Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket - Red

See what our Experts say about this Roadmaster Tow Bar Wiring

• LED Bulb & Socket Tow Bar Wiring Compatibility With 2020 Ram 2500
  When wiring in the Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket - Red Item # RM-152-LED-7 you'll want to place the bulbs in the red portion of the tail lights. Without seeing your tail light assembly fully taken apart to know where you'll have enough clearance in the red portion of the lights it's hard to say a specific spot will work. The LED bulb is going to stick into the light assembly 2" so as long as you have that amount of space it should be fine.
  view full answer...
• Diode lighting Kit Needed For Flat Towing A 2020 Jeep Gladiator With LED Lights
  Since you have LED tail lights the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord Item # RM-152-98146-7 will not work. Instead you'll need the Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket - Red Item # RM-152-LED-7.
  view full answer...
• Tow Bar Wiring Kit for 2019 Ford F-250 King Ranch Edition with LEDs Around Tail Lights
  I did take a look at the tail lights that come on the Ford F-250 King Ranch edition and I can see what you're referring to with the LED lights. When installing the Roadmaster Tail Light Wiring Kit # RM-152-LED-7 you need enough space to drill a 1" diameter hole in each of the tail light housings. If you don't have the room inside the tail light housing because of additional LED lights around the lenses, you may need to switch from a bulb and socket kit to a diode kit like the # RM-15267....
  view full answer...
• Looking For A Tail Light Kit With White Bulbs
  The Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket - Red # RM-152-LED-7 does not come with white LED bulbs and only red replacement LEDs are offered for it. We do have the Roadmaster Tail Light Wiring Kit with Bulbs # RM-155. The bulbs are white but not LEDs.
  view full answer...
• Recommended Flat-Tow Wiring Harness for a 2018 GMC Sierra 2500
  I recommend the Roadmaster Tail Light Wiring Kit part # RM-152-LED-7 for a 2018 GMC Sierra 2500 which is an all inclusive kit that comes with everything you need. The bulb/socket assembly will install inside the tail light housing so you don't have to splice into the vehicle's wire and then the bonded wiring lets you runs the wires up to the front of the vehicle to the trailer connector. There won't be an issue with the dual battery setup when using the Roadmaster Tail Light Wiring Kit....
  view full answer...
• Best Supplemental Braking System for Motorhome with Air Brakes Towing a Ram 1500
  I suggest the Demco Air Force One Supplemental Braking System, # SM99243. This will provide a fully proportional braking system that never needs to be removed from your truck. The actuator will install out of sight and will automatically function when RV and towed truck are connected. I have attached a review video below. If you need the other items, tow bar, base plate, etc. for flat towing your 2017 Ram 1500 I suggest the following: Base Plate, # DM9517335. This is a confirmed...
  view full answer...
• Recommended Flat-Towing Wiring Harness for a 2022 Ford Bronco Badlands
  I would be happy to help you find a wiring harness for your Ford Bronco Badlands but I recommend going with the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 over both of your options. This diode kit allows you to use your Bronco's tail lights and wiring system while preventing feedback from your RV. The install isn't too complicated, but you will need to cut and splice some wires to connect the diodes and wiring to the 6-pole socket. I was able to verify this...
  view full answer...
• Wiring Options for Flat Towing a 2006 Mini Cooper
  We actually have a decent amount of wiring kits that you can install on your 2006 Mini Cooper to flat tow it. If you plan on flat towing it frequently then installing a tail light wiring kit like the Roadmaster # RM-155 which uses a 4-Way to the motorhome or the Roadmaster # RM-152-LED-7 which uses a 7-Way to your motorhome is what I recommend using. After the initial installation all you'll have to do is plug in the wiring from the front of your Mini Cooper to the back of your motorhome. If...
  view full answer...
• Recommended Flat Towing System for 2012 Scion xD
  For your 2012 Scion XD, the Blue Ox Base Plate Kit - Removable Arms # BX3778 is a confirmed fit that will require some trimming of the fascia. I've attached the installation instructions to assist. The Blue Ox Alpha 2 Tow Bar - Motorhome Mount - 6,500 lbs # BX7380 will be a great fit for your vehicle and these base plates. This comes with the safety cables you need. For your wiring, I recommend the Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket -...
  view full answer...
• Setup Recommendations for Flat-Towing a 2008 Ford Explorer Sport Trac
  I went ahead and looked up the owner's manual for your 2008 Ford Explorer Sport Trac and I confirmed with Ford that you can flat-tow your vehicle behind your motorhome whether you have a rear-wheel drive or a four-wheel drive model. However, it is always important to consult with the owner's manual to make sure that you abide by all other flat-towing guidelines put forward by the manufacturer. The manual discusses extra products you need for both drivetrains that are only available through...
  view full answer...
• What Parts do I Need to Flat-Tow My 2018 Chevy Equinox?
  In order to flat-tow your your 2018 Chevy Equinox, you will need base plates, a tow bar, a tow braking system, and vehicle tow wiring. It is important to note that your owner's manual does not recommend flat-towing with the 2.0L I4 Gasoline Engine - Turbocharged model. Here's a setup of the following parts you need: - etrailer Invisible Base Plate Kit - Removable Arms # e98965 (will work with all engine models) - Roadmaster Falcon - Motorhome Mount # RM-522 - Adapter for Roadmaster Tow...
  view full answer...
• Parts Needed to Flat Tow 2004 PT Cruiser Behind Motorhome
  According to Blue Ox, the # BX1956 base plate kit you'd looked at is compatible with turbocharged models of the 2004 Chrysler PT Cruiser. For a tow bar, the Blue Ox Alpha 2, part # BX7380 would be an excellent choice. The tow bar is non binding, so it won't lock up when you're trying to unhook the vehicle from the tow bar. The Alpha 2 is also self centering, which means you won't have to have the vehicle perfectly lined up behind the motorhome in order to hook up. Safety cables are included. To...
  view full answer...
• How To Flat Tow 2006 Mini S Convertible With Standard Transmission
  You asked about Blue Ox products, but for your Mini the parts were not compatible to your tow vehicle. To flat tow your 2006 Mini Cooper Convertible S model (with standard transmission) you will first need Roadmaster # 521876-1 base plates which are hidden well and have easy to use twist-lock mechanisms. Next you will need a compatible tow bar. I strongly recommend a non-binding tow bar because with it you will not need to have the vehicle and motorhome perfectly straight and level to...
  view full answer...
• Instructions And Complete Parts List To Flat Tow A 1992 Jeep Wrangler YJ
  Yes, you can flat tow your 1992 Jeep Wrangler YJ regardless of the model or transmission option. Start by bringing your Wrangler to a complete stop and stop on a level surface behind your tow vehicle. Since you mentioned it is an automatic, you'll want to do the following to correctly prep your Wrangler for flat towing: -Begin by depressing the bake pedal and switch the transmission into neutral. -Next, turn the engine off, and switch the transfer case into neutral, and restart the...
  view full answer...
• Recommended Flat Towing Components For A 2010 Mini Cooper S
  While there isn't a complete all-in-one kit I can still list all the parts you'll need to flat tow your 2010 Mini Cooper S: Tow Bar: etrailer SD Non-Binding Tow Bar # e44ZR. This tow bar is compatible with the baseplates you'll need and comes with safety cables included so that you don't have to purchase them separately. Baseplate: Roadmaster EZ Base Plate Kit # 521877-1 (note: not compatible with Sport suspension or John Cooper Works). Tow Bar Wiring Kit: Roadmaster Tail Light Wiring...
  view full answer...
• What Parts do I Need to Flat-Tow My 2018 Chevy Equinox?
  We definitely have the parts and some installer options for you. For the parts, you need a base plate, a tow bar, safety cables, a tow braking system, and vehicle tow wiring. I recommend the following setup: - etrailer Invisible Base Plate Kit - Removable Arms # e98965 - Blue Ox Ascent Non-Binding Tow Bar - Motorhome Mount - 2" Hitch # BX4370 (comes with safety cables) - Brake Buddy Select 3 Portable Supplemental Braking System # HM39524 - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil...
  view full answer...
  
• Flat Towing Base Plates for 1995 Volkswagen Golf Mk III
  For your 1995 Volkswagen Golf MkIII, you'd need the Roadmaster # 1217-2, which is a confirmed fit. Your Golf will be flat towable as long as it has a manual transmission. In addition to the base plates, you'll also need a tow bar like the etrailer # e44ZR which includes the safety cables, a taillight wiring kit like # RM-152-LED-7 and a supplemental braking system like # HM39494.
  view full answer...
• Recommended Flat Tow Setup For A 2022 Chevy Spark
  I went ahead and checked the owner's manual for the 2022 Chevrolet Spark, and as long as you don't have an automatic transmission version, then you'll have no issues flat towing your vehicle. If you're planning on getting the automatic transmission version of the Spark, then you'd need to use a towing dolly. If this is the version you plan on getting, the Demco Kar Kaddy SS Tow Dolly with Disc Brakes # DM9713045 is a great option. This tow dolly has a maximum towing capacity of 4,800-lbs,...
  view full answer...
• What Flat Towing Package Would Work For MY 2019 Chevrolet Equinox
  When it comes to flat towing your 2019 Equinox there are a few items that will be similar to the items you saw already. The main difference would be the RoadMaster Baseplate # RM-523193-5. This baseplate is a direct fit for you vehicle. It is the direct connect style. From the baseplate any RoadMaster tow bar would work for you. I recommend The Falcon 2 # RM-520. The Falcon 2 is rated for 6000 pounds and will connect directly to your baseplate. For the wiring of the vehicle I recommend...
  view full answer...
• Does Grille Need to be Trimmed to Mount Base Plate in 2008 Mini Cooper S Hardtop
  While it doesn't need to be drilled, the lower front grille of your 2008 Mini Cooper S Hardtop does need to be trimmed in order to install the base plates that fit (unless you have the Sport suspension), which are the following part number: - Roadmaster EZ Base Plate Kit # 521877-1 This is necessary in order to allow the arms to protrude so the tow bar has a place to attach. Along with the base plates, the rest of the flat tow set up for your '08 Mini Cooper S Hardtop consists of the...
  view full answer...
  
• Complete Flat Towing Setup For A 2020 Chevrolet Sonic
  Sure thing! For your 2020 Chevrolet Sonic Hatchback, you're going to need: -A base plate kit, Blue Ox Base Plate Kit # BX1703, -A tow bar, the Curt Rambler Steel Tow Bar for Curt and Blue Ox Base Plates # C26FR, -A wiring kit, Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector # RM-152-LED-7 with the fuse bypass # RM76512, # RM76511 & # RM76511. Those 3 fuse bypasses are only for models with keyless entry, if your Sonic does not have keyless entry then you only need one...
  view full answer...
  
• Parts Needed to Flat Tow 2015 Manual Transmission Mitsubishi Mirage Behind Motorhome
  A 2015 Mitsubishi Mirage with a manual transmission can indeed be flat towed with the transmission in neutral. For starters, you'll need a base plate, # BX2002 from Blue Ox. For a tow bar, use the Blue Ox Alpha2, part # BX7380. To wire the taillights, I'd recommend a bulb and socket kit like # RM-152-LED-7 which allows the wiring to remain independent of the vehicles taillight wiring system. It's like using a magnetic mounted tow light set that you'll only need to install once, without...
  view full answer...
• Complete Flat Towing Setup For A 2005 Mini Cooper
  Yes! Along with the Roadmaster Tow Bar Quick Disconnect Kit # RM-201, you will have no issues using the Roadmaster Tracker Tow Bar # RM-020 with the Roadmaster EZ Base Plate Kit # 521876-1 on your 2005 Mini Cooper. If you're interested in a complete flat towing setup you're also going to need: -A braking system like the Brake Buddy Select 3 Portable Supplemental Braking System # HM39524. -A wiring kit like the Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector # RM-152-LED-7. -Safety...
  view full answer...
• Parts Needed to Flat Tow 2020 Chevy Spart
  According to my research, manual transmission equipped models of the 2020 Chevy Spark are indeed capable of being flat towed. Automatic transmission equipped vehicles would need to be dolly towed, using a tow dolly like # RM-2050-1. If your Spark has a manual transmission, you'd need a tow bar like the Roadmaster # RM-522 Falcon 2 All Terrain Tow Bar that you looked at, a base plate kit, safety cables, a wiring harness to connect to the motorhome, a supplemental braking system and possible...
  view full answer...

Do you have a question about this Tow Bar Wiring?