by:

Very user friendly,I had two orders,both arrived earlier than expected, all parts and everything was as described, packaged very well,seems to be good quality...would recommend etrailer.com to anyone looking for quality trailer parts at good cost..Thank you!! 613199



- 20545I-EZ-72-15
by:

Quick delivery with tracking link! Great product and price!! Easy process to install axle and hubs. I would have appreciated a torque specification for the U-Bolts and Lug nuts in the video. I didn't take the time to search other locations or Q&A. Tip: 1-1/2 " PVC makes a great tool to seat the grease seals. I used my 28MM socket, it was very close to size. I decided to use 2" Schedule 40 PVC pipe to install the E-Z Lube dust seal. I have many tools however no wooden hammers. 564493



- 20545I-EZ-72-15
by:

This has put my trailer back on the road. Took about an hour to install, including hand packing the four wheel bearings with grease. This may not have been necessary with the EZ-Lube option, but I'm really picky about bearing lubrication. After installation was complete, I did use the fitting on the end of the spindle to pump the hubs full of grease, and I'm sure this will negate any need to disassemble the hubs in the future just to grease the bearings. 487068



- 20545I-EZ-72-15
by:

This has put my trailer back on the road. Took about an hour to install, including hand packing the four wheel bearings with grease. This may not have been necessary with the EZ-Lube option, but I'm really picky about bearing lubrication. After installation was complete, I did use the fitting on the end of the spindle to pump the hubs full of grease, and I'm sure this will negate any need to disassemble the hubs in the future just to grease the bearings. 487136



- 20545I-EZ-72-15
by:

This axle was the closest fit to what I needed for my drift boat trailer. I had to modify the trailer a bit, but overall it was an easy install. The only problem was that one of the grease cups got dented during shipping and wouldn't fit. I called the company and was sent a new one. I got a little grief from the person who took my call because I'd tossed the rubber plug out when I threw the dented cup away. I could have done without the lecture that I got from the call taker. 430824



- 20545I-EZ-72-15
by:

good quality and great installation videos the only issues were grease was crushed in box and retaining ring was missing but the quick response of the support staff in getting another out to me was fantastic. Job well done 423763



- 20545I-EZ-72-15
by:

Easy installation, product operating as it should pleased with price! 316046


Comments
No problems still working like new
Bill G - 11/12/2017

30764

- 20545I-EZ-72-15
by:

EVERYTHING FIT PERFECT THANK YOU 306640



- 20545I-EZ-72-15
by:

The trailer axle assembly was sent promptly and was easy to assemble. Great quality and easy to put together with the helpful videos you have on the etrailer website. Thanks for everything! 303009



- 20545I-EZ-72-15
by:

Product is excellent. Shipping is fast 280873



- 20545I-EZ-72-15
by:

Excellent axle. Easy to install. No problems after one year and more than 1000+ miles. 249392



- 20545I-EZ-72-15
by:

I purchased an entire axle 'package' so I could put a leaf spring suspension under my vintage 1980 utility trailer that never had a suspension before. All of the products arrived securely packaged and I received everything I had ordered. The parts all went together exactly as they should, and the Etrailer video's and .PDF Instruction files were very helpful in assemblying everything. I'd definitely recommend these axle/suspension products! Steve 198340



- 20545I-EZ-72-15
by:

All items were well packaged. I was happy that etrailer called me to let me know that a few items were back ordered and an expected shipping date to see if it still suited my schedule (which it did). I think all the items shipped the next day. Shipping was very fast and FREE. I will use etrailer for any future towing needs. Excellent communication and the helpful staff make this a great business to deal with. 183981



- 20545I-EZ-72-15
by:

Please be patient ,will be back with good story and pictures soon.I have VA appointments Im going thru right now. Thankyou 170748


22
22

Ask the Experts about this Dexter Axle Trailer Axles

  • Hub, Leaf Spring, and U-Bolt Kit for 2,000 lb Trailer Axle
    The Dexter Trailer Axle w/ Idler Hubs # 20545I-EZ-72-15 is designed to fit 2,000 lb trailer axles. If that's what you have then this will fit and the U-bolt kit part # APUBR-10 that you referenced would also work since that's what it's designed to fit. The leaf spring part # SP-169275 is also a 2k axle spring but you'll want to make sure the length matches what you need too. This has an overall lenght of 20-3/8 inch.
    view full answer...
  • Can Spring Seats Be Attached On Top of Dexter Axle # 20545I-EZ-72-15
    We do not offer a version of the Dexter Trailer Axle w/ Idler Hubs # 20545I-EZ-72-15 with the spring perches on top of the axle tube but you really wanted to you could have them removed and rewelded onto the other side. Or you could just weld new ones on the side you want with part # TRSS175.
    view full answer...
  • Axle And Suspension Recommendation For Utility Trailer
    I think the easiest way to get the parts you need for your trailer is to buy an axle kit that comes with the idler hubs, bearings, races, seals, grease caps, wheel studs, and lug nuts. For the weight you are saying you will be carrying I recommend starting with the Dexter Trailer Axle w/ Idler Hubs, part # 20545I-EZ-72-15. This system has a 5 on 4-1/2 bolt pattern so the tire/wheel combo I recommend is the Karrier ST205/75R14 Radial Trailer Tire with 14 inch White Wheel, part # AM32153....
    view full answer...
  • How To Install E-Z Lube Axles
    The E-Z lube feature is located in the spindle not on the hub assembly. The spindle has a grease fitting on the end to allow for easy lubrication. As long as the hub is compatible with your spindle then it will not need to be rated for E-Z lube applications. If you want to install an E-Z lube setup, you will want to replace your trailer's axles as the bearing buddies are not compatible with E-Z lube in addition to the difficulty of replacing a trailers spindle. In order to recommend...
    view full answer...
  • 72 inch Long Trailer Axle Recommendation with 2,200 lb Capacity that can Fit 14 inch Wheels
    The difference is the mounting flange on the hubs. Axles that have larger mounting flanges like the part # 20545I-EZ-72-15 can fit the larger wheels, whereas the # 20545I-EZ-72-10 has a small flange that doesn't match up to the bigger wheels. What you would want to do is go with the axle part # T20BTR-EZ-7258 that does not have hubs with it and then use the hubs # 8-258-50UC1-EZ that has the larger mounting flange on it and will give you the 2,200 lbs capacity you want in the correct size.
    view full answer...
  • Castle Nut Wont Thread All the Way on 2,000 lb EZ Lube Spindle with Tang and D Washer
    Thank you for all the photos! My contact at Dexter Axle confirmed that on a 2,000 lb axle, the D-washer # 5-23 is not needed. It is only required on 3,500 lb axles and above. So, in your case it's perfectly safe to leave it off and this way allowing the castle nut # 165686 to fully thread on the spindle. When tightening the spindle nut it should be tightened to the point that you can feel resistance in the bearings, then backed off to the point where you can bend the tang properly which...
    view full answer...
  • Difference Between Dexter EZ-Lube Axles
    Those axles do not have the same weight rating but are otherwise the same. The Dexter Trailer Idler Axle # 20545I-EZ-72-10 is rated for 2,200 lbs while the Dexter Trailer Axle # 20545I-EZ-72-15 is rated for 2,000 lbs. Apart from that, each axle measures 72" hub face to hub face and 58" spring center to spring center. They use straight, EZ-Lube spindles and have idler hubs that have a 5 on 4-1/2" bolt pattern.
    view full answer...
  • How Long Would an Axle have to be to Use 15 Inch Tires on a Trailer that is 60 Inches Wide
    An ST205/75-15 tire will be about 8 inches wide. Assuming the wheels you use have a zero offset the minimum length of the axle, measured from hub face to hub face, would need to be 70 inches. The axles that we have that are 72 inches long are all either 2,000 or 2,200 pound axles.
    view full answer...
  • What is the Capacity of the Axle in Dexter Trailer Axle Kit with Idler Hubs 20545I-EZ-72-15
    For trailer axle # 20545I-EZ-72-15 the axle itself is rated for 2,200 pounds. The axle alone is # T20BTR-EZ-7258. The hubs that are included with # 20545I-EZ-72-15 are rated for 2,000 pound axles so since they are lower than the axle itself the rating for that whole system is 2,000 pounds. If you need a 2,200 pound set up you would use axle # T20BTR-EZ-7258 and 2 of hub # 8-258-50UC1-EZ.
    view full answer...
  • Does Dexter Axle 20545I-EZ-72-15 have a Front and a Back
    The axle part # 20545I-EZ-72-15 does not have a front and back. As long as you orientate the axle properly so that the bow of it faces down the axle can face either direction. This axle needs to install above the leaf springs.
    view full answer...
  • Are Trailer Axles for Drum Brakes Different From Trailer Axles For Disc Brakes
    The axles we offer do work great with disc brake setups. The brake mounting flanges are the same between drum and disc brake setups on trailer axles and the hubs of either setup are designed to fit on the same spindle dimensions so either setup would work well.
    view full answer...
  • Replacement 72 Inch Long 2,000 Pound Trailer Axle
    Trailer axle # 20545I-EZ-72-15 could fit in place of an axle with spring seat center spacing of 57-1/8 to 57-3/8 inches. At the very most the spring seats will have to be cut off and new ones, # TRSS175, welded on by a qualified professional welder for a nominal fee. Another option is an axle-less system, # A20RS545, which is rated for 2,000 pounds and comes with idler hubs. The suspension is built in. With this type of system you will not have to worry about replacing worn suspension parts.
    view full answer...
  • How to Choose the Correct Axle for a 2,000 lbs EZ Loader Trailer
    We can most certainly help you to replace your axle and hubs on your 2,000 lbs trailer. If you are wanting to go with a standard axle you will need to pick one out that is the same length as the one you have now and that has the same hub-face-to-hub-face (A) and spring-center-to-spring-center (B) measurements of your current axle. I have attached a picture that demonstrates how to find these measurements. You will also need to pick if you need idler hubs or if they need the brake flange...
    view full answer...
  • What Information Is Needed From Existing Axle To Find A Replacement Axle
    In order to find a correct replacement axle for your trailer, you will want to match the existing axle's spring center measurement, hub face measurement, axle weight capacity, and wheel bolt pattern. I have attached a diagram showing where to measure to find the hub face measurement and spring center measurement. My contact at Dexter was unable to provide any information on your axle based on the numbers you provided. There may be a sticker on your axle that includes a part number....
    view full answer...
  • How to Find Replacement Suspension Parts for 1999 Lowe Boat Trailer
    In order to help you get the correct replacement parts for your boat trailer I'll need to know a little bit more info. We do have some axles with a 72" hub-face measurement, like part # 20545I-EZ-72-15, which should be what you're needing, but I'll need you to take a spring-center measurement as well for your axle (see attached). When it comes to replacing your leaf springs you'll need to measure from center-eye to center-eye and this is best done with no load in the trailer. I'm...
    view full answer...
  • Choosing Replacement Spring Seats for Trailer Axle
    It is possible to have new spring seats welded on by a qualified welder but we do not provide this service. We can get you new spring seats; these are shown on the linked page. Choose seats based on your axle diameter. For example, part # TRSS238 fits 2-3/8-inch diameter axles. We do not offer any beam axles with a spring seat spacing of 55-inches. The nearest to that dimension is the 58-inch spacing of the axles shown on the linked page, all of which are 2000-2200-lb rated. If you...
    view full answer...
  • Recommended 72 Inch Axles And Brakes For Tandem Trailer
    The 72 inch axles we offer have all got a weight capacity of 2,000 lbs. Also, none of the 72 inch axles have a brake mounting flange attached. You would need to have the components for a brake assembly installed on one of the axles. I recommend the Dexter Trailer Axle w/ Idler Hubs, part # 20545I-EZ-72-15, for the axle that you said you want free rolling. This has an EZ-Lube spindle with a 5 on 4-1/2 bolt pattern and has the bearings, races, seals and hubs included. This axle will work...
    view full answer...
  • What Trailer Dimensions would the Dexter Trailer Axles # 20545I-EZ-72-15 Fit
    The Dexter Trailer Axles # 20545I-EZ-72-15 that you referenced will fit a trailer that has the following dimensions. The axle it replaces will need to have a hub face to hub face dimension of 72 inches, you will need to measure the distance between the spring centers of the trailer, if that dimension is 58 inches it will connect to your suspension system. The wheel bolt pattern of your wheels will need to be 5 on 4-1/2 inch, and the capacity of this axle is 2,000 lbs. I attached...
    view full answer...
  • Replacement Hub Assembly with 15123 Inner Bearing and 09067 Outer Bearing
    Unfortunately it doesn't look like we've got any hubs that will work for this size spindle. For that reason, your best bet is likely going to be to replace the entire axle with a new one # 20545I-EZ-72-15 which comes with hubs included with a 5 on 4-1/2" bolt pattern, and the EZ lube spindles allow you to keep your bearings well lubricated. You will want to verify that your current axle's dimensions measure 72" from hub face to hub face and 58" from spring center to spring center, in...
    view full answer...
  • Parts to Flip 2,000 lb Dexter Trailer Axle With Idler Hubs
    There is a way for you to flip the axles of the Dexter Trailer Axle with Idler Hubs # 20545I-EZ-72-15 you asked about, though the over/under kit you mentioned won't work because this axle is too small in diameter. So while there isn't a similar kit for the 1-3/4" axle tube of the Dexter axle, you can put together the pieces needed, which are the following: - U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles # APUBR-10 - Spring Seat for Typical 2,000-lb, Round Trailer Axles with...
    view full answer...
  • Comparing the Single-Axle Trailer Hanger Kits for Double-Eye Springs APS1, APS2, and APS3
    When choosing between the Single-Axle Trailer Hanger Kit for Double-Eye Springs part # APS1, part # APS2, and part # APS3 it will be best to use the one that has measurements that most closely resemble what is already on your trailer. For example, if your rear leaf spring hangers are 7/8" tall or shorter than you would want to use part # APS1 but if they are taller then this you would want to use part # APS2 or part # APS3. The only difference between the two latter kits is that part #...
    view full answer...
  • Replacement Axle for 5 x 10 Utility Trailer
    Thank you for all the information; you seem to know the measurements you need, which are hub face to hub face and spring center to spring center. The closest axle we have to the measurements you gave is the Dexter # 20545I-ST-72-15, which measures 72" from hub face to hub face and 58" from spring center to spring center as shown in the accompanying photo. This axle has a 2,000 lb capacity, have idler hubs with a 5 on 4-1/2" bolt pattern (I have attached a link to a help article on determining...
    view full answer...
  • How to Determine Leaf Spring Hanger Placement on a Single Axle Trailer
    Generally speaking, on a single axle trailer you will want the leaf spring hangers to be spaced apart 1/2" less than the eye to eye measurement of your leaf spring. Therefore, you will want to place the hanger 25-1/2" apart on center when using the 4-Leaf Double-Eye Spring part # SP-124275 with the Single-Axle Trailer Hanger Kit part # APS4. Please keep in mind that you will need to determine the correct position of your Dexter Trailer Axle part # 20545I-EZ-72-15 before welding the leaf...
    view full answer...
  • Axle, Hubs, Tire and Wheel Recommendation for Homemade 2,000 lb Trailer
    While I totally understand the convenience of having a spare that can be used on either your trailer and your van, I cannot recommend using automotive tires on a trailer (or vice versa), and here's why. ST (Special Trailer) tires are made for a specific purpose—supporting the vertical load and cornering forces of trailers, which is why their sidewalls are stiffer. P (Passenger) tires are designed with more flexible sidewalls and are made with passenger comfort and steering in mind and...
    view full answer...
  • Replacement Axle/Suspension for 4X8 Utility Trailer
    In order to put larger wheels/tires on your 4 X 8 utility trailer you may need to change out other components, such as the axle, in order to have the required clearance between the tire and trailer frame. Please note that changing the wheels/tires to a larger size and/or with a higher weight rating will not increase the trailer's weight carrying capacity. We do offer longer axle kits that would have the spindles extend further from the outside edges of the trailer, such as # 20545I-EZ-72-15,...
    view full answer...
  • Replacement 2K Idler Axle for Carry-On Trailer Model 5x10GW2K
    Carry-On steel-mesh trailer model 5x10GW2K uses a 2000-lb-rated idler axle. We have several 72-inch 2K-rated idler axle kits that come complete with hubs, bearings, races, seals, etc. We do not offer 2K axles without hubs. All of these use a leaf spring center spacing of 58-inches. You can see all kits by clicking on the link provided. We have both 4-on-4 and 5-on-4-1/2-inch bolt pattern kits, so just click on your wheel bolt pattern to see suitable options. Since your trailer uses...
    view full answer...
  • Replacement Hubs for Old Trailer That Uses Inner and Outer Bearing LM67048
    First, thank you for providing those important details about your trailer. Bearing part # LM67048 is a common OUTER bearing for 6- and 8-lug hubs, but as an INNER bearing we offer only one 4-on-5 agricultural hub that takes this item as its inner bearing. That hub is part # AH15450ECOMP. I presume that you got the bearing part numbers from the original parts. Given the trailer's age it may be that someone previously substituted a different bearing for what was originally installed....
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer axles for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Installed by:
Jeff D
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Sarah W
Updated by:
Mike S
Video Edited:
Dustin K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.