See what our Experts say about this Blue Ox Tow Bar Base Plate

• Parts Needed to Flat Tow 2019 Jeep Wrangler Unlimited Rubicon with a Smittybilt XRC Gen 2 Bumper
  I am really sorry about the delay in getting back to you! I sent all of this to our base plate manufacturers and currently they don't have a base plate that will fit your bumper but if you can get me the dimensions of the d-rings on your bumper I can see if one of the D-ring adapters we have will fit. I'd need the thickness or width of them as well as the diameter of the hole.
  view full answer...
  
• Blue Ox Tow Bar Adapter for Jeep Wrangler Unlimited with Off-Road Towing Bumper with 1-inch D-Rings
  To connect your Blue Ox tow bar, such as their Alpha # BX7380, to your Wrangler Unlimited's towing bumper's 1-inch D-rings you will want adapter kit # BX88358. This includes the 7/8-inch pins and retaining clips. You can see how this installs in the linked photo.
  view full answer...
  
• How To Use Tow Bar with D-Rings On Jeep Bumper
  In order to use a tow bar with a set of welded-on d-rings which are commonly found on aftermarket Jeep bumpers you need a specific type of tow bar, one that mounts on the motorhome when not in use. The Roadmaster Falcon 2 Tow Bar part # RM-520 and Blue Ox Alpha 2 Tow Bar part # BX7380 are both examples of motorhome mounted tow bars and are excellent options to use, the best value for the money. In order to use either tow bar with a set of welded-on d-rings you will need an adapter which...
  view full answer...
• D-Ring Rugged Ridge XHD Bumper Flat Tow Set Up For 2013 Jeep JK
  We have what you need. I will list them below for you. The Blue Ox Aftermarket Off-Road Bumper Adapter - 7/8" Pin # BX88357 for your 1 inch D-rings. The etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates - RV Mount - 2" Hitch - 6,000 lbs # e47ZR. The Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor - Proportional # DM86VR. The Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7. The Curt High-Low...
  view full answer...
• Can the Blue Ox Aladdin Tow Bar be Used with the Smittybilt XRC Atlas Bumper
  You are correct. You will need an adapter to use the Blue Ox Aladdin tow bar with the Smittybilt XRC Atlas bumper. We have exactly what you need. It is adapter # BX88357.
  view full answer...
• Why Do I Need To Disconnect My Battery When Flat Towing A 2024 GMC Canyon
  Hello Steve, thanks for reaching out. The battery must be disconnected when flat towing a 2024 GMC Canyon behind a motorhome because GMC say so in the Canyon owners manual. Generally speaking, when the owners manual calls for the battery to be disconnected it is because certain features need to be disabled so they don't draw power from the vehicles battery and drain it while towing. If you need to know exactly which features that is then you would need to contact your local dealer as I...
  view full answer...
• Base Plate for 2014 Jeep Wrangler With 1 D-Ring Bumper Mounts
  We have exactly what you need to flat tow your 2014 Jeep Wrangler with an off-road bumper that has 1" D-ring brackets, the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick # RM-035-1. As the name of the product states, however, they will require a Roadmaster tow bar as there are no adapters to use with a Blue Ox tow bar. For this I highly recommend checking out the Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522 because it has long arms...
  view full answer...
• Recommended Flat Towing Set Up for a 2024 GMC Canyon Denali
  Congrats on the new truck Wayne! I would be happy to make suggestions but I wanted to address one of the parts you got with your RV. The Blue Ox Off-Road Bumper Adapters item # BX88357 that came with your RV attaches to specific bumpers rated to be flat towed that have D-rings. We do not have anything like that. Unless the new Canyon's come with an option for D-rings instead of tow hooks you'll need to find an aftermarket bumper or use a traditional base plate like item # RM48GR. If you...
  view full answer...
• Will Blue Ox Off-Road Bumper Adapters Work With Aventa Tow Bar?
  Hello Rob, thanks for reaching out. Yes, the Blue Ox Off-Road Bumper Adapters will indeed work with your Aventa tow bar. You will just need to select the correct adapter based on your D-ring opening size. Here are the options: - Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars - 1" D-Rings # BX88358 - Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars - 7/8" D-Rings # BX88357
  view full answer...
• Parts Recommended for Flat Towing a 2006 Jeep Wrangler with D-Rings on the Front Bumper
  Hey Eric, thanks for reaching out! The parts I recommend for flat towing your 2006 Jeep Wrangler include the following: - Blue Ox Avail Non-Binding Tow Bar # BX7420 - D-Ring Adapter for 7/8" D-Rings # BX88357 or 1" D-Rings # BX88358 - Flexo-Coil Wiring Kit # RM-15267 - Brake-Lite Relay Kit # RM-88400 - Brake Buddy Select 3 Portable Flat Tow Brake System # HM39524 - High-Low Adapter (see attached article) Please note that you'll need to confirm with the manufacturer if your front...
  view full answer...
• Recommended Demco Tow Bar for Blue Ox D-Ring Adapters
  Maybe! It depends on what year bronco you have, what bumper is on your Bronco, and what model tow bar you're using. Are you using Off-Road Bumper Adapters like item # BX88357? You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.
  view full answer...
• D-Ring Adapter For Blue Ox Tow Bar on Jeep Wrangler
  Thanks for that photo, and since you have a bumper with D-ring attachments, you would not need base plates; in fact, base plates wouldn't be able to be installed, so instead you would need a bumper adapter that attaches to the D-ring attachments. Your bumper does need to be rated for flat towing so you'll need to check with the manufacturer to ensure that if you're not certain, but if it is, and if the bumper has a 1" or 7/8" pin hole and the tab is 3/4", 7/8", or 1" then what you will...
  view full answer...
  
• Need Tow Bar Setup For 2013 Jeep Wrangler Sport With Aftermarket Bumper
  Hello Doug, thanks for reaching out. It is possible to connect a tow bar to an aftermarket bumper with D-rings. Blue Ox actually makes D-ring adapters that work with their tow bars. Take a look at the following: - Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars - 7/8" D-Rings # BX88357 - Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars - 1" D-Rings # BX88358 I believe this is what you are looking for but if your bumper has a different kind...
  view full answer...
• Base Plate Solution for 2017 Jeep Wrangler Jurassic Park with Oedro Bumper and D-Rings
  That's actually a bumper that your 2017 Jeep Wrangler Unlimited Jurassic Park edition did not come with from the factory so you would need to go a different route. What you have is an Oedra bumper. Since your aftermarket bumper has D-rings you'd need to go with the D-ring base plate kit adapters like the part # BX88358. This kit fits 1 inch D-rings like it looks like your bumper has. If instead you have 7/8 inch D-rings you'd want the part # BX88357.
  view full answer...
  
• Recommended Flat Towing Parts for a 2004 Jeep Wrangler TJ
  Thanks for the pictures and part number! There are a couple of different options to connect your Blue Ox Alpha Tow Bar item # BX7380 and which one you need depends on what bumper your 2004 TJ has. Double tube bumper or standard factory bumper - Blue Ox Base Plate Kit - Fixed Arms item # BX1120 Off Road Bumper with 7/8" D-Rings - Blue Ox Off-Road Bumper Adapters item # BX88357 Off Road Bumper with 1" D-Rings - Blue Ox Off-Road Bumper Adapters item # BX88358 Some other parts you will...
  view full answer...
  
• Tow Bar To Attach To Warn Elite Bumper On A 2014 Jeep Wrangler
  We do offer tow bar setups that can attach to the D-rings on the Warn Elite Bumper. You will need to use a D-ring adapter to connect the tow bar. For the adapter you have the following options: 1" Thick D-Rings # RM-035-1 3/4" Thick D-Rings # RM-035 These adapters will work with the Roadmaster motor-home-mounted tow bars. For that I recommend the Roadmaster Falcon All-Terrain Tow Bar # RM-522. This is a very solid non-binding tow bar rated for 6,000 lbs. We made a few videos highlighting...
  view full answer...
• Recommended Blue Ox Base Plate Kit for a 2018 Jeep Wrangler
  There are a couple of different options for base plate kits that are compatible with your Blue Ox Ascent Tow Bar item # BX4370 depending on whether or not your 2018 Jeep Wrangler is a JL or JK model. For a Jeep Wrangler JL you will want the Blue Ox Base Plate Kit item # BX1139 For a Jeep Wrangler JK you will want the Blue Ox Base Plate Kit item # BX1134 If your Jeep has an offroad bumper with D-Rings that is rated for flat towing, you will need either the 7/8" D-Rings item # BX88357...
  view full answer...
• Is There A Compatible Baseplate Available For A 2012 Jeep Wrangler With A SmittyBilt XRC Bumper
  We don't have a confirmed fitting baseplate for a Smittybilt XRC bumper, but since it has a D-Ring mounts you could reach out to Smittybilt and see if this bumper is rated for towing from the D-Rings. If so then you would just need to measure the thickness of the rings to see which adapter will fit. Blue Ox currently offers two adapters, 7/8" thick D-Rings # BX88357 or 1" thick D-Rings # BX88358, that would be compatible with your Blue Ox Avail Non-Binding Tow Bar # BX7420. If the bumper...
  view full answer...
• Parts Needed to Flat Tow 2022 Jeep Gladiator with D-Rings on Front Bumper
  Flat towing setups can end up being pretty expensive. Especially when you pay to have the components installed but that does seem high. Since you like Blue Ox and your Gladiator has D-rings you'd need either the part # BX88357 if you have 7/8 inch D-rings or the part # BX88358 if you have 1 inch D-rings. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. One of the most popular compatible...
  view full answer...
• Can 2015 Ram 3500 with Fabfours Bumper be Flat Towed
  You can probably come up with a way to install the Blue Ox base plate kit part # BX1989 on your 2015 Ram and fit with your Fabfours bumper but we don't have specific instructions for that or how much modification would be required. It does look like your bumper has D-rings so a D-ring adapter base plate kit would be a solution like with the part # BX88357 for if they are 7/8 inch or the part # BX88358 for if they are 1 inch.
  view full answer...
• Dimensions of the Replacement 7/8" Pins and Spacers for Blue Ox Off-Road Bumper Adapters
  Thanks for your patience I just heard back from Blue Ox. The insertable length of the Replacement 7/8" Pins and Spacers item # BLU73XR is right a 3-1/4". Blue Ox gave me a diagram that I have attached below that will give you more detailed dimensions of this pin and the Blue Ox Off-Road Bumper Adapters item # BX88357 it works with.
  view full answer...
  
• Is There a Blue Ox D-Ring Adapter for a Smittybilt XRC Gen2 Bumper
  If you do not have a 7/8" pin and need a larger one, you will need the Blue Ox Aftermarket Bumper Adapter - 1" Pin # BX88358. This includes pins, clips, washers, and lock nuts and will get you the clearance needed to fit your Smittybilt XRC Gen2 bumper.
  view full answer...
• Do The Blue Ox D-Ring Adapters Work With The 2023 Ford Bronco Heavy Duty Modular Bumper
  Before you hook up to your bumper you'll want to confirm with Ford that your specific bumper is rated for flat towing. To my knowledge the D-Rings on the Modular bumper are only for recovery purposes. If you have their approval you'll just need to measure the D-Ring thickness. The Blue Ox Off-Road Bumper Adapters # BX88357 are designed to fit D-Rings that are 7/8" thick. If you get word from Ford that your D-Rings are not useable for flat towing then you would need to go with the Blue...
  view full answer...
• Will the Adapter Lug for Off-Road Vehicle Bumpers Work with the Blue Ox Ascent Tow Bar
  Yes, the Adapter Lug for Off-Road Vehicle Bumpers to Blue Ox Towbar part # BX88357 will work with a Blue Ox Ascent Tow Bar which I confirmed with Blue Ox for you.
  view full answer...

Do you have a question about this Tow Bar Base Plate?