1. Tools
  2. LubriMatic
  3. Grease and Lubricants
  4. Greasing Tools
  5. 14 oz
  6. Grease Gun
LubriMatic Standard-Duty, Lever Action Grease Gun

LubriMatic Standard-Duty, Lever Action Grease Gun

lowest price pledge
Retail:$30.26
Our Price: $23.23
You Save: 23%
Tools
Orders above $99 qualify for Free Shipping
Shipping Weight: 3 lbs
Quantity: 
In Stock
LubriMatic Tools - L30200
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

This multi-purpose grease gun is capable of handling household jobs, even routine automotive maintenance. Its black metal casing fits a 14 oz. cartridge and is capable of producing up to 6,000 psi! Lowest Prices for the best tools from LubriMatic. LubriMatic Standard-Duty, Lever Action Grease Gun part number L30200 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (33)
  • Q & A (72)
  • Videos (2)
  • Photos
  • Why etrailer?

LubriMatic Tools

  • Grease and Lubricants
  • Greasing Tools
  • LubriMatic
  • 14 oz
  • Grease Gun
  • 6000 psi

This multi-purpose grease gun is capable of handling household jobs, even routine automotive maintenance. Its black metal casing fits a 14 oz. cartridge and is capable of producing up to 6,000 psi!


Standard-Duty Grease Gun

Ideal for household and do-it-yourself automotive use. Uses standard 14 oz. cartridge. Develops up to 6,000 PSI. Delivers 1 oz. Of grease/40 strokes.

30-200 Stand Duty Lever Action Grease Gun



30-200 LubriMatic Standard-Duty, Lever Action Grease Gun

Item # L30200





Video of LubriMatic Standard-Duty, Lever Action Grease Gun

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for LubriMatic Standard-Duty Lever Action Grease Gun Review

Hi there trailer owners, today we're going to be taking a look at Lubrimatics 14 ounce lever action grease gun. We just got done repacking the bearings on our trailer here. There was no damage to the bearings but it had been quite a few years now that this trailer's been in service, so it's always a good idea to check your bearings, make sure there's no pitting or scoring on them. And while you're there you should replace the grease to get out any dirt, moisture or anything else that's in there to ensure you've got nice, smooth operation.After you've got those replaced if you greased them, you can use our gun here if you've got easy lube axles, and this is actually something you can do without having to take the bearings all the way out and check them. We inspected them and did everything to make sure that they we're okay, but you can just go in here and add some new grease. The grease fitting is located right there.

Our end we'll click right onto it and then we just pump our gun. And as we're pumping our handle here, it's filling our cavity up inside with grease and that also pushes it through our bearings.The guns are rated for 6,000 pounds of pressure which is more than you're ever going to need when you're using it with your wheel bearings here in most cases, but many of your other components on your trailer require lubrication as well. Especially if you've upgraded your equalizers or the pins for your leaf springs. A lot of the replacements are going to have grease fittings on them so you can grease those and extend the life of those components.With those, they do often freeze up, rust gets in there and it can be difficult to deliver grease to it. And that's where having that 6,000 pounds of pressure really comes in handy because you can drive out that rusting corrosion and get that grease into those spots that have been missing it for potentially many years.

With our lever here it does deliver grease of one ounce over 40 strokes, so this is per stroke that we've got coming out there.And again, over 40 strokes, that's going to be about one ounce of grease. Now if you need some grease for your gun we've got plenty of greases available from Lubrimatic here. They offer both marine and wheel bearing grease. We're using the standard wheel bearing grease on this but the marine we would be using on something like a boat trailer. They're available in tubs or cartridges, and this is going to use the 14 ounce cartridges here.So when you're ready to install one or replace one that has been emptied, you'll want to start by pulling on the lever here at the back and this will pull out.

It is going to be a little hard to pull it if you've already used it. And then once you've got it pulled back there's a small slot in the bottom, it'll just tip to the side and that's going to hold this in the release position.We've released all the spring pressure on the seal that's pushing up on our grease. We can then remove the top and here inside we've got our cartridge. This one's not completely empty yet so we're going to be saving it, but it does just slide out of here. We can see there.

So when you go to install your new one, that was the standard wheel bearing grease. We've got some marine grease here we're going to be sliding in there.We'll start by taking the cap off. It will then slide down inside our tube. I like to give it a little push and twist, it can release the lever here at the back when you do that. But it's important that you get the seal up inside of your tube here in order for it to push properly and get out any air that's inside of it.Once you've got it down in there, the top here just has a pop top just like on a soda can. So we're just going to pull that and we can now re-install the top. On the top here it does have a small fitting you can use to bleed out any air, but what I actually found that I like better than grabbing an allen key and removing this is to just loosen this up a turn or two, just like that. And when we go to release this now it's going to push the air out past the threads.So it'll just save you from having to go get another tool. Once we've done that we're just going to go back and forth just to make sure it gets that air out of there, and then we'll tighten it up. And at this point you're ready to start filling anything, we're just going to test it out here on our rag. And you can see the difference in color between our wheel bearing grease that's coming out, what was left in there, and the marine grease there. It's kind of a bluish green versus a darker forest green. And you can see now we are into our new marine grease. And that completes our look at Lubrimatics 14 ounce lever action grease gun..


Customer Reviews

LubriMatic Standard-Duty, Lever Action Grease Gun - L30200

Average Customer Rating:  4.5 out of 5 stars   (33 Customer Reviews)

This multi-purpose grease gun is capable of handling household jobs, even routine automotive maintenance. Its black metal casing fits a 14 oz. cartridge and is capable of producing up to 6,000 psi!

- L30200
by:

Great product. Easy to use.. No issues since bearing maintenance.



- L30200
by:



- L30200
by:

Suits its purpose as a cheaper grease gun. I had trouble getting the air bleed out but this may be just because I have never used a grease gun before. I ended up removing the bleed set screw and used my finger over the hole while applying grease. Worked great like this. Just had to release the ram rod in the back when I was done so grease wouldn't shoot out the bleed hole.



- L30200
by:

Hey its the basic grease gun. What can I say: Use to grease the trailer hubs or anything else. Fast service and always available to chat and I like etrailer prices,



- L30200
by:

Exactly what I needed for the wheel bearings on my travel trailer.



- L30200
by:

Perfect fit for the 14 oz grease cartridges and the dexter axle/hub fittings.



- L30200
by:

It is your "basic" grease gun. It has worked A-OK the few times I've used it his year. It seems solid and I do not expect any issues with it in the future.



- L30200
by:

not much to say .... works well, no issues. Previously had one from the discount hardware store, this one is much nicer.



- L30200
by:

This is a good value for a grease gun.



- L30200
by:

Works well, especially for the price. The fitting was a little tight and hard to remove from the zerk for the first few uses, but got easier by the time the job was complete. Would recommend to a friend.



- L30200
by:

Perfect for my needs



- L30200
by:

Quick service, free shipping and order was packed well and received with no damage. Would definitely refer friends to etrailer.



- L30200
by:

I bought trailer mirrors and they work just great.



- L30200
by:

great basic grease gun for the do it yourself person



- L30200
by:

Great company to work with. Great products, prices, and service.



- L30200
by:

Quality product, great service and speedy delivery.


Comments
No problem. Working great.
Richard - 09/03/2016



- L30200
by:

Product works great! Fast shipping. Definitely will shop here again


Comments
Great products for a great price. I like them very much.
JR - 09/27/2016



- L30200
by:

Solid greaser. Easy fill and use.



- L30200
by:

The gun will not draw grease.


Comments
At the top of the grease gun, next to the spout is the bleeder screw. Make sure that screw is tight. If it isnt snugged up, itll allow air in the cylinder, which will prevent the grease from being drawn up into the grease gun.
-- Etrailer Expert Mike L - 08/30/2018


- L30200
by:

Very nice quality. Super solid build.



- L30200
by:

Excellent service. Ordered moly grease. Arrived as promised!



- L30200
by:

Product works. i totally understand why they don't want you reviewing shipping on here. Don't count on it being on time. -



- L30200
by:

Product showed up and worked as it shou ld.



- L30200
by:

Received very fast. Got exactly what I ordered. I will use again, and recommend to others.



- L30200
by:

Working as expected.


25
33
Show More Reviews

Ask the Experts about this LubriMatic Tools

  • Recommended Grease for Hub and Drum
    The grease I highly recommend for you is the LubriMatic Wheel Bearing Grease for Disc and Drum Brake Applications # L11465. This is the highest-rated grease and will do a fantastic job; I also recommend using the LubriMatic Standard-Duty, Lever Action Grease Gun # L30200. I have added links to video reviews of both the grease and grease gun for you to check out.
    view full answer...
  • Will Outer Bearing Push Out If Grease Is Installed and the Spindle Nut Isn't On
    Bearings fit pretty tightly to the spindle as the clearances are very tight. Combined with that and the vertical pressure of the hub on the spindle/bearing it's held in place well and the grease would not push it out. "With the EZ lube zerk fitting you'll want to pump grease until you begin to see the outer bearing move or you see grease seeping through the outer bearing. If you pump the grease slowly and rotate the hub, you should not blow the grease seal. Once you see the grease seeping...
    view full answer...
  • Do I Really Need To Repack Bearings Every 12 Months If I Have Low Mileage On Trailer
    The bearings should really be repacked every 12,000 miles or 12 months whichever comes first even if you are not putting 12,000 miles on the trailer. It still a good idea to routinely repack the bearings every 12 months because the grease breaks down over time regardless of the mileage which can lead to bearing failure. I have attached a couple of helpful articles for your reference.
    view full answer...
  • How Often Should Trailer Hub Bearings be Greased with EZ Lube Spindles
    Standard tapered trailer wheel bearings are recommended to be re-packed with fresh bearing grease about every year or every 12,000 miles under normal use. In certain conditions this interval could be shorter, such as if you routinely tow the trailer under conditions of extreme heat or near its maximum load capacity. This and other recommended trailer maintenance procedures are outlined in the linked article, which may interest you. With the EZ lube zerk fitting you'll want to pump grease...
    view full answer...
  • How Much Grease is Needed in an EZ Lube Axle
    I can help you with greasing up your EZ Lube Axle. First thing I would check would be that the grease is not coming out of the back of the axle through the seal. If this is the case you will need to replace the seal. Our tubes like # L11390 have 14 ounces which should be more than enough to fill your axle. You will want to continue to pump grease until you begin to see the outer bearing move or you see grease seeping through the outer bearing. Make sure you pump the grease slowly...
    view full answer...
  • How Often Should Trailer Hubs Get Greased with EZ Lube Spindles
    Standard tapered trailer wheel bearings are recommended to be re-packed with fresh bearing grease about every year or every 12,000 miles under normal use. In certain conditions this interval could be shorter, such as if you routinely tow the trailer under conditions of extreme heat or near its maximum load capacity. This and other recommended trailer maintenance procedures are outlined in the linked article, which may interest you. With the EZ lube zerk fitting you'll want to pump grease...
    view full answer...
    Image 1 for
  • How Often Should Trailer Hub Bearings be Greased
    Standard tapered trailer wheel bearings are recommended to be re-packed with fresh bearing grease about every year or every 12,000 miles under normal use. In certain conditions this interval could be shorter, such as if you routinely tow the trailer under conditions of extreme heat or near its maximum load capacity. This and other recommended trailer maintenance procedures are outlined in the linked article, which may interest you. With the EZ lube zerk fitting you'll want to pump grease...
    view full answer...
  • Oil Bath or Grease for HydraStar Disc Brake Kit with Actuator for Tandem Axle Trailers
    In regards to the bearings, trailer bearings nowadays are generally made overseas; there may be some exceptions here and there, but they generally aren't standard trailer bearings. The bearings and seals that come with the HydraStar Disc Brake Kit with Actuator for Tandem Axle Trailers # HSE7K-T1 are of the highest quality and you won't have any issues. As far as changing from grease to oil bath, that is not recommended for trailer hubs. Oil bath hubs can be problematic because they...
    view full answer...
  • Grease Fitting Locations for Curt A20 Fifth Wheel Hitch
    The zerk fittings for the Curt A20 hitch part # C16140 are located on the front of each jaw.The jaws must be in the closed and locked position for the zerks to be accessible. They are kind of hard to see but I attached a picture that points them out. Curt recommends high pressure grease like the part # L11465. If you need a grease gun we have part # L30200.
    view full answer...
    Image 1 for
  • What is the Best Grease for Trailer Bearings
    Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high temperatures (like what occur on a trailer hub that has massive RPMs when travelling, even at slower speeds) so it will continue to lubricate instead of quickly dissipating like you see with lower rated greases. The best grease for trailer bearings...
    view full answer...
  • Complete Electric Over Hydraulic Brakes Set Up With Tandem 3,500 lb Timbren Axle-Less Suspension
    We do have all the parts you need for a total conversion to a disc brake electric over hydraulic braking system to go with the Timbren axle-less suspension system. This will include stainless steel brakes and wheel lug nuts, as well as all of the hoses. The hubs will have six lugs so the wheels will need to have a 6 on 5-1/2" bolt pattern, and I will offer my recommendation for those wheels and tires. Here is the list you were wanting with all the needed parts for a new set up: -...
    view full answer...
  • Trailer Drum and Hub That Fits #84 E-Z Lube Spindle with Brake Flange for 3,500 lb Axle
    The #84 E-Z Lube Spindle with Brake Flange for 3,500-lb Trailer Axles # TRU77FR is, as the name says, for a 3,500 lb axle, and we can get all the parts you are looking for. You did not mention what bolt pattern you needed, so I'll give options for either a 5 on 4-1/2" or 6 on 5-1/2". If you aren't sure what you have, I've added a link to a help article so you can determine which you need. Additionally, the hub and drums do come with the bearings, reaces, and grease seal so you won't need...
    view full answer...
  • Best Way to Grease Trailer Hub that Has EZ Lube Spindles
    Here's the process on pumping grease into a hub that has EZ lube spindles. But please be careful not to overfill the hub as it's easy to do and will blow out the grease seal. First, grease your bearings and spindle by hand or with a bearing packer like part # L70025. If you are going to do it by hand, start with a gob of grease in your palm and then press the bearing into the grease with some force. Next, insert your bearings and grease seal in the hub and mount your hub on your...
    view full answer...
  • Hubs and Electric Brakes for 2011 Keystone Springdale 179QBWE Travel Trailer
    Thanks for that info and honestly, you did most of the work yourself so you made this easy and it really is appreciated. The Dexter Trailer Hub and Drum for 3,000-lb Axles # 008-418-02 is exactly what you need to replace your Dexter 8-418 and though there is not a kit for this specific hub I will list everything you need for each hub: Inner bearing # LM67048, Outer bearing # L44649, Grease Seal # 58846. You do not actually need to order the accompanying races because they do come with...
    view full answer...
  • Proper Lubrication of Curt Q20 5th Wheel Trailer Hitch
    For the Curt Q20 5th Wheel Trailer Hitch # C16536, Curt does recommend that black graphite grease be used for the jaw before each individual use and every 1,000 miles thereafter. Black graphite grease can usually be obtained at a local auto parts or hardware store and will probably just be labeled as "graphite grease". If you do not already have a manual grease gun, you can use # L30200. You can use the grease fitting that is centered in the cast base plate to grease the lower bearing...
    view full answer...
  • Needing Brakes, Hubs, Bearings and Seals for a set of AL-KO Axles with 10 X 2-1/4 Inch Brakes
    The brake assemblies that I recommend to replace your AL-KO brakes are # AKEBRK-35R and # AKEBRK-35L. Theses are the brake assemblies for both the left and right sides of the axle. I like these brake assemblies over the others we carry for two reasons, the shoe pads are machined rather than clipped and the magnets on theses brakes are thicker. The machined shoe pad will wear better and are sturdier than the clipped end shoe pad. The thicker magnet will wear better and in turn last longer...
    view full answer...
    Image 1 for
  • Grease for Use With Reese Goose Box
    Yes, you can absolutely use an all-purpose lithium grease for your new Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter # RP94720. A great option is the LubriMatic Multi-Purpose Lithium Grease # L11315 which will work with LubriMatic Standard-Duty, Lever Action Grease Gun # L30200. This is a 14 oz. cartridge though there is also a small 3 oz. cartridge and grease gun, the LubriMatic Mini Grease Gun Kit with Multi-Purpose Grease # L30132.
    view full answer...
  • Where to Grease a Curt Q20 5th Wheel Trailer Hitch
    The Curt Q20 5th wheel hitches # C16536 and # C16130 have grease fittings on them on the underside of the head, left and right side and a grease fitting down between the jaws. I included a picture showing the locations for you. to access the one between the jaws you will need to have the jaws closed. Black graphite grease is recommended for the jaw pins and the lower bearing assembly jaw. You can use a regular manual grease gun such as # L30200 if you do not have one. Next, if you...
    view full answer...
    Image 1 for Image 2 for
  • Can the LubriMatic LMX Grease Part # L11390 Be Used in Trailer Hubs with Disc Brakes
    The LubriMatic LMX Industrial Strength Grease part # L11390 can indeed be used in the bearings on you 5th wheel trailer with disc brakes but I recommend the LubriMatic Wheel Bearing Grease for Disc and Drum Brake Applications part # L11465 as it has a higher drop point which will allow for greater temperatures before the molecules in the grease begin to break down and wear out. If you need an applicator gun then I recommend the LubriMatic Standard-Duty, Lever Action Grease Gun part #...
    view full answer...
  • How to Grease EZ Lube Axles
    A 14 oz container like the part # L11390 would be more than enough to grease your hubs. For a grease gun you would want part # L30200. Here's how to grease everything upon initial installation. First, grease your bearings and spindle by hand or with a bearing packer like part # L70025. If you are going to do it by hand, start with a gob of grease in your palm and then press the bearing into the grease with some force. Next, insert your bearings and grease seal in the hub and mount...
    view full answer...
  • Replacement Bearings for Dexter 8-248 Hub
    Thank you for the photos as they show you have a Dexter 8-248 hub such as the Dexter Trailer Hub # 8-248-50. The correct replacements bearings for that are Inner Bearing # L68149 and matching Race # L68111, Outer Bearing # L44649 and matching Race # L44610. The correct Grease Seal is # 58846. I also recommend using the LubriMatic Marine Trailer Wheel Bearing Grease # L11402 with Grease Gun # L30200.
    view full answer...
    Image 1 for
  • Replacement Grease Seals For TRP GS-1719DL
    From the numbers you provided it sounds like you need replacement grease seals. In my research, the grease seals I found with the GS-1719DL number have a 1.72 inside diameter and 2.565 outside diameter. The replacement double lip grease seals you need are part # RG06-050. There are 2 seals in the package. When replacing any components for your hub, you will want to make sure you either get the numbers for the parts or take precise measurements with a digital caliper. I have attached...
    view full answer...
    Image 1 for
  • Grease Recommendation for Blue Ox Sway Pro Weight Distribution
    You are correct that the Blue Ox SwayPro weight distribution systems do require the use of molybdenum grease. For that you would want the part # L10314. If you need a grease gun for that you would also need the part # L30200.
    view full answer...
  • Parts Needed to Add Brakes to Lippert 3500lb Axle on an Utility Trailer
    We have the parts that you will need to add brakes to you Lippert 3,500lbs axles. For the brake assemblies, I recommend the Electric Trailer Brake Kit, # AKEBRK-35-SA. This kit includes both the left and right brake assemblies and will bolt right to your 4 hole brake flange that is already on your axle. The brakes are self-adjustable and will only need an initial set-up at installation. The drums that you will most likely need will be # AKHD-545-35-K. This drum will include bearings,...
    view full answer...
    Image 1 for Image 2 for
  • How To Apply Grease When Using EZ-Lube Axles
    When you are assembling the hub components you want to make sure you fill every space of the bearings with grease like part # L11465. To make this easier you can use a bearing packer like part # L70025. If you do not have one, you can use a grease gun like part # L30200. After you have packed the bearings you will want to apply a thin layer of grease to the spindle before installing the remaining parts. Then, insert your bearings and grease seal in the hub and mount your hub on your...
    view full answer...
  • What is the Replacement Wheel Hub Needed on the Axle of a 1996 Jayco 1207 Popup Trailer
    We have a hub that will fit your 1996 Jayco popup trailer. The Dexter Trailer Hub assembly, # 8-91-05UC1-EZ, that you referenced will work on your trailer axle. This hub uses the # L44649 bearings and has a 4 bolt lugs. Measuring the current hubs bolt pattern will tell you for sure if this hub will work for you. I have attached an article that will explain how to find what your wheel bolt pattern is on your current hub. If you do not have grease zerks at the end your axle spindles,...
    view full answer...
  • Will the # AKIHUB-545-35-G-EZ-K Hub Come Fully Greased
    The Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles, # AKIHUB-545-35-G-EZ-K, does not come fully grease. The bearings will need to packed at the time of installation. I recommend using the LubriMatic Marine Trailer Wheel Bearing Grease, # L11402, on these hubs. If you do not already have a grease gun, I recommend using # L30200. Also, I recommend using the LubriMatic Deluxe Bearing Packer, # L70025. This bearing packer will make packing your wheel bearings an easier and less...
    view full answer...
  • Can You Use Industrial Strength Red Grease In The Dexter HD Suspension Kit # K71-358-00?
    Yes, you can use a Lithium Complex grease like Lucas Oil's Red and Tacky or Lubrimatic's LMX Industrial Strength Red Grease, # L11390 in these shackles. These Lithium Complex grease products resist water and stay in place, which means they work well on external parts that are exposed to the weather. Lithium Complex grease works well with trailers that are heavily loaded as well as industrial or agricultural trailers that get a lot of use. If your trailer is not used for industrial or...
    view full answer...

Do you have a question about this Tool?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality tools for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tool information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video by:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee David F
Installed by:
David F
Employee Kristen H
Updated by:
Kristen H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.