1. Tow Bar Braking Systems
  2. Chevrolet
  3. Suburban
  4. 1980
  5. Brake Buddy
FITS 1980 Chevrolet Suburban
Brake Buddy Classic 3 Portable Supplemental Braking System

Brake Buddy Classic 3 Portable Supplemental Braking System

Item # HM39494
lowest price pledge
Retail:$1,380.20
Our Price: $879.83
You Save: $500.37
Tow Bar Braking Systems
Confirmed to Fit
1980 Chevrolet Suburban

All models

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 17 lbs
Quantity: 
In Stock
Brake Buddy Tow Bar Braking Systems - HM39494
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Product Expert Mike S

Is this right for you? Product Expert Mike S says:

Yes, if you:

  • Need to tow multiple vehicles and don’t have much time for setup
  • Want the peace of mind that you won’t arrive at your campsite with a dead battery
  • Don’t want to pay for a braking system with all the bells and whistles

No, if you:

  • Want a system that doesn’t require any setup so you can hit the road faster
  • Travel through mountains or hilly areas frequently
Call etrailer.com at 800-298-1624 for expert service. We are your Chevrolet tow bar braking systems experts, and offer a lowest price guarantee. etrailer.com carries a complete line of Brake Buddy products for your Chevrolet Suburban 1980. Brake Buddy Classic 3 Portable Supplemental Braking System part HM39494 from Brake Buddy can be ordered online at etrailer.com. Complete tow bar braking systems installation instructions and technical support.
  • All Info
  • Reviews (12)
  • Q & A (79)
  • Photos
  • Why etrailer?

1980 Chevrolet Suburban - Brake Buddy Classic 3 Portable Supplemental Braking System

  • Brake Buddy
  • Brake Systems
  • Pre-Set System
  • Portable System

Get reliable braking with this lightweight, portable system. Actuator unit applies towed car's brakes after receiving signal via internal inertia sensor. Braking power settings let you adjust brake intensity based on your towed car's weight.


Features:

  • Supplemental braking system applies towed vehicle's brakes with preset intensity when it senses braking action of RV
    • Internal inertia sensor detects deceleration of towing rig and signals system to apply towed car's brakes
  • Braking power settings ensure that the system applies your car's brakes with the correct pressure
    • Eliminates over-braking and the damage it can cause
  • Advanced terrain-sensing ability prevents false braking
    • System won't activate when going over bumps
  • Wireless receiver plugs into 12V accessory outlet in cab of RV
    • Illuminates when system is activated
    • Flashes when car battery drops to below 10V
    • Gives off audible alert during breakaway
  • Lightweight, portable system is easy to position, adjust, and remove
    • TruFit risers allow unit to sit level for optimal performance
    • Quick-Lock clevis is simple to install on almost any car's brake pedal
  • Easy-Pull harness provides power and breakaway connection
  • 15-Amp charger charges your towed car's battery while you tow
  • 1-Touch Auto Start sequence prepares braking system with a push of a button
    • Removes excess vacuum pressure from your car's brakes
    • Checks braking system for errors
  • Compatible with hybrids and other cars with electric power-assist brakes


Specs:

  • Dimensions: 19" long x 11-3/4" wide x 6-3/4" tall
  • Power draw at 12V: 15 amps
  • TruFit riser adjustment range: 1" - 4" tall
  • Easy-Pull harness length: 36"
  • Weight: 11 lbs
  • 5-Year limited warranty


Automatic Braking Action

The Brake Buddy Classic 3 has a built-in inertia sensor that detects when your rig slows down. Once the system recognizes that you're braking, it will engage the actuator arm to press your towed car's brake pedal with an intensity chosen by you.


The main unit of the Brake Buddy Classic 3 is designed to activate only when deceleration is actually taking place. It is built with advanced terrain-sensing technology that keeps the unit from activating when you go over bumps in the road. As a result, your towed car's brakes won't engage unless you intend for them to engage.


Braking Power Settings

Classic Control Panel

The braking power settings determine how intensely the Brake Buddy Classic 3 applies your towed car's brakes. When you're first setting up the Brake Buddy, choose the braking power setting that's recommended for your vehicle type, as seen on the chart below.


Vehicle TypeRecommended Setting
Cars and Compact SUVsLow
Mid-size Crossovers, Mid-size Pickups and Small SUVsMed
Full-size SUVs and PickupsHi


The setting should be enough to cause your towed car to give a slight tug at your RV during a braking event. Braking power doesn't normally need to be reset unless you're changing to a different towed car.


Note: For hybrids or other cars with power-assist brakes, switch the braking mode to Hybrid mode.


Wireless Alert System Monitors Braking Action

Classic Receiver

Included with the Brake Buddy Classic 3 is a wireless receiver that will alert you of braking activity from the Brake Buddy actuator unit. This receiver inserts into the 12-volt outlet in your RV's cab.


Classic Transmitter

A separate transmitter plugs into the actuator box to send signals to the receiver.


When the Brake Buddy unit activates the towed car's brakes, the receiver will illuminate. If the towed car breaks away from your RV, the receiver will produce an audible signal.


Powering the Brake Buddy

Instead of connecting to a 12V accessory outlet, the Brake Buddy Classic 3 draws power directly from your towed car's battery. To do this, the included wiring harness connects to your car's battery. Install the harness by routing the wire end through your car's firewall and into your engine compartment. Connect the harness to your battery with the included battery wire and ring terminal.


Mount the connector that's on the opposite end of the harness in a convenient, out-of-the-way location beneath your car's dash.


Easy-Pull Harness

To connect the actuator unit to this connector, use the included Easy-Pull harness. This harness plugs into the connector below your dash, then into the braking system. When connected, the harness carries both power and breakaway functions in a single cord. And the large grip ring and wide handle make it easy to hold while connecting and disconnecting the actuator, all without ripping connectors or pulling on wires.


If you're concerned about your car's battery going dead as you tow, don't worry. The Brake Buddy Classic 3 includes a 15-amp charger that pulls power from your RV to keep your car's battery charged while the Brake Buddy is connected.


Fast Setup and Universal Design

Not every car is built the same. Some have brake pedals with unusual shapes. Some have uneven floorboards or mats. These differences can make it difficult to set up a portable braking system in your towed car. But the Brake Buddy Classic 3 is able to fit in almost any car on the market.


Quick-Lock Clevis

The Brake Buddy's actuator arm comes with an adjustable Quick-Lock clevis, which securely wraps around your towed car's brake pedal, regardless of the pedal's size or shape.


The clevis also comes with a quick-locking lever. Once you adjust the jaws of the clevis to fit your brake pedal, turn the lever to tighten the clevis in place. And when you're done towing, disconnecting the clevis is a snap. Just turn the lever to release the clevis jaws, and remove the clevis from your brake pedal. It's that simple.


Risers Off Kilter

Uneven floorboards can cause a portable braking system to sit at an angle in your towed car. This affects the leverage of the actuating arm, which can result in ineffective braking. Each of the TruFit risers on the Brake Buddy Classic 3 actuator unit can be individually adjusted, raising or lowering each corner of the actuator unit, so that the system sits level in your car. As a result, the actuator arm is able to press straight against the brake pedal to ensure that your brakes are properly depressed every time.


TruFit Risers with Wrench

To adjust the height of the risers, twist them counterclockwise, either by hand or with the included riser wrench. Pull each riser out to match the height you need, then twist the riser clockwise to secure it at that height.


One-Touch Auto Start

Classic AutoStart

The Brake Buddy Classic 3 will automatically check your brakes every time you start it up to confirm that your vehicle is ready to tow. After setting up the unit in your towed car, press the Auto Start button on the unit's control panel. The arm of the unit will push and release the brake pedal several times, removing vacuum pressure from the brakes to prevent overbraking. The unit will also check for any connection errors.




39499 Break Buddy Digital Classic Three Portable Towed Chevrolet Suburban Braking System by Hopkins


California residents: click here



Customer Reviews

Brake Buddy Classic 3 Portable Supplemental Braking System - HM39494

Average Customer Rating:  4.8 out of 5 stars   (12 Customer Reviews)

Get reliable braking with this lightweight, portable system. Actuator unit applies towed car's brakes after receiving signal via internal inertia sensor. Braking power settings let you adjust brake intensity based on your towed car's weight.

- HM39494
by:

I was in a pinch for time as I had a week before I planned to hit the road and my old brake buddy was not working properly. Roger assured me that he could get the new classic 3 to me in 4 days and he did. Haven't installed the harness yet but I am sure that I can do that in about an hour. I like the upgrades from my old model and I am looking forward to a safer trip. Thank you for the quick service



- HM39494
by:

Great product, had a problem with it and brake buddy overnighted a new one, great service.



- HM39494
by:
2021 Jeep Gladiator

I was on a time crunch, called etrailer and talked to Shanna S and she walked me through the product and ordering quickly. Fast and very friendly.



- HM39494
by:

I just received my order today,everything looks fine.the shipping was faster than I expected.Jesse was great to deal with I was really lost and needed help,he was very patient and made the correct suggestions for me . Once I have installed the tow bars, bracket, and braking system I will send in another review,thanks again Jesse



- HM39494
by:

have not installed yet....item came recommended by other users......know it will be great....Michelle (sp) was terrific on the phone....a great asset to your company. Be well and warm, Norm Ross



- HM39494
by:
2015 Jeep Wrangler Unlimited



- HM39494
by:

Easy to install. Works great!



- HM39494
by:

THIS PRODUCT WORKS AS THEY SAY IT DOES HAVE NOT HAD ANY PROBLEMS WITH IT BUT AFTER OWNING IT WISH I HAD SPENT ANOTHER 300.00 DOLLARS AND GOT THE NEXT STEP UP FROM THIS ONE



- HM39494
by:
2018 GMC Sierra 1500



- HM39494
by:
2000 Ford Ranger

Replaced an older model that died. Service was great.Expecting the same operation.



- HM39494
by:



- HM39494
by:
2012 Chevrolet Captiva Sport

Item was shipped early.


12
12

Ask the Experts about this Brake Buddy Tow Bar Braking Systems

  • Comparing the Brake Buddy Classic 3 and Brake Buddy Select 3 Supplemental Brake Systems
    Great question! The Brake Buddy Classic 3 # HM39494 is a more basic system than the Brake Buddy Select 3 # HM39524 as the Classic just uses preset braking (which applies the brakes at a preset intensity when the inertia sensor detects deceleration) while Select lets you choose between proportional and full-braking action (activates towed vehicle brakes at max power regardless of RV brake pedal intensity) when you’re towing a vehicle. The Select also comes with a remote control so you...
    view full answer...
  • How To Transfer Brake Buddy Classic 2 Portable Supplemental Braking System To Another Vehicle
    In order to transfer the Brake Buddy Classic 2 Portable Supplemental Braking System part 39495 or Brake Buddy Classic 3 Portable Supplemental Braking System part # HM39494 to another vehicle you will likely only need the Replacement Breakaway System for Brake Buddy Classic and Select Supplemental Braking Systems part # HM39340 and the Replacement Dash Mount Connector part # HM39342.
    view full answer...
  • Will 2019 GMC Acadia Denali Battery Drain While Flat Towing
    According to the recreational towing section of the online owner's manual for your 2019 GMC Acadia Denali (starting on page 359) there aren't any instructions about disconnecting the battery or removing a fuse to keep the battery from draining. With that being said, if you were to use a supplemental braking system that draws power directly from the battery, like the Brake Buddy Classic 3 # HM39494, then I do recommend installing the Flexo-Coil Wiring Kit # RM-15267 with the Charge Line...
    view full answer...
  • How Does Breakaway Switch Connect to Brake Buddy Classic 3 Braking System
    It sounds like you are asking about connecting the breakaway switch of the Brake Buddy Classic 3 Portable Supplemental Braking System # HM39494. I cut out some pages from the instruction manual for you to check out, but what you'll do is actually connect the brown and red wires from the Dash Mount Connector directly to the breakaway switch itself. The Dash Mount Connector is plugged into the harness that is connected to the Brake Buddy which is how the breakaway system will operate if...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Supplemental Brake System For Flat Towing 2016 Jeep Wrangler Sahara 2 Door
    To flat tow your 2016 Jeep Wrangler, I recommend going with the Brake Buddy Classic 3 Portable Supplemental Braking System # HM39494. This supplemental braking system is very easy to setup and use, and is also one of the more affordable braking system options available. I have attached an installation video on an earlier model Jeep Wrangler to help you with the install process. In order to safely tow your vehicle, you also need a diode taillight kit, safety cables, base plate kit,...
    view full answer...
  • Which Setting for Brake Buddy Classic 3 When Used in 2017 Jeep Wrangler
    I was able to confirm with my contact over at Hopkins, who manufacture the Brake Buddy Classic 3 # HM39494 that you will want to use the standard setting with your 2017 Jeep Wrangler. You would only want to use the "hybrid" setting with an actual hybrid vehicle since the amount of brake pressure required in those braking systems is minimal compared to regular vehicles, even with assisted braking systems. I've linked an installation video of this system on a similar Jeep JK for you to...
    view full answer...
  • Required Wiring To Flat Tow 2009 Jeep Wrangler Unlimited With Brake Buddy 2 Braking System
    There is two different sets of wiring used to hook your 2009 Jeep Wrangler Unlimited to your Motorhome. This will be the wiring for your braking system and wiring for your lights and turn signals. The Brake Buddy 2 or the newer Brake Buddy Classic 3 Portable Supplemental Braking System # HM39494 will include all necessary wiring for the install and using, but if you need the replacement wiring you can use Replacement Breakaway System # HM39340, Replacement Dash Mount Connector # HM39342...
    view full answer...
  • Will Brake Buddy Classic 3 Supplemental Braking System Activate with Exhaust Brake
    Sounds like you have an exhaust brake in your RV and you are wondering if the Brake Buddy Classic 3 Portable Supplemental Braking System # HM39494 will activate when the exhaust brake is active as well. Since your exhaust brake will activate the brake lights of your RV the Brake Buddy will also activate as well as that is the activation circuit this unit looks for.
    view full answer...
  • Solution for Vehicle Battery Draining When Flat Towed by Motorhome
    It's pretty common for vehicle batteries to die when the vehicle is being flat towed since the braking system typically draws it's power from the towed vehicle to activate. This is a problem for nearly all systems including the Brake Buddy Classic but we do have a solution for this with a battery charge line kit # RM-156-75 which will complete the circuit on your tow vehicle so the charge line of the Brake Buddy will be active.
    view full answer...
  • Is Braking System Really Needed To Flat Tow Small Chevy HHR Behind Motorhome
    Even for a lighter vehicle like your Chevy HHR that weighs just about 3,000 pounds, a supplemental braking system like the Brake Buddy Classic 3 # HM39494 is actually now required by law in almost every state. You will want to verify any local laws for states you plan to travel through, but based on my research all but 7 states require a supplemental braking system if the towed vehicle weighs 3,000 pounds or more. The Brake Buddy Classic that you referenced is a great solution for this....
    view full answer...
  • Can Brake Buddy Classic work w Tow Vehicle w Air Brakes and Towed Vehicle with Battery Disconnected
    The Brake Buddy Classic 3 Portable Supplemental Braking System # HM39494 that you referenced will work perfectly fine with your setup. Your tow vehicle having air brakes won't be an issue as this does not have to interface with that system at all, and then to power the unit in your 2019 Chevy Colorado that has to have the battery disconnected all you need is a power outlet kit part # RM-9332 which wires directly to the battery. So your vehicle being disconnected from the battery wouldn't...
    view full answer...
  • Does Brake Buddy Classic 3 Supplemental Braking Kit Fit 2020 Ford Escape Hybrid
    Yes the Brake Buddy Classic 3 part # HM39494 is a confirmed fit for your 2020 Ford Escape Hybrid but does also require you to install the Brake Lite Relay # RM-88400 so that it does not override your tow bar lighting setup.
    view full answer...
  • Does The Brake Buddy Classic 3 Require Splicing Into Towed Vehicle's Brake Light Wiring
    I am happy to answer all of your questions about the Brake Buddy Classic 3 Supplemental Braking System part # HM39494. The Brake Buddy Classic 3 uses a built-in inertia sensor to detect when the motor home is braking then the the actuator arm will depress the towed vehicle's brake pedal. The only wiring you have to do with the Brake Buddy Classic 3 is to wire to the towed vehicle's battery for power. One end of the included harness connects to the vehicle's battery and the other end...
    view full answer...
  • Will Brake Buddy Select Braking System Fit 2006 Jeep Wrangler Rubicon
    There's no reason the Brake Buddy Select part # HM39524 wouldn't work in your 2006 Jeep Wrangler. It just hasn't been added to our fitguide at this time. This is a proportional braking system that senses how hard you apply the vehicle brakes and applies them in a proportional amount on the tow vehicle. The advantage the Select model has over the Classic is that it can also give you a "full brake" setup which applies full braking power all the time when brakes are applied. This is particularly...
    view full answer...
  • Info on the Mopar Wiring Harness Needed When Flat Towing 2017 Jeep Cherokee
    The front wheel wobble issue with the 2017 Cherokee is fairly well known at this point and it is referenced in the owner's manual, on page 354 of the online edition. That page of the manual does warn owners to be certain to use the "proper MOPAR wiring kit to power the steering system during recreational towing". Without this part the steering system can be damaged. The part number is 68321424AB and it can only be obtained through Jeep. It is designed to keep the electric steering...
    view full answer...
  • Can the Brake Buddy Classic Braking System Be Used On a 2014 Jeep Grand Cherokee
    The Brake Buddy Classic 3 Portable Supplemental Braking System part # HM39494 we do offer and it's an excellent option for a 2014 Jeep Grand Cherokee. It comes with everything you need to control the vehicle's brakes via the motorhome. There are however some other items you'll need which I have attached below. Roadmaster Direct-Connect Base Plate Kit part # RM-521440-5 Roadmaster Falcon 2 Tow Bar part # RM-520 RoadMaster 68" Single Hook, Coiled Safety Cables part # RM-643 Roadmaster...
    view full answer...
  • Install Video to Use as Guide for Brake Buddy Brake Supplemental Braking System on 2018 JK Wrangler
    We actually had the chance to install the Brake Buddy Classic 3 part # HM39494 on a JK Wrangler like your 2018 model and we made an install video that covers the entire process that I have linked on this page for you to check out. This will show you where all of the connections need to be made.
    view full answer...
  • Does Brake Buddy Classic 3 Require Brake Lite Relay Installed on 2010 GMC Acadia
    With the Brake Buddy Classic 3 part # HM39494 installed on your 2010 GMC Acadia you would not need to also install a brake lite relay.
    view full answer...
  • Can Roadmaster Break Away Switch be Used With Hopkins Brake Buddy Supplemental Braking System
    The break away switch used on the Roadmaster Even Brake and the Hopkins Brake Buddy are both open circuit-style switches, they're normally open until the pin gets pulled at which time the circuit closes and the unit actuates the vehicle brakes. What you propose to do should work just fine but I'd recommend testing the switch a couple of times afterward to make sure everything still works the way it should. FYI, Brake Buddy does offer a replacement switch as part # HM39340. I've linked...
    view full answer...
  • Better Brake Buddy Controller to Use if you Travel Through Mountains or Hills Frequently
    If you plan on travelling through mountains, hills, or especially rocky terrain, then there is a chance that the Brake Buddy Classic 3, part # HM39494, could shake loose and become ineffective. As for what we consider frequent, that's hard to say: often enough that there's more of a chance to shake the controller loose. It sounds like you are worried about that, so instead I recommend the Brake Buddy Stealth, part # HM39530. This installs permanently and out of the way and utilizes a...
    view full answer...
  • Will the Brake Buddy work in 2002 Jeep Liberty?
    A box braking system like the Brake Buddy # HM39494 will not work on your 2002 Jeep Liberty. The floor board in front of the driver's seat won't allow the box to sit level, and therefore the system wouldn't effectively apply your vehicle brakes. I'd recommend the Demco Stay-In-Play # SM99251 for motorhomes with hydraulic brakes or the Air Force One # SM99243 for motorhomes with air braking systems. I've linked to some installation videos that you might find helpful.
    view full answer...
  • Troubleshooting Brake Buddy Classic That's Not Powering on When Plugged Into Cigarette Lighter
    There's good chance the fuse for your cigarette lighter socket is blown on your vehicle and that is why the Brake Buddy Classic # HM39494 is not powering on. I would recommend checking the fuse associated with this circuit on your vehicle and you should find the issue.
    view full answer...
  • Recommended Wiring to Flat Tow 2020 Jeep Wrangler Behind Motorhome
    To wire up your 2020 Jeep Wrangler so that it accepts the signal lights from your RV I highly recommend the Roadmaster Diode Flexo-Coil Wiring Kit # RM-15267. This will tap into the tail light circuits of the Jeep and provide you with a 6-Way to mount at the front, along with enough coiled wiring to go from there to the 7-Way on the motorhome. The included diodes prevent any potentially harmful feedback. I have attached an installation video on an earlier model Wrangler that you can...
    view full answer...
  • How To Install Break Away For Brake Buddy Braking System
    The Replacement Breakaway System for Brake Buddy Classic and Select Supplemental Braking Systems part # HM39340 replaces the brake away switch for the brake buddy Classic II, Select II, Classic 3 (# HM39494), and Select 3 (# HM39524). We have not yet installed the breakaway switch from this setup yet to have a video to for assistance but I have attached the installation instructions for installing the break-away with the Brake Buddy system.
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Is Mopar 68321424AB Harness Needed on 2020 Jeep Cherokee for Flat Towing
    The Mopar 68321424AB harness that you referenced is not needed on your 2020 Jeep Cherokee to set it up for flat towing. As you mentioned, this particular harness was needed on earlier model Jeeps to eliminate the "wobble" that would occur when being towed but this has been resolved on your 2020 model so the harness is no longer required. You might already have everything you need to flat tow your Jeep (base plates, tow bar, safety cables, lighting solution, braking system) but just...
    view full answer...
  • Parts Needed to Flat Tow 2020 Chevy Spark Behind Motorhome
    I can absolutely help set your 2020 Chevy Spark up so that it can be flat towed behind your motorhome, as long as it has a manual transmission. To do this you will need a base plate kit, a tow bar, safety cables, a lighting solution, a supplemental braking system, and possibly a high-low adapter. I will quickly list my specific recommendations below and then go into further detail on each further down. Base Plate Kit - Roadmaster Direct-Connect # RM-523202-5 (excludes ACTIV models) Tow...
    view full answer...
  • Parts Needed to Flat Tow 2020 Jeep Cherokee Trailhawk Behind Motorhome
    Absolutely! In order to flat tow your 2020 Jeep Cherokee Trailhawk behind a motorhome you will need a base plate kit, a tow bar, safety cables, a lighting solution, a supplemental braking system, and most likely a high-low adapter. I will quickly list out my specific recommendations below and go into a bit more detail on each further down. Base Plate Kit - Roadmaster Direct-Connect # RM-521451-5 Tow Bar - Roadmaster Nighthawk All Terrain # RM-676 (Safety Cables are included) Lighting...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality tow bar braking systems for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tow bar braking system information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Video Edited:
Jeff D
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video by:
Chris R
Employee Jonathan Y
Video by:
Jonathan Y
Employee Leah S
Updated by:
Leah S
Employee Mike S
Updated by:
Mike S
Employee Alexander C
Written by:
Alexander C
Employee Robert C
Test Fit:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.


Product Experts Available Now!
Call 800-298-1624