LubriMatic Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge

LubriMatic Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge

Item # L11465

lowest price pledge

Retail:$26.77

Our Price: $15.95

You Save: 40%
Tools

Orders above $50 qualify for Free Shipping

Shipping Weight: 1.06 lbs

Arrives before Christmas with Ground or Free Shipping.
Quantity: 
In Stock, Ships Today
LubriMatic Tools - L11465
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos

This LubriMatic polyurea-based grease meets high-temperature requirements for wheel bearings for all disc and drum brake applications. Lowest Prices for the best tools from LubriMatic. LubriMatic Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge part number L11465 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (42)
  • Q & A (72)
  • Videos (1)
  • Photos
  • Why etrailer?

LubriMatic Tools - L11465

  • Grease and Lubricants
  • Brake and Bearing Grease
  • Standard Bearing Grease
  • LubriMatic
  • Polyurea - Conventional
  • 14 oz
  • Petroleum-Based

This LubriMatic polyurea-based grease meets high-temperature requirements for wheel bearings for all disc and drum brake applications.


Features:

  • Resists high temperatures
  • Formulated with polyurea
  • Rated GC-LB by the NLGI - the highest possible rating in its class
  • Made in USA


Specs:

  • Quantity: 14-oz cartridge
  • Application: wheel bearings for disc brake and drum brake applications
  • NLGI grade: #2 (about the consistency of peanut butter)
  • Drop point: 520 degrees F
  • Meets Ford specification MIC 198-A


11465 Plews & Edelmann LubriMatic Wheel Bearing Grease for Disk and Drum Brake Applications - 14-oz Cartridge







Video of LubriMatic Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for LubriMatic Tools - Grease and Lubricants - L11465 Review

Today we're going to be taking a look at the LubriMatic disc and drum brake and wheel bearing grease. The grease is recommended for wheel bearings, discs, and drum brakes, chassis lubrication, virtually all automotive and industrial applications. The grease is specifically formulated for extreme temperature and pressure conditions. It's also designed to resist water and oxidation. Base type is polyurea. It's rated NLGI number 2GC-LBNASTMD-4950.

It's fully made in the USA. This is a 14 ounce cartridge. It's got the easy opening lid right here. This gives you a look at the color of the grease. It's a turquoise, bluish green color.

It also says right here, it's got an arrow indicator that says, "Insert this end first into the grease gun." The drop point is 520 degrees Fahrenheit, and that's simply the temperature before the grease liquefies. That's going to do it for today's look at the LubriMatic disc and drum brake and wheel bearing grease.


Customer Reviews

LubriMatic Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge - L11465

Average Customer Rating:  4.8 out of 5 stars   (42 Customer Reviews)

This LubriMatic polyurea-based grease meets high-temperature requirements for wheel bearings for all disc and drum brake applications.

- L11465
by:

Worked as expect. Fit into my standard grease gun 254507



- L11465
by:

We used this brand of grease for many years,having good result and no problems. Good quality grease !!!. 311448



- L11465
by:

It still works and because of that 5 stars! 627727



- L11465
by:

This grease has worked very well for my salt water boat trailer for many years. Quick on time delivery. The staff is very helpful and knowledgeable . 560443



- L11465
by:

Works great for trailer bearings, thanks, jeff 241847


Comments

Its working great, no bearing failures, thanks !!

Jeff B - 03/26/2017

22968

- L11465
by:

was referred to this product by my rv d ealer. 571713



- L11465
by:

Good grease, very slippery. 463265



- L11465
by:

Had ordered brakes for my travel trailer and in a few days I got them. No problems with the packaging and I got free shipping. Service was excellent and I would highly reccomend etrailer for parts. I would definitely buy from them again. 417775



- L11465
by:

We recently placed an order for several items. However, an issue arose with an out of stock item. Ensuring that the order would not be delayed, the etrailer team substituted a comparable product. This makes for great customer service. Sometimes the test of a company is how they respond to issues that arise. All of the staff that we have dealt with have provided excellent service. They definitely get five stars from us. 432690



- L11465
by:

Before I ordered any grease from anyone... I checked around on-line for information on what I should be looking for, as far as specifications and usage. Then I checked to see what etrailer. had. I've ordered from etrailer several times before and been very satisfied with the products and the service. This product more than met the requirements I wanted, and I learned from my very first order, the people at etrailer are paying attention! I can't see what this stuff is actually doing... so, I have to believe in who is selling it. 151129



- L11465
by:

I purchased to grease a trailer that I just purchased. Having never done this before, I had no idea how much I needed to do all of the EZ-Lube wheel bearings. I bought one tube and this got me through two wheels. I ended up ordering two more tubes that I'm now waiting on. I think half a tube per EZ-Lube wheel. So two tubes for a trailer with four wheels. I ordered an extra tube to make sure. 51424



- L11465
by:

etrailer was where I found the Lubrimatic grease for my trailer bearings. The price was right and the shipping on a small order was only 4.99. This arrived in 3 days with standard shipping. Thanks for the great turnaround time. 424173


Comments

very good

Foster T - 08/24/2018

42736

- L11465
by:

Great Grease! I prefer this in trailer bearings that do not need marine grade grease. I cannot buy this grease in tubes locally and only one store sells this by the small can. I made sure recently to purge the unknown grease out of my camper bearings and replaced with this brand as I know it and trust this product. I wanted to get tubes for my now dedicated grease gun for my trailers and etrailer was the only way to go. etrailer has the best price and ordering tubes allows me to put the same bearing grease into my Bearing Buddies as I packed my bearings with. 92211


Comments

Still working fine. Holds up the way I expect.

Matt W - 01/27/2015

8996

- L11465
by:

THIS GREASE IS SUPPOSE TO BE VERY GOOD. DOWNSIDE IS AVAILABILITY. BEING A POLYUREA CONVENTIONAL TYPE GREASE IT NOT COMPATIBLE WITH THE MORE AVAILABLE GREASE AT AUTO PART STORES, SO YOU BETTER KEEP A CARTRIDGE IN YOUR BACK POCKET AT ALL TIMES. BUYING FROM E-TRAILER IS A PLEASURE. 717438



- L11465
by:

Excellent quality and price. 717385



- L11465
by:

Great company to work with. Great products, prices, and service. 678781



- L11465
by:

High quality grease. Definitely will buy again. Thanks etrailer 661704



- L11465
by:

Quick Shipping and received everything I ordered. 636470



- L11465
by:

High quality grease. Definitely will buy again. Thanks! 523464



- L11465
by:

Great grease 512182



- L11465
by:

Nothing bad to say about product. I use it specifically for greasing our travel trailer bearings. 508871



- L11465
by:

This is the wheel bearing grease recommended by pop up camper maker. The grease tube fit my grease gun perfectly making my grease job very easy and neat. 500653



- L11465
by:

Great product 490304



- L11465
by:

This is the best grease ‘ does not break down stays the same no oil film , hard to find this grease in stores 480186



- L11465
by:

Product works great,had no leaking from my grease gun unlike some others I have used. Reccomend this product. 424658



- L11465
by:

Great product and very "sticky" which is exactly what I want for hard use applications. I originally bought this to repack wheel bearings but was so impressed with it that I now keep it in my grease gun to lubricate my farm equipment. 408877



- L11465
by:

Order arrived very quickly. Placed on Friday, arrived on Tuesday from Mo to Pa. Items were packed well and arrived in good condition. Upon initial inspection all items appear of good quality. Ordered tires, brakes with backing plates, hubs ,seals and grease. Haven't installed any items yet, but I am sure I will have no issues. Free shipping is a plus. Additionally unlike other free shipping offers that are out on the back burner for a week, order was processed and shipped promptly. I have recommended etrailer to friends and would highly recommend them to anyone. 373542



- L11465
by:

Thank you for the fast delivery. 370776



- L11465
by:

Good, high quality grease for my trailer hubs. 365951



- L11465
by:

Great product and quick shipping 358100



- L11465
by:

So far so good 319631



- L11465
by:

Super fast shipping. 318152



- L11465
by:

great product and fast service 266364



- L11465
by:

Always used this grease, holds up well. Trailer is in water every weekend. 258437



- L11465
by:

Good Product 253531



- L11465
by:

Grat info and good communication from E Trailer. 193629



- L11465
by:

A must have for disk brake users. Other grease types leak out the seals where this stuff stays put 183578



- L11465
by:

as always e-trailer ROCKS!!! 181120



- L11465
by:

Have problem with new wheel bearing. I checked both on the spindle before installing in the hub/drum. One was OK the second would not go. Saved if you would need to see it. The rest of the installation went well. Good delivery time 156600



- L11465
by:

Have used this grease for years, stands up good to water. It is all I use in the bearings on my off road trailer, never had a problem. 147392


Comments

still works great, no problems at all

Mark E - 08/19/2015

14379

- L11465
by:

Product arrived in good shape and was exactly as described. 143595



- L11465
by:

Like this grease for my pop up trailer bearings 52154


42
42

Ask the Experts about this LubriMatic Tools

Do you have a question about this Tool?


  • Pre-Greased Replacement 5-on-5 Hub for 3500-lb Dexter Axle
  • You can confirm the weight rating of your Dexter axle by removing one hub and pulling its bearings. The included photo shows how part numbers usually appear on bearings. The specific bearings used will tell you the axle's weight rating. Just refer to the linked article that lists the bearings commonly used for various axle weight ratings. A new hub must use the same bearings as the original hub in order to fit on your spindles. A 3500-lb axle commonly uses bearings # L68149 and #...
    view full answer...

  • Needing Wheel Bearing Kits for Lippert 5,200 Lbs Axles
  • We carry two different wheel bearing kits for 5,200 Lbs axles. The difference between the two set is in the inside diameter of the grease seals. One kit, # BK3-300, uses a grease seal the measures 2-1/4 inches I.D. The other kit, # BK3-310, has a seal the measures 2-1/8 inches I.D. You will need to measure your current seals to see which kit will work for your application. Both kits will include bearings, seal, and race cups. One kit per wheel. I also recommend LubriMatic Bearing...
    view full answer...

  • Timbren Axle-less Suspension for Off-Road Tear Trailer
  • Yes, it looks like you've made a great choice. The Timbren Axle-less Suspension # ASR1THDS03, will be ideal for an off-road teardrop trailer. This system is rated at 2200 lb. and will make off-roading much more comfortable as the rebound springs will minimize rattle and bottoming out. The hubs you selected, # AKHD-545-35-EZ-K and the brake assemblies, # AKEBRK-35-SA are a good match. The Timbren Axle-Less suspension system may require additional support on your trailer. If your trailer...
    view full answer...

  • Parts Needed to Add Brakes to Lippert 3500lb Axle on an Utility Trailer
  • We have the parts that you will need to add brakes to you Lippert 3,500lbs axles. For the brake assemblies, I recommend the Electric Trailer Brake Kit, # AKEBRK-35-SA. This kit includes both the left and right brake assemblies and will bolt right to your 4 hole brake flange that is already on your axle. The brakes are self-adjustable and will only need an initial set-up at installation. The drums that you will most likely need will be # AKHD-545-35-K. This drum will include bearings,...
    view full answer...

  • What is the Length of the Trailer Idler Hub Assembly # TA88545-2
  • I went out to the warehouse and found that the total length of the Trailer Idler Hub Assembly # TA88545-2 is 4-1/4". If you have a straight spindle with a diameter of 1-1/16" then the 2 # L44649 bearings should fit just fine, just note that the grease seal has an inner diameter of 1.50" so you will need to make sure that corresponds to what you have. If all of that checks out then this hub will fit! Always use the same grease that you used the last time that everything was greased. Different...
    view full answer...

  • Recommended Grease To Use with Bearing Kit for BT8 Spindles
  • The LubriMatic Wheel Bearing Grease part # L11380 for the can or part # L11465 for the cartridge is what I recommend using with any of our wheel bearings such as the Bearing Kit with Grease Cap for BT8 Spindles part # DL21792. In order to lube the bearings you will need a bearing packer, the LubriMatic Deluxe Bearing Packer part # L70025 is simple and easy to use.
    view full answer...

  • Recommended Hub Assembly for 1 Inch Axle Spindle
  • We have the complete assemblies available with the races installed, but you still will need to install the bearings and seal to attach to your spindle. I recommend the Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 # AKIHUB-440-2-2K or the 5 on 4-1/2 bolt pattern # AKIHUB-545-2-2K. These will both fit 1 inch spindles and have all the needed parts, so you just pack the bearings and install on your spindle. For grease use # L11465 for grease packer use # PTW1218.
    view full answer...

  • Grease Fitting Locations for Curt A20 Fifth Wheel Hitch
  • The zerk fittings for the Curt A20 hitch part # C16140 are located on the front of each jaw.The jaws must be in the closed and locked position for the zerks to be accessible. They are kind of hard to see but I attached a picture that points them out. Curt recommends high pressure grease like the part # L11465. If you need a grease gun we have part # L30200.
    view full answer...

  • Needing Bearing and Seal Replacement for Lippert Axle
  • I found a bearing and seals that will fit your Lippert Axles. According to the manufacturer on the 5,200 lbs axles, the outer bearing number is # LM67048, the inner bearing is # 25580 and the grease seal will be 10-36, # RG06-070. Now, before you order your parts, you will need to remove the wheel and hubs to inspect the bearings to see if the bearing numbers are match to the ones listed above. If they match then you will need # BK3-300. This is a bearing kit that will include both...
    view full answer...

  • Grease That is Used on Pre-Greased Idler Hub Assembly
  • Idler Hub Assembly for 3,500-lb E-Z Lube Axles # AKIHUB-545-35-PG-EZK is pre-greased with LubriMatic Wheel Bearing Grease # L11465, which is made right here in the United States of America. I've added a link to a review video on this grease for you to take a look at.
    view full answer...

  • What is the Replacement Wheel Hub Needed on the Axle of a 1996 Jayco 1207 Popup Trailer
  • We have a hub that will fit your 1996 Jayco popup trailer. The Dexter Trailer Hub assembly, # 8-91-05UC1-EZ, that you referenced will work on your trailer axle. This hub uses the # L44649 bearings and has a 4 bolt lugs. Measuring the current hubs bolt pattern will tell you for sure if this hub will work for you. I have attached an article that will explain how to find what your wheel bolt pattern is on your current hub. If you do not have grease zerks at the end your axle spindles,...
    view full answer...

  • Which Bearing Buddy and Grease for 1700 Lbs Carry-on Utility Trailer
  • Although bearing buddies are primarily meant for boat or PWC trailers, you can certainly use them on a utility trailer. To choose the correct diameter Bearing Buddy use a precise measuring tool like a dial caliper and measure the inner diameter on the hub where the grease cap sits. You will want to match that measurement as closely as possible to the measurement on the Bearing Buddy product pages. I have attached a link to all of our bearing protectors for you to reference. The alternative...
    view full answer...

  • Can Lubrimatic Red Grease be Used for Trailer Wheel Bearings
  • You can use the red grease # L11390 for trailer wheel bearings if you wanted. You can also use wheel bearing grease # L11465 which is designed for use on trailer running gear, including wheel bearings. It also has a slightly higher temperature rating, 520 degrees, compared to 510 degrees for the red grease. When adding new grease you will need to make sure that the new grease is compatible with the old grease or remove the old grease completely. Incompatible greases can break each other...
    view full answer...

  • Needing Brakes, Hubs, Bearings and Seals for a set of AL-KO Axles with 10 X 2-1/4 Inch Brakes
  • The brake assemblies that I recommend to replace your AL-KO brakes are # AKEBRK-35R and # AKEBRK-35L. Theses are the brake assemblies for both the left and right sides of the axle. I like these brake assemblies over the others we carry for two reasons, the shoe pads are machined rather than clipped and the magnets on theses brakes are thicker. The machined shoe pad will wear better and are sturdier than the clipped end shoe pad. The thicker magnet will wear better and in turn last longer...
    view full answer...

  • Needing a Bearing Kit for a Lippert 3,500 Lbs Lippert Axle
  • According to Lippert, the items in # BK2-100 bearing kit are the correct parts needed to replace the bearings on one hub of your Lippert axle. I recommend using the LubriMatic Disc/Drum Brake and Wheel Bearing Grease # L11465 when packing the wheel bearings on your axle.
    view full answer...

  • Recommended Trailer Wheel Bearing Grease for Dexter Axles
  • Usually when you replace parts that get lubricated, you clean all of the existing grease first before adding any new grease, just in case there is a compatibility issue. Since you are using Dexter axles and replacing components with Dexter parts, the grease will be compatible. For wheel bearing grease, use LubriMatic Disc/Drum Brake and Wheel Bearing Grease, # L11465, or # L11380. This is a polyurea-based grease that is compatible with most grease formulas of the same or similar chemical...
    view full answer...

  • How to Pack Grease On Trailer Hub with EZ Lube Spindle
  • When you are assembling the hub components you want to make sure you fill every space of the bearings with grease like part # L11465. To make this easier you can use a bearing packer like part # L70025. If you do not have one, you can use a grease gun like part # L30200. After you have packed the bearings you will want to apply a thin layer of grease to the spindle before installing the remaining parts. Then, insert your bearings and grease seal in the hub and mount your hub on your...
    view full answer...

  • What is the Recommended Maintenance Schedule on a Trailer
  • The recommended schedule to grease your wheel bearings is every 12 months or 12,000 miles, whichever comes first. You can use the red grease # L11390 for trailer wheel bearings if you wanted. You can also use wheel bearing grease # L11465 which is designed for use on trailer running gear, including wheel bearings. It also has a slightly higher temperature rating, 520 degrees, compared to 510 degrees for the red grease. When adding new grease you will need to make sure that the new...
    view full answer...

  • Recommended Hub Components For Dexter 4,300-Lb Axle On 2013 Airstream Trailer
  • I found the components you need for your Dexter axle on your Airstream trailer. The grease seal you need is part # RG06-070. The inner bearing is part # 25580. The inner race is part # 25520. The outer bearing is part # LM67048, and the outer race is part # LM67010. I have also attached a helpful article that explains how to replace hub components. To make the job of packing the wheel bearing much easier I recommend a bearing packer like part # L70025. For grease I recommend part...
    view full answer...

  • Spindle and Hub Combination to Fit 4.80 X 12 Tires and Wheels on a BBQ Grill Build
  • When manufacturing axles for a wagon/trailer you will need to measure the inside of the square tube that you will be using for the axle. Once you know this measurement then you can pick the correct spindles and idler hubs. One spindle that would work well for your build would be Redline 1-1/2 Inch Square X 4 Inch Spindle # SP204BT8. This spindle has a square mount shank that will fit an 1-1/2 square tube. This spindle will have to be welded to the axle. It is recommend that this be done...
    view full answer...

  • How to Identify What Wheel Bearings and Grease Seals are Needed on Trailer Axles
  • Pulling the wheels and hubs off of your 5th wheel trailer is the best option when trying to identify what wheel bearings and seals are installed. On the back of the wheel bearings there usually is printed a part number like # L44643. With these numbers you will be able to identify the correct wheel bearings on your trailer's axle. Using the attached FAQ article, match the bearing numbers and you will be able to find the correct bearing & seal kit for your trailer. In some instances...
    view full answer...

  • What Type of Wheel Bearing Grease Should I use on Aluma Flatbed Trailer
  • The dealer was partially correct, you should re-grease your bearings once each year. This is considered standard maintenance for any trailer. As far as the high-temp grease vs. standard grease, that sounds like they may have been trying to drum up some business for themselves. There is no problem using standard bearing grease on your Aluma flatbed trailer. We frequently use the LubriMatic Wheel Bearing Grease, # L11465, on the utility, flatbed, livestock style trailers that come into...
    view full answer...

  • Recommended Stub Axle Wheel And Tires For 200 lb Restroom Trailers
  • For your restroom trailer stub axle and wheel/tire kit request, I recommend the Redline Spindle 1-1/2" Square x 4" Long Stub, for 2,000 lb. Trailer Axles # SP204BT8. This will give you a flat surface for welding. For the hub assemblies, I recommend the Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 # AKIHUB-440-2-1K. This assembly includes the bearings, races, seal, and grease cap. You will also want grease like # L11465. For your wheels, I recommend the Kenda 4.80/4.00-8 Bias...
    view full answer...

  • What Type of Grease is the Trailer Hub # AKIHUB-545-35-PG-EZK
  • The grease that is in the hub part # AKIHUB-545-35-PG-EZK is the wheel bearing grease part # L11465. This grease is polyurea-based.
    view full answer...

  • Recommended Grease for Trailer Brakes and Bearings
  • There are many options out there. LubriMatic Disc/Drum Brake and Wheel Bearing Grease # L11465 is a great one. You can use it on disc or drum brakes. It can also be used to grease wheel bearings.
    view full answer...

  • Recommended Hub And Drum Assembly For Dexter 5200 lb Axles
  • The self adjusting brakes need an initial adjustment when you install them and then the self-adjusting will kick in. If you have already done the initial adjustment, the 5 mile trip should allow your brakes to work properly. If the brakes are not working properly, it may be a sign that your drums assemblies are worn down or it may just mean you need to adjust your electric brake controller settings. If you want to ensure you have working bearings, seals, and hubs, I recommend the...
    view full answer...

  • Recommended High Temperature Wheel Bearing Grease for EZ Lube Spindles
  • The green or blue greases are usually a synthetic grease with color added for identification or brand recognition. For your application, I recommend the LubriMatic Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge # L11465 which works with a grease gun like # L30200. This will work perfectly on your EZ Lube spindles.
    view full answer...


Do you have a question about this Tool?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality tools for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tool information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael L
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Cole B
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.