1. Tow Bar Braking Systems
  2. Jeep
  3. TJ
  4. 2002
  5. Brake Buddy
FITS 2002 Jeep TJ
Brake Buddy Stealth Supplemental Braking System - Proportional

Brake Buddy Stealth Supplemental Braking System - Proportional

Item # HM39530
lowest price pledge
Retail:$1,338.76
Our Price: $896.30
You Save: $442.46
Tow Bar Braking Systems
Confirmed to Fit
2002 Jeep TJ

All models

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 15 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Product Expert Mike S

Is this right for you? Product Expert Mike S says:

Yes, if you:

  • Don’t have time to waste setting up a portable system before every trip
  • Are comfortable towing a trailer with a brake controller and want that same design for a braking system
  • Sometimes tow a boat trailer with your RV instead of flat towing your car

No, if you:

  • Are typically a DIYer, but don't want to have to deal with a more complicated install
  • Upgrade your towed car every few years
  • Have limited space in your RV cab to mount a brake controller
The best technical support and full tow bar braking systems installation instructions. Lowest price TJ tow bar braking systems guarantee and expert service. Jeep TJ, 2002 tow bar braking systems by Brake Buddy are available from etrailer.com. For expert service call 800-298-1624 to order your Brake Buddy Stealth Supplemental Braking System - Proportional part number HM39530, or order online at etrailer.com.
  • All Info
  • Reviews (23)
  • Q & A (86)
  • Photos
  • Why etrailer?

2002 Jeep TJ - Brake Buddy Stealth Supplemental Braking System - Proportional

  • Brake Systems
  • Proportional System
  • Hydraulic Brakes
  • Air Brakes
  • Air Over Hydraulic Brakes
  • Fixed System
  • Brake Buddy
  • Power Assist Brake Compatible

Get fully proportional braking with a system that never has to be removed, replaced, or reset. Actuator installs out of sight and remains virtually invisible when your car isn't being towed. Controller also works as a trailer brake controller.


Features:

  • Supplemental braking system applies towed vehicle's brakes in proportion to braking action of RV
    • Towed car's brakes are activated at the same time and with the same intensity as those in your motorhome
  • Sensitivity control lets you adjust rate of responsiveness of braking sensor
    • Low sensitivity requires intense stopping action from RV to activate towed car's brakes
    • High sensitivity allows towed car to respond to light braking action of RV
  • 1-Time setup - no need to remove, reposition, or reset system
    • Main unit installs in an out-of-the-way spot, such as in the trunk
    • System automatically functions when RV and towed car are connected
  • Controller with digital display mounts in your RV's cab
    • Lets you easily adjust braking sensitivity
    • Shows braking action and breakaway status
    • Doubles as a proportional trailer brake controller
  • Built-in battery protection keeps your towed vehicle's battery charged as you tow
    • Main unit connects directly to your towed car's battery
  • Vacuum pump restores your car's vacuum after each braking event
    • Puts less strain on your towed car's brakes
    • Ensures compatibility with hybrids and other continuous power-assist vehicles
  • Low-profile, 7-way flat connector offers simple hookup and a clean look
    • Built-in breakaway automatically activates towed vehicle's brakes if plug disconnects
    • 4-Way vehicle-end plug connects to 4-way of tail light wiring kit (sold separately) on towed car
  • Flex-Coil adapter lets you easily hook up your towed car to your RV
    • Specially designed 7-flat connector plugs into the port installed at the front of your car
    • 7-Way, blade-style connector plugs into your RV
      • Nite-Glow connector lights up to confirm connection between your RV and vehicle
    • Coiled cord won't drag on the ground


Specs:

  • Actuator box dimensions: 14-1/2" long x 5-3/8" wide x 3-3/8" tall
  • Controller dimensions: 3" wide x 5" long x 1-1/4" tall
  • Power draw: 5 amps
  • 5-Year warranty


A supplemental braking system is crucial when you tow a car or truck behind your RV. Without it, the weight of the towed car can create a safety hazard, strain your RV's brakes, or affect your RV's warranty. Most states require a supplemental braking system.


Automatic, Proportional Braking

Instead of being a time-delayed system, which brakes at a preset level, the Brake Buddy Stealth is a proportional system that delivers consistent braking. The Stealth will activate the brakes in your towed car with an intensity that matches the braking action of your RV. The result is smooth, even braking across your entire flat-tow setup.


Brake System Controller

The Brake Buddy Stealth controller mounts in the cab of your RV and functions like a proportional trailer brake controller. This means that the braking intensity of the system is based on your RV's deceleration. So, if you slam on the brakes in your RV, your towed car's brakes will activate with that same harsh intensity. And if you gradually slow down as you approach a red light, your car will steadily brake in the same light manner.


Hopkins Brake Buddy Stealth Controller Functions

The above diagram shows the controls and components of the Stealth controller unit.

A. Mode indicator

B. Sensitivity adjustment button

C. Power level control buttons (trailer braking mode only)

D. Digital display

E. Test button (supplemental braking system mode) or manual override (trailer braking mode)

F. Mode control button

G. Mounting bracket slots


Internal Inertia Sensor

As long as the controller sits level on a horizontal plane and is pointed in the direction of travel, its internal inertia sensor will sense how your RV brakes and respond to the deceleration of your RV. It signals the actuator box to move the cable that attaches to your towed car's brake pedal so that the car's brakes activate with an intensity that matches your RV's braking.


Adjustable Sensitivity Settings

You can fine-tune the power output on the Stealth by adjusting the sensitivity of the internal sensor. Set the sensitivity low and the Stealth will only respond when you step down hard on your RV's brake pedal. Set the sensitivity high and it will respond even when you lightly tap your RV's brakes.


Use the adjustment buttons on the top of the controller to set your preferred level of braking intensity. Level 1 offers the least amount of sensitivity, making it ideal for lighter loads. Level 7, the highest level, provides the harshest braking. The heavier your load, the higher you will want to set the brake sensitivity.


Easy-to-Read Digital Display

On the front of the controller unit, there's a digital display that is designed to keep you informed about your towed car's braking action. This screen shows the braking sensitivity level, power level, and any error codes that might appear as you tow, such as a short circuit.


Mount Controller in Your RV's Cab

Mount the controller anywhere in your RV's cab that is within easy reach. It's recommended that the controller be mounted at an angle between -20 degrees and 70 degrees. Note: The Stealth controller must be mounted on a level horizontal (side-to-side) plane and must be lined up with the direction of travel for the internal sensor to function properly.


To install the controller, you will have to splice into your RV's wiring and connect the unit to your battery, stop light switch, and 7-way trailer connector. To do this, you will need some additional wiring and either a 20-amp circuit breaker or an in-line fuse. If you don't already have a 7-way trailer connector at the rear of your RV, you can use etrailer.com's exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately).


Trailer Brake Controller Functionality

The Stealth controller doesn't just work when you're towing a car. It also acts as a proportional trailer brake controller for when you're towing a trailer. Just press the mode control button on the side of the controller to switch from supplemental braking system mode to trailer braking mode. Then hook up your trailer to your RV. The Stealth controller works with trailers that have up to 4 axles (8 brake assemblies) and electric brakes.


When in trailer braking mode, the Stealth controller allows for the same smooth, proportional braking that you'll receive when you're towing your car. Slamming on your RV's brakes will signal your trailer to brake just as intensely. Steadily slowing down before a red light will signal your trailer's brakes to react just as gradually. Just set the initial power level, select your sensitivity setting, and you're ready to go.


Low-Profile, Semi-Permanent Installation

Some proportional braking systems are bulky, and they must be repositioned and reset before each use. And if you want to drive your towed vehicle, you need to remove the unit and find a place to stow it. With the Brake Buddy Stealth, a 1-time setup is all that's required, making it faster than ever to get your car ready to tow.


Actuator Box and Cable Pulley

Brake Buddy Stealth Actuator Box

The main actuator box installs in an out-of-the-way location in your vehicle, like in the trunk. The box's wiring connects to the 7-way flat connector that installs on the front of your towed vehicle. The black cable runs to the cable pulley system that installs on your car's brake pedal, so that the brakes can activate properly.


Brake Buddy Stealth Cable Pulley Attached to Brake Pedal

Because the installation is semi-permanent, you don't need to reactivate any parts when you're getting ready to tow, nor do you need to remove anything when you're done towing. The Brake Buddy Stealth can stay in your vehicle year-round. Once you're ready to tow again, just plug your towed car into your RV and the system will automatically begin functioning.


Exclusive Connector and Adapter Cord

Hopkins Brake Buddy Stealth 7-Way Flat Connector

The Brake Buddy Stealth uses a novel 7-way flat connector that mounts at the front of your towed vehicle. Unlike standard 7-way connectors, this low-profile socket stays out of sight when you're not towing. A dust cover is included to cover the connector when your vehicle is not connected to your RV.


Hopkins Brake Buddy Stealth 7-Way Flat Plug

All of the electrical functions that you need are built into this single connector.


Hopkins Brake Buddy Stealth Wiring Diagram

The diagram above shows how the 7-way flat installs.


Wire 1 connects to your vehicle's battery.

Wire 2 connects to the vacuum pump included with the Stealth.

Wires 3, 4, and 6 connect to the corresponding, color-coded wires on the Stealth's main unit. These wires have quick-plug ends for simple plug-and-play connecting.

Wire 5 is the ground wire. (Note: A ground wire extends out from the main unit as well. Both the 7-way flat and main Stealth unit must be grounded.)


Typically when you wire your towed car to get the signal lights required for towing, you will run a 4-way to the front of the car. This 4-way then has to be connected to your RV with a separate loop every time you tow. But with the Stealth, a wiring harness with a 4-way flat, vehicle-end plug is built into the back of the included 7-flat connector so that you can just plug in your towed car's tail light wiring kit.


Brake Buddy Stealth Coiled Cord with 7-Way Flat and 7-Way RV Style Plugs

The Brake Buddy Stealth system includes a coiled adapter cord that connects to your RV's 7-way, blade-style socket on one end and to the 7-way flat socket that installs on your towed car at the other end. The RV-style plug has Nite-Glow technology, so it will illuminate when connected to confirm that the plug is receiving power from your RV.


The adapter cord also comes with a built-in breakaway cable. If the cord comes unplugged from your RV while you're towing, the Stealth system will enter breakaway mode and your towed vehicle's brakes will activate. Note: The dust cover must be inserted into the connector when the car is not being towed to prevent the Stealth from going into breakaway mode.


Vacuum Pump

Brake Buddy Vacuum Pump

For many cars, trucks, and SUVs, the vacuum-assist function of their brakes stops working when the engine is off. As a result, many supplemental braking systems have to apply an extreme amount of force to activate the towed vehicle's brakes when it's being flat towed. The Brake Buddy Stealth's vacuum pump is designed to restore the vacuum force in your towed car's brakes each time the brakes are activated. No need to have a system that exerts a large amount of force to bring your towed vehicle to a stop.


Install the included vacuum pump under your towed car's hood to ensure that its vacuum-assist brakes operate correctly while the car is being towed.


Note: If you have a vehicle that has continuous power-assist brakes, you do not need to install the vacuum pump.



39530 Break Buddy Stealth Fixed Proportional Towed Jeep TJ Braking System by Hopkins

Installation Details HM39530 Installation instructions

California residents: click here



Customer Reviews

Brake Buddy Stealth Supplemental Braking System - Proportional - HM39530

Average Customer Rating:  4.3 out of 5 stars   (23 Customer Reviews)

Get fully proportional braking with a system that never has to be removed, replaced, or reset. Actuator installs out of sight and remains virtually invisible when your car isn't being towed. Controller also works as a trailer brake controller.

- HM39530
by:

I choose the Brake Buddy Stealth for my 2021 Jeep Wrangler because I wanted a “stay in place” brake system and felt it would be a clean looking installation. I finished the toad side of the installation today and thought I’d leave some notes on what turned out to be a bigger project than I’d anticipated. Again, this is my experience on the 2021 Jeep Wrangler 2-door. Your experience on other vehicles may vary. I started this install after installing a Demco Tabless Base Plate. Right out of the blocks, there’s really no convenient location to mount the cable connector to the Demco baseplate. I chose to mount it to under side of the bumper on the driver’s side. To provide clearance and a route for the wires, I had to cut a notch into the plastic air dam. I used one of the already screw screw holes and used self tapping screws in the other three locations. For added strength I epoxied the connector to the bumper as well. Since the bumper would be unremovable if the connector were hardwired, I added a waterproof connector. The kit is stingy with wire lengths, so I substituted my own wire. The Stealth unit itself i mounted beneath the driver’s seat. Don’t be fooled into believing there is clearance when testing with the driver’s seat positioned for rear seat access. Once the seat is returned to normal operation it lowers a bit and the box keeps the seat from being move forehand aft. I solved the problem by installing 5/8” thick nylon washers under the rear end of the seat slides. I also cut away a bit of the carpet under the front, inboard corner of the box. You will need to remove the driver’s seat in order to attach the front screws of the box. Be sure to disconnect and isolate the neutral battery terminals to prevent inadvertent air bag discharge. After removing the interior trim from the A-pillar, the door sill, and the driver side foot well, The wiring and cable tucked nicely away along with the OEM wiring and wiring for my taillights. I mounted the pulley horizontally behind the brake pedal. Installing the vacuum pump was my biggest worry and challenge. Instructions are to zip tie it “somewhere”. That seemed pretty casual for a safety system. I chose, instead, to fabricate an aluminum bracket that attaches to the lip of the engine compartment and to the wheel well (this latter attachment point is necessary to keep the pump from vibrating). Finally, the kit comes with 3/8” fittings to tap into the brake booster vacuum lines. The Jeep, however, uses 8mm nylon tubing. Brake Buddy, via etrailer.com, stated that the tubing would stretch and all would be good. Again, this felt casual for a safety system. Instead, I purchased an 8mm check valve and a 8-6-8mm barbed tee through Another online retailer to do the job right. I had to heat the Jeep tubing to fit even the 8mm tee, so the is no way the larger 3/8” fittings would have worked. See photo of my finished vacuum line installation. Bottom line, it was a POA install, but looks great. Hopefully it will stop the Jeep when towing. I’ll find out soon. :D



- HM39530
by:

The design concept is great but I have had a couple problems. I have not yet contacted the manufacturer. It has acted like a breakaway situation after disconnecting the cable even though I put the cap on the jack i.e. the brake pedal stays active. Sometimes when driving the toad it loses vacuum assist. I tried putting in a check valve in the line from the vacuum pump but that did not help. I disconnected that vacuum line and capped the tee and did not experience loss of vacuum assist. I reconnected the line to the vacuum pump had trouble twice but after a fair amount of driving, did not have trouble again. Mostly the problem occurs when first putting the car in gear after starting the engine. TIP FOR ALL TOAD TOWERS: I mounted a bright red LED strip to the front of the toad and wired it to the actual brake light switch in the toad. The light allows me to use the RV's backup camera to confirm whether the brake pedal is getting activated and released properly. Unfortunately, I have not had a chance to road test that. (Use a switch or quick disconnect so that it can be disabled for regular driving.)



- HM39530
by:

This system, when sorted, works pretty well. It's also extremely easy to hook up and go, requiring none of the traditional nonsense associated with braking systems. Their all-in-one connector is excellent, and really works well. That said, it's been a long road (over a month) to get it installed and at a point where it safely stops the towed car. June 9: I ordered the Brake Buddy Stealth kit for my 2017 GMC Acadia V6. July 5: I set about installing the kit, and realized that I was missing the harness and umbilical from what appeared to be an open box item. Called Hopkins tech support, and they stepped up and sent replacement parts for what was probably an unscrupulous customer's swindle. Kudos! July 12: Install attempt round two. This time the install is successful, however, the controller that mounts in the towed vehicle is acting like it's fried. I called tech support and again, Hopkins stepped up and sent a replacement controller. July 18: Receive controller and install. Appears to have fixed the problem. But now, the brake pedal is only pulling in a quarter of an inch when testing breakaway or trying to actuate it with the test button on the controller. I called tech support again and determined it's a bad main unit. I ordered a whole new kit, figuring I'll get good parts from one kit and send back the bad parts. July 21: New kit arrived. I replaced the main unit and it changed nothing. Start advanced troubleshooting. Check voltages at the main unit under varying conditions - everything checks out. Detach the cable from the brake pedal and determine that the thing actually does stroke about four inches. Turns out the overload protection in the main unit is functioning as intended because too much effort is required to move the pedal. I test the vacuum pump and it's working as designed. I then moved the cable attachment point to the very bottom of the brake pedal for leverage. This isn't what was shown in the instructions, but I was able to make it work and it did help - brake now moved about 2 inches. Then I tried testing it with the towed car idling (to provide good vacuum) and found that the pedal would move about 4 inches before the protection overload would stop it. The conclusion - not enough vacuum. I tested the car's booster line with a vacuum gauge while running, and noted that it was pulling 25 inches of mercury (inhg). Tested the vacuum with the pump doing the work (engine off), and found that it would kick on at 10inhg and shut off at 15inhg. So the reason the system only works when the car is running is because the supplied vacuum pump is inadequate, providing ~10 less inches of vacuum than the car needs for proper booster operation. Then I did some research on the Dorman vacuum pump in the kit. It's used in Ford trucks to provide accessory vacuum when starting the car for stuff like the AC controls. It's really not intended for something as significant and critical as braking. In any event, I took it apart and found that I had some wiggle room on the thresholds. I adjusted the contacts in the vacuum switch, and got it to the point where it would kick on at 15inhg and run it up to about 20inhg. Reinstalled the pump and took the car for a tow test, and it worked pretty well for well spaced braking events. However, the vacuum pump ran every time I pressed the brake, and did so for 90-120 seconds. That wasn't going to cut it for multiple braking events within a one to two minute period (think traffic). Also, it sounded like it was working really hard to build 20inhg, and I suspected that it wouldn't be lasting very long. If it were to fail, I wouldn't have towed car braking, and that's no good since I'm taking my wife and four little kids on a cross country trip next month. So rather than start over, I set about fixing the vacuum deficit at the beginning of August. For around a hundred bucks, I was able to get a Volvo brake booster vacuum pump and a multicomp vacuum switch (search [online vendor]). I made a mounting plate and used these two pieces with a relay to power the pump directly from the battery (picture attached). The result is that I can maintain vacuum between 19-23 inches, and the system now seems to work great. This vacuum pump is far superior, and only runs for about ten seconds between braking events. Despite the fact that I'm good to go now, the vacuum pump included with the kit is sub-par and is now sitting in my parts bin. I contacted Hopkins with all of this information, and while they were responsive and helpful throughout this adventure, their engineers' final determination was that the provided vacuum pump should get the job done. That may be true for a Honda Civic, but in practice (and in fact) is was not adequate for my Acadia. In other words, unless you're really technically competent, I'd consider other options.



- HM39530
by:

Could not get it to work, finally, after several phone calls, the gentleman, joking, said maybe the unit that goes in the RV, might be bad. It was, then they sent me another one, which took a little time, I got it working. The dust cover should be changed, so it’s really obvious which way it goes on. I did not get it on the right way and it locked up my tow vehicle. Had to loosen the cable on the brake to move it. Taking out the fuse did not make a difference. Thanks



- HM39530
by:

I gave each and every one of the items I purchased a 5star rating because they each have contributed greatly to my confidence and sense of security about full-time RVing in my Class C rv towing my little car behind. Each product has been well made and thought out and the service from etrailer has been great....from price to shipping and packaging. I couldn't be more pleased with everything. Job well done. Thank you.



- HM39530
by:

Works well once installed and "debugged". Had to install on/off switches in both the motorhome and tow vehicle because the self shut off never worked and it would run down my batteries. Box unit is pretty large so make good measurements to ensure it will fit where you want it.



- HM39530
by:
2007 Jeep Wrangler

Install was fairly easy. I did call support with a couple questions and they were very helpful.



- HM39530
by:

This system, when sorted, works pretty well. It's also extremely easy to hook up and go, requiring none of the traditional nonsense associated with braking systems. Their all-in-one connector is excellent, and really works well. That said, it's been a long road (over a month) to get it installed and at a point where it safely stops the towed car. June 9: I ordered the Brake Buddy Stealth kit from eTrailer for my 2017 GMC Acadia V6. July 5: I set about installing the kit, and realized that I was missing the harness and umbilical from what appeared to be an open box item. eTrailer stepped up and sent replacement parts for what was probably an unscrupulous customer's swindle. Kudos! July 12: Install attempt round two. This time the install is successful, however, the controller that mounts in the towed vehicle is acting like it's fried. I called tech support and again, eTrailer stepped up and sent a replacement controller. July 18: Receive controller and install. Appears to have fixed the problem. But now, the brake pedal is only pulling in a quarter of an inch when testing breakaway or trying to actuate it with the test button on the controller. I called tech support again and determined it's a bad main unit. I ordered a whole new kit from eTrailer next day air. I figure I'll get good parts from one kit and send back the bad parts. July 21: New kit arrived. I replaced the main unit and it changed nothing. Start advanced troubleshooting. Check voltages at the main unit under varying conditions - everything checks out. Detach the cable from the brake pedal and determine that the thing actually does stroke about four inches. Turns out the overload protection in the main unit is functioning as intended because too much effort is required to move the pedal. I test the vacuum pump and it's working as designed. I then moved the cable attachment point to the very bottom of the brake pedal for leverage. This isn't what was shown in the instructions, but I was able to make it work and it did help - brake now moved about 2 inches. Then I tried testing it with the towed car idling (to provide good vacuum) and found that the pedal would move about 4 inches before the protection overload would stop it. The conclusion - not enough vacuum. I tested the car's booster line with a vacuum gauge while running, and noted that it was pulling 25 inches of mercury (inhg). Tested the vacuum with the pump doing the work (engine off), and found that it would kick on at 10inhg and shut off at 15inhg. So the reason the system only works when the car is running is because the supplied vacuum pump is inadequate, providing ~10 less inches of vacuum than the car needs for proper booster operation. Then I did some research on the Dorman vacuum pump in the kit. It's used in Ford trucks to provide accessory vacuum when starting the car for stuff like the AC controls. It's really not intended for something as significant and critical as braking. In any event, I took it apart and found that I had some wiggle room on the thresholds. I adjusted the contacts in the vacuum switch, and got it to the point where it would kick on at 15inhg and run it up to about 20inhg. Reinstalled the pump and took the car for a tow test, and it worked pretty well for well spaced braking events. However, the vacuum pump ran every time I pressed the brake, and did so for 90-120 seconds. That wasn't going to cut it for multiple braking events within a one to two minute period (think traffic). Also, it sounded like it was working really hard to build 20inhg, and I suspected that it wouldn't be lasting very long. If it were to fail, I wouldn't have towed car braking, and that's no good since I'm taking my wife and four little kids on a cross country trip next month. So rather than start over, I set about fixing the vacuum deficit. For around a hundred bucks, I was able to get a Volvo brake booster vacuum pump and a multicomp vacuum switch (search Amazon). I made a mounting plate and used these two pieces with a relay to power the pump directly from the battery (picture attached). The result is that I can maintain vacuum between 19-23 inches, and the system now seems to work great. This vacuum pump is far superior, and only runs for about ten seconds between braking events. Despite the fact that I'm good to go now, I feel like the vacuum pump included with the kit is sub-par. I contacted Hopkins with all of this information, and while responsive and helpful, their final determination from "the engineers" was that the provided vacuum pump should get the job done. That may be true for a Honda Civic, but in practice (and in fact) is was not adequate for my Acadia. In other words, unless you're really technically competent, I'd consider other options.



- HM39530
by:

Every one was very helpful and got my order to very fast, thanks for everything.



- HM39530
by:

Fairly easy to install, just follow instructions and videos and you get there. Works perfect!



- HM39530
by:

Working great.



- HM39530
by:

Everything was received sooner than expected. These people are great to work with! They are all knowledgeable with the products they sell!



- HM39530
by:

I'm only giving this three stars, because of the installation issues. First the main Stealth box will not fit under the front seat as shown in the video. The only location is the floor under the rear seat. There are no manufactured through holes in the firewall. A hole must be drilled and there is not much space to work with. Additionally, the same applies to the pully. Be careful here because you will have limited space to insert the cable without kinking it. The brake pedal arm is wider than the bolts supplied. You will need 1 3/5 inch minimum. The arm pulls at an angle which makes pully alignment tricky. Sorry no pictures got so frustrated I was focused on getting it done.



- HM39530
by:



- HM39530
by:
2021 Jeep Grand Cherokee



- HM39530
by:



- HM39530
by:



- HM39530
by:



- HM39530
by:



- HM39530
by:



- HM39530
by:



- HM39530
by:



- HM39530
by:
2018 Jeep JL Wrangler Unlimited


27
27

Ask the Experts about this Brake Buddy Tow Bar Braking Systems

  • Is There a Plug-In Harness for the Brake Buddy Stealth Braking System On a 2017 Ford F-53 Chassis
    Yes, there is a plug under the dash on a 2017 Ford F-53 Chassis. Therefore, if you are using the Brake Buddy Stealth Supplemental Braking System part # HM39530 you can get the Hopkins Plug-in Simple Brake Wiring Adapter part # HM47715 for a plug and play installation on the tow vehicle side that is. Please keep in mind, the brake controller that comes with the Brake Buddy Stealth Supplemental Braking System has blunt cut wires so you would have to install the Universal Wiring Adapter...
    view full answer...
  • Flat Towing Recommendations For A 2020 Jeep Wrangler JL Unlimited Rubicon
    For tow bar wiring I recommend the Roadmaster Universal Hy-Power Diode Wiring Kit Item # RM-154. It's a one time setup that splices into your vehicles lighting so you don't have to carry around the magnetic lights and run them every time you want to tow. For braking I recommend the Brake Buddy Stealth Supplemental Braking System - Proportional Item # HM39530. This braking system is a one time setup as well and also comes with a battery charger to keep your battery maintained while towing....
    view full answer...
  • Where Should Power Source for Brake Buddy Stealth Connect to
    You should run the power of the Brake Buddy Stealth Supplemental Braking System # HM39530 to the battery like the instructions recommend so that it will always be powered regardless of what circuit you might deactivate.
    view full answer...
  • Is Brake Buddy Stealth HM39530 Current Version
    The version of the Brake Buddy Stealth part # HM39530 we offer is the most current version. What you'd receive has the easily removed plug.
    view full answer...
  • Do I Need Supplemental Braking for my 2003 Honda CR-V When Flat Towing
    The answer to your main question here is-yes. Most states and provinces require the use of a supplemental braking system when flat towing a vehicle like your 2003 Honda CR-V. A good cost effective system that will provide you with proportional braking for your dinghy is the Brake Buddy Stealth Supplemental Braking System - Proportional # HM39530. This is a permanently installed system, so it installs away from view and there's no setup needed each time you're looking to get on the road....
    view full answer...
  • Can Brake Buddy Stealth be Used with Brake Controller Installed in RV
    The Brake Buddy Stealth part # HM39530 can only work with the included brake controller. You'd have to install the controller that comes with this to use it with the Stealth and then use your current controller when towing a trailer.
    view full answer...
  • Dimensions Of Main Unit Of Brake Buddy Stealth Supplemental Braking System In 2020 Chevy Silverado
    The Brake Buddy Stealth Supplemental Braking System part # HM39530 is a nice supplemental braking choice for the 2020 Chevy Silverado. The main unit box measures 14"L X 5-3/8" W X 3-3/8" H. This should help give you an idea of where you would like to position it out of sight. The suggested mounting locations are under the seat or in the trunk. The controller is 3" W X 5" L X 1-1/4" H. The cable from the main unit to the brake pedal is 11-1/2 feet so you will not have any issues installing...
    view full answer...
    Image 1 for Image 2 for
  • How Long Will It Take to Install the Brake Buddy Stealth
    There really isn't a way for me to give you an accurate, down-to-the-minute guess as to how long it's going to take you to install the Brake Buddy Stealth Supplemental Braking # HM39530. However I can tell you that if you've got any degree of mechanical experience it shouldn't take you 12 hours to complete this installation. Someone with experience installing these should take roughly 6 hours, but I can see this taking 8 hours in some cases.
    view full answer...
  • Using Battery Charger Included With HM39530 Brake Buddy When Negative Battery Cable is Disconnected
    We've got a solution for you. You'll want to use a Deka Quick Disconnect Battery Terminal, part # DW05312. On the terminal end that remains on the battery once disconnected, you'll attach the ground wire for the charger using a # DW05705-1 ring terminal. This leaves the charger grounded once the negative battery terminal is disconnected. I've provided a photo showing where to place the ring terminal.
    view full answer...
    Image 1 for
  • Wiring Diagram For All In One Connector From Brake Buddy Stealth System
    One end of the umbilical cord that comes with the Brake Buddy Stealth Supplemental Braking System part # HM39530 is a 7-blade round connection that connects to motor home's 7-way plug. The other end is a 7-flat connector that plugs into the all-in-one connector on the Ford Ranger. I have attached a wiring diagram for the all in one connector for your reference.
    view full answer...
    Image 1 for
  • Will Brake Buddy Stealth Fit Vacuum Line of 2021 Jeep Wrangler
    Brake Buddy has confirmed that the Stealth part # HM39530 is a fit for your 2021 Jeep Wrangler and that the vacuum line will stretch adequately fit and perform fine. A difference of .06 of an inch would not be an issue. The hose would easily stretch to fit that.
    view full answer...
  • Parts Needed to Flat Tow 2018 Chevrolet Equinox Behind Motorhome
    According to the owner's manual, 1.5L gas and 1.6L Diesel engine and 1.6L Diesel AWD models can be successfully flat towed. I'd recommend beginning with a Blue Ox base plate, part # BX1730 which is compatible with your tow bar if the # BX88297 adapter is used. You'll also want safety cables like # RM-643 if you don't already have them. To join the motorhome's taillight wiring to that of the Equinox, I'd recommend the Roadamaster Diode kit, part # RM-152-98146-7. For a supplemental...
    view full answer...
  • Brake Buddy Stealth Supplemental Braking System 2020 Jeep Wrangler
    From what you describe I suggest the Brake Buddy Stealth Supplemental Braking System, # HM39530. This is a proportional brake control system. That applies the towed jeep's brakes when activated at the same time and with the same intensity as those in your tow vehicle. This is a 1-Time setup, no need to remove, reposition, or reset system as the main unit installs in an out-of-the-way spot and automatically functions when tow vehicle and Jeep are connected. This will have it's own brake...
    view full answer...
  • Brake Controller Adapter For A Ford F-53
    There is no specific harness for you 2012 F53 that works with the Brake Buddy Stealth Supplemental Braking System - Proportional Item # HM39530 however, the 2012 F53 does have a brake controller plug under the dash somewhere around the steering column. Since the stealth brake controller has open wires on the end you can use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford, Lincoln, Mercury Item # 3035-P. You would just cut the connector off that would typically...
    view full answer...
  • Replacement Kit for Plug Clip for BrakeBuddy Stealth
    I spoke with my contact at Hopkins and he told me that you'd need the Hopkins Stealth Connector Kit # HM39531 is what you need to replace the parts you mentioned on your Hopkins BrakeBuddy # HM39530.
    view full answer...
  • Does Vacuum Pump of Hopkins Stealth Kit Have to Install Near Brake Booster
    You'll need to install the vacuum pump of the Hopkins Stealth # HM39530 near the main brake booster hose to ensure it can work properly. Vacuum lines can get pretty complicated as at various part of the setup there might be a reducer installed inline that prevents full vacuum from getting somewhere so if you were to install the pump before on of those you'd have diminished braking performance of the Stealth.
    view full answer...
  • Is Battery Disconnect Needed With Blue Ox Patriot Braking System on 2012 Chevy Colorado
    The Roadmaster Automatic Battery Disconnect # RM-766 is actually not required when using the Brake Buddy Stealth Supplemental Braking System # HM39530 on your 2012 Chevy Colorado. All you need is the Stop Light Switch # RM-751442. I've added links to video reviews of both for you to check out.
    view full answer...
  • Attaching Break Buddy to Vacuum Lines of 2005 Jeep Liberty
    You would not need a second check valve. You'd just need to install the check valve of the Break Buddy # HM39530 in the main vacuum line before the Y-fitting that splits the lines off into two lines.
    view full answer...
    Image 1 for
  • Installing the Brake Controller for Brake Buddy Stealth Supplemental Braking System
    Yes, the Brake Buddy Stealth Supplemental Braking System, # HM39530 does require the installation of the brake controller to properly function. Please see the attached product review and installation videos.
    view full answer...
  • Troubleshooting Brake Buddy Stealth Not Charging Battery During Tow
    It sounds like you're wanting to wire a power wire into the coiled 7 way adapter plug that came with the Brake Buddy Stealth # HM39530, but I don't recommend cutting into that harness and there's something else going on here and causing the issue. If the Brake Buddy Stealth # HM39530 isn't charging your battery, your RV may not have the 12v charging pin activated on the 7 way connector; this would be the only way for it to transfer power to your towed vehicle battery. You'll want to...
    view full answer...
  • How To Fine Tune The Brake Sensitivity Of The Brake Buddy Stealth Brake Controller
    There is no set number for vehicles therefore the way to fine-tune the sensitivity of the controller is to put it at the 50 percent mark and then, in an open area, test the brakes by driving forward at about 25 mph and applying the brakes. If the vehicle stops too slowly, increase the maximum output. If it stops too abruptly or locks up, reduce the output.
    view full answer...
    Image 1 for
  • Product Comparison Of The Brake Buddy Stealth and Demco SBS Stay-in-Play Braking Systems
    Both the # HM39530 and the # SM99251 are both good options but for your needs I recommend the # HM39530. It uses a 7-way flat connector, which is included, and can plug into your lighting system with a 4 pole connector it has coming off of the 7-way flat connector. It also comes with a battery charger that will keep your battery charged as your tow. The # SM99251 does not come with a battery charger so you'd have to purchase a separate battery charger like the # BB54FR. Both braking systems...
    view full answer...
  • Troubleshooting Issues With A Brake Buddy Stealth Supplemental Braking Systems
    If you already trimmed the excess cable off when installing the Brake Buddy Stealth Supplemental Braking System - Proportional Item # HM39530 you might not have enough to add more slack to the line. Around the 8 minute mark of the attached video David explains installing the cable and adjusting it to the correct length. The cable being too tight would cause your issues with the hard braking. The issues with proportional braking can be attributed to the controller not being mounted at...
    view full answer...
  • Stealth Brake Buddy Placement on my 2013 Chevrolet Equinox
    We haven't had the opportunity to install the Brake Buddy Stealth Supplemental Braking System part # HM39530 on an Equinox yet but the Invisibrake is a very similar setup and we generally install them under the rear driver's side seat. The Equinox always seem to have just enough room for them and the Brake Buddy is just a little smaller. I've included a couple videos below to help explain the location I'm referencing.
    view full answer...
  • Towed Vehicle Wiring Kit For Use With Supplemental Braking
    You do not need to have specifically the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit, # RM-15267 when connecting the Brake Buddy Stealth Supplemental Braking System, # HM39530. However, you do need to have some sort of tail light wiring kit as it is required by law when flat towing a vehicle. Please note the attached videos for product.
    view full answer...
  • Wiring Options for Flat Towing 2015 Jeep Wrangler Unlimited Behind Motorhome
    What specific questions do you have? There are three types of taillight wiring options for the 2015 Wrangler Unlimited. What we typically recommend is a diode system like the Roadmaster Diode Kit, part # RM-152-98146-7. This is a permanently mounted system that provides everything necessary to set up your Wrangler Unlimited so it's taillights operate in tandem with the taillights of the tow vehicle. The included umbilical includes extra circuits which can be used for a battery charge...
    view full answer...
  • Brake Buddy Stealth Supplemental Braking System Breakaway Feature
    In the event of a breakaway the Brake Buddy Stealth Supplemental Braking System - Proportional Item # HM39530 will automatically engage your vehicle's brakes to help you safely stop the motorhome and vehicle and pull over.
    view full answer...
  • Brake Buddy Stealth Supplemental Braking System
    For the Brake Buddy Stealth Supplemental Braking System, # HM39530, I assume the length of cable you are asking about the red cable that makes electrical connections between the tow vehicle and towed. The overall length fully extended (Safely) is 73 inches.
    view full answer...
  • Brake Buddy Stealth Supplemental Braking System, Proportional for 2019 Jeep Cherokee
    Yes, I suggest the Brake Buddy Stealth Supplemental Braking System - Proportional, # HM39530. This too is a a proportional braking system that remains in the Jeep same as the Demco. It is an equivalent product to other originally recommended from a different, but very reputable company. See the attached link for a product review and installation video of this product on a Jeep Wrangler.
    view full answer...

Do you have a question about this Tow Bar Braking System?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality tow bar braking systems for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tow bar braking system information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Video Edited:
Jeff D
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Joshua S
Video by:
Joshua S
Employee Jonathan Y
Video by:
Jonathan Y
Employee Michael B
Video by:
Michael B
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Noah M
Updated by:
Noah M
Employee Alexander C
Written by:
Alexander C
Employee Shane H
Test Fit:
Shane H
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.