UltraLube Biobased Spray Lubricant and Penetrant - 12-oz Aerosol with Straw

UltraLube Biobased Spray Lubricant and Penetrant - 12-oz Aerosol with Straw

Item # L10444

lowest price pledge

Retail:$13.99

Our Price: $9.85

You Save: 30%
Tools

Orders above $99 qualify for Free Shipping

Shipping Weight: 1.07 lbs

Quantity: 
In Stock
LubriMatic Grease and Lubricants - L10444
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Videos


  • Grease and Lubricants
  • Multi-Purpose Lubricant
  • LubriMatic
  • Bio-Based
  • 12 oz
This eco-friendly, biobased spray lubricant provides a safe, effective alternative to traditional products like WD-40. Now you can take care of all those little household tasks knowing that you are safeguarding the Earth as well. Lowest Prices for the best tools from LubriMatic. UltraLube Biobased Spray Lubricant and Penetrant - 12-oz Aerosol with Straw part number L10444 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (61)
  • Q & A (76)
  • Videos (1)
  • Photos
  • Why etrailer?

LubriMatic Tools - L10444

This eco-friendly, biobased spray lubricant provides a safe, effective alternative to traditional products like WD-40. Now you can take care of all those little household tasks knowing that you are safeguarding the Earth as well.


Features:

  • Biobased penetrating lubricant performs better than many similar, petroleum-based products
    • Higher viscosity won't thin down at high temperatures
    • 4 Times the lubricating power means less friction, less heat and less wear on your equipment
    • Lower overall operating temperature is safer
  • Less harmful to the environment than petroleum-based oils and greases
    • Biobased and biodegradable
    • Renewable - made from US-grown crops
    • Non-toxic - safe for use around your house
  • Made in the USA


Specs:

  • Quantity: 12-oz aerosol can
  • Formula: biobased lubricating/penetrating spray


Applications:

This general-purpose penetrating oil lubricates, penetrates and frees stubborn rusted parts and rustproofs exposed metal. It lubricates anything around the house with axles, rollers, hinges or slides. It penetrates and lubricates rusted bolts and nuts so you can get them apart. It also lubricates moving parts on tools and provides a protective coating on metal items that are subject to forming rust. It's like WD-40, but it's better for the environment.



L10444 Plews & Edelmann Ultra Lube Bio-Based Penetrating Lubricant - 12 oz

L10444 Installation InstructionsInstallation Details L10444 Installation instructions



Video of UltraLube Biobased Spray Lubricant and Penetrant - 12-oz Aerosol with Straw


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Edelmann UltraLube Spray Lubricant Review

Today we're going to review the Edelmann ultra lube bio-based spray and penetrant lubricant, part number L-1-0-4-4-4. Our ultra lube comes in a nice, aerosol can and includes a smart straw. We take the straw off, pop off our cap, we can put the ends in the nozzle. This will allow us a more precise spray of our lubricant, versus if we take the straw off, we get a wider, more volume spray. A fact about our ultra lube is it has four times more lubricity in the penetrant than your standard WD-40 or PB blaster lubricants. Another really nice feature about the ultra lube is it can operate at a higher working temperature. This will help to keep the equipment or tool cooler, avoiding damage or possibly even breakage. The ultra lube is a bio-based lubricant, which is made from US-grown crops.

This makes it safe to use, even around the house, because it's eco-friendly. It's good for both commercial and light-duty household applications. Here we can use it on a well nut, or any rusty nut for that matter. Simply spray it down and it will make it easier to install your hardware or remove your hardware if it's rusted into the nut. Whether using around the house or in a commercial application, another use could be here on your garage door hinges. Whether you're spraying the hinge itself or the roller in track. Another good use for our spray lubricant is on a squeaky door hinge.

A little bit of lubricant worked in to the hinge can take care of any squeaky or stickiness in that hinge. That will do it for our review of the Edelmann ultra lube bio-based spray lubricant, part number L-1-0-4-4-4.


Customer Reviews

UltraLube Biobased Spray Lubricant and Penetrant - 12-oz Aerosol with Straw - L10444

Average Customer Rating:  4.8 out of 5 stars   (61 Customer Reviews)

This eco-friendly, biobased spray lubricant provides a safe, effective alternative to traditional products like WD-40. Now you can take care of all those little household tasks knowing that you are safeguarding the Earth as well.

- L10444
by:

I like this stuff - I am a locksmith and you hardly can find this in the hardware stores. Non toxic! 576426



- L10444
by:

Excellent product. I use it to lubricate my exercise machine and anything else around the house that needs lubricating. It lasts longer than other lubricants I have tried. I also like that it is biodegradable and safe for the environment. 577208



- L10444
by:

v good 575276



- L10444
by:

Great lubricant that was easy to clean off of tools. 542155



- L10444
by:

Best penetrant and earth friendly. Great product and fast service. Thank you. 473815



- L10321
by:

Review from a similar LubriMatic Green Series in Tools


Used this when I replaced the wheel bearings last year on my travel trailer. It has held up well. 482118



- L10333
by:

Review from a similar LubriMatic Green Series in Tools


Would rather it be more tacky. Almost runs at room temp. 255212


Comments

So far so good.

Keith G - 06/01/2017

24464

- L10321
by:

Review from a similar LubriMatic Green Series in Tools


Was a pleasure doing business with the folks at etrailer. The customer experience from start to finish is top rate, and support along the way and beyond is excellent. 407477



- L10320
by:

Review from a similar LubriMatic Green Series in Tools


was just what I expected. Now along with the Bearing Buddies I can keep the bearings on my trailer greased. 379939


Comments

All is great with red grease and bearing buddies

Lynn Y - 05/13/2018

38452

- L10307
by:

Review from a similar LubriMatic Green Series in Tools


Used this to lube some cork on a rewind arm of an Eiki 16mm projector. Did the job well. Wish it came in a smaller package. 38124



- L10321
by:

Review from a similar LubriMatic Green Series in Tools


Cool red grease. seems to provide... lube. :) 268546



- L10314
by:

Review from a similar LubriMatic Green Series in Tools


Used this on the supply and rewind shafts on a 16mm projector. Stays put, does the job well. I wish they'd sell it in a little smaller tube. 38122



- L10320
by:

Review from a similar LubriMatic Green Series in Tools


My first order from etrailer went through a couple of different distributors and arrived at my door just like the package in the beginning of the movie "Pet Detective". I called Donna back about the damage and she asked that I open the box and take her a couple of pictures of the cartridges. I did, and she immediately started me a second shipment of the same product, requesting that it be double boxed and labeled "fragile". The second shipment arrived via UPS and the carton was perfect. Donna asked that I get back in touch with her when the second shipment arrived to deal with the return of the damaged first. When I called Donna, she made sure that I was pleased with the second shipment, and stated for me to do whatever that I wanted with the damaged first order. Thank you Donna and etrailer for your assistance and understanding of my first botched, damaged order. I will use etrailer in the future for more of my trailer needs. 465306



- L10320
by:

Review from a similar LubriMatic Green Series in Tools


an upgrade from the original grease on the trailer i'm working on. so far so good 387549



- L10321
by:

Review from a similar LubriMatic Green Series in Tools


I've been using LMX Red Grease on my Aliner camper wheel bearings for several year and really trust this product. 36321



- L10320
by:

Review from a similar LubriMatic Green Series in Tools


Drop point is a little less that Lucas Red and Tacky, but still a good product. 486319



- L10333
by:

Review from a similar LubriMatic Green Series in Tools


Perfect fit... easy installation ...quick delivery - All for less than half the price of what the local trailer supplier wanted to charge. 323681



- L10320
by:

Review from a similar LubriMatic Green Series in Tools


The parts (trailer brakes and supplies for initial brake install) were delivered ahead of schedule, they were all in good shape, and they have all worked great. 642731



- L10300
by:

Review from a similar LubriMatic Green Series in Tools


Product was as expected. 633790



- L10320
by:

Review from a similar LubriMatic Green Series in Tools


Last year I pulled all wheels and hubs on my 5th wheel camper, repacked the barrings and replaced the seals. I used Ultralube LMX red grease. This is a great product, and I will continue to use it. Thanks etrailer for great products. 607859



- L10320
by:

Review from a similar LubriMatic Green Series in Tools


All the products I have purchased from Etrailer have been good. Quailty, durable products, fast shipping and easy transactions. Etrailer.com has pretty much any product you need for your trailers. Thank you Etrailer! 602625



- L10307
by:

Review from a similar LubriMatic Green Series in Tools


As always, AWESOME shipping from etrailer! This bio-based grease was bought to silence a very noisy tree stand seat hinge. Not very many lubricants work as well when the mercury really drops. After scaring off 3 deer (the hinge made a noise that sounded like 2 rabbits being skinned alive), it was time to address the problem. Thanks, etrailer! 599682



- L10307
by:

Review from a similar LubriMatic Green Series in Tools


Good product. Just as advertised. Etrailer service excellent as usual. 557989



- L10320
by:

Review from a similar LubriMatic Green Series in Tools


I have not used or opened it yet. I think it is what I want. I will use it on my boat trailer bearings. 542791



- L10320
by:

Review from a similar LubriMatic Green Series in Tools


Seems to be high quality grease. 522228



- L10333
by:

Review from a similar LubriMatic Green Series in Tools


So far so good. I ordered a bunch of stuff from several sites the night I got my brake parts. etrailer was the fastest order for fillment and the first on my porch by far. Everything fit like it was supposed to and this far seems to be working well. Can’t ask for more then that 516561



- L10320
by:

Review from a similar LubriMatic Green Series in Tools


So far so good. I ordered a bunch of stuff from several sites the night I got my brake parts. etrailer was the fastest order for fillment and the first on my porch by far. Everything fit like it was supposed to and this far seems to be working well. Can’t ask for more then that 516562



- L10320
by:

Review from a similar LubriMatic Green Series in Tools


Great company to do business with. 488031



- L10333
by:

Review from a similar LubriMatic Green Series in Tools


Great service! Great company! 469798



- L10320
by:

Review from a similar LubriMatic Green Series in Tools


Good quality. Thanks 469172



- L10321
by:

Review from a similar LubriMatic Green Series in Tools


Good quality. Thanks 469171



- L10320
by:

Review from a similar LubriMatic Green Series in Tools


No complaints so far. I chose this product based off other reviews, as well being bio-based, I felt it was a safer option for our lakes (for use on a boat trailer). 464283



- L10320
by:

Review from a similar LubriMatic Green Series in Tools


received in good shape and fast shipping folks at etrailer great to deal with THANKS! 448632



- L10321
by:

Review from a similar LubriMatic Green Series in Tools


All products came fast and just as orde red 445999



- L10321
by:

Review from a similar LubriMatic Green Series in Tools


Still not sure about using this over other products. It being bio base. Plan to repack next month 442881



- L10321
by:

Review from a similar LubriMatic Green Series in Tools


Good stuff 413121



- L10321
by:

Review from a similar LubriMatic Green Series in Tools


etrailer company and staff are the best. Web site very informative and the staff is very well informed in all areas of the products they sell. Won't deal with anyone else. 412231



- L10307
by:

Review from a similar LubriMatic Green Series in Tools


The lube works great and as advertised. Product was received promptly. Personnel who took order were friendly, supportive and professional. 410259



- L10321
by:

Review from a similar LubriMatic Green Series in Tools


Product arrived as scheduled and worked great for packing the new bearings and hubs. 392158



- L10321
by:

Review from a similar LubriMatic Green Series in Tools


Good stuff 391146



- L10307
by:

Review from a similar LubriMatic Green Series in Tools


I ordered this for the bushings on my new B and W fifth wheel hitch. I've also found other uses for this grease as well. Thanks again etrailer!! 389993



- L10333
by:

Review from a similar LubriMatic Green Series in Tools


have not repacked my wheel bearings yet,but looks like a quality grease with the proper rating for trailer axle bearings. 353149


Comments

very high quality grease.is working great.

scott a - 03/20/2018

36197

- L10314
by:

Review from a similar LubriMatic Green Series in Tools


Recommend lube for Blue Ox hitch. 342456



- L10321
by:

Review from a similar LubriMatic Green Series in Tools


Good grease. 340925



- L10321
by:

Review from a similar LubriMatic Green Series in Tools


Great experiance agein,fast shiping and right product!! Thanks 338175



- L10302
by:

Review from a similar LubriMatic Green Series in Tools


have used Lithium for decades 296346



- L10320
by:

Review from a similar LubriMatic Green Series in Tools


It's all good it's still on my camper t railer 293234



- L10314
by:

Review from a similar LubriMatic Green Series in Tools


Thought it had more molbdenum in it as like anti-seize. Basically just axle grease. 275683



- L10320
by:

Review from a similar LubriMatic Green Series in Tools


Grease was real greasy....and red too 229680



- L10320
by:

Review from a similar LubriMatic Green Series in Tools


Excellent product - keeps us moving. 206899


50
61
Show More Reviews

Ask the Experts about this LubriMatic Tools
Do you have a question about this Tool?


  • Cleaning Weld Nuts Prior to Installation of Hitch on 2006 Toyota RAV4
  • The Draw-Tite Max-Frame Trailer Hitch Receiver # 75235 is a confirmed fit for your 2006 Toyota RAV4. It utilizes bolt M12x1.25x40 so yes, that tap is correct. However, before you re-rap your threads I recommend using Nylon Tube Brush - 1/2" # 814092 and lubricant # L10444. I've attached an article to assist further with cleaning weld nuts.
    view full answer...

  • Uninstalling Old Cam-Action Locking System on Trailer
  • Sorry to hear about your trailer getting broken into. From the picture that you sent it looks like your problem is that your setup is a bit rusted. I recommend using the UltraLube Biobased Spray Lubricant and Penetrant # L10444 to help loosen up the rusted bolts. You may want to try to spray some of the UltraLube into the bolt hole as you are loosening the bolt, and definitely after the bolt is removed. This should enable to you install your ned Cam-Action Kit, like part # PLR458-018. You...
    view full answer...

  • Comparing Trailer Hitches For 2016 Mitsubishi Outlander
  • The Draw-Tite and Curt hitches have the same style and same rated capacities. The only edge one way or the other is the integrated trailer wiring bracket on the Draw-Tite # 75888 or the fact the Curt # C13163 is made in the USA. If you will be using a 4-way trailer hitch connection, then I recommend going with the Curt hitch as you won't need that mount. Both come with bolts for installation. You may want the Nylon Tube Brush - 1/2" # 814092 and # L10444 to clean your factory frame...
    view full answer...

  • Ground Clearance on Curt C12225 vs Draw Tite 36241
  • We had the opportunity to test fit hitches on the Pontiac Grand Prix and found that the hitch with the greatest clearance was the Draw-Tite hitch, # 24660. From the bottom of the receiver to the ground was right around 9" on this hitch. The other two hitches, Draw-Tite # 36241 and Curt # C12225 both had just 7 1/2 inches of clearance from the bottom of the receiver to the ground. So, your best bet will be Draw-Tite hitch # 24660. For the installation, it will be helpful to have a nylon...
    view full answer...

  • Troubleshooting Fitting M12-1.75X40mm Hex Bolts for etrailer.com Hitch on a 2009 Chevy Equinox
  • The M12-1.75 x 40mm hex bolts that come with the etrailer.com Trailer Hitch Receiver # E98865 should fit the weldnuts on your 2009 Chevrolet Equinox as they have been tested and confirmed to work with your specific vehicle. A lot of times weldnuts get debris in them which makes starting the bolts pretty difficult. If you haven't already tried spraying penetrating oil like part # L10444 and letting it soak for 5 minutes then cleaning it with a brush like part # 814092, do that and see...
    view full answer...

  • Hitch Removal and Recommendation for Hitch on 2019 Subaru Outback
  • Removing the Draw-Tite hitch from the 2015 Audi Q5 should not be a problem for you. I recommend spraying the fasteners with a spray lubricant such as part # L10444 then removing the bolts with a wrench. We do have hitches that will fit the 2019 Subaru Outback but the Draw-Tite hitch for the Audi will not fit. I recommend Draw-Tite part # 76227 instead. The Draw-Tite hitch is one of the least invasive installations because it does not require drilling into the frame. However, the installation...
    view full answer...

  • Do the Exhaust Hangers on a 2019 Mazda CX-5 Need to Be Removed for the Draw-Tite Hitch 76138
  • In order to install the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76138 on your 2019 Mazda CX-5 you will need to lower the exhaust by removing the metal exhaust hanger studs from the rubber isolators. This can be done with the isolators left on the muffler side or on the vehicle side, it does not matter which you choose but I find it easier to leave them on the muffler side. In order to remove them you will need to spray a bit of lubricant like part # L10444 inside the rubber and...
    view full answer...

  • Recommended Lube for Keeping 2015 StarCraft AR-ONE Travel Trailer
  • With your main door hinge binding and causing bending on the door frame, you definitely want to solve the issue before any major damage is done. The Replacement Entry Door Hinge for RV - 6 Leaf - White # LC198295 would be a wise investment. If you want to try to lube your current hinge before replacing, I recommend using the UltraLube Biobased Spray Lubricant and Penetrant - 12-oz Aerosol with Straw # L10444. This will allow the oil to get into all the crevices to allow smoother...
    view full answer...

  • Hitch Recommendation for 2014 Buick Enclave Which is Hidden and Allows Fascia to be Reinstalled
  • The Draw-Tite Max-Frame Hitch # 75528 installation allows the fascia to be reinstalled on the 2014 Buick Enclave. This hitch is barely visible and looks great on the back of the vehicle. I've attached a photo of the hitch installed on a 2014 Enclave and a video of this hitch being installed so that you can get an idea of what it entails. You will definitely need a nylon tube brush like # 814092 to clean the weld nuts on your 2014 Enclave. Dirt and road grime can build up over time in...
    view full answer...

  • Changing Damaged Locks on a Fastway (Diversi-Tech) Adjustable Ball Mount
  • The kit that you will need so that you can remove the Self-Locking Adjustable Aluminum Ball Mount, like part # DTALBM6625, is the Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts # DTLBM02RK. This comes with 2 locks and the replacement parts that you will need along with instructions on how to change out the locks. You will also need a spray lubricant like UltraLube Biobased Spray Lubricant # L10444 to help loosen up the locks. I have also attached some...
    view full answer...

  • Tools Required To Install Reese Strait-Line Weight Distribution System # RP66084
  • The Reese Strait-Line Weight Distribution System w Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW # RP66084 will require limited tools for installation. You will need 3/4 inch socket, a 1/2 inch socket, and matching open end wrenches. You will also need a torque wrench like # ALL944001. You will also need two drill bits: 7/16 inch and 17/32 inch. The manufacturer also recommends an 8-10 inch c-clamp, tape measure, and penetrating oil like # L10444.
    view full answer...

  • Ideas for Removing Difficult Rear Bump Stops on a 2002 Ford F-150
  • Any time I am having problems removing difficult suspension components I usually apply liberal amounts of lubricant, such as, LubriMagic Green Series Biobased Spray Lubricant, part # L10444, let it soak in for a minute and then try again. If possible try using a cheater bar to give you more leverage, which would give you additional torque to remove the old bump stops. If you are not sure what a cheater bar, it is typically a long pipe that will fit over your wrench or ratchet that will...
    view full answer...

  • Trailer Hitch Installation on 2010 Chevrolet Traverse With Rusted Weld Nuts
  • Installation of a hitch like Draw-Tite # 75528 in your 2010 Chevrolet Traverse whose frame weld nuts are rusted out will require some special attention. My contact at Draw-Tite recommends that you try cleaning out the weld nuts. Often weld nuts can be brought back to a serviceable condition. First, you'll want to spray a penetrating lubricant (PB Blaster, WD40 or UltraLube # L10444) into the nuts and allow it to work overnight. You can repeat this step for a few days if time permits....
    view full answer...

  • Recommendation for Freeing Seized Lock Cylinder on Ball Mount
  • Of your key operated hitch similar to the Fastway ball mount # DTALBM6625, you are wise not to use leverage as the primary tool as it could damage your key, lock cylinder or both. I recommend you use the UltraLube Biobased Spray Lubricant and Penetrant - 12-oz Aerosol with Straw # L10444 on the lock cylinder and then use a rubber mallet to allow vibration to help it work into the cylinder locking mechanism. Allow it to sit and repeat as necessary until the key is able to be used to free...
    view full answer...

  • How to Clean Weld Nuts Inside the Frame of a 2015 Honda Odyssey
  • In order to clean out the weld nuts inside the frame of your 2015 Honda Odyssey you can use the UltraLube Biobased Spray Lubricant and Penetrant part # L10444 along with the Nylon Tube Brush part # 814092. If you were very careful you could also use an M12 thread tap but this should only be used if the bolts will still not thread in correctly after extensive cleaning as you run the risk of cross threading.
    view full answer...

  • What Are Weldnuts And What Hitch Will Fit A 2001 Dodge Van Using The Existing Weldnuts
  • Weldnuts are the nuts that a mounting bolt will thread into and are welded to the holes on the inside of the vehicles frame. Usually it is just a nut inside the vehicle frame but it might be a plate with threads. Removing the weldnuts might be very difficult since they are located inside the vehicles frame and hard to access. I am sending a link to a video that will show how to remove corrosion inside a weldnut. This video will show you the weldnut in the frame. On your 2001 Dodge...
    view full answer...

  • Cleaning Rusty Bolt Holes to Install Curt Trailer Hitch Receiver # C13068 on 2002 Honda Odyssey
  • I want to start by thanking you again for your recent order. We appreciate your business. When it comes to installing the Curt Trailer Hitch Receiver, # C13068, on your 2002 Honda Odyssey, it is best to just clean out the bolt holes on your frame instead of using a tap. You will want to start by soaking the bolt holes on your frame with a penetrating lubricant like UltraLube, # L10444, or WD-40. Let the lubricant soak in and then use a wire brush, like part # 814092, to scrub out the...
    view full answer...

  • Troubleshooting Curt Gooseneck Hitch Ball Stuck in Bed of 2016 Ram 2500
  • The Curt Underbed Gooseneck Trailer Hitch for Ram 2500 # C60614 sounds like the hitch ball has been damaged. I recommend first using a penetrating oil like the UltraLube Biobased Spray Lubricant and Penetrant - 12-oz Aerosol with Straw # L10444 to spray into that hitch ball lever and also around the edge of the hole on the top and bottom. Use a little vibration from a rubber mallet to let the oil find its way into all the bound locations. Let sit for a few minutes and then try again....
    view full answer...

  • Reasons for 1 Hour 10 Minute Install Time for the CURT Hitch # 13013 on a 2002 Toyota Tacoma
  • There are actually 6 bolts connecting the CURT trailer hitch # 13013, to the frame on the 2002 Toyota Tacoma, and the factory bumper will need to be removed and reinstalled to complete the installation. This will require disconnection and reconnection of the license plate light wiring, and correctly repositioning the rear bumper to complete the installation. Although the installation requires 1hr 10min to complete this is not a difficult installation to undertake. One tip I can offer...
    view full answer...

  • Replacing Frozen Diversi Tech or Fastway Locks that are Frozen and Not Working
  • I reached out to my contact at Fastway/ Diversi Tech and he said the only replacement key for your current lock cylinder is # DTKEYR5519. If your cylinder is locked up, he suggests using air tool oil or I suggest a penetrating oil like # L10444. The final option is to replace the locks with the Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts - 2 Locks # DTLBM02RK.
    view full answer...

  • Replacement Mounting Hardware for Trailer Hitch on 2008 Honda Odyssey
  • The Replacement Hardware Kit for Trailer Hitches # RHK is what you will need. You simply type in the part number and select Draw-Tite from the manufacturer. This will get you the spcial spacers, the washers and bolts to fit the factory weld nuts on your 2008 Honda Odyssey. I've attached the photo of the parts because you may be able to get the grade 5 hardware locally but the spacers that are needed may be more difficult. Reese # RP3022 may work but is a different width, the washer...
    view full answer...

  • How to Remove the Curt Pop-In Ball # C60601 with Broken Release on a 2016 Ram
  • I spoke with my contact at Curt who told me that there is an access hole at the bottom of the OEM gooseneck hitch on your 2016 Ram. You are going to look for an aluminum or plastic plug that once removed will allow you to retract the locking mechanism on the Curt Pop-In Ball # C60601. Please note that if you have left the hitch ball in your gooseneck hitch for a while (5 months or more) without applying grease to it then there could very well be some rust that is built up as well....
    view full answer...

  • Troubleshooting Gooseneck Ball Not Releasing From 2014 Ram 3500 With Factory Rail Kit
  • If you have the Curt Ball and Safety Chain Loops Kit for Ram Underbed Gooseneck Hitch # C60618, the pin needs to be lifted and rotated only about 90 degrees to release the steel ball bearing pressure. The Reese Elite Series Pop-In Ball Kit for Ram Under-Bed Gooseneck Hitch # RP30140 has a wider tab that is slightly easier to rotate that same 90 degrees for removal. If the ball will not release when in proper position, I recommend spraying some penetrating oil like the UltraLube Biobased...
    view full answer...

  • Spray Lube Recommendation for Removing Exhaust Hangers
  • In our install videos our installers use the Ultra Lube Biobased Spray Lube part # L10444 for making the removal of the exhaust hangers easier.
    view full answer...

  • Removing Rusted On Bolts for Trailer Hitch Installation
  • The Curt Trailer Hitch Receiver # C12002 for your 2007 Suzuki Grand Vitara uses weld nuts on the inside of the frame rails to attach the bolts and mount this hitch. If there are currently bolts in that location, you will need to remove them and there are a couple of routes to go about doing so. First, I recommend using the UltraLube Biobased Spray Lubricant and Penetrant # L10444 to get into the small crevices to free up the bolt from the nut as dirt and corrosion can cause a bolt...
    view full answer...

  • Lubricant to Aid Factory Bump Stop Removal on 2013 Ford F-250
  • You might try applying some spray-on lubricant like WD-40, PB Blaster or UltraLube Biobased Spray Lubricant # L10444 to the bolt that secures your factory bump stops. This may require repeated applications and some time for the solvent/lubricant mixture to work its way into the threads. Otherwise you might need another set of hands to hold the rubber stop while you apply your wrench or socket.
    view full answer...

  • Enclosed Trailer Door Spring Maintenance On 2013 Carry-On Patriot Trailer
  • The Enclosed Trailer Ramp Spring - Dual, 96" Wide # ERS160D96 has a spring capacity of 160 lbs. You will want to make sure you are within your capacity to keep springs from breaking. You should lubricate the springs with a penetrating oil like # L10444 once or twice a year just like you would garage door springs as well as the cable and rollers.
    view full answer...

  • Troubleshooting Diversi-Tech Ball Mount That Is Locked And Won't Allow Key To Insert
  • The Diversi-Tech ball mount like # DTLBM8400 has the integrated lock surrounded by the metal of the hitch itself. I recommend using some penetrating oil like the UltraLube Biobased Spray Lubricant and Penetrant - 12-oz Aerosol with Straw # L10444 and letting it work its way in to see if you can get that lock aligned so you can remove the hitch with the key. If penetrating oil and vibration from using a rubber mallet won't fix the issue, then you will need to drill out the lock to remove...
    view full answer...


Do you have a question about this Tool?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality tools for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tool information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Theodore B
Video Edited:
Zack K
Written by:
Raymond P
Expert Research:
Michael H
Expert Research:
Jameson C
Video by:
Joshua S
Installed by:
Nicholas E
Video Edited:
Jacob T
Photos by:
Amber A

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.