bing tracking image
  1. Tow Bar Wiring
  2. Acura
  3. TL
  4. 2004
  5. Roadmaster
FITS 2004 Acura TL
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit

Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit

Item # RM-15267
Retail:$162.28
Our Price: $142.57
You Save: $19.71
Tow Bar Wiring
Confirmed to Fit
2004 Acura TL

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 4 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-800-940-8924 for expert service. We are your Acura tow bar wiring experts, and offer a great price. etrailer.com carries a complete line of Roadmaster products for your Acura TL 2004. Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part RM-15267 from Roadmaster can be ordered online at etrailer.com. Complete tow bar wiring installation instructions and technical support.
  • All Info
  • Reviews (763)
  • Q & A (0)
  • Photos
  • Why etrailer?

2004 Acura TL - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit

  • Diode Kit
  • Splices into Vehicle Wiring
  • Universal
  • Tail Light Mount
  • Roadmaster

Diode kit allows you to use your Acura TL's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. Includes 7-wire to 6-wire Flexo-Coil electrical cord.


Features:

  • Lets you wire your vehicle to accept your RV's tail, brake, and turn signal lights for flat towing
  • Wires towed car as combined system so that brake and turn signals travel along same wire
  • Prevents electrical feedback and the damage it can cause to your vehicle's electrical components
  • Diodes powder coated aluminum case is corrosion resistant and provides protection from the elements
  • Brake light relay (RM-88400 - sold separately) may be required if used with supplemental braking system
  • Flexo-Coil cord is resitant to water, oil, chemicals, and has silicone-injected plugs to prevent corrosion
  • Center pin on 6-Way plug wired to 12V power, there are two industry standards
  • Includes:
    • 4 Hy-Power diodes
    • 4-Wire harness
      • 27" Long
    • Wire connectors
    • Cable ties
    • 1 Ring terminal
    • 3' Long plastic loom
    • 8' Coiled cord
    • Vehicle mounting bracket
    • Socket
  • Made in the USA
  • Limited Lifetime Warranty


Specs:

  • Diode Max amperage: 85 amps
  • Diode Max voltage: 24 volts
  • Coiled cord max length: 8'
  • Coiled cord retracted length: 15"


Note: For applications that have separate lighting, this kit will cause your brake lights to function as both brake and turn signal lights. A wiring converter (118158 - sold separately) and 2 additional diodes (RM-792) will be needed if you want to retain separate turn and brake signals.


Separate vs. Combined Lighting Systems

Some automobiles operate on a 3-wire system, wherein the brake signal and the turn signals travel along different wires to illuminate different lights. (Typically, these vehicles have amber turn signals.) This is referred to as a "separate lighting system". When you hook up for flat towing using this kit, your towed car's lighting system will operate in a combined fashion regardless of whether it typically has combined or separate lighting. This means that the brake and turn signals sent by your RV to your towed car will be carried on a single wire. As a result, your car's brake lights will do the flashing for the turn signals. Your vehicle will still function as designed when not hooked up to your RV.


Diode Wiring Diagram


Diode Wiring Diagram


Diode Wiring Diagram


Diode Wiring Diagram

Do You Need a Brake Light Relay?

Because this kit wires your vehicle as a combined system, a brake light relay (RM-88400 - sold separately) may be required if you use a supplemental braking system with your towing setup. A supplemental braking system depresses the brake pedal in your towed car every time you apply the brakes in your RV. So, if your towed car's brake lights illuminate when the brake pedal is pressed and the engine is off - as is the case when towing - then you need to install a relay to ensure that the lights on your towed car always act in accordance with the signals sent by your RV via the wiring harness. Without a relay, the brake signal from your towed car will override the turn signal sent by your RV when you slow down to make turns, creating a potential hazard.



15267 Road Master Towed Car 4 Diodes RV Plug to 6-Wire Socket Flexo Coil Wiring Kit

Installation Details RM-15267 Installation instructions

Customer Satisfaction Score:


Customer Reviews

Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit - RM-15267

Average Customer Rating:  4.8 out of 5 stars   (763 Customer Reviews)

Diode kit allows you to use your vehicle's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. Includes 7-wire to 6-wire Flexo-Coil electrical cord.

by:
2017 Jeep Wrangler Unlimited

First off, I am NOT a mechanic and I especially HATE auto electrical projects. However, I wanted to wire my Jeep to tow behind my motorhome so I ordered the Roadmaster Diode 7 wire to 6 wire wiring kit (RM 15267). While I think it took me longer to install than those with experience, I am happy to say I got it hooked up and working on my first try! The videos that came on my email confirmation were GREAT and really helped my experience. Thanks so much everyone at etrailer for helping make my project successful!




by:
Ford F-250 Super Duty

This was easy to install and it works very well. I installed it on a Ford 2021 F250 pick up. The pick up does have the separate brake and turn signals, so you need to wire it as such. I would recommend this kit.


Comments
It was easy to install and works very well. Just follow the easy to follow diagram and instructions. I have had it for awhile and it works very well
Vance - 12/30/2022


by:

I had purchased a new tow vehicle for my RV and purchased Item RM-15267. It has been just over 1 year and I towed my car across Canada and back (14'000km) with no issues. The install was not difficult thanks to the excellent instruction videos available online. I am not a mechanic, but have good common sense. Love the quality of all the products received. Thank you very much etrailer for providing quality products with great instructions.




by:
Roadmaster

This roadmaster tow bar has been one of the best. The lights on the side of the tow bar are bright and very helpful to other motorist on the roadway for visibility. It is durable and heavy duty. Very pleased.




by:

Installation was straight forward and took a couple hours. Items work very well, and are still in very good shape.
Have purchased many items from etrailer over the years, and they are always high quality. Customer service is very good whenever I have a question. Their installation videos are some of the best around.




by:

Outstanding product and even better customer service! Two backyard mechanics installed baseplate and braking system with just one call to confirm proper wire connection. Total package works great.




by:

Works as advertised. Installation takes some time but instructions were very good. No complaints.




by:

The install was fairly straightforward and took maybe 5 hours. If you are used to auto work and removing body panels you can probably cut that time in half. Also, make sure you have good drill bits to get through the frame! No problems at all with the base plate after installation.




by:
Dodge Dakota

My experience with etrailer was good from the perspective of the cooperation and pleasantness. However, even though I was clear on the tow bar I had (Blue Ox) and the vehicle I was towing (2005 Dodge Dakota) when the tow package came and the shop I had installing it got to the end of the installation, it was discovered that the wrong pins were sent, i.e. they wouldn't lock in place - too short . At first we couldn't determine what the problem was, so I called etrailer back. Was told those were the correct pins. Finally called Blue Ox directly and the rep immediately told me (after I gave him the PN) that those were the wrong pins. Without me asking he offered and did send two replacement pins free of charge. They worked perfectly.




by:

Works as expected. I hook up and check lights and it works after numerous hook ups


Comments
Works good. Has one isse with water getting into crimp connectors. I recrimped connectors and added shrink tube and works great.
Brian - 07/17/2022


by:
2012 Ford Edge

I ordered this kit to get me a heavy duty coiled cable with room to use one input as a dedicated power supply from the bus to then be sent to the towed battery to keep it charged going down the road.
the diodes i chose not to use, as i have a hopkins plug and play kit on the way, that will marry up the 6 pin fitting
I just needed the cable with the 7 to 6 adapters, it was the best price for the need :)


Comments
zero issues so far.
robert S - 02/22/2020


by:

Product performing well, great customer service and installation videos




by:

Excellent workmanship installing my used Invisibrake.




by:
Jeep

We have towed our Jeep almost 2,000 miles since installing the recommended parts from etrailer and it has worked perfectly on every connect and disconnect along the way. Tows beautifully, even at 70 mph.

Excellent customer service and helpful videos from these folks. Would recommend to anyone needing help with parts and guidance in towing their toad to give them a call.


Comments
Our system is still working perfectly a year later. Our Jeep is a 2018 Cherokee Trailhawk and while we’ve seen some RV forums talk about “death wobble”, we have never experienced this using these Roadmaster products towbar & baseplate. We tow the Jeep with our 39’ Class A gasser and hardly know its back there. Even on sharp corners the Jeep follows perfectly and no binding. Connecting or disconnecting takes maybe 5 – 7 minutes. Then check all of our lights, make sure the Jeep is in neutral wbrakes off and we’re on our way. The braking system that we installed purchased from etrailer is the “Stay-n-Play Duo”. I would recommend that to anyone looking for easy operation. The installation time was a bit lengthy and involved but once completed makes all of your towing trips much easier. Just the flip of a switch and the braking system is ready for towing. No portable unit to lug around and adjust each time you tow your vehicle. The etrailer folks made the perfect recommendations for our needs and everything has worked GREAT!
Brent T - 04/05/2020


by:
2008 Scion xD

I installed the kit. Didn't have many problems. It is a really stout setup. I am very pleased with the kit and very good instructions.




by:
Jeep

Great product for towing our Jeep Gladi ator




by:
2012 Jeep Wrangler

I installed this on my 2012 Jeep Wrangler. This setup has been perfect for my Toad. No issues and easy to install.




by:

Not easy to mount the receptacle on the 2021 Jeep Gladiator bumper. Need some long stainless threaded rod and ss nylock nuts.




by:
2016 Entegra Coach Aspire Motorhome

The wiring kit was mostly OK. They claimed the wiring supplied was 27' long, however, what I received wasn't even 20' long. I had to made a splice on all wiring leads near the front of the bumper. The diodes and rest of the kit worked as described. Upon testing, there were no issues when hooked up to my rig. I also added the brake light relay and wired it through the supplied harness as well.


Comments
I reached out to Roadmaster and they confirmed the wiring with the kit is 27 feet long.
-- Etrailer Expert Thomas M - 01/27/2022


by:

Appeared to be a great kit but it turned out that I did not need it. I never had to use it so I cannot comment about how well it worked. The instructions were clear.




by:

Timely delivery an instructions were accurate and specific for ny vehicle




by:

I had the system installed at a local shop. Simple to plugin and go, and works great.




by:
Honda

These were exactly what I needed. I changed tow vehicles to a Honda HRV (manual) and the only base plate available was the Roadmaster. These adapters took about 10 minutes to change my Blue Ox tow bar to accept the Roadmaster.




by:

Easy and fun to install.




by:

Simple I installed myself just a little tight on factory wiring harness



25
744
Show More Reviews

See what our Experts say about this Roadmaster Tow Bar Wiring

  • Troubleshooting Running Lights not Working With Roadmaster Diode Flexo-Coil Wiring Kit
    What we have found when there is an issue with running lights but not other lights when installing the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 is that the problem is almost always due to an issue with the diodes. So if the wires are not properly routed with the diodes, or there is an issue where a wire was somehow crimped or damaged then the running lights would not work. You need to create a jumper wire and attach the diodes that way, which may have been the...
    view full answer...
    Image 1 for
  • How To Wire a Mercedes-Benz Sprinter (USA/Europe) To a Motorhome for Flat-Towing
    In order to flat-tow a vehicle behind a motorhome you will need some sort of lighting system and for this you have the option of magnetic lights which simply sit on the towed vehicle or diodes which use the factory tail light circuits. The make/model of the towed vehicle is irrelevant for this as the kits are mostly universal and will work on vehicles made in the USA/Europe and those with separate or combined tail lights circuits. That said, what you do need to make sure of is that the...
    view full answer...
  • Tow Bar Wiring For 2020 Jeep Gladiator that Has Install Video Available
    While we don't have a plug and play style of tow bar wiring for your 2020 Jeep Gladiator we do have a really great kit that we had the chance to install in a 2020 Jeep Gladiator just like yours that I attached an install video of that will walk you through the entire process. The part # RM-15267 is what I am referring to which installs by splicing diodes into the taillight wiring.
    view full answer...
  • Troubleshooting Invisibrake Install Where After Cruise Control Stopped Working
    Try checking to make sure the breakaway plunger is fully inserted. We've seen this exact problem before and the issue was fixed by pushing the plunger all the way in.
    view full answer...
  • Connecting Roadmaster Tow Bar Diode Wiring # RM-15267 to 2019 Ford F-150 Right Stop/Turn Circuit
    You only need to make one connection to the right stop/turn circuit of a vehicle like your 2019 Ford F-150 to install diode tow bar wiring like the Roadmaster Diode kit part # RM-15267. So in your situation where you have found a duplicate for the circuit you can just leave it be and use the other and you'll be set. I attached a link to the install video you referenced that shows this kit installed on a 2019 Ford F-150 as well.
    view full answer...
  • Tow bar Wiring For Lighting When Flat Towing 1994 Geo Tracker Behind Motorhome
    The best towing bar wiring option for the 1994 Geo Tracker is the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 which will give you a 6-way round at the front of your Tracker with a coiled cord that connects that plugs into the motor home's 7-way for a nice clean install. The Geo Tracker's lights will activate in sync with the motor homes lights. This is our most popular wiring option. I have attached an installation video for your reference. You will also need...
    view full answer...
  • Tow Bar Lighting Kit Recommendation for 2019 Ford Ranger
    I have a really great tow bar lighting kit that fits your 2019 Ford Ranger that I can show you exactly how it installs on your truck but we don't have a custom fit Hopkins kit for your truck. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will...
    view full answer...
  • Is There a Plug-In Flat-Tow Wiring Harness for a 2017 Jeep Grand Cherokee
    I checked with Hopkins but they do not offer a Hopkins Custom Tail Light Wiring Kit for Towed Vehicles for the 2017 Jeep Grand Cherokee, only the Jeep Wrangler. Instead, I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 which is the best available option. It will require a few minor modifications but there are no plug-in-play options so this is really your only choice.
    view full answer...
  • Tow Dolly Wiring Harness for 2019 Buick Encore
    To wire your 2019 Buick Encore so that it accepts the tail light functions from your RV I highly recommend the Roadmaster Diode Kit # RM-15267. This kit features diodes to prevent any electrical feedback from the RV and will simply wire into the the vehicle's tail lights circuits. It includes a 6-Way connector that will mount to the front of the Encore and enough coiled wiring to go from there to the 7-Way on the RV. I have attached a short video review and the written installation instructions...
    view full answer...
  • Tow Bar Wiring Kit for 2009 Acura TSX
    For tow bar wiring for your 2009 Acura TSX you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
    view full answer...
  • Recommended Flat-Tow Wiring Harness for a 2019 Ford Ranger with LED Taillights
    I am not sure which kit exactly that you are referring to but all of the ones we offer will work with the LED's on your 2019 Ford Ranger. I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 because it has a spot for you to run a charge line if needed and the umbilical cord is very durable so it will last a long time. This will work just fine with LED's.
    view full answer...
  • Recommended Flat Tow Wiring Kit for Lights on 2019 Jeep Wrangler Sport
    We certainly have what you need to wire your Jeep so that it accepts the tail lights from the RV when being flat towed but there isn't a plug-and-play option available for your 2019 Jeep Wrangler Sport. What I recommend using is the Roadmaster Flexo-Coil Wiring Kit # RM-15267, which includes everything needed to set up the lights on the Wrangler. It will wire into the tail light circuits of the Jeep and uses diodes to prevent any electrical feedback. The included 6-Way connector will...
    view full answer...
  • Flat Tow Wiring for 2019 Jeep Wrangler
    In order to flat tow your 2019 Jeep Wrangler I highly recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 because it is designed to prevent electrical feedback and will ensure your Wrangler's electrical system remains safe. I have added a link to a video review and install for you to check out as well.
    view full answer...
  • Is There Chance for Diodes to Overheat on Roadmaster Wiring Kit for 2013 Honda Fit
    The diodes included in the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 are going to be close when you are installing them on your 2013 Honda Fit but there won't be any type of failure or overheating issues as it is standard for these diodes to be close, as you can see by the wiring diagram of the Wiring Kit. As for the loom, there is not a specific part number available from Roadmaster, however this is a simple 3' split plastic loom to house wiring.
    view full answer...
    Image 1 for
  • Troubleshooting Tail Lights not Working With Roadmaster Diode Flexo-Coil Wiring Kit
    If your running lights are not working with the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 but your turn signals are, the issue is likely the diodes. If the wires are not properly routed with the diodes, or there is some issue where a wire was somehow crimped or damaged then the running lights would not work. You need to create a jumper wire and attach the diodes that way, which may have been the problem so you should check to make sure you have your diodes properly...
    view full answer...
    Image 1 for Image 2 for
  • Why Do the Turn Signals Flash On the Toad with the Brakes Applied in the Motorhome
    There are a few different ways that the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 can be installed which will vary based on if the motorhome has a separate or combined lighting system and if the vehicle has a separate or combined lighting system. The 2017 Nissan Frontier has a separate lighting system therefore, I have attached two diagrams for you. There is a diagram if your motorhome has a separate lighting system and there is a diagram if your motorhome...
    view full answer...
    Image 1 for Image 2 for
  • No Running Lights on 2019 Jeep Cherokee Behind Motorhome
    I would love to help but in order to do so I would need to know exactly which flat-tow wiring harness you have and how it is installed. For example, if you are using the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 then the running light circuit is spliced into behind the tail light and then run up to the vehicle side trailer connector with a diode in between. I have attached a wiring diagram of this for you as well. I recommend you check to make sure you are...
    view full answer...
    Image 1 for
  • Is Mopar Flat-Tow Wiring Kit Needed for 2017 Jeep Cherokee Trailhawk
    Yes. You will need to purchase and install Mopar flat-tow wiring kit 68321424AB before flat towing your vehicle, as per Jeep tech bulletin (08-010-17). This kit is available at your local Chrysler and Jeep dealership. I've attached a photo of the bulletin to assist. Basically there is a severe shake and/or bounce that some refer to as "death wobble". This isn't a mechanical issue but rather a wiring solution. This harness solves the issue so you can flat tow safely. If you need help...
    view full answer...
    Image 1 for
  • Right Rear Turn Signal Out Error on Diode Kit Wiring for 2019 Jeep Wrangler
    I forwarded this to my contact at Roadmaster and this is what they send me back: What is catching my attention is that the dash says the right rear TURN signal is out -- the diodes should be tied into the brake signal wire and the tail light signal wire, not turn. Can you tell me the factory wire colors that the diodes are tied into on the right side? I should the FACTORY Jeep wrangler brake wire color as being green and the tail being white w/orange stripe -- Is that the same as the customers...
    view full answer...
  • Will LED Tail Lights on 2018 Jeep JL Wrangler Unlimited Affect Install of Roadmaster Diode Kit
    The Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 will work perfectly on your 2018 Jeep JL Wrangler Unlimited and the vehicle's LED tail lights won't affect the install or function of the kit in any way. You will just follow the attached install instructions like normal. I have attached the mentioned installation video as well.
    view full answer...
  • Where Can Tow Bar Wire be Grounded With Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
    It is always preferable to attach the ground directly to the chassis frame, and where you can safely ground the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 depends on if the owner's manual of your 2018 Toyota Corolla iM specifies a location that you need to attach the ground wire. I cut out a portion of the installation instructions of this kit for you to check out and as you can see it is possible you may need to attach the ground wire at a specific spot to avoid...
    view full answer...
    Image 1 for
  • Tow Bar Lighting Option Recommendation for 2012 Jeep Patriot
    For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV. I prefer this style to the bulb and socket styles that require drilling into the light housing or the...
    view full answer...
  • Tow Bar Lighting Recommendation for 2008 Ford Edge
    For tow bar lighting for your 2008 Ford Edge you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
    view full answer...
  • Best Flat-Tow Wiring Harness for a 2015 Mini Cooper S
    The most popular diode kit we have for a 2015 Mini Cooper S is the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267. This kit comes with four diodes, wiring connectors, 6-way trailer connector for the vehicle, and a coiled 6 to 7-way adapter to connect the toad to the motorhome. We use this kit very often as it performs really well and lasts equally as long. I have attached a review video for you as well.
    view full answer...


< Previous
123. . .110



Do you have a question about this Tow Bar Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tow bar wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Randy B
Test Fit:
Randy B
Employee Andrew S
Test Fit:
Andrew S
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Clayton O
Test Fit:
Clayton O
Employee Bradley B
Test Fit:
Bradley B
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew K
Video by:
Andrew K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Michael B
Video by:
Michael B
Employee Aidan B
Video by:
Aidan B
Employee John S
Video by:
John S
Employee Thomas T
Video by:
Thomas T
Employee Schuyler H
Video by:
Schuyler H
Employee Jeff D
Installed by:
Jeff D
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video Edited:
Zach D
Employee Rachael H
Written by:
Rachael H
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Matthew E
Updated by:
Matthew E
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924